SPECIAL REPAIR TO BLDG NO T41 OR MD ACCN and T50 ( 01 TO 08) JCO ACCN AT BANA SINGH ENCLAVE AT TIBRI MIL STN UNDER GE GURDASPUR

Amount

Taking down chowkhats or frame not exc 1.5 sqm with shutters (without taking off shutters from frame) each complete all as specified and directed.

Taking down chowkhats or frame exc 1.5 sqm but n.exc 4 sqm with shutters (without taking off shutters from frame) each complete all as specified and directed.

Taking down shutter of any description size exc 1 sqm but n.exc 2 sqm complete all as specified and directed.

Taking down shutter of any description exc 1.0 sq.m but n exc 2 sq.m each and after easing and repair the shutter refixing in same opening complete all as specified.

Taking down cement plaster on brick or stone walls incl racking out joints etc,hacking for key, scrubing down with water etc & dispose off debris upto a distance n exc. 500 mtrs where directed complete all as specified.

M&L Rendering 15mm thick in CM 1:6 on brick work or concrete surface finish ever and smooth (w/o using extra cement) complete all as specified.

M&L, Rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surface finish ever and smooth complete all as specified.

M&L, Rendering 5mm thick in CM 1:4 over concrete surface as on ceiling finish even and smooth w/o using extra cement all as specified.

M&L preparation of new plaster surfaces of walls and applying two coats of oil bound diatamper over 1 mm thick wall care putty complete all as spcified.

M&L preparation of new plastered surfaces of walls and applying two coats cement base paint complete all as specified.

M & L three coat of white wash incl preparation of new plaster surface of ceiling all as spd directed.

M&L preparation of old plastered surfaces of walls and applying one coats cement base paint complete all as specified.

M&L preparation of old plaster surfaces of walls and applying two coats of oil bound diatamper over 1 mm thick wall care putty complete all as spcified.

M&L for one coat of white wash on old ceiling.

S&F for box type steel window 1.25 mm thick made of ERW tube P-Section of size 60 x 25 mm double rebated outer frame comprise of glazed skeleton shutter(two gauged shutters and two glazed shutter) of ERW tube P-Section size 50 x 20 mm and 1mm thick one/two Nos openable leaf consisting of two Nos sash bar of T-Section 20x3mm welded to frame with one No Vertical mullion of ERW box type T-Section of size 60 x 25 mm and 1.25 mm thick and FI 2 mm thick welded / screwed to frame for fixing of glass including fittings and fixture like Handle, Tower Bolt, stopper, cleat, pintal hinges, hold fast etc. (a) Hold Fast, 150mm long of 120mm x 3 mm made to shape -04 Nos per window. (b) Handle of Z sec 20mm x 25mm, 100 mm long -1 No per leaf (c) MS Tower bolt 150mm long - 2 No per leaf (d) Z Sec 20mm x 25 mm, 100 mm long stopper - 1 No per leaf (e) Cleat 55 mm long of hollow square 15mm x 20mm x.63mm welded to hinge -1 No per leaf. (f) MS Pintal hinges of size 75mm x 12mm - 2 Nos per leaf (g) 10 mm square guard bar, 10 cm centre to centre. (h) 25x4 mm flat iron all around for joint of both frame. (j) Two coat of red oxide primer to MS window and guard bar. Note : Including taking down old steel / wooden window and making good dismantled portion with PCC 1:2:4 type B0 including hold fast PCC (four No’s for Each window) & around required plaster in CM 1:4 and match with existing finishing complete all as specified and directed by Engineer-in-charge.

S & F in repair mild steel box type ventilator fixed type with glazing bar with mesh & glass as per drg No. CEJZ/TD-06/07 dt 07.06.07 incl 12mm square guard bar 10cm c/c and two coat of synthetic enamel paint over one coast of primer complete including taking down of old ventilator wcomplete all as specified and directed. all as specified and directed.

S&F pressed steel frame 1.25 mm thick for door size of frame 125x60 mm with single or double rebates incl necessary fixing lugs hinges lock strike plate and filling chowkat with pcc 1:3:6 type C-1 using 20 mm graded stone agg and for filling of hold fast and tarring to inner surface of chowkat and hinges compl all as specified and directed mm thick flush shutter, soild core construction with block board core and plywood face panels commercial type on both side complete all as specified.

