WELCOME MAINT OF OMQs AREA AND PAINTING IN CAMOUFLAGE PATTERN TO CERTAIN BLGS IN TECHNICAL AND OPS AREA AND PERIMETER WALL AT AFS STN BARNALA UNDER GE (AF) HALWARA

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing servicable tiles to store and rubbish off the premises, complete all as specified and directed.

Material and labour for vitrified ceramic tiles of size 8-10 mm thick dark shade, area of each tile not exceeding 0.36 sqm, in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in cement mortar 1:6, complete all as specified and directed.

Material and labour for vitrified ceramic tiles of size 8-10 mm thick dark shade, area of each tile not exceeding 0.36 sqm, in vertical surfaces etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match as in skirting over 10mm thick rendering in cement mortar 1:4, complete all as specified and directed

Material and labour for joint less Non- skid ceramic colured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm (square/rectangular) in floor etc set joints in neat cement slurry and pointed in white or coloured cement to match the floor including 15mm thick screed bed in cement mortar 1:6, complete all as specified and directed.

Material and labour for Glazed ceramic coloured tiles in vertical surface 300x200x7mm/300x450x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the surface including 10mm thick rendering in cement mortar 1:4, complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floor apron etc, laid, bedded and pointed in any mortar and including removal of debrish & rubbish from the site, complete all as specified and directed.

Material and labour for black granite 20mm thick (of any type ) work (table rubbed and polished) in cooking plateform and like in cement mortar 1:4 including pointing in white cement (1:2) using marble dust making holes in RCC shelves suitable for gas pipe, complete all as specified and directed.

Material and labour for providing edge moulding to 18-20mm thick stone of counters vanities etc including machine polishing to edge to give high gloss finish etc, complete all as specified and directed.

Material and labour for preparation of old decorated plastered & unplastered surfaces of walls by brooming down or steel wire brushing, scrapping down smaoke soot, mould, moss and efflorescent salts trading oil and greasy spots; filling holes, crakes with wall care putty and applying one coat of white wash, complete all as specified and directed.

All as per item No. 9 here in above but on ceiling.

All as per item No. 9 here in above but one coat of distemper oil emulsion.

M&L for complete removal of existing treatment on wall with wire brushing scrapping down smoke soot, mould, moss and efflorescent salts trading oil and greasy spots filling holes, cracks with care putty and applying two coats of distemper oil emulsion over a coat of primer and a layer of wall care putty, complete all as specified and directed.

Material and labour for preparation of old painted wood and wood based surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed.

Material and labour for preparation of old painted steel and iron based surfaces of any description over 10cm width of girth and applying one coat of synthetic enamel paint, complete all as specified and directed.

Material and labour for preparation of old decorated plastered & unplastered surfaces of walls by brooming down or steel wire brushing, scrapping down smaoke soot, mould, moss and efflorescent salts trading oil and greasy spots; filling holes, crakes with wall care putty and applying one coat of cement base paint complete all as specified and directed.

Taking down cement plaster on brick walls etc including racking out joints, hacking for key scrubbing down with water etc complete all as specified and as directed.

Demolition of brick work built in cement mortar including all quoins, arches, pillers etc, complete all as specified and directed.

Material and labour for brick work with sub class ‘B’ Bricks straight or curved on plan exc 6M mean radius and built in cement mortar 1:6, complete all as specified and directed.

Material and labour for brickwork with sub class 'B' Bricks, Straight or curved on plan to any radius in half brick thick wall built in Cement Mortar 1:4, complete all as specified and directed.

Material and labour for 12mm thick cement plastering in cement mortar (1:6) on other than fair faces of brick work or concrete surfaces finished even & smooth without using extra cement, complete all as specified and directed.

Material and labour for 15mm thick rendering in cement mortar (1:4) on fair faces of brick work or concrete surfaces of external wall with WPC finished even & smooth without using extra cement, complete all as specified and directed. Note :- WPC shall be measured and paid seperately as 'Supply only'.

