8124/SAR-T-08/2024-25 REPAIR /MAINT OF TILING AND E/M WORK SERVICES IN SWIMMING POOL AT PTS (VIKAS) SARSAWA UNDER GE (AF) SARSAWA

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises

Providing & fixing Glass mosaic tiles on finished plain floor/wall surface of size 20 mm x 20 mm x 4 mm in all colour, design, fixing in customize design/pattern as per directions of Engr-in-charge. The glass mosaic tiles to be fixed on the floor/wall surface with the help of approved adhesive applied at the rate of 2.5 Kg per sqm and grouting of the same complete all as specified & directed by Engr-in-charge. Make: Johnson/Kajaria/Somany.

M&L for cleaning of swimming pool complete all as specified & directed for the following steps :- (a) Bailing out the dirty/ Muddy water settled at the bottom of swimming pool of size 50 mtr x25 mtr & depth 3.10 mtr ( Average depth) by using small submersible pump set/or Mannual Appx Qty of Muddy water 60,000 litre (b) Taking/ lifting out Alge/ Mudd deposited at the bottom of swimming pool by mannual labours & removing outside the swimming pool upto 50 mtr distance.(Appx qty- 01 Cum) (c) Cleaning the Swimming pool theroughly with water( water will bge supplied by Department) & cleaning the bottom, side walls/tiles of pool by using nylon bruses and detergents & non reactive chemicals theroughly including removing dirt/soopy water from the pool/ (Note: Tiles shall be cleaned/ brushed with water and detergents till the dirt and patches on the tiles are removed to the entire satisfaction of Engr-in-Charge. (d) All as per Serial Item No 3(c) above but balancing tank(UG Sump) of swimming pool size having water capacity 50 cum Appx quantity of muddy water 10000 ltrs. (e) Taking/ lifting out Alge/ Mudd deposited at the bottom of balancing tank by mannual labours & removing outside the swimming pool upto 50 mtr distance. (Appx qty- 0.5 Cum)

Daily Cleaning of swimming pool bottom and side walls by using suction sweeper fitted with nylon brush all as specified and directed. Note: (a) Suction sweeper including brush will be used which is at swimming pool installation. (b) This job shall be done on daily basis upto the satisfaction of Engr-in-charge. (c) Electricity for suction sweeper will be provided free of cost by department. (d) Repair to suction sweeper including replacement of bolts, nuts, washers and servicing of suction sweeper pump etc., as and when required shall be provided by the contractor without any extra cost to the department. (e) The rate quoted shall be deemed to include the charges for divers for cleaning the side walls of swimming pool for every cleaning.

M&L for Nylon Brush for Suction Sweeper set complete fitted in Aluminium strips of metalicnead for Suction Sweeper complete all as specified and directed.

Supply only Algae Brush SS Bristles complete all as specified and directed.

Supply only Reinforced telescopic Handle not less than 8.0 mtr long complete all as specified and directed.

Supply only Deep Bag skimmer clip including net including 8 mtr rod complete all as specified and directed.

Supply and replacement of Nylon rope 20mm dia complete all as directed.

Supply only Water test Kit (CL & PH) complete all as specified and directed.

Supply & replacement of Nylon hose pipe 50mm bore, heavy duty complete with clamping of required size, nuts bolts and washers etc complete all as specified and directed.

M&L for Cleaning of Swimming Pool floor/walls by scrubbing the bottom of walls with a 5% Solution of copper sulphate/Diluted HCL Rinsing after about 15 minutes complete all as directed.

Dewatering of sump near swimming pool filter plant of internal dia 5 mtr and 7 mtr depth approx and cleaning by using with a 5% Solution of copper sulphate/Diluted HCL Rinsing after about 15 minutes complete first and then with plain water complete all as specified and diected.

Painting to existing MS pipe, machinery sluice valves, valve pit cover at Swimming Pool (except repaired under respective item of this schedule), jumping/dividing boards handles upper side of waste water with one coat of synthetic enamell paint including preparation of surface complete all as directed and specified.

Supply and mixing filter alum (crystaline and clear) into Swimming Pool water for ensuring coagulation and trapping of suspended matter and colour in water in controlled manner to maintain PH value in the range of 7.2 to 7.6 approx. complete all as directed

Supply and addition of copper sulphate to Swimming Pool water for controlling and accummulation of organic/inorganic material complete all as directed

Supply and addition of Soda Ash in Swimming Pool as per site requirement for controlling the accumulation of slimis, complete all as specified and directed.

S&F in replacement of ISI marked 3 way reflex multiport valve as per matching to existing type & shape with inlet & outlet connections of dia 50mm dia PVC pipes, for sand media filter tank with in built pressure gauge complete with fixing in existing media filter tank complete with all fixing accessories all as specified and as directed by Engineer-in-charge.

S&F in replacement of butterfly valve PN-10 of follwing sizes fixed in PVC heavy duty pipe complete with flanged end connections with new GI nuts/bolts etc complete all as specified and as directed by Engineer-in-charge Pipe of 50mm bore

All as per item No. 19 above but Pipe of 100mm bore

All as per item No. 19 above but Pipe of 150mm bore

All as per item No. 19 above but Pipe of 200mm bore

M&L for providing trolly mounted suction sweeper of capacity upto 3 HP for the entire duration of contract complete all as specified and directed by Engineer-in-Charge.

Supply & fix of (DOL) starter 1 phase, 230 volts suitable for suction sweeper of capacity 3 HP including fitting testing & commissioning all as directed. Make- Havells/C&S/L&T.

Supply & fix as in repair single phase preventor suitable for pump set 3 phase 415 volts including testing & commissioning all as directed.

S&F in replacement of Contactor suitable for motor upto 15 HP 3 phase 415 volts including testing & commissioning all as directed.

S&F in replacement of Over load relay suitable for motor upto 15 HP 3 phase 415 volts including testing & commissioning all as directed. Make- L&T/C&S/Havells

M&L and T&P for rewinding of swimming pool motor 15 Hp complete all as specified and as directed by Engineer-in-Charge.

M&L and T&P for repair of swimming pool pump 15 Hp including seals, bush, bearings impellers etc complete all as specified and as directed by Engineer-in-Charge.

S&F in replacement of timer for star and delta suitable for 15 hp pump starter panel complete all as specified and directed.

S& F in replacement of contactor coil of any capacity complete all as specified and directed.

M&L for spray painting/Preparation of starter panel with synthetic enamel paint of directed colour tint complete all as specified and directed.

Supply only High Strength Calcium based granular disinfectant for water treatment, in factory sealed non returnable HDPE containers (40 to 50 Kg each) having chlorine concentration level 65% or above complete all as specified and directed Make - Aquafit or equivqlent as approved make by E-in-C's branch . Note- the contractor must submit the Certificate of compliance in origional from manufactures by all india authorised MES distributor for each batch of product delivery indicating including chemical report by all india distributer.

Supply only swimming pool safety lane divider of suitable size and type as directed by dept as per user requirement complete all as specified and directed.

S&F of single phase 230 volt pressure pump of capacity 0.5 Hp connecting in main supply line to toilet at any location complete all as specified and directed. Make - crompton/CRI/Kirloskar

M&L for cutting of main fresh water supply line of any type any size complete all as specified and directed

Sunil Enterprises

Sharma Electrical and Engineering Works