PROVN OF ATT TOILET IN BLDG NO 427A ECHS AND CONSTRACTION OF FOL STORE AT UNIT MT OF 223 ABOD SURANUSSI UNDER AGE (I) SURANUSSI.

Demolition of brick work built in cement mortar including all quoins arches etc

Taking down chowkats or frames with Shutters ( without taking off the shutter from the frame ) of area n.exc 1.50 Sqm each and removing from site complete all as specified and as directed

Surface dressing not exceeding 30cm deep and averaging 15cm deep and getting out in loose / soft soil all as specified and directed by Engineer - in – Charge.

Excavation in trenches not exc 1.5 m wide and not exc 1.5m deep and getting out in soft/loose soil complete all as specified

M & L for PCC 1:5:10 type using 40mm agg as in foundation complete all as specified and directed by Engr-in-Charge.

M & L for PCC 1:4:8 type D2 using 40mm agg as in foundation filling and mass concrete all specified

M&L Brick work with sub Class'B' Bricks straight or curved on plan to any radius using old size bricks and built in CM 1:6 complete all as specified and directed by Engr-in-Charge.

Returning ,filling in including spreading, levelling,watering and ramming in layers n. exc 25 cm thick each complete all as specified and directed by Engr-in-Charge.

Removal of surplus soil to a distance n.exc 50 m & depositing where directed at a level n. exc1.5 m above the starting point complete all as specified and directed by Engr-in-Charge.

Sepreading and levelling in layers n exc 25 cm thick well ramming including watering as required

M&L for RCCM-25 nominal mix as in footing, plinth beam like all as specified and directed

M & L RCC M-25 as in beams, cantilevers, bressummers, lintels over 1.5mtr clear span, chajja etc all as specified and directed by Engineer - in - Charge.

M & L RCC M-25 as in columns, pillars, piers, posts and struts all as specified and directed by Engineer - in - Charge.

M&L Reinforced cement concrete M-25 (Nominal Mix) in Slabs Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the likeand the like; any thickness; above top of footings; including attached pilasters and buttresses complete all as directed by Engr-in-Charge.

Form work to soffits of suspended slab such as roof slab n. exc 200mm thick (horizontal or sloping ) with fair finished surface complete all as specified

Form work to sides of pillars, posts, struts, piers, columns and stanchions square or rectangular for rough finished surface of concrete all as specified and directed by Engineer - in - Charge.

Form work to edges of concrete flats,treads,floors and roofs n. exc 20cm wide and sides of RCC/PCC bands in wall, horizontal or sloping and similar works exc 10 cm but n.exc 20 cm wide complete all as specified

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) and similar work vertical or to batter copmlete all as specified

Form work to sides and soffits of beams, chajjas and the like for rough finished surfaces complete all as specified and directed by Engineer – in – Charge.

M & L TMT bars 10 mmm dia and over dia cut to length bent to shape required including cranking, bending and binding with and including ms wire (annealed) n. less than 0.9mm dia or securing with clips complete all as specified

Ditto all as per item No above but 6mm to 8mm dia

All as per ser item above but 5mm dia and over as in stirrups, spacers and binders

M&L for rendering 15 mm thick in CM 1:6 on brick or concrete wall surfaces and surface finished even & smooth w/o using extra cement complete all as specified and directed by Engr-in-Charge.

M&L for rendering 15 mm thick in CM 1:4 on brick or concrete wall surfaces and surface finished even & smooth w/o using extra cement complete all as specified and directed by Engr-in-Charge.

M & L for 5 mm thick plaster in cement mortar 1:3 finished even and smooth without using extra cement to ceiling/chajja’s complete all as specified.

M&L for rendering 10 mm thick in CM 1:4 with using water proofing compound on concrete slab and surface finished even & smooth without using extra cement complete.

Supply only Integral waterproofing compound

M&L for Applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sqm over a coat of primer including cleaning surfaces complete all as specified and as directed by engineer-in-charge.

APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non woven fabric (wt. not less than 150 gms/sqm) laid on primed surface by torch application with two coats of bitumen based aluminium paint complete all as specified (Bldg ht upto 10 m)

M&L for preparation of new plastered surfaces of any description not otherwise described and applying two coats of cement base paint on walls including prepration of the new surface etc complete all as specified.

M&L for preparation of new plastered surfaces of any description not otherwise described and applying three coats of white wash on ceiling complete all as specified and directed.

M&L preparing surfaces of new walls and applying two coats of oil bound distemper over a coat of primer complete all as specified

S&F anodised aluminium frame powder coated with minimum thickness of powder coating 50 micron for doors, windows, ventilators with one or more rebates including joining cleat for fixing, hinges etc. complete all as specified. complete all as specified and directed. Note:- Prelaminated partical board and sheet glass/wiremesh shall be measured and paid for separately. Make:- INDAL/HINDALCO/JINDAL or equivalent as per IS.

S&F anodised aluminium door shutters, powder coated aluminium section weighing 0.55 Kg/m ncluding necessary joining cleats,glazing clips, ruber neoprene packing, handles 2 Nos in each door, 2 Nos tower bolt of size 200 mm, hinges, anodised aluminum snap beading screws etc including 6mm thick bakelite sheet fixed to aluminium shutter as in doors complete all as specified and as directed

S&F in repairs vitreous china urinal bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (including flush pipe and waste pipe) complete all as specified and directed.

S&F anodised aluminium ventilator shutters, powder coated fixed type without sash bar,aluminium section weighing 0.55 Kg/m ncluding necessary joining cleats,glazing clips, ruber rubber packing,handles 2 Nos per shutter,2 Nos tower bolts of 150 mm size per shuttter anodisd aluminium snap beading, screws etc with chowkhat complete all as specified.

S&F vitreous china water closet Padestal pattern( white ) includng trap but excluding fixing bolts, flushing cistern and flush pipe complete all as directed.

S&F PVC flushing cistern, 10 ltr capacity, valve less symphonic action type, low level, with intel, ball valve, float valve abd handle including brackets fixed in position, 32 mm dia PVC flush pipe and connection to water mains complete all as specified and directed by engineer-in-charge.

S&F 15 mm dia GI tubing , medium grade, and connections fixed to wall or ceiling, laid in floor etc complete all as specified and as directed by engineer-in-charge.

S&F 20 mmdia GI tubing and connections fixed to wall or ceiling, laid in floor etc complete all as specified and as directed by engineer-in-charge.

S&F Pvc connection 15mm size with PTMT nuts of length 600mm complete all as specified and as directed by Engineer-in-charge.

S&F 20mm size stop valves PTMT high pressure screwed for iron pipe (make- Prayag) complete all as specified and as directed by engineer-in-charge.

S&F Rotational moulded polythene water storage tanks double layer (cylinder each vertical with closed top) of capacity 500 Itrs, hoisted and fixed in position including pvc float valve 20mm size,specified in SSR Pt-1 complete all as specified and as directed

S&F PVC SWR pipe 110 mm dia laid in treanches , single socketed in any length with rubber ring joints fixed to walls etc all as specified

S&F PVC SWR pipe 75 mm dia laid in treanches , single socketed in any length with rubber ring joints fixed to walls etc all as specified

S&F 100 dia PTMT grating doom (min wt 25 gms) complete all as specified

M&L for Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match , incl over 15 mm thick screed or bedding layer in CM 1:6

M&L for glazed ceramic tiles colouredof size 450mmx350mm x 7mm th on vertical surfaces such as in skirting, dado etc over 10 mm th backing coat in cm 1:4

M&L for 75mm th PCC 1:3:6 type C2 as in plinth protection with using 40mm graded stone aggregate etc all as specified.

M&L Hardcore (borken bricks) of gauge n exc. 63 mm, deposited, spread and levelled in layers not exc. 15 cm thick, watered and rammed to a true surface complete all as specified.

S&F 15 mm bore Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed etc complete all as specified and as directed by engineer-in-charge.

S&F 15 mm bore stop valve cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for union fancy type chromium plated concealed complete all as specified and as directed by engineer-in-charge.

