Construction of Public Distribution Shop (Type II) at Panankattupalayam H/o Vinnapalli - MPLADS - 2025-2026

Amount

Earth work excavation and depositing on bank with initial lead and lift in hard gravelly soil, hard stiff clay, black cotton soil, hard red earth,shales, murram, and earth muds with 50% fair sized boulders as per SS 20B for narrow foundation complete as per standard specification.

Cement concrete in 1:4:8 mix using 40mm ISS HBG metal including all Cost and conveyance of labour charges etc.,Complete.,

Collection and supply of gritty gravel from appd quarry including cost and conveyance of all materials to site including all labour charges for filling etc.complete,

Brick work in CM 1:5 mix using country bricks size of 9'' X 43/8'' x 23/4" including all cost and conveyance of labour charges etc.,Complte. - For Foundation and Basement

For Super Structure in Ground Floor

Supplying and errecting for sides & soffits including supports and strutting upto 3.29m height for plane surface in all floors including cost and conveyance and all labour charges etc., complete as per standard specification. - BGL

Roof slab ,lintel & beam, Sunshade

Column

Supplying and Fabricating and placing in position MS steel or ribbed for steel for all reinforced cement concrete works as per the design given including cost of steel and binding wire in all floors etc, Complete complying with stanard specification.

R C C 1:11/2:3 mix usinig 20mm ISS HBG metal including all cost and conveyance of labour charges etc., Complete A.Foundation and Basement

R C C 1:11/2:3 mix usinig 20mm ISS HBG metal including all cost and conveyance of labour charges etc., Complete B.Superstructure in Ground Floor

Supplying and applying of two coats of putty of 3mm thick over the exposed RCC surface of ceiling including finishing the joints smoothy with grinding machine and the surface shall be thoroughly cleaned out of dust and scrubbing. The Surface shall then be allowed to dry for atleast 48 hours. It shall then be sand papered (waterproof abrasive sheet) to give a smooth and even surface. Any unevenness shall be made good by applying 1st coat of putty mixed with water on the entire surface including filling up the undulations and applying 2nd coat of putty after 6 hours of 1st coat of putty and then sand papering (waterproof abrasive sheet) the same after it is dry and finishing the surface smoothly, etc., complete complying with standard specifications and as directed by the Departmental Officers. [ The rates are inclusive of hire charges for grinding machine with wheel, cost of sand paper (waterproof abrasive sheet), cost of putty blade, labour charges for grinding the joints and sand papering, two coat of putty, scrapping the putty area to level the surface smooth, etc., complete]. The Putty shoule be got approved by the Executive Engineer before use on work.

Plastering with CM 1:3 mix using 10 mm thick including all cost and conveyance of labour charges etc.,

Plastering with CM 1:5 mix 12mm thick including all cost and conveyance of labour charges etc., complete.

Granolithic flooring with CC 1;2:4 mix using 10mm -12mm ISS chips HBG metal including all cost and conveyance of labour charges etc.,

Supply of Steel Vetilator of size 0.90 x 0.60m including in all other charges at site in all etc

Manufacturing supplying and fixing of steel door with the following specification MS angels of size 40x40x6mm are used for the outer frames and M.S. angles of size 35x35x5mm for the shutter frames stiffeners with 32 x 6mm M.S flat is provided at required intervals in the shutter frame. 18-gauge C.R. sheet laid as panel in the shutter and welded intact. M.S. flat 18x5mm is welded over the 32 x 6mm M.S. flat M.Sandwitching the C.R. sheet in between additional stiffeners with 18x5mm M.S. flat is provided diagonally at the rear side of the shutter, 3nos. of hinges in case of single leaf and 6nos. of hinges in double leaves shutter to be provided 6nos. of holdfasts 120 mm in length made of angle section spliced at the ends are welded to the outer frames of the door. Tower bolts 2nos. one at the top and the other at the bottom are provided 1no. Aldrop is provided incase of double leaf door at lock rail section in the door in single leaf door, one more aldrop is provided in the inner lock rail section of the door One rotaing locking arrangements for the inner side of the door and additional provision for locking arrangements for lock is provided on the rear side of the door at an appropriate place. Incase of double leaf door M.S.Flat 32 x 3mm at 1.1Kg/m is provided on the one shutter t conceal the gap between the two shutters.at an appropriate place in the door. A tie bar is provided at the bottom of the frame to prevent twisting of frame during transportation and fixing. All members are given a coat of red oxide primer as directed by the departmental officers. The rate includes cost of all materials, labour charges, transportation to site of work, loading, un loading and all other incidental charges etc., complete. Steel Door

