IMPLEMENTATION OF MSCL PROJECT NETWORK, STRENGTHENING, CAPACITY ENHANCEMENT, IMPLEMENTATION OF SCADA FOR POWER SUPPLY UNDER SMART CITY MISSION (SCM) IN MORADABAD CITY.

Supplying and laying of 33 kV, 3CX 300 Sq.mm, XLPE, armoured Cable Undergrounding work for existing overhead 1 ckt 33 kV line (with spare cable) by using Horizontal Directional Drilling Technique (85% of Total Length)

33 KV Polymer Disc Insulator B&S type 70 KN

33 KV Disc Fitting B&S type 70 KN

33 KV Composite Polymer Pin Insulator with Nut and washers

33kV MS Danger board with clamp and N&B

33kV MS Number plate with clamp and N&B

33 KV Stay Set (G.I stray Rod 20*2100mm,stay wire 7/8 wire SWG ,stay clamp bolt ,nut & washer with concerte ) As Per TS

P.G. Clamp for ACSR Dog/Raccoon

13 Mtr. Lattice tower (unGalvanised)

Foundation of Lattice structure including excavation, base padding, Pillar, Grouting with complete accessories.

MS Earthing Rod of 20x2500 mm with 25X3 mm GI Strip

Aluminium Binding Wire - 6 SWG

HDPE Pipe 160 mm for cable riser

33kV 'E' Bracket with N&B

GI Top Channel 125x65mm, 3200 mm with clamp, bolts, nuts and washers

33 KV Line Isolator

33kV 3x300 mm2 XLPE Cable

Heat Shrinkable outdoor type termination kit suitable for 33kV XLPE 3x300 Sq. mm. cable size

Straight through Joint kit suitable for H.T XLPE Cable of size 300 Sq.mm/3C for 33 KV

HDPE Pipe for Cable laying (Pipe to be laid by HDD Method) (For Road Crossing)

Laying of 3x300 sq. mm. 33 KV XLPE Insulated Cable underground in HDPE Pipe with trenches ( For Road Crossing)

Drilling & Laying of HT Underground Cable using HDD method without using HDPE Pipe

Mounting of cable on DP structure(including loop and riser)

Cable Route Marker

Dismantling of Old damaged HT Poles and transportation up to store

Dismantling of existing overhead line and transportation of materials to nearest PVVNL Store.

Supplying and laying of 11kV, 3CX 185 Sq.mm,XLPE, armoured Cable Undergrounding work for existing overhead 1 ckt 11 kV line (with spare cable)

11kV 3x185 mm2 XLPE Cable

Heat Shrinkable outdoor type termination kit suitable for 11kV XLPE 3x185 Sq.mm. cable size

Straight through Joint boxes suitable for H.T XLPE Cable of size 300 Sq.mm/3C for 11 KV

Drilling & Laying of HT Underground Cable using HDD method without using HDPE Pipe

HDPE Pipe for Cable laying (Pipe to be laid by HDD Method) (For Road Crossing)

Mounting of cable on DP structure (including loop and riser)

Laying of 3x185 sq. mm. 11 KV XLPE Insulated Cable underground in HDPE Pipe/ trenches/Riser

Cable Route Marker

HDPE Pipe 160 mm for cable riser

11 Mtr. Lattice tower (UnGalvanised)

GI Top Channel 125x65mm, 3200 mm with clamp, bolts, nuts and washers

11 KV Polymer Disc Insulator B&S type 45 KN

Disc Fitting B&S type 45 KN

P.G. Clamp for ACSR Dog/Raccoon

11kV MS Number Plate for clamp with N&B

11kV MS Danger Board with clamp, bolts & nuts

Aluminium Binding Wire - 6 SWG

11 KV Stay Set (G.I stray Rod 16*1800 mm,Stay 7/8 SWG wire ,Stay clamp with bolt ,nut & washer with concerte ) As Per TS

MS Earthing Rod of 20x2500 mm with 25X3 mm GI Strip

Foundation of Lattice structure including excavation, base padding, Pillar, Grouting with complete accessories.