Material and labour for 5mm thick cement plastering in cement mortar (1:3) as on ceiling surfaces finished even and smooth without using extra cement, complete all as specified and directed.

Material and labour for preparation of new plastered surfaces and applying three coat of white wash on ceiling surfaces, complete all as specified and directed.

Material and labour for preparation of new plastered surfaces and applying three coat of white wash on Wall surfaces, complete all as specified and directed.

Material and labour for applying two coat of distemper oil emulsion over a coat of primer and one coat of wall care putty incl preparation of new plaster surface, complete all as specified and directed.

Material and labour for preparation of new plastered surfaces and applying two coats of cement base paint over a coat of primer, complete all as specified and directed.

Demolition of cement concrete (un-reinforced) in floors and paving n.exc 15cm thickness (below or above ground level), complete all as specified and directed.

Material and labour for 75 mm thick PCC 1:3:6 type C-2 as in plinth protection / floor sub base etc.complete all as secified and directed.

Material and labour for 40mm thick PCC (1:2:4) type B-1, (using 20mm graded stone aggregates) finish even and smooth with using extra cement, complete all as specified and directed.

Supply and fixing glass dividing strip 3 mm thick 38 mm wide and insert in position to conform to design, complete all as specified and directed.

All as per item No. 31 here-in-before but exceeding 1.5 Sqm and not exceeding 4 Sqm each.

Taking down shutters of any description exceeding 1.00 sqm but n exc 2.00 sqm each, complete all as specified and directed.

Supply and fixing factory made pressed steel frames made out from 1.25mm thick steel sheet for doors of size 125x60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc.and including treated with tar or coal tar black with 2 coats of synthetic enamel paint over a coat of red oxide primer on steel surfaces in contact / embeded in concrete or masonary work including Filling hollow portion of frame with PCC 1:3:6 type C-1, complete all as specified and directed.

Supply and fixing factory made pressed steel frames made out from 1.25mm thick steel sheet for doors of size 105x60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc.and including treated with tar or coal tar black with 2 coats of synthetic enamel paint over a coat of red oxide primer on steel surfaces in contact / embeded in concrete or masonary work including Filling hollow portion of frame with PCC 1:3:6 type C-1, complete all as specified and directed.

Supply and fixing steel ventilator with top hung shutter including hinges, steel peg stay etc, complete all as specified and directed.

Supply and fixing factory made Box type steel window, double shutter (glazed and wire gauzed) with side hung shutters including box type hinges, steel handles fabricated type for each leaf duly welded, mild steel barrel tower bolts 150mm size (02 Nos for each leaf) duly welded, complete with glazing bars dovetailed or welded including MS fillets, including MS guard bars 10mm dia Square bar 125mm c/c and welding of guard bars including one shop coat of red oxide primer over window, frame & guard bars complete all as specified and directed. Notes: - (i) Glazing & Wire cloth shall be measured and paid separately. (ii) The term double shutter stated is meant for providing glazed shutter as well as wire gauged shutter on outside & inside of the frame respectively.

Supply and fixing in repairs 18/19 mm thick Veneered particle board, interior grade, solid core, with decorative veneer on both face, general pupose type fixed with screws to timber frame work, complete all as specified and directed.

Material and labour for 6mm thick external teak wood lipping fixed to18/19mm thick block board or veneered particle board fixed with nails, complete all as specified and directed.

Material and labour for providing and injecting chemical emulsion (in oil or kerosene based solution) for post constructional antitermite treatment of wood work using emulsion @ 0.5 liters per hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing holes with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floors, complete all as specified and directed.

Supply and fixing in replacement continuous (piano) hinges, mild steel, bright finish or electro galvanised with 40 mm width flaps when open, complete all as specified and directed.

Supply and fixing in replacement 100mm Hasp and staple, safety type aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws, complete all as specified and directed.

Supply and fixing in replacement ball catches with 8mm dia steel ball and brass body and striking plate including letting in and fixed, complete all as specified and directed.

Supply and fixing factory made Plain, framed, panelled shutters, 35mm thick, 2nd class hard wood, plain, framed, panelled shutters (any number of panels), with panels of 9mm thick veneered particle board medium density, wood particle board with commercial face veneers supplied and fitted to chowkats, complete all as specified and directed.

