SPECIAL REPAIRS TO LT PANELS LT UG CABLES STREET LIGHTS METER BOX AT NTG NLC VARUNA COMPLEX TRIVENI COMPLEX AND REPLACEMENT OF BER CEILING FANS UNDER GE NORTH BANGALORE

Amount

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in deep for cable and getting in hard/dense soil complete all as specified and as directed by Engineer-in-charge.

Returning, filling in, including spreading, leveling, watering and well ramming, in layers not exceeding 25 cm complete using soil complete all as specified and as directed by Engineer-in-charge.

Removing surplus spoil to a distance not exceeding 50 mtr and deposting where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed by Engineer-in-charge.

Sand cushioning in layers for cables in trenches / ducts for cable including consolidation complete all as specified and directed. NOTE: Punned thickness will be measured for payment purpose.

Bricks, sub class 'B' of old size 230 mm x 115 mm x 75 mm laid in trenches for cable protection all as specified and directed.

Galvanised iron steel tubing 50mm bore, light grade, with all fittings fixed complete on walls, poles, laid under floors or in trenches as cable protection works including necessary clamps, bolts, nuts, etc.) all as specified and as directd.

XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cable (heavy duty) 1100 Volts (earthed) grade with stranded aluminium conductor of size 120 sq.mm 3.5 core connected with suitable lugs, gasket including taking out the existing unserviceable cable all as specified and as directed.

XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cable (heavy duty) 1100 Volts (earthed) grade with stranded aluminium conductor of size 70 sq.mm 3.5 core connected with suitable lugs, gasket including taking out the existing unserviceable cable all as specified and as directed.

XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cable (heavy duty) 1100 Volts (earthed) grade with stranded aluminium conductor of size 35 sq.mm 3.5 core connected with suitable lugs, gasket including taking out the existing unserviceable cable all as specified and as directed.

XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cable (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 6 sq.mm, 4 core connected with suitable lugs, gasket including taking out the existing unserviceable cable all as specified and as directed.

LED street light fitting 90 Watt including lamp, new generation energy saving and environmental friendly long life versatile pressure die cast aluminium IP-66 roadway luminaire with high power LED as light source with toughened glass. all as per Havells Cat No. ENDURA PEARL PLUS SL90 WLED 757 SASYTOPC or Bajaj Cat No BRTFG 90W including taking down the existing fittings complete all as specified and as directed.

Brackets made out of GI tubing light grade 40mm bore of 1.50 mtr length bent to required shape and pattern to mount the street light, including MS clamps made out of MS flat iron 25 x 10mm, nuts, bolts, washers etc and applying two coats of alumium paint over a coat of red oxide primer including taking down the existing brackets complete all as specified and as directed.

Horizontal trenchless bore drilling using mechanical pneumatic drilling equipment for passing and including cost of HDPE pipe of 100 mm dia suitable for 0.40 Mpa working pressure under hard standings, depth range not less than 0.75m and up to 1.0 m and making good to disturbed surfaces of road all as specified and as directed: NOTE:- Unit rate is deemed to be include the cost of deposit and taking permission from civil authorities.

Wiring with two runs of single core 1.5 sq.mm PVC insulated FRLS cable with multi stranded copper conductor cable, 1100 volts grade, for connection from cable loop box to street light on PCC pole/ steel tubular poles including provision of one run of 1.5 sq.mm PVC insulated FR Cable with multistranded copper conductor as in earth continuity conductor drawn through and including rigid PVC conduit medium grade of 20 mm dia fixed with clamps of size 20 x 3 mm tightened with nuts and bolts of suitable sizes connect to main earth dolly including taking down the existing wiring all as specified and as directed. NOTE:- Two runs of 1.50 sq.mm cable, one run of 1.50 sq.mm earth continuity conductor and one run of PVC conduit shall be measured as one unit for payment purpose.

PVC cable loop box of size 295 mmx 255 mmx120mm outside dimension out door type duly fitted on bottom of PCC pole/Steel poles with suitable clamp, nut, bolt& washers complete with porcelain insulated connectors/ bus bars for in and out going connections all as per Sintex Cat pat No. GSJB 2520 or techno commercially equivalent makes specfied in PS including taking down the existing boxes complete all as specified and directed .

Earthing complete with galavnized steel earth plate electrode 600mm x 600mm x 6mm thick burried directly in ground vertically to a depth not less than 2.25 meter below ground level with top edge of earth plate at a depth not less than 1.5 mtr connected to and including galavnized iron wire of 4mm dia as earth lead up to 7.5 mtr long by means of nuts, bolts, thimbles, check nuts and washers etc., made out of galvanized iron connected to earthing test point through protection pipe of GI light grade of 40 mm dia all as shown in electrical plate No 3 of SSR Part - I 2009 and as specified or indicated and testing on completion including earth work and excavation in any type of soil, PCC (1:3:6) type C 1 chamber, precast RCC slab 40mm thick in cement concrete (1:2:4) type B 1 with 10 mm dia TMT bars reinforced at 10 cm centre to centre both ways incl funnel with watering pipe of 20 mm dia medium grade, wire mesh and lugs, including test point and cable connected with suitable size GI lugs including taking down the existing earthings complete all as specified and as directed.