S&F 15 mm bore dia bib tap (long or short body) cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for union fancy type chromium plated concealed complete all as specified and as directed by engineer-in-charge.

S&F 75mm size PVC (SWR) floor trap plain with grating incl to jointing with waste pipe with adhessive etc all as specified

Supply and fix for vitreous china ware wash hand basin with pedestal type (color as specified and directed), flat back size 550 X 400mm including 15mm dia pillar tap swan neck) chromium plated, CP waste coupling, waste fittings, union and waste pipe 32mm dia or required length and all necessary inlet, out let connections complete all as specified and directed.

S&F stainless steel wire cloth 0.56mm dia of wire and average width of aperture 1.18mm fixed with stainless steel wire staple complete all as specified and as directed by engineer-in-charge.

S&F towel rail 600mm long of PTMT incl cp brass srews and wooden/plastic cleats (Minimum weight 190 gms) complete all as specified

S&F in Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position completein all respect as specified

S & F Brass chromium plated shower rose 125mm size including fixing to pipe or union with shower arm complete all as specified and directed.

S&F plastic seat cover white closed pattern with flat bottom and MS chromium plated or aluminum hinges device for EWC complete all as specified.

S & F Sheet glass shelf aluminium alloy brackets and guard railassembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified.

M & L 150mm dia (internal) SGSW pipes grade ‘A’ laid in trenches and jointed all as specified and directed by Engineer - in - Charge.

Cement concrete 1:3:6 type C-2 using 40mm graded crushed stone aggregate as in bed to drain pipe including packing under and haunching against the sides of pipes 150mm dia (internal) after these are laid in trenches all as specified and directed by Engineer - in - Charge.

Providing precast cement concrete type B1 1:2:4 (using 20mm graded agregate) set in C:M 1:6 in landings , cover slabs & chajjas, water troughs, shelves and similar articls with plain faces complete all as specified and directed by Engg in Charge.

Septic Tank for 10 users Excavation in ordinary soil, foundation in PCC 1:2:4 brick work in CM 1:4 RCC slab covers incl. RCC Precast manhole cover having 6 mm plate embeded all around/ fiber reinficed cover with angle iron frame vent shaft & sludge chember etc complete.

Sokage well exc in ordinary soil, foundation in PCC 1:3:6 wells of honny combed masonry with top ring of M-25 concrete, incl. intercepting chamber and screen chamber made of bricks masonary in CM , RCC cover slab in M-25/SFRC cover interconnection pipes of RCC/DWC complete filled with brick bats, complete of size 1.8 m x 3.0 m effective depth complete all as specified.

M&L PCC 1:4:8 type D-2 using 40 mm graded stone agg as in mass filling and sub base.

Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening conforming to GdeFe 290(Gde E-165)

S&F 40 mm thick flush shutter solid core construction with block board core and decorative face panels veneer with lipping/frame to match on both faces complete all as specified and as directed

S&F 300mm size aluminium alloy, anodised, sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet,cast or extruded sections and fixing bolts sliding bolts of extruded section incl a minimum of six nut and bolts ,four on bolt plate and two on stapple plate complete all as specified

S&F floor door stopper aluminium alloy body and tounge 140mm anodised with hard drawn steel spring etc complete all as specified and as directed by engineer-in-charge.

S&F 125 mm size extruded aluminium alloy pressed handle stove enamelled black and fixed complete all as specified and as directed by engineer-in-charge.

S&F 100 mm size mild steel butt hinges medium weight cold rolled complete all as specified and as directed by engineer-in-charge.

M&L for two coats synthetic enamel paint new wooden surface over 10 cm width or girth over a coat pink primer incl preparation of surfaces.