Supply and fixing 35 mm thick glazed and skeleton shutters of 2nd class hardwood open rebated and prepared to receive glass, gauge etc, (without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc. size of member of shutter as specified in SSR Pt-I section 8 clause 8.24 (a); supplied and fixed to chowkats, complete all as specified and directed. Note: Glazing and Wire cloth shall be measured and paid separately.

Supply and fixing PVC door frame of size 50x47 made out of 5mm wood grain printed PVC sheet, reinforced with ms square tube, complete all as specified and directed.

Supply and fixing 30mm thick PVC factory made moulded door shutter as IS-4020 made from MS tube of top and bottom rods.MS frame shall be covered with heat maulded wood grain colour PVC 'C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and wood grain printed PVC sheet for top rail ,lock rail & bottom rail on plain side & as gap insert for top and bottom rail. Pannelling of wood grain printed PVC sheet & 5 mm x 15 mm wide PVC beading used inside stiles and rails and decorative PVC beading of 10mm x 10mm (90 Degree) to be fitted in MS frame welded /sealed to the stiles & rails with suitable PVC sheet bedding and jointed together with solvent cement as per specification and drawings, complete all as specified and directed.

S&F cold rolled mild steel medium weight butt hinges 100mm size, complete all as specified and directed.

S&F aluminium anodised, barrel tower bolts of extruded section with length of bolt 200 mm and fixed, complete all as specified and directed.

S&F aluminium anodised, barrel tower bolts of extruded section with length of bolt 150mm and fixed, complete all as specified and directed

S&F 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and directed.

S&F Aluminium anodised Cast type handle of 150mm size, complete all as specified and directed.

S&F Aluminium anodised Cast type handle of 100 mm size for cupboard shutters, complete all as specified and directed.

S&F Mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate, complete all as specified and directed.

S&F in repair mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate, complete all as specified and directed.

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples, complete all as specified and directed.

S&F in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed.

Hacking out old broken glass any size, thickness from wooden or steel frames, complete all as specified and directed.

S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in square not exc 0.5 sqm in each pan, complete all as specified and directed.

Material and labour for prepration of new steel surfaces and applying 2 coats of synthetic enamel paint over a coat of red oxide primer on new steel surface of girth over 10 cm width or girth, complete all as specified and directed.

All as per item No. 60 here-in-before but except red oxide primer.

Material and labour for preparation of new wooden surfaces and applying 2 coats of synthetic enamel paint over a coat of pink primer on new wooden surface of girth over 10 cm width or girth, complete all as specified and directed.

Taking down or up steel tubing and connections inculding cleaning for refixing or removal to store 15mm bore, complete all as specified and directed.

Taking down or up steel tubing and connections inculding cleaning for refixing or removal to store 20mm bore, complete all as specified and directed.

S&F tube 'medium grade' galavanised, with all fitting and fixed complete to walls and ceiling etc 15mm bore, complete all as specified and directed.

All as per item No-65 here-in-before but 20mm bore, complete all as specified and directed.

Material and labour for PCC 1:3:6, type C-1,( Using 20mm graded stone aggregate) as in cills,steps and other similar bands, plinth courses, parapets, filling of mass concrete for stagging of water tanks, coppings, bed block of hold fast/bed plates etc including necessary form work, complete all as specified and directed.

S&F in repair PVC float Valve assy complete with float 20mm dia, complete all as specified and directed.

S&F in repair PVC lid/cover for any size of PVC tank, complete all as specified and directed.

S&F in repairs Chromium plated bib tap cast copper alloy with crutch or butter fly handle screwed down screwed for iron pipe and fixed to 15mm bore pipe any description, complete all as specified and directed.

S&F in repairs of 15 mm bore Stop valve/angle cock cast copper alloy screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe, complete all as specified and directed.

All as per item No.71 here-in-before but of size of 20mm bore.

