Supply,Installation,testing and Commissioning of cold room in CRC kitchen,ACTREC

Amount

SITC of Cold Room refrigeration unit

Supply, installation testing & commissioning of new cold room with following specification : 1.Dimensions (External) width 12 ft X length 16ft X height 10 ft. 2 Ambient Temperature 43*C 3 Room Temperature +2 to +8º C 4 Product to be stored : Kitchen Items like Vegetables, fruits etc 5 Product incoming temperature +25 6 Door openings per Hrs 1 Times for three minute 7 Pull down in Hr 24 Hr 8 Insulation Pre-tab modular PUF panels (ECO- Friendly) 9 Thickness of Insulation 60 mm Thick 10 Lamination of Panels (Wall & Celling) PPGI Inside and Outside 11 Floor Insulation 50mm thick PUF Slab with Kota Tiles Finish 12 Door Details Swing Door with PPGI inside and PPGI outside 60mm thick. 34” x 78” clear opening Single leaf Door with Heater Door Accessories: Posi seal closure, knob. – One no, Manual Lock is also required. 13 Refrigeration systems Refrigerant: R404A Split type, AIR cooled, 14 NO. of refrigeration systems 2 Nos. one working one stand by 15 Refrigeration capacity for each system 18,000 BTU/Hr each 16 Compressor Type Hermetic Compressor 17 Power Supply Requirement 230 V/ 1 PH/ 50Hz 18 Digital Temperature indicator cum controller Provided. along with timer. 19. Shall have timer controller for auto change over of units 20 Light 1 No’s 21 sufficient length of copper piping with cable tray, electrical wires of the rated capacity. Installation site of condenser units is approx. 30 feet away from the cold room/evaporator unit. 22 wall mounting bracket for condenser units 23. Proper drain pipe with insulation with sufficient length.

Supply, fabrication and installation of SS perforated storage Rack for cold room as per site requirement. AISI SS 304 Material For Durability And Long Life. 18 SWG Shelves For Higher Strength.