Providing And Installation of Motor control Panel and allied Works at P.H. No. High Lift of Dhalani Ground water based W/S Scheme under EMSD-I, PHE Dte.in 24Pgs(N).

Amount

Dismantling the existing defective starter after disconnection of all electrical connection by deploying skilled personnel & kept at site all complete.

Outgoing: i) MPCB (20-25Amps)------------- 02 no. ii) Motor Protection Relay(0.5-80)A..........02 no. iii) Contractor (25 Amp)-------------------- 04 no. iv) Contractor (18 Amp)-------------------- 02 no. v)Capacitor (6 KVAR)--------------------- 02 no. vi)Contactor for capacitor(12 Amps)----------- 02 no. vii)TP MCB for capacitor (16 Amps) --------------- 02no.

viii)Star-Delta Timer (3-60 Sec) ----------- 02 no. ix)On-Delay timer ....02Nos x) SP MCB for Contactor (6 Amp) --------- 04 no. xi)ON/OFF/Trip Indicator -------- 06 nos xii) Start/Stop Push Button--------- 02nos.

For Chlorinator: i) TP MCB (16 Amp) -----01no. ii) Over Load Relay (0.63 - 1 Amp) ----01 no. iii) Contactor(9Amp) ------01 no. iv) Water Level Controller ------- 01 no. v) ON/OFF/Trip Indicator ------ 03 nos. vi)Start/Stop Push Buttom------- 02 nos.

For Spare Feeder: i) TP MCB ( 16 Amp)---------- 01 no.

Installation of the above Panel on as in item no. 2 wall with complete cable connection as per direction supplying all required materials and commissioning the same as per satisfaction of E.I.C

Supply, Delivery at site Single core 1.1 KV Grade 6 Sq. mm. PVC insulated Copper flexible Cable as per Relevant IS. NB: Cable to be supplied as per sire requirement. ( Make: GLOSTER/NICCO/Polycab / Havell’s/Mescab/any other approved make)

Laying of cable as in item no. 4 on wall/surface including S&F of MS saddles with earthing attachment in 10 SWG GI(HOT DIP) wire making holes etc. as necessary mending good damages and paint all complete.

Finishing the end of cable by crimping method including supplying of suitable size Al. thimble, tapes, jointing materials & supplying and fixing suitable type compression gland for above cable including supply of brass gland, rubber ring etc.

Supply & delivery at site of automatically controlled plunger type chlorinator Dosing pump ( Make:Swelore / Positive/any other approved make) with Flow Rate 100 LPH and Max pressure of 10Kg/Cm2 with necessary accessories with storage Tank of dosing solution of 100 Ltr. Capacity and the prime mover to be coupled with pump of 0.5HP 3 Phase suitable RPM squirrel cage TFC induction Motor Complete set. (Make:- KEC/CGL /any other approved make)

Installation & commissioning of above supplied chlorinator & drawing of power line by supplying of necessary wire and continuous earthing connected to auto/manual panel.This includes the cost of making necessary brick foundation base with neat cement finish by supplying all required materials and testing the entire set as per direction of E.I.C.

Add: GST @ 18%

Add: LW Cess @ 1%

KUSHANI ENTERPRISES (BID ID -6349716)

DEBJYOTI BASU (BID ID -6346836)