S&F in repair Pillar tap fancy type, cast copper alloy, with capstan head chromium plated, screwed down high pressure, with or without letter 'Hot' or cold with long screwed shanks and fly nut screwed for iron pipe of bore 15mm, complete all as specified and directed.

S&F in repairs Bib tap standard of PTMT 15 mm dia any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/20mm-125gms), complete all as specified and directed.

S&F in repairs 32mm Waste coupling of PTMT (half or full threaded), complete all as specified and directed.

S&F in repair grating of 100mm dia of PTMT, complete all as specified and directed.

S&F in repair grating of 125 mm dia with waste hole of PTMT, complete all as specified and directed.

S&F in repair PVC Bath cabinet with mirror 40cmx50cm as per sample kept in GE's office, complete all as specified and directed.

S&F in repair PVC connection 450mm long with PTMT nuts, complete all as specified and directed.

S&F in repairs brass chromium plated shower rose 125mm size with swivel joint, complete all as specified and directed.

S&F in repair Towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 190gms), complete all as specified and directed.

S&F in repair towel Ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats complete all as specified and directed.

S&F in repairs Vitreous china ware water closet Orissa pattern including 'P' or 'S' trap connecting to trap and to flushing pipe anti Syphonage pipe etc complete with foot rest of size 580mm X 440mm (jointed with epoxy raison to glazed trap) including provision of lime concrete bedding, complete all as specified and directed.

S&F in repairs Wash Hand Basin in vitreous white chinaware of 550x400 mm size including CI/MS brackets, PVC waste pipe, waste coupling of suitable size / length including all connection, complete all as specified and directed.

S&F in repairs Vitreous china ware water closet (padestal pattern) with PVC seat cover white (excluding fixing bolts, flushing cistern and flush pipe), complete all as specified and directed.

S&F in repair of Health faucet (ABS body) mild steel chromimum plated suitable for 15mm dia pipe with 1.25 m long flexible tube and ABS wall hook including making connection and fixed in position, complete all as specified and directed.

S&F in reapirs cast iron floor trap of 75 mm dia, chromium plated grating including jointing to waste pipe with lead joints and fixed in cement concrete 1:2:4, type B-0 (using 12.50 mm graded stone aggregate), complete all as specified and directed.

S&F in reapirs cast iron floor trap of 100 mm dia, chromium plated grating including jointing to waste pipe with lead joints and fixed in cement concrete 1:2:4, type B-0 (using 12.50 mm graded stone aggregate), complete all as specified and directed.

S&F in repair rotational moulded water storage tank (cylinderical vertical with closed top) hoisted and fixed in position capacity 750 ltrs, triple layer, white colour, with 20mm ball valve high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball (Minimum weight 210 gms), complete all as specified and directed.

S&F in repair rotational moulded water storage tank (cylinderical vertical with closed top ) hoisted and fixed in position capacity 500 ltrs, triple layer, white colour, with 20mm ball valve high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball (Minimum weight 210 gms), complete all as specified and directed.

S&F in repairs syphonic action PVC low level flushing cistern of 10 ltr capacity including internal fittings, brackets, 32mm flush pipe etc, complete all as specified and directed.

S&F in repair PVC syphon kit with handle for PVC low level flushing cistern capacity 10 ltrs, complete all as specified and directed.

Disconnecting existing tank exc. 250 Litres but not not exc. 500 Litres capacity, setting aside (or lowering if required), cleaning and removing all scale and dirt etc. from tanks and from mouths of circulating pipes for repairs, cleaning etc and hoisting if required, reconnecting and re-fixing in same position including writing date of cleaning in ---DD/MM/YYYY-- with synthetic enamel paint etc complete all as specified and directed.

Demolition/breaking up or down PVC /AC/CI/Cement drain pipe any size fixed in any position, complete all as specified and directed.

S&F 110 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, in any position(with clamps in wall) as in rain water pipe etc, complete all as specified and directed.

S&F 75 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, in any position(with clamps in wall) as in rain water pipe etc, complete all as specified and directed.

S&F PVC (SWR) bends 110 mm dia, complete all as specified and directed.