S&F pressed steel frame 1.25 mm thick for door size of frame 105x60 mm with single or double rebates incl necessary fixing lugs hinges lock strike plate and filling chowkat with pcc 1:3:6 type C-1 using 20 mm graded stone agg and for filling of hold fast and tarring to inner surface of chowkat and hinges compl all as specified and directed mm thick flush shutter, soild core construction with block board core and plywood face panels commercial type on both side complete all as specified.

S&F 35 mm thick flush shutter, soild core construction with block board core and plywood face panels commercial type on both side complete all as specified.

S & F 35 mm thick glazed and skelton shutters open rebated and prepared to receive glass, gauze, etc. (Without sash bars), edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, etc size of members of shutters as specified in SSR part-I, saection 8, clause 8.24 complete all as specififed and directed.

S&F Factory made solid panel pace door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel heaving a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing.

M & L for framed work as in doors of angle or other section complete drilled for fixing sheeting with all fitting and fixture complete (Fe 410-W (Gde-E-250) quality A) including welding complete all as specified and directed.

S & F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples all as spd and directed.

M&L for PCC(1:2:4), type B I, using 20 mm graded aggregate in hold fast for all as specified and directed.

S & F 3.0 mm thick sheet glass, ordinary quality and with oil putty in Square n. exc 0.5 sqm in each pane complete all as specified and directed.

S & F 3.0 mm thick figured glass, pin head quality and glazing with oil putty in Square n. exc 0.5 sqm in each pane complete all as specified and directed.

S & F mild steel tower SLIDING DOOR BOLT bolt size stove enameled black 12 MM DIA WITH AND INCL MIN 6 bolts complete all as specified.

S & F mild steel tower bolt 150mm size stove enameled black complete all as specified.

S & F allumunium tower bolt 150mm size stove enameled black complete all as specified.

S & F mild steel presed handle 150mm size stove enameled black complete all as specified.

S & F allumunium handle alloy bolt 150mm size stove enameled black complete all as specified.

S&F in repair floor door stopper 140mm of aluminium alloy body and touge anodised, with hard drawn steel spring fixed and complete all as specified and directed.

S & F of 18/19 mm veneered particle board solid core interior grade with pre laminated one side with decorative choice lamination and other side balancing white lamination fixed with screws to timber frame work

S & F IN REPAIR of 18/19 mm veneered particle board solid core exterior grade with decorative commercial type fixed with screws with timber frame work

S&F butt hinges 100mm long medium weight cold rolled mild steel fixed with steel screws complete all as specified.

S & F 100mm long with hasp and staple safety type brass with mild steel hinge pin incl bolt hinges fixed with screws complete all as specified.

S&F 300 mm ordinay rat tail rod pattern springs incl roller and rubber plate fixed to chowkhats and necessary welding if reqd complete all as specified as directed.

M&L preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified.

M&L preparation of new wooden surfaces and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified.

Demolition of plain cement concrete in sunken floor exc 15cm thick (above ground level) and disposing the rubbish to a distance exc. 50 mtrs but not exc 100m away to low lying area complete all as specified and directed.

S&F (minimum) 3mm thick APP film based poly meric membrance minimum weighing 3Kg per Sqm reinforced with polyester non wove fabric (weight not less than 150 gms/sqm) land on primed surface by forced application along the length of 100mm lapping strip to either sides and sealed in after cleaning down and applying bituminous 85/25 @ 1.20 kg/ sqm compl all as specified and directed the roof complete all as specified and directed.

M&L for Rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM 1:4 using WPC 2% of weight of cement and finishing even and smooth without using extra cement complete all as specified and directed.

M&L for PCC(1:7:12), type F-2, using 40 mm graded aggregate as foundation / mass concrete complete all as specified and directed.

M&L for PCC(1:2:4), type B-O, using 12.5 mm graded aggregate as sunken portion complete all as specified and directed.

