REPAIR AND MAINT OF PUMP SETS, CLEANING OF UGS SUMPS,OHTS AND EXTERNAL WATER SUPPLY NETWORK AT INS HAMLA AND LT PANELS/CABLES AND OTHER MISC EXTERNAL ELECTRIFICATION AT MO (MB) GHATKOPAR UNDER GE(NW) BHANDUP

Amount

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth for exposing getting out GI/CI pipes in Soft/loose soil all as specified and as directed.

Returning filling in including spreading leveling watering and well ramming lin layers not exceeding 25 cm after the pipes have been laid all as specified and directed.

Removing excavated material to a distance n.exc 50 m and depositing where directed at a level n.exc 1.5 mtr above the starting point complete all as specified and as directed.

Taking up / down old unserviceable chocked rusted GI pipe & fittings complete for bore of pipes 50/40 mm dia bore

Taking up / down old unserviceable chocked rusted GI pipe & fittings complete for bore of pipes of 25mm dia bore

Taking up / down old unserviceable chocked rusted GI pipe & fittings complete for bore of pipes of 20mm dia bore

Supply and laying in trenches /fixing to wall / ceiling or floor, jointing, GI tubing, medium grade including all fittings such as bends, elbows, tees, union, short pieces, connectors, check nuts, caps, plugs etc of bore of pipes of 50mm dia bore complete all as specified and directed.

Supply and laying in trenches /fixing to wall / ceiling or floor, jointing, GI tubing, medium grade including all fittings such as bends, elbows, tees, union, short pieces, connectors, check nuts, caps, plugs etc bore of pipes of 40mm dia bore complete all as specified and directed.

Supply and laying in trenches /fixing to wall / ceiling or floor, jointing, GI tubing, medium grade including all fittings such as bends, elbows, tees, union, short pieces, connectors, check nuts, caps, plugs etc bore of pipes of 25 mm dia bore complete all as specified and directed.

Supply and laying in trenches /fixing to wall / ceiling or floor, jointing, GI tubing, medium grade including all fittings such as bends, elbows, tees, union, short pieces, connectors, check nuts, caps, plugs etc bore of pipes of 20 mm dia bore complete all as specified and directed.

Supply and Laying/fixing 3-layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN 16) UV stablised and antimicrobial welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings laid in trenches for the pipe size 63mm bore outer dia (50 mm internal dia) complete all as specified and directed.

Supply and Fix Ductile iron mechanical(Coller type) Joint by Cutting The existing cast iron pipes and reducing to required length for insertion of new Mechanical joint for the Pipe size dia 150 mm complete all as specified and directed. Note : The rate for excavation of earth work will paid and measered seperately.

Supply and Fix Ductile iron mechanical(Coller type) Joint by Cutting The existing cast iron pipes and reducing to required length for insertion of new Mechanical joint for the Pipe size dia 100 mm complete all as specified and directed. Note : The rate for excavation of earth work will paid and measered seperately.

Supply,Install testing Class 'B' analog Water meter of MS body suitable for flange type at both ends for the pipe line Dia 100 mm size With ISI approved and tested by BMC complete all as specified specified and directed by the Engineer-in-Charge. Note : The rate quoted by contractor also include BMC testing charges etc. Make : Kranti/Flowtech/Zoloto or any equivalent specification approved by the GE.

Supply,Install testing Class 'B' analog Water meter of MS body suitable for flange type at both ends for the pipe line Dia 80 mm size With ISI approved and tested by BMC complete all as specified specified and directed by the Engineer-in-Charge. Note : The rate quoted by contractor also include BMC testing charges etc. Make : Kranti/Flowtech/ Zoloto or any equivalent specification approved by the GE.

Supply,Install testing Class 'B' analog Water meter of MS body suitable for flange type at both ends for the pipe line Dia 50 mm size With ISI approved and tested by BMC complete all as specified specified and directed by the Engineer-in-Charge. Note : The rate quoted by contractor also include BMC testing charges etc. Make : Kranti/Flowtech/Zoloto or any equivalent specification approved by the GE.

Supply and fix in replacement of sluice valve of size 150 mm dia with cast iron short body. Hand wheel with stainless steel spindle, checknut complete all as per IS -14846-2000 with nominal pressure rating, PN 1.6 including. material & labour for jointing flanged joint with rubber fibre jointing ring bolt nut & washer etc including necessary earth work. complete all as specified and directed

Supply and fix in replacement of sluice valve of size 100 mm dia with cast iron short body. Hand wheel with stainless steel spindle, checknut complete all as per IS -14846-2000 with nominal pressure rating, PN 1.6 including. material & labour for jointing flanged joint with rubber fibre jointing ring bolt nut & washer etc including necessary earth work. complete all as specified and directed

Supply and fix in replacement of sluice valve of size 80 mm dia with cast iron short body. Hand wheel with stainless steel spindle, checknut complete all as per IS -14846-2000 with nominal pressure rating, PN 1.6 including. material & labour for jointing flanged joint with rubber fibre jointing ring bolt nut & washer etc including necessary earth work. complete all as specified and directed

Supply and fix in repairs Non Return valve Cast iron body flanged suitable for 80mm bore GI delivery pipe connection all as specified and directed.

Supply and fix in repairs Non Return valve Cast iron body flanged suitable for 50mm bore GI delivery pipe connection all as specified and directed.

Supply and fix in repairs Foot valve Brass body flanged suitable for 80mm bore GI pipe connection all as specified and directed.