Dismantling of Old damaged HT Poles and transportation up to store

Dismantling of existing overhead line and transportation of materials to nearest PVVNL Store.

Supplying and laying of various sizes of 1.1 KV AL LT Cable for LT cable undergrounding work, service connections to existing/new consumers with all accessories.

1.1 kV PVC Cable of 1 CX300 Sq.mm from transformer LT bushing to LT Feeder Pillar Box

Supply of 1.1 kV Armoured XLPE Cable of 3.5 CX150 Sq.mm from LT main pillar box to consumer distribution boxes

Laying of under ground 3.5 CX150 Sq.mm LT XLPE cable including excavation of 30cmx120cm.deep trench in pacca road and refilling by 25 cm thick layer of sand 'A' class bricks covering refiling soil in the remaining portion.

Drilling & Laying of 3.5 CX150 Sq.mm Underground Cable using HDD method without using HDPE Pipe

Supply of XLPE Armoured Cable of 2CX6 Sq.mm from consumer distribution boxes to consumer end (Service Line) (for existing LT system to be converted to underground).

Laying of under ground 2CX6 Sq.mmLT XLPE cable including excavation of 30cmx120cm.deep trench in pacca road and refilling by 25 cm thick layer of sand 'A' class bricks covering refiling soil in the remaining portion.

Supply of XLPE Armoured Cable of 4CX10 Sq.mm from consumer distribution boxes to consumer end (Service Line) from Imperial tiraha to Budh Bazar chauraha (for existing LT system to be converted to underground).

Laying of under ground 4CX10 Sq.mm LT XLPE cable including excavation of 30cmx120cm.deep trench in pacca road and refilling by 25 cm thick layer of sand 'A' class bricks covering refiling soil in the remaining portion.

Laying of XLPE Armoured cable with PVC Pipe for consumer connection

AL Lugs for incoming and outgoing cables of vaious sizes

PVC pipe for consumer connection with all acessories for cable laying & dressing

Road Crossing by HDPE Pipe 160 mm, 6 meter,using HDD method

Replacement of existing LT bare lines and damaged AB cable by new AB cable (3x120+ 1x95 + 1x16) with all accessories including for strengthning works .

9 Mtr S.T.P - 410 SP-33 for LT with all fitting material and accessories & Concreting of Pole/Support (0.44 cu.M.),

MS Earthing Rod of 20x2500 mm,GI Wire 6 SWG

LT Stay Set (G.I stray Rod 16*1800mm,stay wire 7/10 wire SWG10 ,stay clamp bolt ,nut & washer with concerte ) As Per TS

Dead End clamps with I-Hook (Insulated)

Suspension Clamp with I-Hook (Insulated)

LT Insulation Piercing Connectors of 95/50 sq. mm - 70/35 sq. mm (For messenger wire jumpering & energizing DB neutral)

Pole clamps with nut and bolt

Holding clamp for round pole with nut and bolt

LT Insulation Piercing Connectors of 120-50 sq. mm -50-35 sq. mm size for energizing distribution kiosk/box

LT Insulation Piercing connectors (16 sq. mm -16 sq. mm) suitable for street light connection

Three Phase SMC Distribution Box with clamps

LT ABC of 3x120+1x70+1x16 sq. mm

1x35 mm2 XLPE insulated AL. cable for energising the distribution boxes/kiosks.

End cap for LT AB cable

PG Clamps for Messenger Wire

Dismantling of existing overhead line and transportation of materials to nearest PVVNL Store.