Earthing complete with galavnized steel earth plate electrode 600mm x 600mm x 6mm thick burried directly in ground vertically to a depth not less than 2.25 meter below ground level with top edge of earth plate at a depth not less than 1.5 mtr connected to and including galavnized iron strip of size 25 x 4 mm as earth lead up to 7.5 mtr long by means of nuts, bolts, thimbles, check nuts and washers etc., made out of galvanized iron connected to earthing test point through protection pipe of GI light grade of 40 mm dia all as shown in electrical plate No 3 of SSR Part - I 2009 and as specified or indicated and testing on completion including earth work and excavation in any type of soil, PCC (1:3:6) type C 1 chamber, precast RCC slab 40mm thick in cement concrete (1:2:4) type B 1 with 10 mm dia TMT bars reinforced at 10 cm centre to centre both ways incl funnel with watering pipe of 20 mm dia medium grade, wire mesh and lugs, including test point and cable connected with suitable size GI lugs including taking down the existing earthings complete all as specified and as directed.

Time lite distribution boxes (timer boxes) for street light control including Digital timer 32 Amps, 3 pole, 230 Volts with power contactor of 32 Amps and MCB TPN 32 Amps with inernal wiring etc., fixed with suitable size of clamps, nuts and bolts fixed on pole/wall all as per Indo Asian Cat Part No: TL032AB0 or techno commercially equivalent makes specfied in PS including taking down the existing boxes complete all as specified and directed.

Supply, install, testing and commissioning of LT feeder pillar panel, out door type, weather proof made out of 3 mm thick CRCA sheet duly powder coated of suitable size and medium channel 75 mm base mounting frame, double door, factory assembled, cubicle pattern, modular and compartmenlized construction, floor mounted free standby type, 3 phase and neutral suitable current carrying capacity aluminum bus bar with epoxy insulating with colour code (RYB) and insulated support, cable gallaries inter connectiong bus bar connection / linkage complete conforming to IS 8623 and IP 54 class of protection as per IS 2147 complete with including supply and fix following accessories and mounting the panel board on ground with PCC (1:2:4) foundation concrtete upto a height of 30 cm above ground level including taking down the existing LT panel complete all as specified and directed. Contd/.. 1.19

Removing the existing single phase energy meter carefully by disconnecting all the electrical connections, removing the wooden board for refixing the the same in the new meter boxes all as specified and as directed.

Wall mounted fabricated sheet metal enclosure of sutable size made out of 2 mm thick powder coated CRCA sheet for fixing of 6 Nos of single phase energy meter, with provision of 8 mm thick plywood board fitted inside for fixing of meters, front openable door with provision of look out glass on front, with locking arrangement etc including fixing of all existing electric meters and all electrical connections etc complete all as specified and as directed.

Wall mounted fabricated sheet metal enclosure of sutable size made out of 2 mm thick powder coated CRCA sheet for fixing of 4 Nos of single phase energy meter, with provision of 8 mm thick plywood board fitted inside for fixing of meters, front openable door with provision of look out glass on front, with locking arrangement etc including fixing of all existing electric meters and all electrical connections etc complete all as specified and as directed.

Wall mounted fabricated sheet metal enclosure of sutable size made out of 2 mm thick powder coated CRCA sheet for fixing of 2 Nos of single phase energy meter, with provision of 8 mm thick plywood board fitted inside for fixing of meters, front openable door with provision of look out glass on front, with locking arrangement etc including fixing of all existing electric meters and all electrical connections etc complete all as specified and as directed.

Vertical DB, VTPN 6 ways with MCCB as incomer, double door with provision for MCCB TP 125 Amps in 16 KA as incomer, IP 54 protection ,conforming to IS-13032, universal mounting with copper bus bar, neutral link, earth link, earthing studs, detachable gland plates with knockouts on both sides fixed and concealed in walls including all elcctrical connections in and out with proper finishing of the surafce all as per INDOASIAN Cat No. OPTIPRO 811883 or techno commercially equivalent makes specfied in PS including taking down the existing boxes complete all as specified and directed .

Sub main wiring complete with two runs of 6 sq.mm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable with one run of 6 sq.mm single core PVC insulated FRLS cable 1100 volts grade multistranded copper conductor cable as earth continuity conductor, drawn through and including 25 mm dia non metallic rigid PVC conduit and conduit accessories including taking down the existing wiring complete all as specified and as directed. NOTE:- Two runs of 6 sq.mm cable, one run of 6 sq.mm earth continuity conductor and one run of PVC conduit shall be measured as one unit for payment purpose.

MCB single pole and neutral 240 volts 32 to 40 Amps complete including taking down the existing all as specified and as directed.

MCB single pole, 240 volts 5 to 40 Amps complete including taking down the existing all as specified and as directed.

Energy saving ceiling fans, 230 Volts, 26 Watts, single pole, 1200 mm sweep, high speed of approved colour with remote control and two years warranty certificate from the manufacturers, with latest BEE five star rating and BLDC technology all as per Havells Model No :- Efficiencia Neo (BLDC 26W) or techno commercially equivalent models specified in PS complete with down rod and GI hook with welding work, wire connections from ceiling rose to ceiling fans, with complete accessories including writing of MES No with unit name on ceiling fans using approved stencil with synthetic enamal paint complete all as specified and as directed.

M/S Anu Enterprises

Vasavi Electricals

RAMSON TRADERS

M.G. Enterprises

B M Electricals

kamadhenu Electricals