COMPREHENSIVE MAINTENANCE OF ALL TYPE OF B/R BUILDINGSRELATED WORKS OF OTM /MD ACCN OF CQA (ICV) AT AREA UNDER GE GOLCONDA

Amount

Demolition floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.

Demolition of cement concrete (Un-reinforced) in ground floors and pavings n exc. 15cm thick.(Below or above ground level) complete all as specified and directed.

M&L for 75mm thick Plain cement concrete (1:4:8) type D2 (40mm graded stone aggregate) as in sub base, rough finished surface complete all as specified and directed.

M&L for 40 mm thick plain cement concrete (1:2:4) type B1 (20mm graded stone aggregate) finished the surface even and smooth without using extra cement, complete all as specified and directed.

M&L for Plain cement concrete C-2 type 1:3:6 (40mm graded aggregate) 75mm thick as in plinth protection complete all as specified and directed.

M&L for non skid coloured ceramic tiles 7 to 8mm thick (square or rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc., laid over and including cement screed bed or bedding layer in CM (1:6), 15mm thick and tiles jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, compelte all as specified and directed.

M&L for non skid coloured ceramic tiles 7 to 8mm thick (square or rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc, laid over and incudling screed bed or bedding layer in CM (1:6), 15mm thick and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles complete all as specified and directed.

M & L for glazed ceramic tiles in vetical surfaces of size 300mmx200mmx7mm thick laid over 10mm thick back coat in CM (1:4), set and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tiles, complete all as specified and directed.

M&L for 25mm thick cement concrete (1:2:4) type B0 (12.5mm graded stone aggregate) as in sub-base and finished surface even and smooth without using extra cement, complete all as specified and directed.

M&L Vitrified Ceramic tiles, light shade, 10mm thick (Square or rectangular) polished, area of each tile not exc 0.36 Sqm in floors etc., and laid over and including cement screed bed or bedding layout in CM (1:6), 15mm thick and jointed in neat slurry and pointed in white or coloured cement to match using light shade coloured tiles complete, all as specified and directed.

M&L Vitrified Ceramic tiles 10mm thick (Square or rectangular) polished, area of each tile not exc 0.36 Sqm in skirting / dados etc and including 10mm thick rendering in CM(1:4) baking coat and jointed in neat slurry and pointed in white or coloured cement to match using light shade coloured tiles complete, all as specified and directed.

Taking down cement plaster any description on brick or stone walls, roof plaster etc including raking out joints,hacking for key, scrubbing down with water, complete all as specified and directed.

M&L for 10mm thick in CM 1:6 rendering on brick or concrete surfaces finished even and smooth (without using extra cement), complete all as specified and directed.

M & L for rendering 15mm thick in cement mortor 1:4 on Brick wall surfaces, finished even and smooth without using extra cement with @ at 3% IWPC (IWPC measured separately) complete all as specified and directed.

M&L for Rendering 5mm thick in CM (1:3) as in ceilings concrete surfaces finished even and smooth (without using extra cement), complete all as specified and directed.

Supply only integral water proofing compound, complete all as specified and directed.

M&L for Preparation of wall surfaces and apply three coats of white wash, complete all as specified and directed.

M&L Preparing newly plastered wall surfaces and apply two coats of oil boud distemper emulsion over a coat of primer, complete and all as specified and directed.

M & L preparation of new surfaces of walls plastered or unplastered etc and applying two coat of cement based paint paint on wall surfaces as specified and directed.

M&L for preparation of ceiling surfaces and apply three coat of white wash, complete all as specified and directed.

Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc., complete all as specified and directed.

M & L for brick work with sub-class `B' bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar (1:6), complete all as specified and directed.

M & L Brick work, half brick thick with sub-class 'B' bricks old size straight or curved on plan to any radius built in cement mortar (1:4), complete all as specified and directed.

S & F in repairs, vitreous china Squatting pan Orissa pattern of size 580mx440mm with integral foot rests (excluding flushing cistern and flush pipe) complete including concrete bedding complete, all as specified and directed.

S&F in repairs wash down water closet (pedestal pattern) complete white with plastic water closet seat black closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device and flush pipe of polythelene of low or density or PVC 32mm dia for low level flushing cistern complete

S & F in repairs, plastic water closet seat & cover for pedestal pan , closed pattern with flat bottom & cover and mild steel chromium plated or aluminised hinging device, complete all as specified and directed.

S&F in repair Kitchen sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm including necessary PVC outlet pipe and coupling complete , all as specified and directed.