Dismantling of Old damaged Poles and transportation up to store

Replacement of existing Overhead 33 KV old/damaged Dog conductor with New 33 KV Dog Conductor with fittings and all accessories

ACSR Dog Conductor

13 Mtr. STP with Concreting of Pole/Support (0.44 cu.M.)

MS Earthing Rod of 20x2500 mm

GI Wire 6 SWG

33 KV Composite Polymer Pin Insulator with Nut and washers

Aluminium Paint

Red Oxide Paint

33kV MS Danger board with clamp and N&B

33kV MS Number plate with clamp and N&B

G.I. Barbed Wire

33 KV Polymer Disc Insulator B&S type 70 KN

Disc Fitting B&S type 70 KN

33 KV Stay Set (G.I stray Rod 20*2100mm,stay wire 7/8 SWG wire ,Guy Insulator,stay clamp bolt ,nut & washer with concerte ) As Per TS

Dismantling of existing overhead line and transportation of materials to nearest PVVNL Store.

Dismantling of Old damaged Poles and transportation up to store

Replacement of existing Overhead 11 KV old/damaged Dog conductor with New 11 KV Dog Conductor with fittings and accessories .

ACSR Dog Conductor

11 KV Polymer Disc Insulator B&S type 45 KN

Disc Fitting B&S type 45 KN

11 KV Composite Polymer Pin Insulator with Nut and washers

11kV MS Danger Board with clamp, bolts & nuts

11kV MS Number Plate for clamp with N&B

11 KV Stay Set (G.I stray Rod 16*1800 mm,Stay 7/8 SWG wire ,Guy Insulator, Stay clamp with bolt ,nut & washer with concerte ) As Per TS

P.G. Clamp for ACSR Dog/Raccoon

Armour Rod with Ferrule for ACSR Dog/Panther/Raccoon Helical performed

11 Mtr. STP -410 SP 55 As per TS

Concreting of Pole/Support (0.44 cu.M.)

MS Earthing Rod of 20x2500 mm

Aluminium Binding Wire - 6 SWG

Aluminium Jointing Sleeves

G.I. Barbed Wire

GI Wire 6 SWG

GI Wire 8 SWG

GI Wire 16 SWG

Eye Bolt

Turn Buckle

Red Oxide Paint

Aluminium Paint

11kV `F' Bracket with N&B

Cross arm holding Clamp with nuts & bolts

V-Type Cross arm for 11KV Line, 100x50x6 mm, GI

Guarding angle 75x75x6 mm, 2200 mm long with holding clamp, packing piece, nut & bolts etc.

Dismantling of Old damaged HT Poles and transportation up to store

Dismantling of existing overhead line and transportation of materials to nearest PVVNL Store.

Existing Transformer Strengthening Works

Replacement of Old/damaged Feeder Pillar box

1.1 kV PVC unarmoured Cable of 1 CX300 Sq.mm from transformer LT bushing to LT Feeder Pillar Box

1.1 kV PVC armoured Cable of 3.5CX150 q.mm for LT distribution Box

Earthing of Transformer by MS earthing rod of 20x25000 mm. and 6 SWG earthing wire etc.

11kV TPMO complete set

11kV DO Fuse Set (3 Phase)

11kV Lightening Arrestor

G.I. Barbed Wire

11kV MS Danger Board with clamp, bolts & nuts

11 KV Stay Set (G.I stray Rod 16*1800 mm,Stay 7/8 SWG wire ,Stay clamp with bolt ,nut & washer with concerte ) As Per TS

Red Oxide Paint

Aluminium Paint

Al. Crimping lugs

Renovation of Damaged Plinth & fencing of Transformers

Repair of damaged plinth of Transformers

Fencing work of existing Transformers with best available solutions

Replacement of old/damaged 11 mtr, long GI Steel Single Tubular Pole with all fitting material and accessories

Polymer Disc Insulator B&S type 45 KN

Disc Fitting B&S type 45 KN

Composite Polymer Pin Insulator with Nut and washers

MS Danger Board with clamp, bolts & nuts

MS Number Plate for clamp with N&B

11 KV Stay Set (G.I stray Rod 16*1800 mm,Stay 7/8 SWG wire ,Guy Insulator ,Stay clamp with bolt ,nut & washer with concerte ) As Per TS

11 Mtr. STP -410 SP 55 As per TS

Concreting of Pole/Support (0.44 cu.M.)