Roughning surfaces of old concrete floor by picking sweeping clean and washing down with water to remove dust incl brushing neat cement slurry with 3.0 kg of cement per sqm

S&F Coloured/printed non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0. 11 sqm but not exceeding 0.18 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or Coloured cement to match over 15 mm thick screed bed or bedding layers in CM 1:6. complete all as specified and directed

S&F Coloured/printed non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0. 18 sqm but not exceeding 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or Coloured cement to match over 15 mm thick screed bed or bedding layers in CM 1:6. complete all as specified and directed

S&F Coloured/printed non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0. 06 sqm but not exceeding 0.11 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or Coloured cement to match over 15 mm thick screed bed or bedding layers in CM 1:6. complete all as specified and directed

S&F Glazed ceramic colour tiles in vertical surface 350x250mm x 7 450x350x7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 10mm thick cement plaster in CM 1:4 including taking down old demolished tile and desposing off away from 50 mtr away complete all as specified as directed.

S&F in repair for Vitreous china squatting pan of (Orisa Pattern) size 440x580 mm white integral foot rest and PVC (SWR) P trap 110 mm bore complete all as specified and directed.

S&F in 10 ltr capacity low levels flushing cistern white low level with ball float valve incl bracket complete all as specified and directed.

S&F flush pipe of polythelene of low or high density or pvc 32 mm dia for low level flushing cistern

S&F in repair Vitreous china wash hand basin white flat back size 550x400mm including PTMT waste coupling, pvc 32 mm BORE WASTE PVC PIPE COMPL PILLAR tap complete all as specified.

S&F PVC connections 15 mm size with PTMT nuts of length 450 mm.

Dismantaling of brickwork, built in cement mortar incl quoins ,arches pillars etc compl all as specified all as specified and directed

M&L for brick work with sub class 'B', old size bricks, straight or curved on plan, exceeding 6 metre mean radius, built in cement mortar 1:4 complete all as specified.

M&L for brick work with sub class 'B', old size old serviceable brick obtained from dismantling, straight or curved on plan, exceeding 6 metre mean radius, built in cement mortar 1:6 complete all as specified. Note: Old serviceable brick obtained from dismantling to be reused.

Dismantling water tanks Exc 250 Ltr & not exceeding 500Ltr and S&F rotational moulded polythene, triple layers, water storage tank 500 Ltr capacity, closed top, cylindrical, hoisted and fixed in position including S&F 20mm bore PTMT ball valve epoxy coated minium weight 210gms with aluminium rod complete all as specified and directed

Taking up or down existing steel water tubing, 15mm bore alongwith connections fixed/laid in any situation, complete all as specified

S&F Galvanised iron steel water tubing, 15mm bore, medium grade with all fittings and fixed to walls and ceilings or laid in floors complete all as specified.

Fixing only, after cleaning old steel water tubing, 15mm bore and connections in new or old position using new fittings complete all as specified.

Taking up or down existing steel water tubing, 20mm bore alongwith connections fixed/laid in any situation, complete all as specified

S&F Galvanised iron steel water tubing, 20mm bore, medium grade with all fittings and fixed to walls and ceilings or laid in floors complete all as specified.

Fixing only, after cleaning old steel water tubing, 15mm bore and connections in new or old position using new fittings complete all as specified.

S&F in repair 15mm bore Stop valves, cast copper alloy, screwed down , high pressure, with crutch or butterfly handles , screwed both ends for iron pipe or for unions, fancy type, chromium plated with long shank and cup ( concealed type) and fixed.

S&F in repair 20 mm bore Stop valves, cast copper alloy, screwed down , high pressure, with crutch or butterfly handles , screwed both ends for iron pipe or for unions, fancy type, chromium plated with long shank and cup ( concealed type) and fixed.

S &f in repair angel stop valve 15mm dia cast copper along chromium plated with capstan head screwed both ends for iron pipe or for union all as specified and directed.

Supply and fixing in REPAIR bib tap, 15mm dia chromium plated fancy type long body with capstan head screwed down screwed for iron pipe or for brass ferrule all as specified and directed.

S&F in repair brass chromium plated shower rose 125mm size all as specified.

S & F 100 mm dia CP gratings with or without hinge type or hole type complete.

Taking down eaves gutters and rain water pipes incl all fittings head shoes bends swans neck incl clening or refixing or removal to store

Supplying and fixing PVC (SWR) pipes single socketed, dia of pipe 110mm, in any length with rubber ring joints, fixed to wall with necessary MS stack clamps or laid in trenches, under floor complete all as specified.