S&F PVC (SWR) bends 75 mm dia, complete all as specified and directed.

S & F in repair stainless steel plate rack made out of 1mm thick steel sheet of size 75cm x 90cm x 25cm with fixing arrangements complete as per sample kept in GE’s office suitable for officers quarters, complete all as specified and directed.

S&F in repair stainless steel sink with drainage board made out of 1.00mm thick sheet for kitchen or laboratory, with plug, waste pipe, washers incl. cantiliver cast iron brackets, connecting union etc overall size 915mm X 460mm with bowl size 410mm X 330mm X 160mm, complete all as specified and directed.

S&F in repair 25 mm dia Harison rails, mild steel , chromium plated with fixing fancy type brass CP brackets and side knobs, stops, rollers etc. as in curtain rod and fixed to wall, complete all as specified and directed.

S&F in repair 32/40mm dia waste pipe for sink/wash basin, flexible and expandable length upto 900mm, complete all as specified and directed.

S&F in repair stainless steel soap dish any type fixed to plugs with chromium plated brass screws, complete all as specified and directed.

S&F in repair Sheet glass shelf assembly for corners/WHB consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, complete all as specified and directed.

S&F in repair brass, CP, central hole wash basin mixer (hot and cold) with long flexible pipe of bore 15mm, complete all as specified & directed.

S&F in repair Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed to flexible pipe of bore 15mm, complete all as specified & directed.

S&F in repair aluminium anodised powder coated frame, for doors, windows, ventilator with one or more rebates including joining cleat for fixing etc, complete all as specified and directed. Note :- Minimum thickness of powder coating shall be 50 micron thick.

S&F in repair anodised aluminium powder coated door shutters, aluminium section weighing 0.55 kg/m with and including necessary joining cleats, glazing clips, rubber neopene packing, extruded anodised aluminium alloy fabricated type handles of size 150mm 2 Nos is each door, stainless steel hinges, anodised aluminium snap beading for fixing glass panes /other filling material in panels, screws etc, complete all as specified and directed. Note :- (i) Glass panes / other filling materials in panels shall be masured and paid separately. (ii) Minimum thickness of powder coating shall be 50 micron thick.

Supply and fixing in repair aluminium powder coated window and ventilator with side hung shutters with sash bars section weight 0.55 kg/RM, including necessary jointing cleat glazing,clip,handles CP hinges, tower bolts etc packing,anodised snap beading, screws neoprene rubber packing, complete all as specified and directed. Note :- (i) Glass shall be measured and paid seperately. (ii) Powder coating sheets be 50 micron thick.

S&F floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring fixed in floor, over all length of cover plate 150mm, complete all as specified and directed.

S&F in repair floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring fixed in floor, over all length of cover plate 150mm, complete all as specified and directed.

S&F in repair aluminium (extruded section body) door closer hydraulically regulated, designation No 3 universal type suitable for door shutter of 851 to 1000mm in width and fixed, complete all as specified and directed.

S&F in repair 100mm, 4 levers, aluminium mortice lock vertical type, complete all as specified and directed.

All as per item No. 115 here-in-before but 5.5 mm thick glass in panes each exc. 0.5 sqm.

Supply only liquid Water proofing compound (WPC), complete all as specified and directed.

S&F in repair tank Nipple/socket 15 mm dia suitable for HDPE water tank (Minimum weight 15 mm-38gms/20mm-45gms /25mm- 65gms), complete all as specified and directed.

S&F in repair tank Nipple/socket 20mm dia suitable for HDPE water tank (Minimum weight 15 mm-38gms/20mm-45gms /25mm- 65gms), complete all as specified and directed.

S&F Plastic water closet seat, black/white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S&F Brass Plugs/reducer/extensor/Elbow/Tee etc of 15mm/20mm dia as per site requirement, complete all as specified and directed.

S&F in repair Brass concealed valve etc of 15mm/20mm dia as per site requirement, complete all as specified and directed.

M&L for Door easing/welding in repair of hinges to fixing door and window including connecting neccesary items and refixing in same position finishing with existing and touch up with paint if required and neccesary work, complete all as per specified and directed.