MS Earthing Rod of 20x2500 mm

G.I. Barbed Wire

GI Wire 6 SWG

Red Oxide Paint

Aluminium Paint

F' Bracket with N&B

Cross arm holding Clamp with nuts & bolts

V-Type Cross arm for 11KV Line, 100x50x6 mm, GI

Dismantling of Old damaged HT Poles and transportation up to store

Replacement of old/damaged 11 mtr, long GI Steel Double Tubular Pole by U/G Lattice Structure/Steel Double Tubular Pole 11 meter Long with all fitting material and accessories

11 Mtr. Lattice tower (UnGalvanised)

11 Mtr. STP -410 SP 55 As per TS.

Polymer Disc Insulator B&S type 45 KN

Disc Fitting B&S type 45 KN

Composite Polymer Pin Insulator with Nut and washers

11 kV MS Danger Board with clamp, bolts & nuts

MS Number Plate for clamp with N&B

11 KV Stay Set (G.I stray Rod 16*1800 mm,Stay 7/8 SWG wire ,Guy Insulator,Stay clamp with bolt ,nut & washer with concerte ) As Per TS

Concreting of Pole/Support (0.44 cu.M.)

MS Earthing Rod of 20x2500 mm

G.I. Barbed Wire

GI Wire 6 SWG

Red Oxide Paint

Aluminium Paint

`F' Bracket with N&B

Cross arm holding Clamp with nuts & bolts

V-Type Cross arm for Line, 100x50x6 mm, GI

GI Top Channel 125x65mm, 3200 mm with clamp, bolts, nuts and washers

MS Earthing Rod of 20x2500 mm with 25X3 mm GI Strip

Dismantling of Old damaged HT Poles and transportation up to store

Foundation of Lattice structure including excavation, base padding, Pillar, Grouting with complete accessories.

Replacement of old/damaged 9 mtr for LT Pole, long GI Steel Single Tubular Pole with all fitting material and accessories

9 mtr STP 410-SP 33 LT Pole

LT clamp with nut bolt

LT shackle insulator with nut bolt

Concreting of pole

Suspension clamp with nut bolt

MS Earthing Rod of 20x2500 mm with 6 Swg GI wire

Stay set with complete acessories

Dead end clamp with nut bolt

LTDB box with clamp

LT piercing connectors

Pole clamp with Nut bolt

Red Oxide Paint

Aluminium Paint

1x35 mm2 XLPE insulated AL. cable for energising the distribution boxes/kiosks.

Dismantling of Old damaged HT Poles and transportation up to store

Replacement of old/damaged 13 mtr, long GI Steel Single Tubular Pole with all fitting material and accessories

Polymer Disc Insulator B&S type 70 KN

Disc Fitting B&S type 70 KN

Composite Polymer Pin Insulator with Nut and washers

MS Danger Board with clamp, bolts & nuts

MS Number Plate for clamp with N&B

33 KV Stay Set Set (G.I stray Rod 20*2100mm,stay wire 7/10 wire SWG ,Guy Insulator, stay clamp bolt ,nut & washer with concerte ) As Per TS

13 Mtr. STP 410 SP-72

Concreting of Pole/Support (0.44 cu.M.)

MS Earthing Rod of 20x2500 mm

G.I. Barbed Wire

GI Wire 6 SWG

Red Oxide Paint

Aluminium Paint

F' Bracket with N&B

Cross arm holding Clamp with nuts & bolts

V-Type Cross arm for Line, 100x50x6 mm, GI

Dismantling of Old damaged HT Poles and transportation up to store

Replacement of old/damaged 13 mtr, long GI Steel Double Tubular Pole with all fitting material and accessories

13 m Lattice tower (un Galvanised)

Polymer Disc Insulator B&S type 70 KN

Disc Fitting B&S type 70 KN

Composite Polymer Pin Insulator with Nut and washers

MS Danger Board with clamp, bolts & nuts

MS Number Plate for clamp with N&B

33 KV Stay Set Set (G.I stray Rod 20*2100mm,stay wire 7/10 wire SWG,Guy Insulator ,stay clamp bolt ,nut & washer with concerte ) As Per TS

13 Mtr. STP 410 SP-72

Concreting of Pole (0.64 Cu.M.)