S & F in repair stainless steel plate rack 31" X 36" X 10" made up of 1mm thick sheet (Non magnetic) complete all as specified and directed by Engineer-In-Charge.

S & F in repair 15mm bore Bib taps, chromium plated cast copper alloy but fancy type, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repairs 15 mm dia fancy type stop valves/ angle cock chromium plated screwed down, high pressure, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F in repairs stop cock 15mm dia standard of PTMT any colour high pressure screwed for iron pipe and fixed.(Minimum weight 15mm-90gms) all as specified and directed.

S&F in repairs concealed stop cock but fancy type 15mm dia, chromium plated with long shank and cup (concealed type) all as specified and directed.

S&F in repairs 15mm bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed.(Minimum weight 15mm-90gms) all as specified and directed.

S & F in repair 15mm bore dia. pillar taps (fancy type), cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete.

S&F in repair bib cock/tap 15 mm chromium plated long body complete (but fancy type) or as specified and directed.

S & F in repair 125mm size brass chromium plated shower rose with or without swivel joints including fixing to steel pipe or union fixed complete all as specified and directed.

S & F in repair tubular towel rail 20 mm dia ‘D’ type 60 cm long between flanges of brass chromium plated complete all as specified and directed.

S&F Steel water tubing, 15mm bore, medium graded, galvanised with all fitings and fixed to wall, celing or laying in trenches including taking up and down complete all as specified and directed.

S&F Steel water tubing 20mm bore, medium graded, galvanised with all fitings and fixed to wall, celing or laying in trenches including taking up and down complete all as specified and directed.

S&F Steel water tubing 25mm bore, medium graded, galvanised with all fitings and fixed to wall, celing or laying in trenches including taking up and down complete all as specified and directed.

S&F in repair vitreous china wash basin, white, flat back size 550 x 400mm , 01 No. chramium plated piller tap, 01 Nos 32mm waste coupling and pipe, one pair of MS bracket, cutting for and pinning in ends of brackets or erecting stand complete, all as specified and directed.

S & F in repair vitreous china bowl urinal flat back size of 465 x 355 x 265mm white (minimum) with grating and union for discharge pipe (excluding flushing cistern & flush pipe) but exncluding waste pipe, complete including providing & fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with screws, pointing around urinal back in cement complete all as specified and directed.

S & F in repair PVC valveless syphonic action type low level flushing cistern 10 Ltr capacity with inlet, ball valve, float and handle incl brackets and flush pipe of polyethylene of low or high density or PVC. 32 mm dia all as specified and directed

S & F PVC connections 15 mm size with PTMT nuts of length 600 mm, complete all as specified and directed.

S&F in repair PVC waste pipe of size 32mm as in urinal pot / WHB/sink including all fitting of approved make complete all as specified and directed.

S & F in repairs health faucet with spray jet (hand shower) chromium plated incl all fitting & fixtures complete all as specified

S & F in repairs 15mm bore brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified

S&F in repair two way bib cock/tap 15 mm chromium plated complete fancy type of branded as specified and directed.

S&F in repairs of MS curtain rod 25mm decorated type, powder coated fixed complete all as specified and directed

S&F in repairs mild steel brackets for curtain rod 25mm dia , decorative type powder coated complete all as specified and directed

S&F in repair PVC ball valve 20 mm dia high pressure of PTMT with epoxy coated aluminium rod and high density plasic ball screwed for iron pipe and fixed . (minimum weight 20 mm- 210 gms ) complete all as specified and directed.

S&F in repair 20mm bore dia Gun metal Gate valve with iron wheel head screwed both ends for iron pipe or for union, complete all as specified and directed.

S&F in repair 25mm bore dia Gun metal Gate valve with iron wheel head screwed both ends for iron pipe or for union, complete all as specified and directed.

Disconnecting existing tanks of capacity exc 250 ltr & n exc 500 ltr, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately),etc complete all as specified and directed.

Disconnecting existing tanks of capacity exc 500 ltr & n exc 1000 ltr, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately),etc complete all as specified and directed.

S&F 500 Ltr capacity rotaional moulded polyethylene water storage tanks double layer cylindrical vertical with closed top hoisted and fixed in position including dismantling & removing to store complete all as specified and directed

S&F 1000 Ltr capacity rotaional moulded polyethylene water storage tanks double layer cylindrical vertical with closed top hoisted and fixed in position all as specified including dismantling & removing to store complete all as specified and directed

S&F in repair Cover/ lid for PVC water tank of any capacity complete all as specified and directed

Cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes etc capcity of tank exc 250 & n exc 500 ltrs, complete all as specified and directed.

Cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes etc capcity of tank exc 500 & n exc 1000 ltrs, complete all as specified and directed.

Cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes etc capcity of tank exc 1000 & n exc 2000 ltrs, complete all as specified and directed.

S&F in repairs 100mm long butt hinges medium weight cold rolled mild steel and fixed in complete all as specified and directed.

S & F in repairs 150mm mild steel pressed handles, oval type, stove enamelled black, complete all as specified and directed.

S&F in repairs 150mm long Mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed complete, complete all as specified and directed.

S&F in repair 175mm ordinary rat tail rod pattern springs mild steel, incl roller and roller plate complete all as specified and directed.

S &F in repair 125mm floor door stopper of Aluminium alloy, body and tongue and anodised, with hard drawn steel spring and complete all as specefied

S & F in repairs 300 mm size mild steel sliding door bolts plate type, stove enamelled, black with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed.

S&F in repairs, stainless steel wire cloth 0.36 mm nominal dia of wire & average width of aperture 1.40mm and fixed with wooden beading, and tinned tack or galvanised wire staples or necessary nut & bolt etc., complete all as specified and directed.

Hacking out old broken glass (any thickness, size quality or description) from wooden, steel or stone, concrete or brick sorrounds, glazed with putty or fixed with beads, complete all as specified and directed.

S & F for 3 mm thick Sheet glass, ordinary quality and glazing with oil putty or wooden beading etc in squares not exceeding 0.5 Sq. M in each pane complete all as specified and directed.

Taking down Chowkats or frames not exceeding 1.5 Sq. M each (Without taking off shutters from the frames) complete all as specified and directed.

S&F of steel ventilators with top hung duoble shutter glazed and gauzed, bottom half fixed type including hinges, steel peg stay complete all as specified and directed.

S&F 4mm thick figured glass, pin head type and glazing with wooden beads or oil putty in square not exc. 0.50 Sqm in each pane complete all as specified and directed.

S&F in stainless steel wire cloth 0.36 mm nominal dia of wire & average width of aperture 1.40mm and fixed with wooden beading and tinned tack or galvanised wire staples complete all as specified and directed

M & L for preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer, complete all as specified and directed.

Dismantling ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets all as specified and directed

Providing & fixing false ceiling at all heights with semi perforated 12mm thick micro tegular edged GRG ( Glass Fiber reinforced Gypsum) false ceilingtiles of Size 595 x 595 mm of approved texture, degine and pattrens having moisture content less than 2%, humidity resistence of 99% NRCO 50 to 75 as per IS 8225:1987, Noncombustable as per BS 476 (Part 4)-1970 and height refelectence of 85% (minimum) to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanized iron section of 033 mm thick( galvanized)at the rate of 120 grames per sqm including both sides)compraing of maint runners of size 15 x 32 mm of lenth 3000 mm, cross-T of size 15 x 32 mm of length 1200mm and secondary intermeditate cross-T of 15 x 32 mm of length 600mm to from grid module of of length 600 x 600mm, suspended from ceiling using galvanized mild steel items ( glavanizing @ 80 grams per sqm) i.e 50 mm long, 8mm outer diameter M-6 dash fasterners, 6mm dia fully threaded hanger rod upto 1000mm length and L-shape level adjuster of size 85 x25x2mm Galvanized iron perimeter wall angle of size 24x24x0.40mm og length 3000mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 45 mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawinig and as per directions

S&F grating doom 100 mm dia of PTMT (Minimum weight 25 gms) in repairs, complete all as specified and directed.

S & F PVC( SWR ) pipes 110mm dia single socketed , in any lenth with rubber ring joints as rainwater, soil waste and vent pipe (with all fittings) fixed to wall or laid in trenches incl taking down complete all as specified and directed.

S & F PVC( SWR ) pipes 75mm dia single socketed , in any lenth with rubber ring joints as rainwater, soil waste and vent pipe (with all fittings) fixed to wall or laid in trenches incl taking down complete all as specified and directed.

S&F in repairs PVC (SWR) floor trap 75mm dia outlet, plain with grating including jointing with solvent cement complete all as specified and directed.

S&F PVC (SWR) branch piece single (single Y) equal or unequal with access door of bore 110mm, complete all as specified and directed.

S&F PVC (SWR) branch piece single (single Y) equal or unequal with access door of bore 75mm, complete all as specified and directed.