M&L for preparation of old decorated/painted surfaces of wall of any description with filling holes / cracks with wall care putty and applying one coat of exterior acrylic emulsion paint in camouflage pattern (grey/light black ) using minimum 3 or 4 different approved tint/colour as approved by GE, complete all as specified and directed.

M&L for preparation of old decorated/painted surfaces of wall of any description with filling holes / cracks with wall care putty and applying two coat of exterior acrylic emulsion paint in camouflage pattern (grey/light black ) using minimum 3 or 4 different approved tint/colour as approved by GE, complete all as specified and directed.

M&L preparing new wall surfaces, and applying two coats of exterior acrylic emulsion paint in camouflage pattern ( grey/light black ) or as approved by user using minimum 3 or 4 different approved tint/colour as approved by GE, complete all as specified and directed.

M&L for prepration of old rusted steel by removing rust with sand paper and scrapping down the old paint completly on surface of steel of any shape and applying two coats of premium exterior acrylic emulsion paint in camouflage pattern, using minimum 3 different approved tint /colour as approved by GE, but height of this store/any building is upto 8m, complete all as specified and directed. Notes : (i) The rates quoted by the Contractor are deemed to be inclusive for use of scafolding and cradles including hoisting and lowering as required on ground.

S&F in replacement single pole and neutral encloser with two pin and earth plug and socket complete with one single pole MCB of 32 amps and all as per the specifications, complete all as specified and directed.

Taking down aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc using wall care putty and distemper, complete all as specified and directed.

Material and labour for point wiring concealed type complete with 1.5 sqmm PVC insulated unsheathed and multi-stranded FRLS copper conductor with and including PVC conduit 20 mm bore having 2 mm wall thickness with all conduit accessories for one light /fan/buzzer/soket outlet point controlled by one switch including continuous 1.5 sqmm copper conductor, stranded (green colour, earth), PVC insulated unsheathed earth wire to common earth and connected to earth dolly to be terminated in and including suitable size module boxes / flush type for housing of module/ flush type (PT) switches/sockets etc, complete all as specified and directed. Note :- Unit rates quoted by contractor shall be deemed to included for cutting chases in walls and making good in cement morter (1:3) and finishing the surface to match with exisiting surface using wall care putty and distemper.

One light point / celing/Exhaust fan point/Bell Point controlled by one 6 Amp one way switch.

One 5 pin 6 Amps switch socket outlet point on independent board.

One 5 pin 6 Amps switch socket outlet point on same board.

All as per item No. 130 here in before but 2.5 Sqmm copper conductor wiring with 2.5 Sqmm copper conductor as earth continuity for 15/16 Amps socket out let on independent board.

M & L for point wiring complete with 1.5 Sqmm PVC insulated and unsheathed FRLS cable single core multi stranded copper conductor, 1100 volts grade drawn through and including PVC casing / capping including copper earth continuity wire of PVC insulated of size 1.50 Sqmm and connected to common earth dolly with all accessories (gang box for switch socket, ceiling rose box, holder box, tee, bend etc), complete as specified and directed for : -

One light point /celing/Exhaust fan/bell point controlled by one 6 Amp one way switch

One 5 pin 6 Amps switch socket outlet point on independent board.

One 5 pin 6 Amps switch socket outlet point on same board.

All as per item No. 131 here in before but 2.50 Sqmm copper conductor wiring with 2.50 Sqmm copper conductor as earth continuity for 15/16 Amps socket out let on independent board.

Supply and fixing switch modular type single pole one way 6 Amps, 1 module, complete all as specified and directed.

Supply and fixing switch modular type single pole one way 16 Amps, 1 module, complete all as specified and directed.

Supply and fixing socket outlet modular type 2/3 pin combined 2 module, 6 Amps, complete all as specified and directed.

Supply and fixing socket outlet modular type 2/3 pin combined 2 module, 16 Amps, complete all as specified and directed.

Supply and fixing of Ceiling rose, surface bakelite, 65 x 17 mm three terminals, complete all as specified and directed.