MS Earthing Rod of 20x2500 mm

G.I. Barbed Wire

GI Wire 6 SWG

Red Oxide Paint

Aluminium Paint

'E' Bracket with N&B

GI Top Channel 125x65mm, 3200 mm with clamp, bolts, nuts and washers

GI Angle 65x65x6mm, 4300 mm long bracing with 4 clamps, bolts, nuts and washers

Foundation of Lattice structure including excavation, base padding, Pillar, Grouting with complete accessories.

Dismantling of Old damaged HT Poles and transportation up to store

SITC of LT Pillar box, Distribution boxes and fixing of existing/new 1 ph, 3ph meters (at consumer premises) for LT cable undergrounding work, service connections to existing/new consumers

LT Distribution Pillar Box 400 A

LT Distribution box 200 A (for consumer distribution )

MS Earthing Rod of 20x2500 mm with 25X3 mm GI Strip

Foundation for feeder pillar box

Installation of single phase meter with/without meter box (complete unit) at the premises of existing/new consumer with all accessories

Installation of Three phase meter with/without meter box (complete unit) at the premises of existing/new consumer with all accessories

Supplying and laying of armoured 3.5 CX150 Sq.mm, 1.1 KV XLPE Cable for Undergrounding work of LT Overhead line road crossing .

3.5Cx150 mm2 XLPE Cable

Heat Shrinkable outdoor type termination kit suitable for XLPE 3.5Cx150 Sq.mm. cable size

HDPE Pipe for Cable laying (Pipe to be laid by HDD Method) (For Railway Crossing /Road Crossing)

Mounting of cable on Pole (including loop and riser)

Laying of armoured 3.5Cx150 sq. mm. 1.1 KV XLPE Cable underground in HDPE Pipe/ trenches/Riser

Cable Route Marker

MS Earthing Rod of 20x2500 mm with 25X3 mm GI Strip

SITC of Oil Type Transformer with Plinth and all fitting & accessories

11/0.40 kV 400KVA Transformer as Per TS

11/0.40kV 250 KVA Transformer As Per TS

ST Pole 11 Mtr. IS 410 SP-55

Stone Pad (300x300x75mm)

Concreting of Supports with Plinth (0.44 Cu.M. each)

M.S. Top Channel 125x65 mm, 2240 mm (10.7kg/mt) with clamp, bolts, nuts and washers

Copper L-Piece of size 400x50x6 mm for LT Bushing Rod of Transformer

LT Aluminium unarmoured XLPE Cable 1X400 Sq.mm for I/C

LT Aluminium Unarmoured XLPE Cable 1X50 Sq.mm for HT Jumpering

LT Aluminium Unarmoured XLPE Cable 1X240 Sq.mm.

11kV TPMO complete set with channel, clamps and Nuts & Bolts (As per Specification)

11kV DO Fuse Set (3 Phase)

11kV Lightening Arrestor

M.S. Channel 100x50x2028mm (Dropper for fuse set)

Holding Clamps for Top Channel TPMO & Fuse Set etc. with nuts & bolts

Plinth of T/F with RCC Top of size 2x2x1.6 Mtr. Incl. 2 nos. MS Channel

11kV Polymer Disc Insulator T&C type 45 KN

Disc Fittings T&C type 45 KN

11 KV Composite Polymer Pin Insulator with Nut and washers

G.I. Barbed Wire

11kV MS Danger Board with clamp, bolts & nuts

11kV/ LT Stay set complete (As per Annexure-9)

Earthing of Pole by MS Earthing Rod of 20x2500 mm. and 6 SWG earthing wire etc.

