Repair and Renovation of 03 Bedded ICU at CHC Katra by way of outerside face lifting and connecting New Complex and Old Complex.

Amount

Earth work in excavation by mechanical means (Hydraulic excavator) in foundation trenches, drains, pipes and cables etc. (not exceeding 1.5mtr in width or10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5mtr including getting out excavated soil and disposal of surplus soil as directed, within a lead of 50 mtr. All kinds of soil

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering- All work upto plinth level 1:4:8 (1 cement: 4 fine sand : 8 graded stone aggregate 40mm nominal size) (Crushed) including all leads, lifts and carriages complete.

Reinforced cement concrete work in walls (any thickness), including attached pilasters,buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts ans sturts, etc. upto floor five level excluding cost of centring, shuttering, finishing and reinforcement.1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded crushed stone aggregate 20mm nominal size) including all leads, lifts and carriages complete.

Providing and laying Reinforced Cement Concrete 1:1.5:3 (1 cement: 1.5 coarse sand: 3 graded stone aggregate 20 mm nominal size) in suspended floors,balconies, landings and staircase having upto 15°slope. excluding cost of centering and shuttering ,all work upto floor V level including all leads, lifts and carriages complete.

Reinforcement for RCC work incl. straightening, cutting, bending, placing in position and binding all complete including all leads, lifts and carriages complete.

Steel work in built up tubular round, square or ectangular including cutting , hoisting , fixing in position and applying a priming coat of approved steel primer including welding and bolting with special shaped washers c.complete. Hot finished seamless type tubes

Strctural steel work in single section fixed without connecting plate including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

P/F Tata Steel corrugated sheet roofing including vertical/curved surface fixed with J or L hooks, bolts and nuts limpet washers excluding the cost of purlins, rafters and trusses and including cutting to size and shape whereever required total coated thickness shall be 0.50mm thick coating with zinc columns A2 150 1508/m2 55% Aluminium 43.5 % Zinc 1.5% as per IS 15961 with super durable polyster color bonds steel XRW quality paint system of approved colour comforing to 15965 class including Tax and contractor profit.

Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm and braced with flatiron diagonals 20x5 mm size with top and bottom rail of T -iron 40x40x6mm with 40mm dia, steel pulleys complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer

Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead :In cement mortar

Removing mortar from bricks and cleaning bricks including stacking within a lead of 50 m. (stacks of cleaned bricks shall be measured) :From brick work in cement mortar

Brick work with common burnt clay F.P.S (non modular) bricks of class designation 75 in foundation and plinth in cement mortar 1:6 (1 cement: 6 fine sand) including all leads, lifts and carriage complete.

Extra for brick masonry in super structure above plinth level upto flour V level including all leads, lifts and carriage complete (By mannual means).

6mm cement plaster to ceiling of mix 1:3 (1 cement: 3 fine sand) including all leads, lifts and carriages complete.

12mm thick cement plaster of mix 1:4 (1cement: 4 fine sand) including all leads, lifts and carriages complete.

Repairs to plaster of thickness 12mm to 20 mm in patches of area 2.5 sq. metres and under including cutting the patch in proper shape raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 metres lead :With cement mortar 1:4 (1 cement: 4 coarse sand) including all leads, lifts and carriages complete.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering-All work upto plinth level in 1:3:6 mix(1 cement : 3 coarse sand : 6 graded crushed stone aggregate 20mm nominal size) (Crushed) including all leads, lifts and carriages complete.

Steel work welded in built up section/ framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In grating, frames, guard bar, ladders railings, brackets, gates & similar works.

Providing and applying white cement based putty of average thickness 2 mm, of approved brand and manufacture, over the plastered wall surface to prepare the surface even and smooth complete.

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Wall Painting with plastic emulsion paint of approved brand and manufacture to give an even shade. Two or more coats on new work

Finishing walls with acrylic smooth exterior paint of required shade on New work (two or more coats applied @ 1.67 litre/1 0 sqm over and including base Coat of water proofing cement paint applied @ 2.20kg/10sqm)

Finishing walls with Acrylic smooth exterior paint of required shade on old work (two or more coats applied @ 1.67 litres/ 1 0sqm on existing cement paint surface)

Providing and fixing glazed shutters for doors, windows and clerestory windows using 10kg/sqm (4mm thick) float glass panes including lSI marked M.S. pressed butt hings bright finished of required size with necessary screws.Second class deodar wood

Providing and fixing aluminium tower bolts lSI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete :100x10 mm

Providing and fixing aluminium handles lSI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws etc. complete.

Engagement of carpenter and Helper for repairing and re-fixing of existing Panels.

Carpenter

Helper

Applying one coat of water thinable cement primer of approved brand and manufacture on wall surface Water thinable Cement primer

Renewing glass panes, with wooden fillets wherever necessary Glass panes weighing 10 kg/sqm

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: One or more coats on old work

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work

Centering and shuttering incl. strutting, propping etc. and removal of form work for including all leads, lifts and carriage complete:-

Foundation, footings, bases of columns etc. for mass concrete.

Walls (any thickness) including attached pilasters, buttresses, plinth and string courses fillets etc

Lintel beam, plinth beams, girders, bressumers and centilevers.

Suspended floors, roofs, landing, balconies and access platforms.

Edges of slabs and breaks in floors under 20cm wide.

Columns, Pillars, Piers, Abutments, Posts and Struts

Dina Nath Contractor