Supply and fix in repairs Foot valve Brass body flanged suitable for 65mm bore GI pipe connection all as specified and directed.

Supply and fix in repairs Foot valve Brass body flanged suitable for 50mm bore GI pipe connection complete all as specified and directed.

Supply and fixing PP-R gate valves (brass insert) as per requirement of the site of 63 mm bore dia pipe (internal dia 50mm) complete all as specified and directed.

Supply and fixing PP-R gate valves (brass insert) as per requirement of the site of sizes 50 mm bore pipe (internal dia 40mm) complete all as specified and directed.

Supply and fixing PP-R gate valves (brass insert) as per requirement of the site of following sizes 32 mm bore pipe (internal dia 25mm) complete all as specified and directed.

Supply and fix in repairs gun metal gate valve with iron wheel head, threaded both ends of size 50 mm duly ISI mark complete all as specified and directed.

Supply and fix in repairs gun metal gate valve with iron wheel head, threaded both ends of size 40 mm duly ISI mark complete all as specified and directed.

Supply and fix in repairs gun metal gate valve with iron wheel head, threaded both ends of size 25 mm duly ISI mark complete all as specified and directed.

Supply and fix in repairs gun metal gate valve with iron wheel head, threaded both ends of size 20 mm duly ISI mark complete all as specified and directed.

M & L for repairing/overhauling of the following Monoblock centrifugal pump set coupled with Squirrel cage induction motor by replacing of unserviceable parts like,gland packing, bearings, sleeves bushes, housing, shaft with gunmetal impeller including transporting to workshop & back and lath work for filling and grinding of shaft etc assembling the pump with new packing materials, nuts and bolts, washers, greasing, painting to the motor body metal cover and checking the alignment disconnect/connecting up with delivery, suction pipes testing of pump set after complete the work for following capacities all as directed by Engr - in - charge. (Note :- All spares suitable to existing pump set of Kirloskar make) (a) Pump set of 10 HP Capacity.

M & L for repairing/overhauling of the following Monoblock centrifugal pump set coupled with Squirrel cage induction motor by replacing of unserviceable parts like,gland packing, bearings, sleeves bushes, housing, shaft with gunmetal impeller including transporting to workshop & back and lath work for filling and grinding of shaft etc assembling the pump with new packing materials, nuts and bolts, washers, greasing, painting to the motor body metal cover and checking the alignment disconnect/connecting up with delivery, suction pipes testing of pump set after complete the work for following capacities all as directed by Engr - in - charge. (Note :- All spares suitable to existing pump set of Kirloskar make)for Pump Set of 7.5 HP Capacity

M & L for repairing/overhauling of the following Monoblock centrifugal pump set coupled with Squirrel cage induction motor by replacing of unserviceable parts like,gland packing, bearings, sleeves bushes, housing, shaft with gunmetal impeller including transporting to workshop & back and lath work for filling and grinding of shaft etc assembling the pump with new packing materials, nuts and bolts, washers, greasing, painting to the motor body metal cover and checking the alignment disconnect/connecting up with delivery, suction pipes testing of pump set after complete the work for following capacities all as directed by Engr - in - charge. (Note :- All spares suitable to existing pump set of Kirloskar make)for Pump Set of 5.0 HP Capacity

M & L for disconnect/reconnect the electrical connection and uncoupling from pump and dismantling from common base frame and opening of stater and rotor removing the burnt wiring and rewinding of the induction motor with suitable size of super enameled copper winding wire of existing gauge and insulating materials and sleeves, varnishing the winding, drying, replacement of terminal plate re assembled/installed in common base frame testing the motor with existing pump set of the following capacities including transportation to workshop & back all as directed for Electric motor of 10 HP Capacity.

M & L for disconnect/reconnect the electrical connection and uncoupling from pump and dismantling from common base frame and opening of stater and rotor removing the burnt wiring and rewinding of the induction motor with suitable size of super enameled copper winding wire of existing gauge and insulating materials and sleeves, varnishing the winding, drying, replacement of terminal plate re assembled/installed in common base frame testing the motor with existing pump set of the following capacities including transportation to workshop & back all as directed for Pump Set of 7.5 HP Capacity

M & L for disconnect/reconnect the electrical connection and uncoupling from pump and dismantling from common base frame and opening of stater and rotor removing the burnt wiring and rewinding of the induction motor with suitable size of super enameled copper winding wire of existing gauge and insulating materials and sleeves, varnishing the winding, drying, replacement of terminal plate re assembled/installed in common base frame testing the motor with existing pump set of the following capacities including transportation to workshop & back all as directed for Pump Set of 5.0 HP Capacity

Material and labour for replacement of unserviceable timer of starter, Type ET-100, range 9 to 30 sec adjustable type voltage 415 V including electrical connection all as specified and directed. Make L&T/Siemens or any equivalent ISI make approved by the GE.

Material and labour for replacement of unserviceable water pressure gauge of the range 0 to 7.5 Kg /sqcm complete all as specified and as directed.

Material and labour for replacement of un serviceable power contactor for starter of water pump including all electrical connection of the following type complete all as specified and as directed Note : Power contactor type ML 1.5 suitable for 5.0/7.5/ 10 HP pump set starter. Make L&T / Siemens or any equivalent ISI make approved by the GE.

Material and labour for replacement of un serviceable Single phase preventor 230v 50 hz supply operated for overload protection of 3 phase water pump including all electrical connection of the following type complete all as specified and as directed Make L&T / Selec/ Siemens or any equivalent ISI make approved by the GE.

