Construction of community hall at Farkha village

Amount

Earth work in excavation by manual means over areas (Exceeding 30 em and upto 1.5 mtr in depth, 1.5 mtr in width as well as 10 sqm. on plan) including disposal of excavated earth upto 1 mtr from cutting edge, disposed earth to be levelled and neatly dressed in : All kinds of Soil

Providing and Laying of dry-stone soiling of any thickness in horizontal level, hand packed including cost of stone.

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level. 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 40mm nominal size). Using crushed Stone:

Random Rubble masonry with hard stone from nallah in foundation and plinth including levelling up with cement concrete 1 :6:12 ( 1 Cement: 6 coarse sand : 12 graded stone aggregate 20mm nominal size) at plinth level with A cement mortar 1:6 (1 Cement: 6 coarse sand)

Dry random rubble masonry with hard stone in foundation and plinth: Using nallah stone without bond stone

Providing and laying damp-proof course 50rnm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size is (A) Crushed

Providing and fixing upto floor five level precast cement concrete solid blocks including hoisting and setting in position with cement mortar 1:3 (1 cement : 3 coarse sand), cost of required centring, shuttering and complete 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20mm nominal size) (A) Crushed

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutmen"ts, posts ans sturts, etc. upto floor five level excluding cost of centring, shuttering, fmishing and reinforcement. 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded crushed stone aggregate 20mm nominal size)

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete.Thermo-Mechanically Treated bars.Complete job.

Centring and shuttering including strutting, propping etc. and removal of form for: for column

Centring and shuttermg including strutting, propping etc. and removal of form for· Lintels, beams, plinth beams, girders, bressumers and centilevers.

Centring and shuttering including strutting, propping etc. and removal of form for: suspended floor

Centring and shuttering including strutting, propping etc. and removal of form for: edge of slab below 20cm

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. Layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering lead upto 50m and lift upto 1.5m.

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately):Second class kail wood

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows including lSI marked M.S. pressed Butt hinges bright finished of required size with necessary screws excluding panelling which will be paid for separately,al! complete as per direction of engineer- in charge. Rate for thickness of shutter in 35 mm per sqm (Second kail wood ).

Providing and fixing glazed shutters for doors, window and clerestory windows using 10kg/sqm (4mm thick) float glass panes including lSI marked M.S. pressed butt hinges bright finished of required size with necessary screws. (Rate for thickness of shutters is 30 mm per sqm)

French spirit polishing with Two or more coats on new works including a coat of wood filler

Providing and fixing local traditional ornamental shingstak Including polishing all complete job

Steel work in built up tubular round, square or rectangular including cutting , hoisting , fixing in position and applying a priming coat of approved steel primer including welding and bolting with special shaped washers etc.complete. Hot finished welded type tubes

Providing corrugated G. S. sheet roofing including vertical/ curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G. I limpet washers or with G. I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape whereever required. 0.63mm thick with zinc coating not less than 27 5gm/m2

15mm thick Cement plaster on the rough side of half single brick wall of mix: 1 : 4 ( 1 cement : 4 coarse sand).

6mm cement plaster to ceiling of mix 1 : 3 (1 cement:3 fine sand)

Providing and applying white cement based putty of average thickness 2 mm, of approved brand and manufacture, over the plastered wall surface to prepare the surface even and smooth complete.

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade New work (two or more coats) over and including priming coat with cement primer

Providing, fixing and applying plaster of paris (POP) false ceiling consisting of frame work made with 50mm sq M.S. tubes of 18 G thickness as main runner at 600 mm c/c both ways, suspended/ supported with M.S. flats 25x4 mm from existing R.C.C. slab including providing and fixing expanded metal of size 5.25mmx1.25mm thickness welded to main runner and applying POP (calcium sulphate semihydrate variety)to the expanded metal of thickness not less than 1 Omm finished smooth to line and level including necessary supports scaffolding etc. as required and also including applying a coat of red oxide zinc chromate primer over the M.S. fiame workand suspenders complete.

Carraige charge of sand and bajree average lead upto 10km by mechanical transport.

carriage charge of Stone average lead upto 25 km by mechanical transport.

Wiring for light point 6amp socket/exhaust fan point / call bell point /with 1.5 Sq.mm PVC FR insulated copper conductor single core in surface/recessed medium class PVC conduit, suitable size MS box and earthing the point with 0.75 Sq.mm. FR PVC insulated copper conductor single core cable as required.

Wiring for 16amp socket outlet with 2.5mm FR PVC insulated copper conductor cable in existing recessed PVC conduit including sheet as required.

Supplying and drawing circuit wire for light and 6/16amp socket outlet with 4.0sqmm FR PVC insulated copper conductor single core cable in the recessed/surface PVC conduit pipe as required.

