SPECIAL REPAIR AND ADDITION ALTERATION TO OUTER SECURITY WALL OF RANGE OFFICER COLONY BALASORE

Amount

NOTE (Applicable for all items) :- The bidders/contractors are advised to read tender document & all corrigendum / amendments and General conditions of contracts before entrying/quoting the rates.

Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead.

Dismantling barbed wire or flexible wire rope in fencing including making rolls and stacking within 50 metres lead.

S&F Fencing with angle iron post placed at required distance embedded in cement concrete blocks, with horizontal wires, of barbed wire weighing 9.38 kg per 100 m (minimum), between the two posts fitted and fixed with G.I. staples, turn buckles etc. complete.With G.I. barbed wire @ 75 mm spacing complete all as directed.

Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length ( total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron 'Y' shaped placed 2.4m or 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in-charge, with reinforced barbed tape(R.B.T.) / Spring core (2.5mm thick) wire of high tensile strength of 165 kg/ sq.mm with tape (0.52 mm thick) and weight 43.478 gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately) complete all as directed.

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.

Demolishing brick work built in cement mortar manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead complete all as directed.

M&L for brick work with clay flyash F.P.S. (non modular) brick of class designation 7.5 built in Cement mortar (1:4) all as directed by Engineer -in-Charge.

All as per Item Sl No. 7 above but except bricks (using old size bricks obtained from Item Sl No - 6 above)

M&L for 15 mm thick cement plaster of CM (1:6) complete all as specified and directed.

M&L for 6 mm thick cement plaster of CM (1:3) complete all as specified and directed.

M & L for Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat weather coat paint applied @ 1.67 ltr/10 sqm over and including priming of one coat of exterior primer applied @ 2.20 kg/10 sqm) including preparation of surface.

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead for coping and column complete all as specified and directed.

M&L plain cement concrete 1:3:6 (1 cement : 3 coarses and derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) in posts, struts, string or lacing courses, parapets, coping, bed blocks, anchor blocks etc. excluding the cost of centering, shuttering and finishing complete all as specified and directed.

M&L for Reinforced cement concrete work in beams, bands, staircases and spiral stair cases, copping etc. excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) complete all as specified and directed.

M&L for Steel reinforcement of Thermo-Mechanically Treated bars of grade Fe-500 D or more. for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete

M&L for Centering and shuttering including strutting, propping etc. and removal of form for Columns, Pillars, Piers, Abutments, Posts and Struts complete all as specified and directed.

M&L for Centering and shuttering including strutting, propping etc. and removal of form for Edges of RCC band and breaks in floors and walls Under 20 cm wide complete all as specified and directed.

M&L for Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position using structural steel etc. as required : In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.

M&L Painting New Steel work with Synthetic Enamel Paint (Grade-I) to give an even shade. Two coat applied @ 0.90 ltr/10 sqm over an under one coat of red oxide primer applied @ 0.80 ltr/10 sqm of approved brand and complete all as specified and directed.

R.B.Construction

M/s MANIK SETHI

bholanath bera

ELECTRO COMMERCIAL CO

J B NATH AND SON

DS ENTERPRISES

RANA ENTERPRISES

Bidder Name

RANA ENTERPRISES

DS ENTERPRISES

J B NATH AND SON

R.B.Construction

ELECTRO COMMERCIAL CO

MS SUBHAM ENGINEERING AND CO

bholanath bera

M/s MANIK SETHI