Supply & fix in replacement ISI approved Digital ammeter 0-30 Amps with suitable size CT for the existing Motor panel including rotary switch complete all as specified and directed.

Supply & fix in replacement ISI approved Digital Multifunction meters measures V,A,f,p.f at 3 phase 415 V,50 HZ AC with suitable size for the existing Motor panel including rotary switch complete all as specified and directed.

Supply & fix in repairs indicator neon lamp,230V,SP Square or round complete all as specified and directed

Supply & fix flexible PVC hose pipe heavy duty 40/50mm dia for suction sweeper complete all as specified and directed

Supply installed and replacements of water level indicator with providing electronic type water level indicator electrically operated including indicator box , regulating , controls and connecting cables etc with provision of sensors inside the OH tank of capacity one lakh gallon at main Pump House/ NSB OH tank for both inner and outer tank including drilling Holes, hold-fast and clamps etc complete all as specified and directed.

M&L for PVC unarmoured copper conductor cable 1.5 sqmm 6 core for providing electric supply to water level indicator in PVC conduits of suitable size fixed to wall / ceiling complete all as specified and directed.

Supply, installing, testing and commissioning factory made and tested Motor Control LT Panel Indoor type,(CPRI Approved) wall mounted, suitable for 415 Volts 3 Phase and neutral, 4 wire, 50Hz AC supply system. shall be dust and vermin proof, protection class (IP-51) and made of 2.00 mm thick Stainless Steel Sheet SS316 thick & suitable frame work/ support made out of MS Angle Iron Frame with suitable size.The panel shall have front opening type with space for cable entry from bottom side of the panel, with proper ferrule & cable gland, internal wiring with Aluminium Bus bars/PVC insulated multistranded copper conductor FRLS cable of adequate size but not less than 16 sqmm complete. Location:- Swimming Pool Make:-Universal Switchgear or equivalent specification of CPRI Approved. The scope of work also comprising of the following:- BUS BAR CHAMBER :- (a) 200 Amp 3 Strips & Neutral Strip 100 Amp, Aluminium conductor, with color coded heat shrinkable sleave and shall be mounted on non hygroscopic, non combustible, track resistant, high strength DMC material, interconnection of all incomings & outgoings. INSTRUMENT CHAMBER :- (a) Multifunction Meter of Digital Type for Measurment of Three Phase Voltage,Current,P.f,Frequency -01 Nos (b) C.T's 200/5 A CL 1.0 Tape Wound- 01 Set. (Set of three)(c) Red, Yellow, Green Phase indicating Lights LED type 220 V AC- 1 Set. (Set of three).(d) Protection MCB 6 A SP C Series- 1 Set. (Set of three). Make of Metering Accessories :-L&T/ AE/ Trinity/ Schneider. INCOMING SUPPLY :- (a) MCCB 100 Amps 25 KA , 4 Pole, thermal & magnetic release 415 volts , 50Hz,=01 No. OUTGOINGS :- 1.) Three Phase Star To Delta Starter Suitable for 05 HP Motor including Power Contactor,Single phase Preventor,Timer switch etc. - 04 Nos. 2 )MCCB TP 25A 10 KA 'C' Series - 04 No. 3) Three Phase Star To Delta Starter Suitable for 03 HP Motor including Power Contactor,Single phase Preventor,Timer switch etc. - 01 Nos. 4 )MCB TP 16A 10 KA 'C' Series - 01 No. 3) Digital Amp Meter (0-30A) - 05 No. 4) Push button Start/Stop with Elements Set of 02 -05 Nos 5) On, Off, Trip indicating Lights LED type 220 V AC- 5 Set. (Set of three) .6) MCB SPN, 32 Amps 415v, 10 KA - 02 Nos .Make of Starter accessories :- L&T/ ABB/Legrand / Schneider. Make of MCCB/MCB Shall be MES Approved List Makes only.

Material and labour for construction of valve chamber of size 900 x 900 x 900 mm (internal dimensions built in brick masonary on 15 cm thick PCC foundation (1 : 4 : 8) type D-2 using 40 mm graded stone aggregate over 100 mm thick hard cor with brick work masonary in cement mortar 1:4 using 'B' class bricks and rendering in cement mortar 1: 4, 10 mm thick internally including exposed surfaces of external surfaces, MS cover made out of 3 mm thick MS sheet on angle iron framework made out of 40 x 40 x 3 mm duly embedded in PCC 1:2:4 type B-1 using 20 mm graded stone aggregate with hold fast made out of MS flat iron 25 x 6 mm x 300 mm long and 40 mm thick PCC coping 40 mm thick 1:2:4 type B-0 using 12.5 mm graded stone aggregate with handle hinges with locking arrangement & applying two coats of synthetic enamel paint over a coat of red oxide primer to all exposed steel surfaces complete all as specified and directed.

Material and labour for earthing complete with GI earth plate electrode 600x600x6 mm thick burried directly in ground (earth pit not less than 2.25 mtr deep below ground lavel) with top edge of the plate not less than 1.5mtr below normal ground lavel connected to Copper earth strip 32X6 mm by mean of bolts, nuts, check nuts and washer of brash all as shown in electrical plate No 5 connected to earthing test point all as specified or indicated including PCC pit and CI cover fullel with watering pipe, wire mess and copper lugs etc GI protection pipe 40 mm dia medium grade including testing on completion all as specified and directed.