SMC LT Distribution Box with 4-Pole MCCB for DTR

Al. Crimping lugs 400 sq.mm.

Al. Crimping lugs 240 sq.mm.

Al. Crimping lugs 50 sq mm.

Aluminium Paint

Red Oxide Paint

Augmentation of 400 KVA Transformer through cable

Transformer Structure Half 4 Pole

11/0.40 kV 400KVA Transformer As Per TS

11/0.40kV 250 KVA Transformer As Per TS

Structure Foundation

SITC of 11kV RMU (2LBS+ 1VCB)

LT Distribution Pillar Box 400 A with earthing and all accessories

Supply of 11 kV Armoured XLPE Cable of 3CX185 Sq.mm from transformer to RMU unit with spare.

LT incoming Panel with metering equipment & fixing arrangement (LS)

Coppper L-Piece 50x225x10 mm (LS)

Coppper L-Piece 62x225x12 mm (LS)

LT PVC cable AI 3.5x400 Sq.mm

LT PVC cable AI 1x400 Sq.mm

LT PVC cable AI 1x240 Sq.mm

4 Core LT MCB with box (LS)

MS Danger board barbed wire including jumper

Earthing of Transformer by MS earthing rod of 20x2250 mm & 6SWG earthing wire etc.

11/0.4 kV Substation Structure Set complete with RMU, Pillar box, HT and LT Cable (without Transformer)

Transformer Structure Half 4 Pole

Structure Foundation

SITC of 11kV RMU (2LBS+ 1VCB)

LT Distribution Pillar Box 400 A with earthing and all accessories

Supply of 11 kV Armoured XLPE Cable of 3CX185 Sq.mm from transformer to RMU unit with spare.

LT incoming Panel with metering equipment & fixing arrangement (LS)

Coppper L-Piece 50x225x10 mm (LS)

Coppper L-Piece 62x225x12 mm (LS)

LT PVC cable AI 3.5x400 Sq.mm

4 Core LT MCB with box (LS)

Danger board barbed wire including jumper

Earthing of Transformer by MS earthing rod of 20x2250 mm & 6SWG earthing wire etc.

SCADA Compatiable Ring Main Unit (2 Isolators + 1 Breaker)

Ring Main Unit (2 Isolators + 1 Breaker) for 11kV feeder

Heat Shrinkable jointing kit suitable for 11 kV XLPE 3x185 Sq.mm. cable size (indoor / outdoor)

Foundation Structure for RMU for Cable Entry Etc.(Concrete 1:3:6)

Earthing of RMU by MS earthing rod of 20x2250 mm & 6SWG earthing wire etc.

SCADA Compatiable Ring Main Unit (1 Isolators)

Ring Main Unit (1 Isolators) for 11kV feeder

Heat Shrinkable jointing kit suitable for 11 kV XLPE 3x185 Sq.mm. cable size (indoor / outdoor)

Foundation Structure for RMU for Cable Entry Etc.(Concrete 1:3:6)

Earthing of RMU by MS earthing rod of 20x2250 mm & 6SWG earthing wire etc.

Supply and laying of 33 kV, 3CX 120 Sq.mm, XLPE, armoured Cable Undergrounding work from 132 kV substation at kanth road to District Court and District hospital via PTC tiraha (single circuit cable)

33 KV Polymer Disc Insulator B&S type 70 KN

Disc Fitting B&S type 70 KN

33 KV Composite Polymer Pin Insulator with Nut and washers

33kV MS Danger board with clamp and N&B

33kV SMC Number plate with clamp and N&B

33 KV Stay Set Set (G.I stray Rod 20*2100mm,stay wire 7/10 wire SWG ,Guy Insulator, stay clamp bolt ,nut & washer with concerte ) As Per TS

P.G. Clamp for ACSR Dog/Raccoon

13 Mtr. Lattice tower for Cable Riser (UnGalvanised)

Foundation of Lattice structure including excavation, base padding, Pillar, Grouting with complete accessories.