Material and labour for concealed point wiring with stranded copper conductor Cable PVC insulated unsheathed 1.5 Sqmm FRLS cable in and including in PVC conduit of suitable size In stone wall with PVC boards of appropriate sizes and all requisite accessories such as PVC elbow,Tee,collers bend, PVC conduit for crossing etc. complete with PVC terminals box for mounting switches, sockets, fan regulators etc with one single core sheathed cable continuous 1.5 Sqmm,FRLS copper cable for earth wire complete all as specified and as directed for :- (a) One light point controlled by one switch with cable 1.5 Sqmm Size

(b) One Celing fan /Exhaust Fan point controlled by one switch with cable 1.5sqmm size

(c) One 5 pin socket outlet 5 Amps on the same board

All as per item No- 1 above but One 15/16 A socket outlet independent with 2.5 sq mm PVC cable and 2.5 sqmm cable as earth continuity wire.

Supply & Fixing Modular Switch 1 way 6A, 1 module.

Supply & Fixing Modular Switch 1 way 16A,1 module

Supply and fixing Socket, 6A-2/3 pin combined 2 module.

Supply and fixing Socket 6A/16A-2/3 pin combined 2 module.

Supply and fix ceiling rose of size 65 X 25 mm surface Bakelite three terminals complete all as specified and as directed.

Supply and fix modular white cover plate with frame - 6 module

Supply and fix modular white cover plate with frame - 4 module

Supply and fix modular metal flush box for 6 module

Supply and fix modular metal flush box for 4 module

S&F LED tube light 20 Watt fitting white powder coated slim box type batten made of formed CRCA sheet with snap on installer sutable for single side connection LED tube in and including batten and tube etc complete in all respect.

S&F MCBs Single Pole of 240 volts 6-32 Amps,10KA Capacity, 'C' Series in in MCB DB complete with connection testing and commissioning

Supply and fixing of Exhaust fan made of sturdy Engineering plastic complete with lovers shutter,voltage 230 V 50 HZ 1200 RPM Copper winding of sweep 250 mm

Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker(MCB) of SPN 40 to 63 Amp current carrying capacity in the DB complete with connection testing and commisioning.

Material and Labour in for submain wiring with two runs of single 6 sqmm PVC insulated unsheathed multistranded 1100 vols grade with copper conductor drawn through and including in pvc conduit medium grade ISI marked and its accessories including one run of single core 6 sqmm PVC insulated unsheated multistranded 1100 volts grade with copper conductor cable as earth contuinity conductor along with the wiring and connected from DB to DB/ main board complete all as specified and as correct.

Earthing complete with galvanised steel earth plate electrode 60x60cm x 6 mm thick, buried directly in ground (earth pit not less than 2.25 meters deep below ground level) with top edge of the plate not less than 1.5 meters below normal ground level, connected to galvanised earth lead wire 4.0 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate no. 3 connected to earthing test point all as specified or indicated including testing on complection., earth plate surrounded by packed layers of charcoal dust and common salt 15cm thick, all around including top and bottom and watering pipe 20mm bore of GI pipe light grade with funnel and wire mesh, PCC chamber of size 300x300x300mm (top of chamber minimum 15 cm above the normal ground level (1:3:6) using 20mm graded stone aggregate and RCC cover (1:2:4) type B-I using 20mm graded crushed stone aggregate with 1 nos MS handles of 8mm dia including necessary excavation/ earth work in any type of soil/rock and as shown in Electrical plate No. 3 of SSR Part-I (2020) testing on completion complete all as specified.

S & F single door sheet metal enclosures factory made DBs 8 way SPN ,240 volts,protection class IP-43, SUITABLE FOR FIXING OF MCBs,Isolators etc,confirming as per IEC 61439-3,Suitable for flush Mounting and surface mounting, With Neutral bar,Earthbar and cable ties for cable management,fully shrouded Neutral bars,prefitted masking sheet complete all as specified and as directed

Supply and fixing LED light fitting mirror type high output diffuser 2 feet, 10 watt 220V AC decorative type with driver holder and LED lamp including connection up with three core flexible copper conductor cable of suitable size complete.

Supply and fixing, in any length, Galvanised water tubing, medium grade, nominal dia 20 mm, with all fittings, testing complete all as specified and as directed

Supply and fixing gun metal stop cock, valves,20 mm bore of pipe,with iron wheel head,screwed both ends for iron pipe and fixed complete all as specified and as directed