Cleaning of underground water sump by draining / pumping of water removing / sludge from bottom removing algae and other growth from wall/floor/ roofs by high pressure cleaning method with rotary jets with approved detergent fubbing with vaccum cleaner sucking out all dirty water disinfecting the sump with chemical treatment (Chemical approved by FOA/WHO to make the sump totally clean bacteria free including painting MS steps manhole covers and suction pipe with synthetic enamel paint of 10000 gallons capacity at Sea Eagle-1 pump house and MAP pump House at INS Hamla

Cleaning of underground sump by draining / pumping of water removing / sludge from bottom removing algae and other growth from wall/floor/ roofs by high pressure cleaning method with rotary jets with approved detergent fubbing with vaccum cleaner sucking out all dirty water disinfecting the sump with chemical treatment (Chemical approved by FOA/WHO to make the sump totally clean bacteria free including painting MS steps manhole covers and suction pipe with synthetic enamel paint of 50000 gallons capacity at KV School INS Hamla.

Cleaning of underground sump by draining / pumping of water removing / sludge from bottom removing algae and other growth from wall/floor/ roofs by high pressure cleaning method with rotary jets with approved detergent fubbing with vaccum cleaner sucking out all dirty water disinfecting the sump with chemical treatment (Chemical approved by FOA/WHO to make the sump totally clean bacteria free including painting MS steps manhole covers and suction pipe with synthetic enamel paint of 40000 gallons capacity at Main pump house INS Hamla.

Material and labour for disconnecting & stopping of incoming/ washout and outgoing pipes by making suitable arrangements to avoid chocking of pipe line, removing total water from the tank and depositing the same in low laying areas all as directed cleaning the overhead tank from in side by using high pressure cleaning method with rotary jet with approved detergent rubbing/ scrapping wall / floor /ceiling with wet vaccume cleaner sucking out all dirty water and disinfecting the tank chemical treatment (chemical approved by FOA/WHO) to make sump totally cleaned and bacteria free including painting pit cover marking date of cleaning and next due and pipes (raising delivery wash out and over flow with sluice valves) including painting of pipe with two coats of synthetic enamel paint as per MES colour approved by EIC at site for RCC overhead tank 18 mtr stanging 50000 gallons at NSB INS Hamla.

Material and labour for disconnecting & stopping of incoming/ washout and outgoing pipes by making suitable arrangements to avoid chocking of pipe line, removing total water from the tank and depositing the same in low laying areas all as directed cleaning the overhead tank from in side by using high pressure cleaning method with rotary jet with approved detergent rubbing/ scrapping wall / floor /ceiling with wet vaccume cleaner sucking out all dirty water and disinfecting the tank chemical treatment (chemical approved by FOA/WHO) to make sump totally cleaned and bacteria free including painting pit cover marking date of cleaning and next due and pipes (raising delivery wash out and over flow with sluice valves) including painting of pipe with two coats of synthetic enamel paint as per MES colour approved by EIC at site for RCC overhead tank 18 mtr stanging 100000 gallons at main pump house Hamla.

Cleaning the shallow well at INS Hamla by dewatering the well with diesel engine pumping set and removing muds sludge/sediments, cutting the bushes, removing roots from inside cement plaster where ever required cement washing to the well walls, patch repairing by welding to MS top cover MS parts with one coat of rede oxide primer and two coats of synthetic enamel paints, cleaning vegetation upto 2 mtr around the well including disposal of sludge /sediments roots side MD land all as specified and directed.

Cleaning the static water tank of any capacity at INS Hamla by dewatering the well with diesel engine pumping set and removing muds sludge/sediments, cutting the bushes, removing roots from inside cement plaster where ever required cement washing to the well walls, patch repairing by welding to MS top cover MS parts with one coat of red oxide primer and two coats of synthetic enamel paints, cleaning vegetation upto 2 mtr around the well including disposal of sludge /sediments roots side MD land all as specified and directed.

M & L for repairing/overhauling of the Bio Gas plant pump set coupled with Squirrel cage induction motor 10 H.P by including Motor Rewinding and replacing of unserviceable parts like,gland packing, bearings, sleeves bushes, housing, shaft with gunmetal impeller including transporting to workshop & back and lath work for filling and grinding of shaft etc assembling the pump with new packing materials, nuts and bolts, washers, greasing, painting to the motor body metal cover complete all as specified and directed. (Note :- All spares suitable to existing pump set specifications only) (a) Pump set of 10 HP Capacity.

Material & Labour sand filling under floors or in foundation including watering & consolidation for cable cushioning all as specified and directed

Supply and laying HDPE pipes of pressure rating 6 Kg/Cm sq of size 32 mm laid in trenches complete all as specified and directed.

Supplying and laying unreinforced precast concrete cable cover class LV type 1, flat, size 250 x 150 x 40 mm complete all as specified and directed.

Laying only old unreinforced precast concrete cable cover class LV type 1, flat, size 250 x 150 x 40 mm complete all as specified and directed.

