S/R to K-M-T road such as berm cleaning, Culvert, Bridge parapet wall painting and fixing of drain cover slab and repair of potholes from 30/00 Km to 67/300 Km during 2025-26

Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth upto 300mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned upto a lead of 1000metres including removal and disposal of top organic soil not exceeding 150mm in thickness as per Clause 201 of MoRT&H Specifications for Road & Bridge works (5th Revision)and as per direction of EIC

Construction of embankment with approved materials obtained from borrow pits for side of drain by hydraulic excavator with all leads and lifts and transporting to site by mechanical means with a lead of 5 km spreading ,grading to required slope by means of Dozer as per requirement ,watering ,compacting by PRR etc as per Table 300-2 & 305 of MORT&H including cost & conveyance , royalties of earth with all labour with T&P required for the work etc. complete as per drawing and Technical specification and as directed by the Engineer-in-Charge.

Tree painting with Water proofing cement paint two coats with approved slab materials on the prepared surface with cost conveyance of all the materials and all labour with T&P required for the work etc. (Including cost of coloring materials) complete in all respect in all floors as per drawing and Technical Specification and as directed by the Engineer-in- Charge

Painting Two coats with any approved Sinthatic Enamel paints of approved colour, shade over a coat of primer on any elevtion on road kerb,parapat & guard post ncluding cost of Paint conveyance,,Royalty, EMF,DMF and aditinal charges of materials, cost of labour, machinery T&P,Cess etc complete as per standard specification and Section-803. of MoRT&H specification for Road & Bridge direction of Engineer-in-charge..

RCC M-25 grade in drain cover slab using 20 mm to 10 mm size crushed stone aggregates mixed by concrete mixer laying in layers and compacting by vibrator and all leads and lifts as per approved Drawing and Techinical specifications and as per section 1700 & 2100 of MORATh specifications for road and Bridges works ( 5th Revision) including cost, conveyance, royalty and EMF,DMF and aditinal charges of all materials and labour with T&P,Cess required for the work etc. complete as per drawing and Tecnical Specification and as directed by the Engineer-in- Charge.

Steel reinforcement works in structure & CD work using HYSD (uncoated reinforcement bars of FE-500) steel of approved manufacturer as per section 1600 &section 1900 of MORT&H specification for Road and Bridge works ( 4th revision) including cost, conveyance of all materials, binding wires 18 to 20 gauge and labour with T&P required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge. (weight of reinforcement sall be calculated on the basis of IS 1732. wastage, overlaps, couplings, welded joints, space bars, chairs, stays, hangers and annealed steel wires or other method of binding & placing shall not be considered for payment)

Providing Tack coat on prepared bituminous surface with bitumen emulsion (RS) and spreading @ 0.20 kg per sqm using mechanical means as per Technical specifications and as per Clause-501 & 503 of MORTH specifications for road & Bridge works (5th Revision ) including cost, conveyance of materials, cost of labour, machinery T&P Cess etc complete. as per standard specification and direction of Engineer-in-charge.

Providing and laying Semi Dence Bituminous Concrite thick S.D.B.C. of grading -2 using crushed stone Gr-2 materials and 60/70 penetration grade of bitumen preparing preemixed materials with bituminous binder with hot mix plant, transported to site, laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled to achieve the desired compaction as per clauses 501 & 504 of MORTH specifications for road & Bridge works (5th Revision ) including cost, conveyance Royalty, EMF,DMF and aditinal charges of materials, cost of labour, machinery T&P,Cess etc complete as per standard specification and direction of Engineer-in-charge.

Please Enable Macros to View BoQ information