S&F PVC (SWR) junction single (single T) equal or unequal with access door of bore 110mm, complete all as specified and directed.

S&F PVC (SWR) junction single (single T) equal or unequal with access door of bore 75mm, complete all as specified and directed.

S&F PVC (SWR) bends any radius 110mm bore in repairs, complete all as specified and directed.

S&F PVC (SWR) bends any radius 75mm bore in repairs, complete all as specified and directed.

S&F PVC(SWR) vent cowl 110mm bore, complete all as specified and directed.

S&F in repairs 15mm dia Swan neck long body CP pillar tap cast copper alloy with capstan heads screwed down high pressure with or without lettered ‘HOT’ or ‘COLD’ with long screwed shanks and fly nuts screwed for iron pipe, complete all as specified and directed.

M&L 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including dismantling of existing stone slabs laid, bedded and pointed in any mortar complete all as specified and directed.

M&L for Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations

Taking down shutters of any discription not exc 1 sq. m each and re-fixing in same opening.

Resecuring or easing and adjusting without taking down.Shutters of any description exc 1 sq. m and n. exc 2 sq. m each.

Dismantiling of AC sheets / Galvolume sheet / GI sheet Corrugated or Semi corrugated etc in roof coverings.

M &L 6 mm thick Asbestos Cement sheet corrugated or semi corrugated in roofs, walls etc and fixed with J or L hook or cranked bolts with washers etc. complete all as specified and directed.

M & L for asbestos cement two pieces adjustable serrated ridge for corrugated and semi corrugated sheet 6mm thick fixed with J or L hook and cranked bolts woth washers etc. complete all as specified and directed.

M & L pre-painted galvalume aluminium zinc coating GI based corrugated sheet 0.45mm to 0.50 mm thick of any colour having tensile strength 550 mpa as in roof covering/ cladding to wall, fixed with self tapping screws all as specified and directed. Note: Rate quoted deemed to include cost of making good disturbed masonry surface to match with existing etc using PCC 1:2:4/brick work/cement mortar 1:4 complete all as specified and directed.

M&L pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof overing/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not other wise provided for.

S & F for MS framed structure roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats of Grade Fe 410 -W (Gde- E- 250) quality- A etc. complete all as specified and directed.

M & L for preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer.

Taking down existing felt, plaster and preparing the surface of roof by cleaning of foreign materials down with water complete all as specified and directed.

M & L for roughening surfaces of old concrete floor or concrete surfaces by picking, sweeping clean and washing down with water to remove dust, etc.and brushing neat cement slurry with 3 Kg., of cement per square metre complete all as specified and directed.

M&L for providing cement concrete type B0 1:2:4 (12.5mm graded stone aggregate) as in padding and benching & filletting with IWPC (IWPC measured and paid seperately) complete all as specified and directed.

M&L screed bed or bedding layer 10 mm thick CM 1:4 for laying floor finishes finished even and smooth without using extra cement with IWPC (IWPC measured separately) as in roof slabs complete all as specified and directed.

M & L for APP based polymeric membrane minimum weighing 3Kg/Sqm and minimum 3 mm thick reinforced with polyster non wove fabric (weight not less than 150 gms/sqm) laid over primed surface including bituminous primer conforming to IS-3384 applied @ 0.3 ltrs/sqm by forced application and applying one coat bitumen grade 85/25 @ 1.2 Kg/Sqm over finished with one coat of aluminium paint @ 100 ml/sqm, 10 cm overlap fused uniformly by LPG torch flame, all as specified and directed” Note :-1) Rate included taking down and refixing of earth strips or any other in the same position 2) WPC & padding concrete shall be measured and paid separately. complete all as specified and directed.

Taking down Chowkats or frames not exceeding 1.5 Sq. M each (Without taking off shutters from the frames) complete all as specified and directed, complete all as specified and directed.

Taking down shutters of any description exc 1.00 Sqm and n exc 2 Sqm each complete all as specified and directed.

Taking down shutters of any description n exc 1.00 sqm complete all as specified and directed.

S&F of solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, suppling and fixing in opening as per specification and drawing, complete all as specified and directed.

S&F of factory made solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of M.S tubes for top and bottom rails. M.S frame shall be covered with heat moulded plain colour PVC 'C' channel moulded plain colour PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail; Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying and fixing in the frame at site as per specification and drawing, complete all as specified and directed.