Supply and fixing, install, test and commissioning of LT Feeder pillar box indoor type totally enclosed with front and rear opening hinged doors and raised platform of suitable sizes weather dust vermin proof IP-54 protection CPRI approved, factory fabricated, cubical panel free standing type, made out of 2.00 mm thick CRCA sheet with locking arragement make as per CA, factory made powder coated as approved colour, aluminum bus bar suitable for 3 phase 4 wire LT, AC, 50Hz, 433 volts, 300 Amps rating capacity RYBN insulated with sleeved insulation complete with multifunctional meter LED type by showing Amps, volts, frequency etc along with suitable size of CT on outgoing, indicating lamp RYB , complete internal wiring with suitable size of PVC insulated copper conductor cable, including cable glands and lugs for incoming and out going cables as per required sizes, PCC platform made out of 1:2:4 type B1 and pedestal of 30 cm height from GL with suitable nut, bolts, washers etc., all as specified and directed for suitable to accomodate the following items including supply and fix following items and all as specified and directed by dismantling exisiting unserviceable LT panel complete with LT panel made by CPRI approved manufacturer Loc: Main Pump House Incoming [a] MCCB 4 pole 200 Amps with breaking capacity 35KA adjustable type with extended ter minals- 01No's Make: Legrand/Schneider/siemens/L&T Outgoings [b] MCCB 3 pole 63 Amps with breaking capacity 16KA adjustable type with extended terminals- 02 No's Legrand/Schneider/siemens/L&T [c] 25 HP Star delta starter with all connected connectors and timer-02 Nos.Make-:Legrand/Schneider/siemens/L&T (d) Digital AMMETER WITH C.T -03 Nos (e) Digital volt Meter-01 (f) LED RYB indiacator lamps-01/Set (g) Single phase preventor-02 Set Note-: The panel must have separate Bus bar chamber, cable chamber and proper spacing must be maintained between each chamber of panel as per IS . Note for the Ser Item Nos 63 to 68 - The lay out drawing of the panel shall be got approved by the contractor before panel fabrication from GE and shall be fabricated from CPRI approved manufacturer as per approved make of CA.

Supply and fixing, install, test and commissioning of LT Feeder pillar box indoor type totally enclosed with front and rear opening hinged doors and raised platform of suitable sizes weather dust vermin proof IP-54 protection CPRI approved, factory fabricated, cubical panel free standing type, made out of 2.00 mm thick CRCA sheet with locking arragement make as per CA, factory made powder coated as approved colour, copper bus bar suitable for 3 phase 4 wire LT, AC, 50Hz, 433 volts, 100 Amps rating capacity RYBN insulated with sleeved insulation complete with multifunctional meter LED type by showing Amps, volts, frequency etc along with suitable size of CT on outgoing, indicating lamp RYB , complete internal wiring with suitable size of PVC insulated copper conductor cable, including cable glands and lugs for incoming and out going cables as per required sizes, PCC platform made out of 1:2:4 type B1 and pedestal of 30 cm height from GL with suitable nut, bolts, washers etc., all as specified and directed for suitable to accomodate the following items including supply and fix following items and all as specified and directed by dismantling exisiting unserviceable LT panel complete with LT panel made by CPRI approved manufacturer confiring to IS:-8623-1993.. Loc Samagri Bhavan Pump House Incoming [a] MCCB 4 pole 63 Amps with breaking capacity 25KA adjustable type with extended terminals- 01No's Make: Legrand/Schneider/siemens/L&T Outgoings (b) MCCB 3 pole 40 Amps with breaking capacity 16KA adjustable type with extended terminals- 02 No's Legrand/Schneider/siemens/L&T (c) MCCB 4 pole 40 Amps with breaking capacity 16KA adjustable type with extended terminals- 01 No's Legrand/Schneider/siemens/L&T (d) 5 HP Star delta starter with all connected connectors and timer-02 Nos. Make: Legrand/Schneider/siemens/L&T (d) Digital AMMETER WITH C.T -03 Nos (e) Digital volt Meter-01 (f) LED RYB indiacator lamps-01/Set (g) Single phase preventor -02 Set Note-: The panel must have separate Bus bar chamber, cable chamber and proper spacing must be maintained between each chamber of panel as per IS .

Supply and fixing, install, test and commissioning of LT Feeder pillar box indoor type totally enclosed with front and rear opening hinged doors and raised platform of suitable sizes weather dust vermin proof IP-54 protection CPRI approved, factory fabricated, cubical panel free standing type, made out of 2.00 mm thick CRCA sheet with locking arragement make as per CA, factory made powder coated as approved colour, aluminum bus bar suitable for 3 phase 4 wire LT, AC, 50Hz, 433 volts, 300 Amps rating capacity RYBN insulated with sleeved insulation complete with multifunctional meter LED type by showing Amps, volts, frequency etc along with suitable size of CT on outgoing, indicating lamp RYB , complete internal wiring with suitable size of PVC insulated copper conductor cable, including cable glands and lugs for incoming and out going cables as per required sizes, PCC platform made out of 1:2:4 type B1 and pedestal of 30 cm height from GL with suitable nut, bolts, washers etc., all as specified and directed for suitable to accomodate the following items including supply and fix following items and all as specified and directed by dismantling exisiting unserviceable LT panel complete with LT panel made by CPRI approved manufacturer confiring to IS:-8623-1993.. Loc: NSV Pump House Incoming [a] MCCB 4 pole 200 Amps with breaking capacity 35KA adjustable type with extended terminals- 01No's Make: Legrand/Schneider/siemens/L&T Outgoings [b] MCCB 3 pole 63 Amps with breaking capacity 16KA adjustable type with extended terminals- 02 No's Legrand/Schneider/siemens/L&T [c] 25 HP Star delta starter with all connected connectors and timer-02 Nos.Make-:Legrand/Schneider/siemens/L&T (d) Digital AMMETER WITH C.T -03 Nos (e) Digital volt Meter-01 (f) LED RYB indiacator lamps-01/Set (g) Single phase preventor-02 Set Note-: The panel must have separate Bus bar chamber, cable chamber and proper spacing must be maintained between each chamber of panel as per IS .