Supplying and fixing PVC (SWR) pipes single socketed, dia of pipe 75mm, in any length with rubber ring joints, fixed to floor with necessary MS stack clamps or laid in trenches, under floor complete all as specified.

Supplying and fixing PVC (SWR) pipes single socketed, dia of pipe 75mm, in any length with rubber ring joints, fixed to floor with necessary MS stack clamps or laid in trenches, under floor complete all as specified.

Supplying and fixing PVC (SWR) bend pipes single socketed, dia of pipe 75mm, in laid in trenches, under floor complete all as specified.

Supplying and fixing PVC (SWR) bend pipes single socketed, dia of pipe 110mm, in laid in trenches, under floor complete all as specified.

Supplying and fixing PVC (SWR)cowl pipe dia of pipe 110mm, i complete all as specified.

Supplying and fixing PVC (SWR)cowl pipe dia of pipe 75mm, complete all as specified.

S & F 75mm bore floor trap plain incl grating jointing with cealing compound complete all as specified.

Demolition of un-reinforced cement concrete in ground floor and paving not exceeding 15 cm thick (below or above ground level) and disposal of unserviceable tiles to a distance n. exc 100 m compl all as specified and directed

Dismantaling of brickwork, built in cement mortar ,seperation ,cleaning and stacking of serviceable bricks for reuse and removal of debris rubbish to a distance exc 400 m, but not exc 500 m compl all as specified all as specified and directed

M & L 40 mm thick for PCC 1:2:4 type B1 (using 20 mm graded stone aggregate As in floor finish complete all as specified and directed..

M & L 50 mm thick for PCC 1:2:4 type B1 (using 20 mm graded stone aggregate As in pliunth protection complete all as specified and directed..

M & L 75 mm thick for PCC 1:4:8 type d1 (using 40 mm graded stone aggregate As in as sub base floor finish complete all as specified and directed..

M & L machine pressed coloured chequered tiles of size 300 x 300 x 25 mm thick laid over 15 mm thick screed bed in CM 1:6 bedded and jointed in neat cement slurry and pigment complete all as specified and directed.

M&L for brickwork with sub class 'B' bricks, straight or curved on plan to any radius in half brick thick wall built in cement mortar 1:4.

Demolistion of stone slab and tiles of any description or thickness in floors

Material and labour black zebra bhainsalana marble / green marble 18-20mm thick, any type, table rubbed and polished, in cooking plateform and like, set in cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of marble over and including 15mm thick cement screed bed in CM (1:4), including taking down existing stone slab, tiles etc complete all as specified

Material and labour granite 14-18mm thick, any type, table rubbed and polished, in cooking plateform steps jams pillars windows cills and like, set in cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of marble over and including 15mm thick cement screed bed in CM (1:4), including taking down existing stone slab, tiles etc complete all as specified

Material and labour for reinforced cement concrete,1 :2:4 type B-1,, as in slabs supported on walls, beams and columns in floor, roofs, chhajjas, shelves, landing and the like including form work to soffits and sides of concrete incl demolistion complete all as specified and directed.

S&F in repair CP Tubular towel rail 20mm dia ,D type ,600mm long between flange complete all as specified.

S&F Mild steel TMT bars 8mm to 10 mm dia and over cut to length bent to shape required including cranking bending and binding with wire (annealed) not less than 0.9mm or scouring with clips.

Form work to chulla hoods chajjas weather shades corbels water troughs and similar items incl edge rough finished surfaces of concrete compl all as specified and directed

s &f sink with drainage board made of steel stainless 1 mm thick with plugs washers and waste pipe copl incl bedding in cement mortar to dwarf wall or fixing cantilever brackets and connecting union to piupe over all min size 915mm x 460 mm bowl size 410x330x 160mm compl all as specified and directed

S&F in stainless steel kitchen plate rack size 900 x 600 x 300mm deep made out of 1mm thick sheet including fitting arrangement complete.

Supply and fixing, in replacement,25 mm dia MS pipe PVC powder coated chromium plated including brackets stop rollers incl fancy type knobs two nos to each curtain rod complete all as specified .

Dismantling brick tiles laid in single layer jointed & pointed in cement mortar complete all as specified.