Manufacturing, supplying and fixing in position of steel windows with the following specifications. Outer frames of windows made of "Z" section F7D of size 33 x 25 x 3mm at 1.419kg/m and mullion "J" section (F4B) of size 46 x 25 x 3mm at 2.28kg/m and shutter section of made of F7D of 33 x 25 x 3mm at 1.419kg/m as specified in IS 7452/1990. ach openable shutter should not exceed a width of 600mm to enable separate operations and easy maintanenance. The panel of the shutters to be covered with 18 gauge cold rolled sheet of superior quality and welded intact with shutter frames. Horizontal stiffeners using 18 x 5mm MS flat at 0,70kg/m at 3Nos. for each shutter and additional diagonal stiffeners of the same MS flats at all the four corners of each shutters to the suitable length welded to the shutters, for holding the CR sheets in position firmly. 2 numbers of sturdy hinges and one number of handle-cum-latch of special type made with 18 x 5 mm MS flats are revetted to the shutters at an appropriate height in window. Suitable opening is left for its easy operation. A stopper square rod for handle is provided in the mullion section at suitable le place to catch the window handle. Each window shutter having an adjustable stay made out of 18 x 5mm at 0.70kg/m MS flat of length 320mm with three adjustable position. A matching peg is provided in the outer frame of the window at suitable place. 4Nos. of hold fasts of 120mm length spliced at the ends are welded to the outer frame of the window by using MS flat of 18 x 5mm at 0.70kg/m welded to the shutter at two place equivalent from each other from top and bottom of the shutter. An MS square bar of 12mm size is welded to the inner face of the window at an equal internal not exceeding 100mm edge to edge between them. All members are painted with one coat of anti-corrosive red oxide primer as directed by the departmental officers. All sections should be in confirmed with IS 7452/1990. The cost includes cost of all materials, labour charges and other incidental charges, etc.,complete. Steel Window

Supplying and fixing in positon Indian Water Closet (Oriya type) of size 580 x 440mm white glazed earthern ware of approved quality and brand with "P" or "S" trap conforming to BIS with crushed stone M.Sandcushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 (One lime, Two crushed stone M.Sandand Five brick jelly) 100mm thick and finishing the top to the required slope and including giving necessary connection to CI soil pipes (including the cost of 100mm dia CI pipe for a length of 600mm) by dismantling brick masonry wall / reinforced cement concrete roof / floor slab and making good the dismantled portion to the original condition with leakages etc., complete complying with standard specifications and as directed by the departmental officers.

Flooring with following ceramic tiles of size 305 x 305 x 6 mm laid over 20 mm thick cement mortar 1:3 (One Cement and Three M.Sand) base mortar over the existing slab / floor including cutting the tiles to the required size with special cutter wherever necessary, laying in position and pointing with white cement mixed with colouring pigment at the rate of 0.3 Kg. / sq.m. etc., complete complying with standard specification.

Dadooing walls with best approved quality, white / colour glazed tiles of size of 300x200x6mm set in Cement Mortar 1:2 (One Cement and Two crushed stone M.Sand) 10mm thick and pointing the joints with white cement mixed with colouring pigments at the rate of 0.40 Kg. / sq.m. neatly in all floors, curing, etc., complying with standard specification

Finishing the top of roof with one course of machine pressed tiles of size 230mm x 230mm x 20mm of approved quality set in Cement Mortar 1:3 (One Cement and Three Crushed stone M.Sand) 12mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete complying with standard specification

Distempering two coats using best quality and approved colour oil bound distemper over one coat of cemet paint including all cost of labour charge etc.,

Exterior Emulsion Two coats over priming coat including cost and conveyance of all materials and labour charges etc complete.