Supply and fix in replacment of Existing bulb to LED Bulb 10 watt, retrofit pin type, B22 Base cap, lumen output 950lm, 6500K colour temp, complete all as specified and directed.

S&F lamp holder PVC / Polycarbonate type with cord grip cap, insulated body, threaded dome pattern, suitable for pendant fittings, complete all as specified and directed.

S&F Buzzer, ding dong AC, 230 Volts, single pole, complete all as specified and directed.

Supply and fixing Modular Bell push 1 watt, 6 Amp, 1 module, complete all as specified and directed.

S&F Fan step regulator 120W, 2 module with box, cover and frame, complete all as specified and directed. .

S&F in repair light fitting with LED batten integrated channel 20 watt having input voltage AC90-300V, 50 Hz, 6500K, Ultra slim square profile with extruded polycarbonate tube light fitting wall mounted complete with rod, driver and all other accessories including connection with flexible cable copper conductor twin core of size 23/.2 mm upto ceiling rose/connector, complete all as specified and directed.

S & F in replacement light fitting with Inverter LED batten 20 watt having input voltage AC90-300V, 50 Hz , 6500K with square profile and polycarbonate channel. Lithium Ion battery with charging time 8hours-10 hours and back up time upto 4 hours, complete all as specified and directed.

S&F in repair LED batten integrated channel 10 watt having input voltage AC90-300V, 50 Hz , 6500K , polycarbonate housing with white acrylic cover tube light fitting wall mounted complete with rod, driver and all other accessories including connection with flexible cable copper conductor twin core of size 23/.2 mm upto ceiling rose/connector, complete all as specified and directed.

S & F in replacement light fitting with Water tight bulk head LED 10 Watt light fitting, comprision of connector galvanised cast iron back plate, weather proof enamelled gallery, glass well and including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose to fitting, complete all as specified and directed.

S&F in replacement building security light fitting with LED TYPE 35 watt optic lenses with all necessary acessories, Clear transparent acrylic cover, prewire suitable to operated on 230 volt 50 HZ AC & Supply and fixing to wall / on pole including fixing arrangement with suitable galvanized iron pipe 32 mm bore “light grade” brackets 1.5 mtr length bent to shape to obtained required shape including clamps, nuts / bots / washers etc connecting with suitable flexible copper wire of size 23/0.0076, complete all as specified and directed.

S&F in replacment of module switch 1 way 6 Amp, 1 module, complete all as specified & directed.

S&F in replacment of module switch bell push type 1 way 6 Amp, 1 module, complete all as specified & directed.

S&F in replacment of module switch 1 way 16 Amp, 1 module, complete all as specified & directed.

S&F in replacment of modular socket, 6 Amps, 2/3 pin combined 2 module, complete all as specified & directed.

S&F in replacment of modular socket, 6/16 Amps, 2/3 pin combined 2 module, complete all as specified & directed.

S&F in replacment of modular step fan regulator 1 module, complete all as specified & directed.

S&F in replacment of modular step fan regulator 2 module, complete all as specified & directed.

S&F white cover plate with frame ,1 module, complete all as specified & directed.

S&F white cover plate with frame, 2 module, complete all as specified & directed.

S&F white cover plate with frame, 3 module complete all as specified & directed.

S&F white cover plate with frame, 4 module complete all as specified & directed.

S&F white cover plate with frame, 6 module complete all as specified & directed.

S&F white cover plate with frame ,8 module square shaped or rectangular module complete all as specified & directed.

S&F Modular metal flush box,1 module complete all as specified & directed.

S&F Modular metal flush box, 2 module complete all as specified & directed.

S&F Modular metal flush box , 3 module complete all as specified & directed.

S&F Modular metal flush box ,4 module complete all as specified & directed.

S&F Modular metal flush box, 6 module complete all as specified & directed.

S&F Modular metal flush box, 8 module square shaped or rectangular complete all as specified & directed.

S&F in replacement switch socket combination outlet , 2 in 1, multipurpose 3 pin, 5/15 Amps, flush type having four holes for fixing complete all as specified and directed.