S & F 35 mm thick FACTORY MADE plain, framed, panelled shutters ( two panels), with lock rail and panels of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (part-I), kiln seasoned and chemically pressure treated supplied and fitted to chowkats.

S&F 35 mm thick 2nd class hard wood gauzed and skeleton shutters for doors open rebated and prepared to receive glass, gauge etc., divided into square with plain chamfered or rounded mitered and rebated sash bars, any number, edges of framing, plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, size of members of shutters all as specified in SSR Part-I Section 8 clause 8.20 (a) complete all as specified and as directed.

S&F for 100 mm long aluminium butt hinges fixed to PVC door shutter, complete all as specified and directed.

S&F of 100 mm long butt hinges medium weight cold rolled mild steel and fixed in complete all as specified and directed.

S&F for 125mm long aluminium anodised barrel tower bolt of exturded section, complete all as specified and directed.

S & F for 125 mm long extruded aluminium alloy handles, fabricated type, anodised, complete all as specified and directed.

S & F for 300 mm size mild steel sliding door bolts plate type, stove enamelled, black with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete, complete all as specified and directed.

M & L for preparation of new or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) over a coat of Pink primer, complete all as specified and directed.

S&F in stainless steel wire cloth 0.36 mm nominal dia of wire & average width of aperture 1.40mm and fixed with wooden beading and tinned tack or galvanised wire staples complete all as specified and directed.

Dismantling boarding, any description, fixed in any position with nails, complete all as specified and directed.

M & L for 18 mm thick, Plywood, grade BWR, type BB, fixed with screws to timber frame work,for cub board, kitchen cub board and shelves and other uses etc in repairs incl side wooden beading completed all as specified, complete all as specified and directed.

M & L for 0.9 mm thick, Decorative laminated type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions, etc completed all as specified, complete all as specified and directed.

S & F Continuous (piano) hinges,mild steel, bright finish or electro galvanised, Width of flaps (when open) in 30 mm etc complete all as specified and directed.

S & F for Extruded aluminium alloy handles, fabricated type,anodised, Size of handle in 75 mm,etc complete all as specified and directed.

S & F brass 2-levers locks for cupboard, grade I of size 50mm complete all as specified.

S & F 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished and brass polished complete all as specified and directed.

M & L preparation of old decorated surfaces of walls plastered or unplastered including removing by brooming down all dust, dirt and all loose scales by steel wire brushing, scrapping down smoke, soots, moulds, moss and efflorescent salts and trading oil and greasy spots etc and applying one coat of Oil bound distemper (washable) white or tinted to walls, white or tinted comlpete all as specified and directed.

M & L preparation of old decorated surfaces of ceiling plastered or unplastered including removing by brooming down all dust, dirt and all loose scales by steel wire brushing, scrapping down smoke, soots, moulds, moss and efflorescent salts and trading oil and greasy spots etc and applying one coat of Oil bound distemper (washable) white or tinted on ceiling, white or tinted comlpete all as specified and directed.

Complete removal of existing treatment to wall and applying 3 mm thick Birla wall care putty including prepration of old surface complete and applying two coats of Oil bound distemper on wall surface over a coat of chalk whiting primer all as specified and directed

M & L preparation of old decorated surfaces of walls plastered or unplastered including removing by brooming down all dust, dirt and all loose scales by steel wire brushing, scrapping down smoke, soots, moulds, moss and efflorescent salts and trading oil and greasy spots etc and applying one coat of white wash to walls comlpete all as specified and directed

All as per item No.133 above but on ceiling comlpete all as specified and directed

M & L preparation of old decorated surfaces of walls plastered or unplastered by brooming down or steel wire brushing, scrapping down smoke soots, moulds ,moss and efflorecent salts and treading oil and greasy spots etc and applying one coat of cement based paint complete all as specified.

All as per item No.135 here in before but two coats of cement based paint, complete all as specified and directed.

M&L for preparation of old painted surfaces of wood and wood based surfaces of any description exc 10 cm width or girth and applying one coat of synthetic enamel paint all as specified and directed

M&L for preparation of old painted surfaces of Steel and Iron work of any description exc 10 cm width or girth and applying one coat of synthetic enamel paint all as specified and directed . (White or Tinted)

SM CONSTRUCTIONS (BID ID -3373559)

SAI RAM CONSTRUCTIONS (BID ID -3365909)

VIJAY VINAYAKA INFRA (BID ID -3367962)

GNV Engg Services (BID ID -3367234)

K K INFRA (BID ID -3367787)