Demolition of mud phuska in roofs, any thickness, including leeping plaster (whether full thickness removed or only a part thereof) complete all as specified.

M&L for 40 mm thick cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregates) with WPC @ 3% by weight of cement p[er sqm finished even and smooth with out using extra cement complete all as specified and directed

M&L for 40 mm thick brick tiles laid on 15mm thick cement mortar 1:6 and joints grouted flush in cement mortar ( 1:3) mixed with 5 % of crude oil by weight of cement complete all as specified and directed

All a per Srl item No 108 above here-in-before but except tiles (old serviceable tiles obtained from dismantling) shall be reused after necessary cleaning of mortar)

M&L for PCC 1:2:4 type B-1 (using 20mm graded stone aggregates) as in roof padding ,roof kerbs or mud stops,and like including weathering slight rounded and throating complete all as specified and directed

Taking down cement plaster of any description on rcc chajjas / facias /rcc beam /rcc slab/ racking out joints hacking for key scrubbing down with water at height of 4.5 Mtr brick walls, etc including raking out joints, hacking for key scrubbing down with water etcRendering 15 mm thick on fair faces of brick work or concrete surfaces in CM 1:3 using WPC 2% of weight of cement and finishing even and smooth without using extra cement complete all as specified and directed

S & F for shelf of PTMT fixed with and incl cromium plated brass screws and wooden plastic cleats

S & F of MS stays for rain water pipe made up of FUI 25X 3MM conforming to Fe-410-o or FE-310 -O complete all as specified and directed.

Taking down old unserviceable COPPER/ALUMUNIUM point wiring from existing conduit / batten type (light, fan, socket or power point) complete such as switches, ceiling rose, pendent holder, regulator and socket etc and removing the material from site and making good the disturbed surface of wall / floor/ ceiling etc as original i.e. brick work, plastering, white washing complete all as specified and directed.

M&L for point wiring for one light/fan/bell/buzzer point controlled by one 1-way switch complete with 1.5 Sq mm (nominal area) FR, PVC insulated, un-sheathed and stranded copper conductor cable ISI marked, in and including PVC concealed conduit ISI marked of size not less than 20 mm dia and 1.5 mm wall thickness and PVC conduit fittings such as tees, bends, elbow, reducers, in existing junction box including cutting, chasing, making good in CM 1:3 and 1.5 Sq mm (nominal area) FR, PVC insulated, un-sheathed and stranded copper conductor cable ISI marked as earth wire, connecting to common earth dolly with thimble, including pressed steel powder coated MS sunken box of suitable size, covered with & including 3 mm thick bakelite, laminated hylem sheet top cover and making good surface as original by plastering and white / colour wash / distemper etc complete all as specified. Note: The cost of MS sunken box and bakelite sheet is included in the unit quoted rate.

All as per item NO 114 above 5 pin 5 amps socket on indpendent board

All as per item No 114 above 5 pin 5 amps socket on same board

All as per Srl Item No 114 above but with 2.5 Sq mm FR copper wire with 1.5 Sqmm for 3 pin 15 Amp modular type socket outlet FR copper earth wire for power point on independent board. Note:Point wiring for power point will not be mixed with light /fan point circuit or not in the same conduit pipe

M & L sub main wiring with 2 single core pvc insulated unsheathed stranded copper conductor cable FRLS of size 6 sqmm and one PVC insulated unsheated copper conductor cable FRLS of size 6.0 sqmm as earth wire fixed in and incl concealled non metalic PVC conduit of appropriate dia compl all as specified Note : Three runs of 6.0 Sqmm wire shall be measured as one unit.

Supply and fixing of switch piano flush button single pole one-way 5 Ampere complete all as specified and directed

Supply and fixing of socket outlet 5 Ampere, 3 pins , flush type 250 volts AC complete all as specified and directed.

Supply and fixing of socket outlet1 5 Ampere, 3 pins , flush type 250 volts AC complete all as specified and directed.