Supplying and fixing of 25mm PVC conduit capping along with accessories in surface/recessed including cutting the wall and making good the same in case of recessed conduit as required.

Supply and fixing of a 10amp 240 volt single pole grid plate mounted switch indicator with molded copper plate including recessed 2 inch M.S box complete as required including connection.

Supply and fixing of combined 3 pin 240 volt 10amp socket outlet with safety shutter and 10amp 240 volt single pole mounted in recessed including M.S box complete as requird..

Supply and fixing of combined 3 pin 240 volt 20amp socket outlet with safety shutter and 20amp 240 volt single pole mounted in recessed including M.S box complete as requird

Supply and fixing of following single pole and neutral sheet steel MCB distribution board 240 volt on surface recess complete with tinned busbar neutral link earth bar, tin bar, detachable glaud plates, double door interconnected including pointing etc as required 16 way double door SPN.

Supply and fixing of the following light fixtures including all accessories like electronic ballasts coms etc, complete as required concealed/Tube lightning 20 watt 3000k, round LED Luminaries as per Philips

Supply and fixing of miniature circuit breaker of following poles in the existing MCB DB completed with connections testing and commissioning etc, as required. A) Single pole 6/10/20 Amp

Supply and fixing of miniature circuit breaker of following poles in the existing MCB DB completed with connections testing and commissioning etc, as required. B) Double pole 40 Amp

Junction box 3 inches 250 grams G.I with holes for connection, submersed in concrete with connections as required.

3 modular plate

6 modular plate

Exhaust fan 150 mm

Providing and fixing ceiling fan of approved brand philips, crompton,havels etc. complete jobs.

Supply and fixing of 600x600mm panel light wattage 36W and minimum 80Lumens per watt for conceal ceiling Wipro, Philips, or equivalent make

Providing and laying/ fixing Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 13755 of NITCO, ORIENT, KAJARIA, SOMANY or equivalent make in colour shades except White, Ivory, Grey, Fume Red, Brown laid on 20 mm thick bed of Cement Mortar 1: 4 (1 cement: 4 coarse sand) including pointing the jointswith white cement and matching pigments etc., complete.

Providing and fixing 1st quality ceramic glazed tiles conforming to IS :·13753 of minimum thickness 5 mm of approved make like NITCO, ORIENT, SOMANY KAJARIA, or equivalent make in all colour, shades except begundy, bottle green, black of any size as approved by Eningeerin-Charge in skirting, risers of steps and dados over 12 mm thick bed of Cement Mortar 1:3 ( 1 cement: 3 coarse sand) and jointing wtih grey cement slurry @3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete.

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern and CP flush with fittings, C. I./M.S. brackets 40mm bend diameter flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete including painting of fittings and brackets, cutting and making good the walls and floors ,...- wherever required: W.C. pan with lSI marked black solid plastic seat and lid, with white vitreous china flushing cistern & C.P. flush bend.’

Provding and Fixing Flow trap of PVC

Providing and fixing wash basin with C. I./M.S. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required: White Vitreous China wash basin size 660x460 mm with a pair of 15 mm C.P. brass pillar taps with elbow operated levers

Providing and fixing mirror of superior glass( of approved quality) and of required shape and size with plastic . moulded frame of approved make and shade with 6 mm thick hard board backing Rectangular shape 1500x450 mm

Proving and fixing soil , waste and vent pipes a)100 mmdia PVC

Proving and fixing soil , waste and vent pipes b)75mm dia PVC:

Providing and fixing of plain bends of required degree a)100mm dia PVC=

Providing and fixing of plain bends of required degree b)75mm dia PVC

Providing and fixing of PPR pipe complete with PPR fitting and damps incl. cutting and making good the wall etc internal complete 15mm dia pipe

Providing and fixing of PPR pipe complete with PPR fitting and damps incl. cutting and making good the wall etc internal complete 20mm dia pipe

Providing and fixing brass toilet paper holder including of cost of wooden PVC etc

Providing and fixing brass bib cock of approved quality. 15 mm nominal bore

Providing and fixing of Soap dish (C.P. brass) with bracket etc.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank lSI : 12701 marked indicating the BIS License No. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank [Sintex, Electroplast, Star, Lotus or equivalent having valid lSI license].

Providing and fixing C.P. brass close hole basin mixer piller tap of approved quality and make 15 mm nominal bore of standard back type.

Providing and fixing C.P Brass angle valve for basin mixer and Geyser

Providing and Fixing C.P Jalli of approved brand

M/S GURMET TUNDUP GOVT CONTRACTOR

M/S TUNDUP NAMGAIL

M/S NISSAR AHAMED