Painting two coats over new iron works using ready mixed enamel paint including cost and conveyance of paint and all labour charges etc complete

Supplying and fixing following thickness of cuddapah slab for cupboard 25mm Thick Cuddapha slab etc complete

Supply of PVC Sanitary Lines etc complete 110mm Dia Pvc Pipe 6Kg/cm2

Wiring with 2x1.5sqmm(22/0.30) pvcinsulated SC unsheathed Copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories in flush with wall with 3mm thick hylem sheet cover with TW switch box and 5A F.T switch with continious earth wire connection of 14SWG wire for making good of the Concelled portion with suitable colourfor PVC CONCEALED LIGHT / FAN POINT( for Electronic Regulator) (SD No.24)

Supplying and fixing of single box type 4'-40W flourescent tube fitting with copper choke and condunser with TW round block on wall or ceiling with flourescent tube with PVC unsheathed copper leads from terminals to fitting of tube light. (SD No. 89)

Supplying and fixing of 1200mm (48") sweep AC ceiling Fan complete with stepped eloctronic 300W regulator with 1m down rod with fan clamp with side plates and cross arm of size 450mm (18") (SD No.107)

Wiring with 2x1.5(22/0.30)sqmm pvc unsheathed SC Copper conductor of 1100Vgrade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with 150x100x113mm TW switch box for 5A-3pin non inetrlocking CS plug including pin top with painting of suitable colour with continous earth wire connection of 14SWGTC wire for Concelled PVC plug point.( SD No.38 )

Wiring with 2x4(56/0.30)sqmm PVC unsheathed SC Copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with 150x100x63mm TW switch box for 15A-3pin non inetrlocking CS plug including pin top with painting of suitable colour with continous earth wire connection of 14SWG TC wire for Concelled PVC power plug point.( SD No.40 )

Supply and run of 2of 4 sqmm (56/0.3) polythene insulator PVC sheathed heavy duty SC. Copper conductor of1100 V grade on 7/20 GI bearer wire for service connection main(SD.No.65)

Supply and run of 2of 4sqmm(56/0.3) polythene insulator PVC sheathed heavy duty SC Copper conductor of1100 V grade in 25mm dia GI Pipe (class B) suitably bent on both ends with necessary angle iron upright and end supports for mains. (SD.No.70)

Supplying and fixing of 5Amps/10Amps/20Amps AC single phase 230V50Hz watt hour meter on suitable TW box complete with earth connection excluding the cost of meter (SD.No.124)

Supply and fixing of 16A DP switch of 500V with matal clad with fuse and neutral (side handle) on suitable TW board with earth connection only(SD.No.142)

Supply and delivery and fixing of HDPE tank as per IS 12701 / 1996 including loading, unloading, transportation and labour charges for fixing of the GI pipes and specials for pipe connection works including cutting, threading and fixing charges etc., 500lit

Supplying and Erecting Pull and Push Type Rolling Shutter with ISI make of approved size and section using 18 GI sheet. The shutter shall be painted with one coat of red oxide primer and the rate is inclusive of hood covers, transportation charges etc SOR M-0401 - Manually Operated (up to 8 sqm. Area)

Provision for Name Board

GST Amount for providing Service to Government Contract Works for the above Construction & Maintenance Works. { GST Amount is the Total GST Amount for overall quoted amount (Both Construction and Maintenance) above this row in column "BB" for all works in this package} (Refer Clause 13.2 & 13.3 of Section 2 of Instruction to Bidders (ITB) of SBD)

V PRATHI CONSTRUCTION (BID ID -1513223)