MS Earthing Rod of 20x2500 mm with 25X3 mm GI Strip

Aluminium Binding Wire - 6 SWG

HDPE Pipe 160 mm for cable riser

GI Top Channel 125x65mm, 3200 mm with clamp, bolts, nuts and washers

33kV 3x 120 mm2 XLPE Cable

Heat Shrinkable outdoor type termination kit suitable for 33kV XLPE 3x120 Sq. mm. cable size

Straight through Joint boxes suitable for H.T XLPE Cable of size 120 Sq.mm/3C for 33 KV

HDPE Pipe for Cable laying (Pipe to be laid by HDD Method) (For Road Crossing)

Laying of 3x120 sq. mm. 33 KV XLPE Insulated Cable underground in HDPE Pipe or trenches ( For Road Crossing)

Drilling & Laying of HT Underground Cable using HDD method without using HDPE Pipe

Mounting of cable on DP structure(including loop and riser)

Cable Route Marker

Miscellaneous Activities

Resagging & tightening of Dog/Raccon/Rabbit conductor

Resagging & tightening of LT ABC Cable 3x120+ 1x95 + 1x16

Additional Items

11 KV V Cross Arm (100x50x6)mm

33 KV V Cross Arm (100x50x6)mm

F-Bracket for 33 KV

F bracket for fitting top insulator with bolts & nuts for 11 KV

Complete Stay(G.I Stay rod 20x1800 mm , stay wire7/8 wire SWG 10 KG, stay clamp, bolt, nut & Washer with concerte grounting)

Bolts Nuts & Washers all sizes

Polymeric Disc Insulator 45 KN (B&S)

Polymeric 11 KV Pin Insulator

PG Clamp

Red Oxide Paint for existing Poles

Aluminium paint for existing Poles

GI MS Channel/MS Angle/MS Flat of Various Sizes for cantilever, for foundation, for supports, for structures etc.

400 kVA Mobile transformer with all cable and fixing arrangements for urgent services

SITC of SCADA Compatible RMUs

Outdoor type 11 KV SF6 type extensible and motorized 5 way smart Ring Main Unit (RMU) complete with three VCB and two LBS with FPI along with supply through 1 kVA auxilliary power transformer 11/0.230 KV as per Nigam Specs along with other allied material like cable, ternination kits etc. to connect the same with system

Outdoor type 11 KV SF6 type extensible and motorized 3 way smart Ring Main Unit (RMU) complete with One VCB and two LBS with FPI supply through 1 kVA auxilliary power transformer 11/0.230 KV as per Nigam Specs along with other allied material like cable, ternination kits etc. to connect the same with system

Communicable

UG Cable from Pole top to RMU and from RMU to DTs

Supply, laying of 11 kV XLPE, 3 C X 185 Sq.mm Cable insulated UG cable including provision for proper support to hold the cable at Pole DTR end till it reaches the ground level and laying under ground as per site condtion for connections of overhead conductor to RMU and as well as from RMU to Distribution Transformer complete in all respects as per specification

Control/power cable for RTUs from outdoor switchgear,if any at S/S and numerical relays

Control Cable armoured (1 sq mm for Control and Monitoring element wiring) (as required) with miscellaneous consumables items for e.g. connectors, thimbles etc (30 mtr per DSS)

Control Cable armoured (2.5 sq mm for CT & PT wiring) (as required) with miscellaneous consumables items for e.g. connectors, thimbles etc (30 mtr per DSS)

Numerical Relay

11 kV Indoor Switchgear Panel Complete in all respects as per speciication and direction of Employer/PMC.

Simplex Cubicle Switchgear Panel for Transformer Incomer complete in all respects as per specification and direction of Employer/PMC.

Simplex Cubicle Switchgear Panel for outgoing line complete in all respects as per specification and direction of Employer/PMC.

Simplex Cubicle Switchgear Panel for Bus coupler complete in all respects as per specification and direction of Employer/PMC.