Supply and fixing, install, test and commissioning of LT Feeder pillar box indoor type totally enclosed with front and rear opening hinged doors and raised platform of suitable sizes weather dust vermin proof made out of IP-54 protection CPRI approved, factory fabricated, cubical panel free standing type, made out of 2.00 mm thick CRCA sheet with locking arragement make as per CA, factory made powder coated as approved colour, aluminum bus bar suitable for 3 phase 4 wire LT, AC, 50Hz, 433 volts, 200 Amps rating capacity RYBN insulated with sleeved insulation complete with multifunctional meter LED type by showing Amps, volts, frequency etc along with suitable size of CT on outgoing, indicating lamp RYB , complete internal wiring with suitable size of PVC insulated copper conductor cable, including cable glands and lugs for incoming and out going cables as per required sizes, PCC platform made out of 1:2:4 type B1 and pedestal of 30 cm height from GL with suitable nut, bolts, washers etc., all as specified and directed for suitable to accomodate the following items including supply and fix following items and all as specified and directed by dismantling exisiting unserviceable LT panel complete with LT panel made by CPRI approved manufacturer confiring to IS:-8623-1993. Loc: Tower Pump House Incoming [a] MCCB 4 pole 100 Amps with breaking capacity 35KA adjustable type with extended terminals- 01No's Make: Legrand/Schneider/siemens/L&T Outgoings [b] MCCB 3 pole 32 Amps with breaking capacity 16KA adjustable type with extended terminals- 03 No's Legrand/Schneider/siemens/L&T [c] 7.5 HP Star delta starter with all connected connectors and timer-02 Nos.Make-:Legrand/Schneider/siemens/L&T (d) Digital AMMETER WITH C.T -03 Nos (e) Digital volt Meter-01 (f) LED RYB indiacator lamps-01/Set (g) Single phase preventor-02 Set Note-: The panel must have separate Bus bar chamber, cable chamber and proper spacing must be maintained between each chamber of panel as per IS .

Supply and fixing, install, test and commissioning of LT Feeder pillar box outdoor type totally enclosed with front and rear opening hinged doors with canopy sloped top projected and raised platform of suitable sizes weather dust vermin proof IP-54 protection CPRI approved, factory fabricated, cubical panel free standing type, made out of 3.15 mm thick CRCA sheet with locking arragement make as per CA, factory made powder coated as approved colour, aluminum bus bar suitable for 3 phase 4 wire LT, AC, 50Hz, 433 volts, 300 Amps rating capacity RYBN insulated with sleeved insulation complete with multifunctional meter LED type by showing Amps, volts, frequency etc along with suitable size of CT on outgoing, indicating lamp RYB , complete internal wiring with suitable size of PVC insulated copper conductor cable, including cable glands and lugs for incoming and out going cables as per required sizes, PCC platform made out of 1:2:4 type B1 and pedestal of 30 cm height from GL with suitable nut, bolts, washers etc., all as specified and directed for suitable to accomodate the following items including supply and fix following items and all as specified and directed by dismantling exisiting unserviceable LT panel complete with LT panel made by CPRI approved manufacturer confiring to IS:-8623-1993. Loc: in front of Saraswati Building Incoming: MCCB 4 pole 200 Amp with breaking capacity 35 KA adjustable type with exended terminals -01 Nos Make: Legrand/Schneider/siemens/L&T Outgoing [a] MCCB 4 pole 100 Amps with breaking capacity 25KA adjustable type with extended terminals- 01 No Make: Legrand/Schneider/siemens/L&T [b] MCCB 4 pole 63 Amps with breaking capacity 16 KA adjustable type with extended terminals- 02 No's Legrand/Schneider/siemens [c] MCCB 4 pole 63 Amps,breaking capacity 16 KA ,adjustable type with extended terminals and inbulit street light timer console (both options available i.e. auto and manual) - 02 Nos Legrand/Schneider/siemens/L&T (d ) Current Transformers-03 Nos (e) Multi functional Meter-01 (f) LED RYB indiacator lamps-01/Set Note-: The panel must have separate Bus bar chamber, cable chamber and proper spacing must be maintained between each chamber of panel as per IS .

Supply and fixing, install, test and commissioning of LT Feeder pillar box outdoor type totally enclosed with front and rear opening hinged doors with canopy sloped top projected and raised platform of suitable sizes weather dust vermin proof made out of 3.15 mm thick CRCA sheet, factory made powder coated as approved colour, aluminum bus bar suitable for 3 phase 4 wire LT, AC, 50Hz, 433 volts, 300 Amps rating capacity RYBN insulated with sleeved insulation complete with multifunctional meter LED type by showing Amps, volts, frequency etc along with suitable size of CT on outgoing, indicating lamp RYB , complete internal wiring with suitable size of PVC insulated copper conductor cable, including cable glands and lugs for incoming and out going cables as per required sizes, PCC platform made out of 1:2:4 type B1 and pedestal of 30 cm height from GL with suitable nut, bolts, washers etc., all as specified and directed for suitable to accomodate the following items including supply and fix following items and all as specified and directed by dismantling exisiting unserviceable LT panel complete with LT panel made by CPRI approved manufacturer confiring to IS:-8623-1993. Loc: SSK-47 C Road Incoming: MCCB 4 pole 200 Amp with breaking capacity 36 KA adjustable type with exended terminals -01 Nos Make: Legrand/Schneider/siemens/L&T Outgoing [a] MCCB 4 pole 63 Amps with breaking capacity 16KA adjustable type with extended terminals- 02 No's Make: Legrand/Schneider/siemens/L&T [b] MCCB 4 pole 40 Amps with breaking capacity 16 KA adjustable type with extended terminals- 04 No's Legrand/Schneider/siemens (c ) 320/5Current Transformers-02 Nos (d) Multi functional Meter-01 (e) LED RYB indiacator lamps-01/Set ( f) One spare chamber Note-: The panel must have separate Bus bar chamber, cable chamber and proper spacing must be maintained between each chamber of panel as per IS .

