PROVISION OF GUARD ROOM AT EP SCHOOL PROVISION OF LABORATORY AT FCM, PROVISION OF SEPARATE CHANGE ROOM AND WASH ROOM FOR WOMEN AT ARN AND PROVISION OF TOILET BLOCK IN TRG AREA A OF F COMBAT AT CME PUNE

Amount

NOTE: Schedule ‘A’ Part I to X are Prepriced by MES. Bidders shall insert their lumpsum amount in the Green coloured field under Col-13 only.

Total amount of Sch 'A' Part-I (Building Works)

Total amount of Sch 'A' Part-II (Internal water supply)

Total amount of Sch ‘A’ Part III (Internal Electric Supply)

Total amount of Sch ‘A’ Part IV (External Water Supply)

Total amount of Sch ‘A’ Part V (External Electric Supply)

Total amount of Sch 'A' Part-VI (ROAD, HARD STANDING, PATH AND CULVERT)

Total amount of Sch 'A' Part-VII (Sewage Disposal)

Total amount of Sch ‘A’ Part VIII (Excavation, Earthwork & Site Clearance)

SCH 'A PART IX (Miscellaneous B/R and E/M works) Note: This schedule is not pre-priced by MES and the rate indicated as "Rs 0.00" under Col 6 signifies this fact only

(Internal Water Supply)

S & F brass chromium Angular stop cock (one way) with wall flange of 15mm bore capstan head complete all as specified and directed by Engineer-in-charge. Make - Jquar Code No. CON- 059KN or equivalent approved make indicated in list of makes in tender.

S & F brass CP pillar tap swan neck with 450mm long braided hose chrome finish complete all as specified and directed by Engineer-in-charge. Make - Jaquar Cat No.Code No CON-127BKN or equivalent approved make indicated in list of makes in tender.

S & F brass chromium Angular stop cock (two way) with wall flange of 15mm bore capstan head complete all as specified and directed by Engineer-in-charge. Make - Jaquar or equivalent approved make indicated in list of makes in tender.

S & F overhead shower 100 mm dia, round shape single flow (ABS Body Chrome plated with grey face plate ) with Rubit cleaning system complete fixed to ceiling all as specified and directed by Engineer-in Charge. Make - Jaquar Cat No. OHS-1989 or equivalent approved make indicated in list of makes in tender.

M & L 100 mm dia stainless steel grating with or withont hole for waste pipe including jointing to nahani trap/ floor trap complete, all as specified and directed .

S & F 15 mm bore bib tap, 2 in 1, brass chromium plated with wall flange, fancy type with long shank and crutch handle, screwed down, screwed for iron pipe complete all as specified. Make : Hindware (Cat No : F200004FT) or equivalent approved make indicated in list of makes in tender.

S & F 15 mm bore, 3 way brass chromium plated Laboratory tap screwed down, screwed for iron pipe complete all as specified and directed. Make : Chancellor (Cat No : SHGUN101) or equivalent approved make indicated in list of makes in tender.

(Internal Electric Supply)

S & F exhaust fan, with louvers, single phase, heavy duty, PVC, 250 mm sweep, including fixing of mounting frame in the round hole cutting in the wall/ window, by means of rugged bolts, nuts and washers etc, including three core copper conductor flexible cord of 0.5 Sqmm cross sectional area of required length from ceiling rose to the porcelain connector block of the exhaust fan complete all as specified and directed. Cat Part No : Havells Ventil Air - DX White or equivalent approved make indicated in list of makes in tender.

S & F LED tube light fitting 20 watt wall mounted LED batten extruded aluminium heeat sink provided for efficient heat dissipation with polycarbonite diffuser & integrated electronic driver etc. complete including all accessories internally prewired and including connecting up with twin core twisted flexible copper conductor cable with suitable size from ceiling rose to connector all as specified and directed. Make: Havells Cat Part No ENDURALINEARNEOBS20WLED865SPCWH or equivalent approved make indicated in list of makes in tender.

S & F lamp holder, PVC/Polycarbonate type with back plate suitable for batten fitting including supply and fixing LED Bulb 12 Watt 230 Volt complete all as specified and directed.

S & F surface mounted 15 W LED ceiling surface light Aesthetically designed 1x1, LED flat panel for surface mounting which provides soft-light and glare free symmetrical illumination complete all as specified and directed. Make: Havells Cat Part No PLUTOSURFACE1X1PLS15WLED840S or equivalent approved make indicated in list of makes in tender.