Bus VT PT1 and PT2 for measauring panels Complete in all respects

Spares

Simplex Control and Relay Panel for HV Side of 33/11 kV Transformer at Taxistand Substation complete in all respects as per specification and direction of Employer/PMC.

Auxiliary Power Supply ; Main Equipments - Control centre

UPS with suitable rating running in parallel redundant mode* with VRLA type Battery banks for above UPS for minimum 30 min. backup duration

For RTU / Data Concentrator / Communication Eqpts.

DC Power Supply (DCPS) system based on SMPS and Battery bank for above DCPS (VRLA Type) for minimum 4 hrs backup

For FRTU

48V DC Power Supply (DCPS) system based on SMPS and Battery bank for above DCPS (VRLA Type) for minimum 4 hrs backup

Spares

Communication System - MPLS

6 Core FO Cable including Laying as per Nigam Specs along with other allied material like ties, joint boxes etc to connect the same with system

Fibre Optic Teremination System complete in all respects as per Nigam Specs

MPLS Router

Annual charges for 2MBps Links with FRTUs /FPI for two years

Modems

Spares

RTU base equipment comprising panels, racks, sub-racks, Power Supply modules, CPU, interfacing equipment, required converters & all other required items/accessories including complete wiring for all modules.

Multifunctuions transducers

Contact Multiplying Relays (CMRs)

Heavy duty relays for Control

Dummy Breaker Latching Relays

Transformer Transducers

Single TFT PC for LDMS

Serial Communication Cable (2 Pair armoured with steel Conduit) to Integrate existing Relay or MFM (100 mtr per PSS).

Ethernet CAT6 Cable with steel Conduit to Integrate existing Relay, BCU, BPU & BCPU (100mtr per PSS) with miscellaneous consumables items like RJ 45 connectors & patch code etc.

Software for LDMS

LDMS software

TEST EQUIPMENTS for RTU

RTU Database Configuration & Maintenance Software tool

Master Station cum RTU Simulator & Protocol analyser software tool

Laptop PC for above software tools along with interfacing hardware including Hub

Mandatory Spare

FRTUs

Mini pole mounted FRTU base equipment along with enclosure suitable to work in open environment (Adequate protection from water & dust) , racks, sub-racks, Power Supply modules with power backup , I/o modules, CPU, interfacing equipment, required converters & all other required items/accessories including complete wiring for all modules

Contact Multiplying Relays (CMRs)

Heavy duty relays for Control

Multifunction trnasducer

Test Equipments for FRTU

FRTU Database Configuration & Maintenance Software tool

Master Station cum FRTU Simulator & Protocol analyser software tool

Laptop PC for above software tools along with interfacing hardware including Hub

Spares

Software for Control Centre

SCADA software

ISR Software

DMS software

DTS software

Developmental software

Network Management Software

GIS Adaptor/Engine for importing data from GIS system under IT system

Backup Software - compatible to proposed Architecture

Spares

SCADA/DMS control centre-Server/ workstation Hardware

SCADA Server

DMS Server

FEP server with interface switches

ISR server

NMS server

DTS server

Developmental server

Commnuication Server

Web/Directory server

SMS gaterway

Workstation with dual TFT Monitors ( S/S monitoring)

Workstation with dual TFT Monitors (Network monitoring)

Remote VDUs with one TFT Monitors

Developmental console with one TFT

DTS/Workstation Console with dual TFTs

DLP/ LED based Video Projection system with 3x4 Module configuration with each module at least 67" diagonal with common projector

Storage & Backup Devices

External RAID Mass storage device ( for 24 months online backup)

Switches

Layer II switch (SCADA/DMS LAN)

Layer II switch ( Planning & Development system LAN)

Security system (DMZ)

Firewall & network IDS/IPS

Layer II Switch

Other Active Devices

GPS Time synchronisation system

Time, day & date digital displays

Printers

Color inkjet printer

B/W Laser printer

Software for Control Centre

Facility Managament Services for 2 Years after GO-LIVE

JSP Projects Private Limited

Reliance Elektrik Works