Supply and laying in repairs cable LT XLPE insulated and screened PVC bedded, galvanised steel strip armoured electric power cable (heavy duty) with stranded aluminium conductor, 1100 Volts grade of for the following sizes including taking up existing u/s LT cable 25 Sqmm 3.5 Core.complete all as specified and directed.

Supply and laying in repairs cable LT XLPE insulated and screened PVC bedded, galvanised steel strip armoured electric power cable (heavy duty) with stranded aluminium conductor, 1100 Volts grade of for the following sizes including taking up existing u/s LT cable 35 sqmm 3.5 core complete all as specified and directed.

Supply and laying in repairs cable LT XLPE insulated and screened PVC bedded, galvanised steel strip armoured electric power cable (heavy duty) with stranded aluminium conductor, 1100 Volts grade of for the following sizes including taking up existing u/s LT cable 95 sqmm 3.5 core complete all as specified and directed.

Supply and laying in repairs cable LT XLPE insulated and screened PVC bedded, galvanised steel strip armoured electric power cable (heavy duty) with stranded aluminium conductor, 1100 Volts grade of for the following sizes including taking up existing u/s LT cable 120 Sqmm 3.5 Core..complete all as specified and directed.

Supply and laying in repairs cable LT XLPE insulated and screened PVC bedded, galvanised steel strip armoured electric power cable (heavy duty) with stranded aluminium conductor, 1100 Volts grade of for the following sizes including taking up existing u/s LT cable 185 sqmm 3.5 core.complete all as specified and directed.

Supply and laying in repairs cable LT XLPE insulated and screened PVC bedded, galvanised steel strip armoured electric power cable (heavy duty) with stranded aluminium conductor, 1100 Volts grade of for the following sizes including taking up existing u/s LT cable 240 sqmm 3.5 core.complete all as specified and directed.

Dismantling exsting RCC & steel tubular poles with bracket & light and in lieu S&F 7 metre long hot dipped galvanised octagonal poles with top A/F 70mm bottom A/F 130 mm, made out of 3mm thick HT sheet alongwith base plate of size 220*220*12mm, including 1500mm long single arm bracket made out of 48mm dia, GI pipe, M20 in PCD 205mm, 700mm long and projected 100mm, "J" type EN8 grade set of 4 Nos foundation bolts alongwith templates, also including provision of the followings :- (a) MCB,SP,6A,230V, B series, 10KA mounted on and including 3mm thick plastic laminated sheet-01 No. (b) 4 way connector, bolt type having locking arrangement, weather proof and water proof control space : 01 No. Notes: (a) The rate quoted shall also be deemed to include the cost for provision of 50mm bore PVC pipe from cable trench to centre of the pole concrete of the pole concrete. (b) The earth work, RCC foundation reinforcement and form work will be measured and paid separately. (c) .quoted rate shall also be deemed to include for fixing of old light fitting retrived from dismantling. Make : BAJAJ Model BOP-7030 or its equivalent in Crompton/Philips / Wipro as approved by the GE.

M&L for mild steel TMT bars 6 mm to 8mm dia cut to length, bent to shape required, stirrups, spaces and binders and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified and directed.

M&L for RCC type B-1, 1:2:4 (nominal mix) using 20 mm graded stone aggregate as in footing, columns, post, pillars, piers, wall of culverts, suspended slabs, edges and struts etc complete all as specified and directed.

M&L for form work to sides of concrete footings, columns, posts, pillars, piers, edges and struts of rectangular or triangular shape for rough finished flat concretesurface complete all as specified and directed.

M & L in repairs for sub main wiring PVC copper cable 2.5 sqmm (02 Run & 01 Run of 2.5 sqmm) copper conductor 1100 Volt grade multi core multi stranded PVC insulated unsheated drawn through and including PVC conduit and accessories fixing on poles/ wall with clamps, nuts bolts etc from FRP box to street light fiting complete all as specified and direcetd

