SPECIAL REPAIRS OF FLOOR TILING IN BLDG NO. P-177, WING-V OF CHQ WING AT ARTY CENTRE AND CERTAIN SANCTIONED WORKS UNDER GE NASIK ROAD CAMP

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises

Demolition of un-reinforced cement concrete in ground floors and pavings not exceeding 15 cm thickness.

Demolition of Concrete work of any description and in any position not otherwise specifically provided for

M&L for 30 mm thick PCC 1:2:4 type B1 (Using 20 mm graded stone aggregate) in sub base of floorings.

M&L for cement concrete type B-1, 1:2:4 (20 mm graded aggregate) 25 mm thick as a base complete all as specified and directed.

M&L for applying one coat of oil emulsion distemper on walls white or tinted incl preparation of old surfaces

M&L for 10 mm thick rendering in CM 1:4 on brick masonary wall and surfaces rough finished to receive tiles

M&L for rendering 10 mm thick cement plaster on fair faces of brick work or concrete surfaces in CM 1:6 and rendering is to be finished even and smooth without using extra cement .

M&L for rendering 15 mm thick cement plaster on other than fair faces of brick work or concrete surfaces in CM 1:4 and rendering is to be finished even and smooth without using extra cement .

M&L for rendering 15mm thick in cement mortar (1:6) on fair faces of brick work and concrete surfaces and finishing even and smooth with using extra cement complete all as specifed and directed

M&L for rendering 10 mm thick cement plaster on other than fair faces of brick work or concrete surfaces in CM 1:4 and rendering is to be finished even and smooth without using extra cement .

M&L for rendering 10 mm thick cement mortar on brick surfaces in cm 1:4 finished even and fair with out using extra cement complete all as specifed and directed

M & L for screed bed or bedding layer of cement mortar 15 mm thick for laying floors finishes in cement mortar 1:6.

M&L for Coloured non skid ceramic tiles 7 to 8 mm thick (Square / rectangular) area of each tile exceeding 0. 11 sqm but not exceeding 0.18 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or Coloured cement to match over and including 15 mm thick screed bed or bedding layers in CM 1:4.

M&L for coloured non skid ceramic tiles 7 mm to 8 mm thick area of each tile exc 0.06 sqm but not exceeding 0.11 sqm thick set and jointed in neat cement slurry nd pointed in coloured cement to match in floor etc complete all as specifed and directed Note : Cement mortar screed bed layer shall be measured & paid separately

M&L for glazed ceramic tiles coloured size 300 x 200 x 7 mm thick as on vertical surfaces, of walls as in skirting, dado etc set and jointed in neat cement slurry & pointed with coloured cement to match complete all as specified and directed

Surface excavation nexc 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil.

Excavating in trenches,n exc 1.5 m wide and n exc 1.5 m in depth for foundation etc in any type of soils.

Removing excavated material n. exc 50 m and depositing where directed at a level nexc 1.50 m above the starting point in soft / loose soil.

Returning , filling in, including spreading levelling, watering and well ramming in layers nexc 25 cm.

M&L for hard core of gauge n. exc 63 mm, deposited, spread and levelled inlayers nexc 75 mm thick, watered and rammed to a true surface of broken stone or boulder.

M&L for cement concrete 1:4:8 type D-2 as in foundation filling and mass concrete.

M&L for 75 mm Thick Cement concrete type D-2, 1:4:8 (40 mm graded aggregate) as in sub base all as specified and directed.

M&L for 75 mm thick Cement concrete type C2, 1:3:6 (using 40 mm graded stone aggregate) in hard standing / plinth protections, finished even and smooth with using extra cement

S&F steel work in tublar purlins, post, rafter including necessary cutting welding etc complete

S&F rolled mild steel plain angle cleats and plate for securing purlins to rafter and similar small articals confirming to Fe-410-0 or Fe -310-0 complete all as specified and directed

S & F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws as specified

S & F pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridges, hips, valley gutter, drip and straight flashing.

M&L for two coat of synthetic enamel paint over one coat of red oxide primer on new steel surfaces, girth or width exc 10cm

M&L for two coats of cement base paint over a coat of cement primer on external faces of walls including preparation of newly plastered surfaces complete all as specified and directed by Engr in Charge.

M&L for two coats of oil bound distemper over a coat of primer on internal faces of walls including preparation of newly plastered surfaces complete all as specified and directed by Engr in Charge.

M&L for M-35 grade rubber moulded machine pressed precast inter locking paver block with gray cement any shape and size confirming to IS 15658-2006 of 60 mm thickness, laid on and including 30 mm thick stone dust cushioning laid dry to the profile complete all as specified and directed

S&F for Framed work such as grills, gratings etc., with ends of bars shouldered and / or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0 with framed and hung as gates, including pintle hinges, stops, hand-made sliding bolts, etc.

Taking down cement plaster on brick or stone wall etc including raking out joints hacking for keys scrubbing down with water etc. all as specified and directed

S&F tubes medium grade, galvanized with iron all fittings fixed to walls, ceiling and laid in floor of size 15 mm dia complete all as specified and directed :-

All as per Ser item No 35 here in before, but of size 20 mm dia.

M&L for brick work with fly ash bricks straight or curved work on plan with mean radius n.exc 6 m with bricks roughly cut to radius or bricks with wedge shaped joints in cement mortar 1:6 complete all as specified and directed.