Supply and fixing of switch flush button single pole one-way 15 Ampere complete all as specified and directed. Make Anchor/Plaza/SSK

S & F LED Tube light 20w ultra bright Polycarbonate tube light with very high efficeancy suitable for fitting into existing new tubelight battern fittings all as directed

S & F on 2 pvc square blocks surface mounting universal battern housing made of powder coated CRCA sheet suitable for upto 1 x 18/20 W LED tube light rod single sided incl taking down old unserviceable fittings all as directed

Taking down carefully ceiling fans exhaust fans compl fittings at site removing fans are depositing as directed by Engineer in chargeand refixing after completiobn of work at site

Hanging only ceiling fan carefully and connecting up and ceiling rose or connected to fan

Supply and Fixing in replacement GI pipe light grade 32/40mm dia and bend to shape 1.5mtr long MS clamp made out of MS flat iron of size 40x4 mm thick with nuts and bolts washers compl incl dismanteling ofg existing GI pipe bracket and drilling of holes for nut and bolts as directed by Engr-in-Charge.

Supply and fix in new energy saving LED 45 Watt street light IP-66 LUMINARIES with long life versatile pressure die cast al housing with high power LED as lighting sources and lens embede pc cover road way with complete asssesories connecting up with 3 core flexible copper conductor cable compl all as specified and directed

Supply and fixing of single phase call bell ‘DING DONG’, AC 230 volts single pole fixed over and including pressed steel sunk box of size 175 X 100 mm duly covered with 3 mm thick bakelite sheet complete all as specified and directed. Make Anchor/Plaza/SSK

S&F bell push, flush type, single pole 5 amps complete all as specified and directed.

S & F lamp holder, PVC / polycarbonate type insulated body with back plate suitable for batten / angle fittings complete all as specified and directed. Make Anchor/Plaza/SSK

S&F ceiling rose surface bakelite 65x 50mm three terminal

S & F fan regulator electronic step type socket size and making all necessary connections complete all as specified and directed.Make Anchor/Plaza/SSK

S & F sheet metal enclosure for DB’s (Double door type) when MCB’s to be used, single pole and neutral, 8 ways with 200 ampere rated bus bar, 240 volts fixed sunk / flush to the wall with IP-43 and IK-09 protection complete all as specified and directed. Legrand/Siemens/Schneider

S & F in repair MCB single pole, 240 volts, 6 to 32 Ampere, rupturing capacity 10 KA, ‘C’ curve type complete all as specified and directed.

S & F MCB single pole, and neutral 240 volts, 6 to 32 Ampere, rupturing capacity 10 KA, ‘C’ curve type complete all as specified and directed.

S&F MCCB DB TPN 4 way,made out of CRCA sheet incl fixing incl fixing in walls cutting chases grouting and necessary patch work and white wash to match the existing of MCCB 4 POLE 100 16 KA breaking capacity with thermal release 01 nos and bus bar 300 amp rated made out of AL insulated with adhesive tape RYBBLACK 04 NOS

M & L for earthing complete with galvanised earth plate electrode 600 X 600 X 6 mm thick buried directly in ground (earth pit not less than 2.25 m below ground level) with top edge of earth plate not less than 1.5 m below normal ground level, connected to galvanised earth lead wire 4 mm dia by means of nuts, bolts, check nuts & washers of galvanised iron or steel all as shown on electrical plate No. 3 of MES schedule 2009, Part – I (Specifications) and connected to main switch board / main DB’s / earthing test point including all necessary excavation and earth work in any type of soil, adequate quantity of charcoal dust & common salt all around the earth plate minimum 150 mm in all directions with & including watering pipe 20 mm dia GI medium grade, GI funnel made out of 0.63 mm thick GI sheet, wire gauge, 50 mm thick RCC cover in PCC 1:2:4, type B-1, duly reinforced with 6 mm dia mild steel round bars @ 150 mm both ways center to center with suitable lifting handle to cover, earth pit of PCC 1:3:6 type C-1, GI protection pipe light grade 15 mm bore up to 7.5 m length from earth electrode & engraving of earth marking on nearby building with CM 1:4 plate size 200 X 150 X 15 mm & painting of earth result etc. including testing on complete all as specified and directed.

GORAYA AND CO

M/S MALKIAT SINGH AND SONS

RATTAN CHAND CHANDAN AND CO

buta singh and sons

JOGRAJ CONSTRUCTION COMPANY

S S CONSTRUCTION

P S BUILDERS

Harbhajan electric co

M/s SODHI SALES CORPORATION