Supply installation, testing and commissioning of FAST ELECTRODE maintenance free Chemical Earthing of Dual Pipe Technology, each of 3 Meter long with Outer Pipe Diameter of 88mm (galvanised for 80-120 micron and wall thickness 1.80mm) and Inner Pipe diameter 48mm (galvanised for 80-120 micron and wall thickness 2.60mm). There shall be terminal of size 75 x 5.20mm for connection with two holes of 14mm diameter. FAST ELECTRODE shall be duly filled with the highly conductive, Non Magnetic, Non Corrosive material and duly sealed at both ends with lead terminal of 75x5.2mm at top. The ELECTRODE shall be of 'make' having approval of CPRI (Central Power Research Institute), Govt of India for a minimum short circuit current of 42 KArms for 1 Second with initial pick of 88.2 KA. The FAST ELECTRODE Earth Enhancing Compound (minimum 25Kg) shall be pored on alround the electrode. The chemical compound to be used shall be as per the manufacturer's instructions of 'Electrode' and as also certified by any BIB (Bureau of Indian Standards) accredited laboratory. Make : Fast Electrode/ U-Protec Earthing/ Shivangi Engineering Works or equivalent as approved by the GE. Notes:- (i) The contractor shall procure the above materials either directly from the manufacturer(s) or their authorised dealers only and shall produce the original purchase vouchers alongwith original manufacturer's test certificates and other authenticated documents in compliance of the provisions as mentioned in the above item. Also all the requisite testing as specified above, in relevant IS and as directed by the GE shall be got done by the contractor. Cost of all the above elements shall be deemed to be included in the contractor's quoted rates. (ii) Any additional quantity of Earth Enhancing Compound in case required to obtain the desired results, the same also be provided by the contractor without any additional cost to the Govt. and quoted rates of above item shall be deemed to include the above element also. (iii) Copper strip upto 7.5 meters included above quoted rates.

Supply and fixing in repair maintenance free battery 12 volt 150 Ah suitable for solar street light fiitng complete all as specified and directed

Supply and fixing in repairs highly efficient high power multi LED flood fitting 100 watts with pressure die cast aluminium housing reflector and enclosed with toughened glass IP66 complete prewired and connecting with 0.5 sqmm 3 core flexible wire including fixing arrangement on wall etc complete including dismantling of existing unserviceable flood light fittings complete all as specified and directed.

Supply and fix in repairs highly efficient high power 60 W LED street light fitting with pressure die cast aluminium housing reflector and enclosed with heat resistant toughened glass IP66 protection AC 240 Volts 50 HZ refractive lens with suitable electronic drive PF > 0.9 including taking exiting unserviceable street light fitting complete all as specified and directed.

Supply and fixing in repairs LED post top lanterns fitting made in cast aluminium spigot housing with decorative clear acrylic diffuser and IP65 protection upto 20 watt ,warm white complete all as specified and directed.

Surface dressing in soft/loose soil not exceeding 15 cm deep and cleaning of area complete all as specified and directed.

Suppy and fixing and installation of Retro fit Emission control device (RECD) for the DG set 250 KVA trolley mounted as per policy control of emission Emission limits (g/kW-hr) as per following:- NOx+HC≤4.0 CO≤3.5 PM 2.5≤0.2 Smoke limit (Light absorption coefficient,m-)≤0.7 Technology : ceremic filter DG set capacity : 380 KB Regegenerating time : 10 Mins Materials construction " SS304 Temperature indication Pressure indication PM Capture/PM reduction capacity 95% High heat resistence Easy to installed Maintainace twice a yearly with back purge Provide 2 outputs (RS285 & 4-20mA) for connectivity in PLC/DCS system Other Accessories: (a) User Manual (b) Warranty certificate

Supply and fix in replacement of FRP looping box of size 155x210x92 mm with connector, MCB 6 Amps, Din Rail, GI clamps made out of GI flat of size 25mm X 3 mm channel including making connections complete all as specified and directed.

M&L for preparation of old painted surfaces of pre-stressed concrete pole upto 11/9 mtr long by scarping old paint and applying two coats of cement base paint including numbering of pole with black oil paint painting the base of the pole in alternate black and yellow stripes each 30 Cm apart up to 1.5mtr height including marking of MES No with black paint on the pole complete all as specified and directed.

M&L for preparation of old painted surfaces of Steel Tubular pole upto 9 mtr long by scarping old paint and applying two coats of Aluminium paint including numbering of pole with black oil paint and painting the base of the pole in alternate black and yellow stripes each 30 Cm apart up to 1.5 mtr height including marking of MES No. with black paint on the pole all complete all as specified and directed.

M&L for straight through joint (epoxy) suitable for 3 ½ / 4 core up to 95 Sqmm size underground cable complete all as specified and directed.

M&L for straight through joint (epoxy) suitable for 3 ½ /4 core 95 to 240 Sqmm size underground cable complete all as specified and directed.

M&L for finding faults of LT UG cable XLPE of any size and any length by using computerised / primary current injection method / any other method as directed by the GE and locating fault, cutting and removing the faulty portion of the cable and jointing with suitable cable joint and testing after jointing complete all as specified and directed. Note: Joints shall be paid for separately.

M&L for secure/hanging of electrical XLPE/PVC cable/wires of any size on walls/ceiling with clamps, hooks, nuts , bolts and other accessories for electrical hyigen complete all as specified and directed.

Materials and labour for painting factory made powder coated as approved colour and servicing of LT panel with burnts wiring, cleaning of panel , lugs, glands of any size, and others connected accessories complete all as specified and directed.

Material and labour for street/security pole numbering complete all as specified and directed.

S&F LED bulb retrofit 15 Watt E27 base with flat surfase of reflection light should be fixed with silicon gel on both side to protect from water complete all as specified and directed.

Deduct Credit for Demolished/ Dismantled material Rs. (-) 119130.00 (Minus) as listed in Schedule of Credit Note1: Tenderers will not quote against this item being a tentative amount to be considered to arrive at the 'Contract Sum' Note 2:- The tenderer must keep in mind when quoting rates against items out in multiple store house having height 4 mts to 7 mts. Necessary scaffolding and saftey measures required during execution of work are including in this items.

Shree Ayyappa Engineering

M/s Mukesh Engineers

R J ENTERPRISES