S&F stop valve, 20mm bore dia PTMT of any colour high pressure screwed for iron pipe and fixed (Minimum weight 90 gms) complete all as specified and directed

Supply and fixing Chain link MS galvanised fencing of mesh size 75 mm x 75 mm of 3 mm dia wire square mesh type incl fixing of any type of standard, rails, angles / posts and stranding bolts etc

Cutting holes in brick walls built in cement mortar or cement lime mortar and stone walls built in lime mortar, for inserting holdfast and making good dismantled portion in cement portion depth of embeded portion of 1:3 or cement concrete 1:2:4 Type B1 as required

Excavation in post holes (or similar holes) each not exc 0.5 m getting out, returning, filling in and ramming earth or broken rubble mixedwith earth around, in layers not exc 25 cm,watering and removing surplus soil to a distance nexc 50 m and making good surfaces in soft/loose soil

M&L for cement concrete 1:2:4 type B-2 as in foundation filling and mass concrete as in post

M&L for cement concrete 1:3:6 type C-2 as in foundation filling and mass concrete.

M&L for plain cement concrete 1:3:6 type C1 (using 20 mm graded stone aggregate) as in coping

M&L for damp proof course to horizontal or vertical surfaces including necessary formwork in cement concrete 1:2:4, Type B0 25 mm thick complete all as specified and directed by Engr in Charge.

S&F Machine cut cudappa stone slab 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete Note: screed bed layer measured seperately complete all as specifed and directed

M&L for granite (of any type) work (table rubbed and polished) 20 mm thick in steps, jambs, pillars,cooking platforms and like in cement mortar 1:4 incl pointing in white cement 1:2 using marble dust with admixture of pigment to match the shade of granite

S&F II nd class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, sup-plied and fixed to walls complete all as specified and directed.

S&F (IInd class hard wood) factory made Glazed and skeleton shutters 30 mm thick, open rebated and prepared to receive glass, gauze, etc. (divided in to square with sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Sec-tion 8, cla-use 8.24 (a); supplied and fitted to chowkats complete all as specified and directed.

M&L for preparation of new wooden surface of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer.

S&F mild steel steel butt hinges 75 mm size medium weight complete all as specified and directed

S&F 100 mm Mild steel barrel tower bolts, stove enamelled black, with bright bolt complete including fixing in repair all as specified and directed.

S&F 100 mm mild steel pressed handles, oval type, stove enamelled black complete all as specified and directed.

S&F Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.40 mm complete all as specifed and directed

S & F Aluminium plate type II Gate and shutter, hook & eye 150 mm size

Excavation in trenches in soft / loose soil not exceeding 1.5 mtr wide for laying of cable, RCC poles / stays and structs etc., and getting out including trimming sides and forming bottom surface complete all as specified and directed at site.

M&L for high density polyehylene pipes (HDPE) of pressure rating 6 Kgf / cm2 laid in trenches of size 50 mm suitable for cable protection complete all as specified and directed.

S&F XLPE insulated, armoured heavy duty electric cable with aluminium cable conductor, 1100 Volts grade cross sectional area 3.5 core 35 Sqmm.

M&L for earthing complete with galvanised steel earth plate electrode size 600 x 600 x 6.3 mm thick buried directly in ground vertically in a pit of depth not less than 2.25 mtr below ground levels with top edge of the earth plate not less than 1.5 mtr below normal ground level surrounded from all sides by mixture of charcoal and common salt and electrode connected to and including galvanised earth lead 4.0 mm dia by means of bolts, nuts, check nuts and washers of galvanised including GI protection pipe light grade 15 mm dia connected to main earth wire on pole or control board and GI pipe light grade 20 mm dia bore for watering funnel with wire mesh. CI cover with frame, PCC chamber pit with PCC 1:3:6 type C-2 excavation and earth work all as shown in electrical plate No. 5 connected to earthing test point all as specified or indicated inluding testing on completion.

S&F 4 way MCCB powerlinevertical DBs in double dorr suitable for TP / FP MCCB, bus bar with current rating capacity upto 250A, IP-43-IK09 protection grade complete all as specified and directed by Engr-in-Charge.

S&F MCCB TPN 100 Amps, 415 Volts, 25 KA, 4 pole.

S&F MCB TPN 415 Volts, 'C' series, breaking capacity 10 KA of rating 63 Amps

S&F for MCB SP 6-32 Amps 'C' series, breaking capacity 10 KA of rating.

M&L for Sub main wiring power / circuit using PVC insulated unsheathed, stranded copper conductor cable 4 x 6 Sqmm + 1 x 6 Sqmm earth continuity conductor to be drawn through and including PVC conduit not less than 32 mm dia medium grade on surface walls / roof / floors complete all as specified and directed. Note :- (i) Four wires of 6 Sqmm and one wire of 4 Sqmm and one run of PVC conduit shall be measured as one unit (for 3 phase, supply).

M/S SAMEER SUBHASH PATANI

Vinod Enterprises

Vishal Constructions

M/S MANISH CONSTRUCTION CO

SHILPVED

UNITED ENTERPRISES

Srujan Associates

M/S MK Nair

Bidder Name

M/S MANISH CONSTRUCTION CO

Vishal Constructions

M/S SAMEER SUBHASH PATANI

M/S K. K. Construction

UNITED ENTERPRISES

M/S MK Nair

Vinod Enterprises

SHILPVED

Srujan Associates