Supply and fix LED Bldg Security light fitting, environmental friendly,suitable for operation over voltage range of 140 to 270V 45 W duly housed in pressure die cast alluminium housing heat resistance toughned glass with frame of top opening inbuilt driver,confirming to IP 66 protection better optics for uniform distribution cool day light output including impact resistance IK07 with 10Kv inbuilt surge protection device fixing on pole/building with and including GI pipe bracket of 40mm dia medium grade, bend to shape of approx length upto 1.2 m incl 2 nos MS clamp of flat iron of 40x5mm complete with nut, bolt,washers including connecting up all as specified and directed. Make: Havells Cat Part No-ENDURAPEARLNEOSL45WLED757PASYTOPC or equivalent approved make indicated in list of makes in tender.

Supply and fix MCB SPN 40A, 10 kA, C series, Amps 230 Volts complete all as specified and as directed by Engineer -in-charge

Supply and fix MCB SP 6-32A, 10 kA, C series, Amps 230 Volts complete all as specified and as directed by Engineer -in-charge

S &F fan 1200mm sweep, suitable for 230V 50Hz BEE 5 star rating including necessary connection complete all as specified and directed

(External Water Supply)

M & L for cutting existing GI water main 50 mm dia in position for inserting tee/specials for branch connection of 25mm size incl joints, excavation, earth work in any strata complete all as specified and directed .

M & L for cutting existing GI water main 40 mm dia in position for inserting tee/specials for branch connection of 25mm size incl joints, excavation, earth work in any strata complete all as specified and directed .

M & L for cutting existing CI water main 50 mm dia in position for inserting tee/specials for branch connection of 50mm size incl joints, excavation, earth work in any strata complete all as specified and directed .

(External Electric Supply)

Supply & Laying DWC (Double Wall corrugated) HDPE pipe ISI marked confirming to IS:16205 (Part-24) of outer dia of 77 mm and inner dia 63 mm polyethylene including coupler and bend with smooth internal and profiled external surface for non pressure under ground cable complete all as specified and directed by Engr-in- Charge. Make : REX POLYEXTRUSION LTD or equivalent make as approved by GE.

Supply & Laying DWC (Double Wall corrugated) HDPE pipe ISI marked confirming to IS:16205 (Part-24) of outer dia of 50 mm and inner dia 38 mm polyethylene including coupler and bend with smooth internal and profiled external surface for non pressure under ground cable complete all as specified and directed by Engr-in- Charge. Make : REX POLYEXTRUSION LTD or equivalent make as approved by GE.

M & L for Earthing complete with galvanised steel earth plate electrode 600 x 600 x 6.3 mm thick, buried vertically in ground (Earth pit not less than 2.25 metres deep below normal ground level and top edge of the plate not less than 1.5 m below ground level), connected to and including Galvanised steel earthing wire 4mm dia by means of bolts, nuts & checknuts and washers etc; GI pipe 15 mm dia medium grade pipe for protection of G.I earth wire, both to be provided to the extent of 7.5 metres, all as shown on electrical plate No 3 of MES SSR-2009 Part-I, other end connected to electrical main switch board (inside the bldg) GI protection pipe buried in ground, laid under floors/plinths or fixed on walls or concealed in walls etc; with provision of mixture of charcoal dust & common salt packed upto minimum 150 mm all around the earth plate , including PCC (1:2:4) type B-1 earth pit with M.S angle iron frame, cast iron cover with locking arrangement, with G.I 20 mm dia medium grade pipe and M.S funnel with wire mesh for watering arrangement, including necessary excavation and earth work in any type of strata & testing on completion.

(Sewage Disposal)

S & F 30 users readymade RCC hume pipe septic tank 106cm dia and 243cm long over and including PCC platform 75mm thick PCC (1:5:10) type E-2 (using 40mm graded stone aggregates) & 300mm thick approved moorum filling below PCC, 100mm dia PVC vent type with cowl at top, connectors to inlet and out pipes, all as specified and shown on drawing No. CEPZ/91/TD/47M Sh 1/1/ of 16/12/91 including excavation in hard/ dense soil, RFR and removal of soil.

S & F 10 users readymade RCC hume pipe septic tank 60cm dia and 243cm long over and including PCC platform 75mm thick PCC (1:5:10) type E-2 (using 40mm graded stone aggregates) & 300mm thick approved moorum filling below PCC, 100mm dia PVC vent type with cowl at top, connectors to inlet and out pipes, all as specified and shown on drawing No. CEPZ/91/TD/47M Sh 1/1/ of 16/12/91 including excavation in hard/ dense soil, RFR and removal of soil.

M & L for soakage, well including excavation in hard / dense soil, foundation in PCC (1:5:10) type E2, walls brick work in CM (1:6) , RCC (1:2:4) type b1 slab covers, filling with brick bats, complete of size 2.01X1.6X2.0 mtr all as specified and shown on drawing No CEPZ/90/TD/13 Sh 1/1 dated 19.07.1990.

SHINDE DHEERAJKUMAR SIDRAM