S&F in replacement switch piano flush button SP one way 5 Amp complete all as specified & directed.

S&F in replacement switch piano flush button SP one way 15 Amp complete all as specified & directed.

S&F in replacement switch socket out let, 3 pin 5 Amp, flush type, multipurpose complete all as specified & directed.

S&F in replacemnt Socket outlet 2 in 1, 3 pin, 6 and 16 amp flush type complete all as specified & directed.

S&F in replacemnt Socket outlet 5 pin 5 Amps flush type complete all as specified & directed.

S&F in replacement bell Ding Dong, AC, 230 volts, single pole controlled by one bell push complete all as specified & directed.

S&F in replacement bell push, AC, 230 volts, single pole complete all as specified & directed.

S&F in replacement electronic resistance step speed regulator flush switch type, suitable for 1200 mm sweep ceiling fan up to 300 watt complete all as specified & directed.

S&F in replacement lamp holder PVC/ Polycarbonate type with cord grip cap, insulated body, threaded dome pattern, suitable for pendant fittings complete all as specified & directed.

S&F in replacemnt Sheet metal enclosures factory made, (Double Door) for DBs, single pole and neutral, 240 volts, 8 ways fixed on walls, including connecting both incoming and outgoing cable termination with proper taping, lagging, testing and commissioning, complete all as specified and directed.

S&F in replacemnt MCB single pole & Netural 32 Amps 230 Volts 'C' series, 25KA , complete all as specified and directed.

S&F in replacement MCB's single pole 240 volts 6 to 32 Amps 10 KA 'C' series complete all as specified & directed.

M&L in replacemnt earthing complete with galvanized steel earth plate electrode 60cmx 60cmx6mm thick buried directly in ground (earth pit not less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.5m below normal ground level, connected to galvanized iron wire 4.0mm dia by means of bolts, nuts and washers of galvanized iron or steel, protected by GI light grade pipe 15mm bore including GI light grade water pipe 20mm dia with funnel all as shown in electric plate No. 03 of 200g SSR Pt-I and testing on complete including earth work in any type of soil, PCC 1:2:4 type B-0 as in earth pit and RCC cover 40mm thick reinforced with XPM (weight not less than 4.0Kg/Sqm) and frame of angle iron 25x25x3mm with lugs 2 Nos and with 6mm dia MS bar handle made to shape, common salt, charcoal and testing on completion including 2 coats of synthetic enamel paint over a coat of red oxide primer on exposed steel surface, complete all as specified and directed.

Dismantling of ceiling fans/wall fans of any size and deposite to MES store yard, complete all as specified and directed.

M&L for painting of Exhaust fans complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc, complete all as specified and directed.

M&L for Hanging only ceiling fan /Exhaust Fan and connecting up including provision of cable from ceiling rose or connector to fan, complete all as specified and directed.

S&F in repairs sheet metal enclosure for double door DBs made out of CRCA mild steel sheet surface with insulated material like polyester with epoxy powder coated surface mounted VTP & N 4 ways, 415 Volts, ISI marked 200 amps bus bar stove enameled dust and vermin proof suitable for incorporation MCCB and isolators etc including fixing in Wall with Cement mortar, complete all as specified and directed.

S&F in replacement MCCB TPN 63 Amps with breaking capcity 25 kA, Fixed TM and 415 volts AC Supply, complete all as specified and directed.

S & F in repairs MCB ‘B’ series type suitable for 240 volts, AC supply 40 to 63 Amps, SP & N with over load and short circuit protection and rupturing capacity not less than 10KA, complete all as specified and directed.

S&F in replacement Rigid non-metallic PVC conduit for segregarion of existing hanging wires ,medium grade 20 mm dia exclusive of boxes (junction/terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc, complete all as specified and directed.

S K BANSAL AND CO. (BID ID -3494534)

m/s k.k. construction co. (BID ID -3486567)

VISHAV CONSTRUCTIONS (BID ID -3488326)

OM CONSTRUCTION CO. (BID ID -3488624)