REPAIR AND MAINTENANCE OF EXTERNAL ELECTRIFICATION AND OTHER ALLIED WORKS AT JINDRAH UNDER GE ARMY DHAR ROAD UDHAMPUR

Amount

Excavation in trenches not exceeding 1.5 meter wide and not exceeding 1.5 meter in depth getting out in soft/loose soil for stay assembly/laying of cable/errection of poles etc complete all as specified and directed.

All as per item No. 1 above but depth exceeding 1.5 m and not exceeding 3 m complete all as specified and directed.

Returning, filling in including spreading, levelling, watering and well ramming in layers n.exc 25cm thick.

Removal of excavated material n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point.

M&L for PCC (1:4:8) type D-2 using 40mm graded aggregate as in foundation for filling in, mass concrete for foundation of Pole, Transformer, Panel board, stay, post top lantern, repairs to road cutting, drain, path etc complete all as specified and directed.

M&L for PCC (1:3:6) type C-2 using 40mm graded aggregate as in foundation for filling in, mass concrete for foundation of Pole, Transformer, Panel board, stay, post top lantern, repairs to road cutting, drain, path etc complete all as specified and directed.

M&L for PCC (1:2:4) type B-1 using 20mm graded aggregate as in coping of new pole / reconstruction old damaged copings etc, including necessary form work complete all as specified and directed

M&L for dry Sand cushioning in trenches for protection of cable including watering and consolidation all as specified and directed. Note: Punned thickness shall be considerd for measurment purpose

M&L for well burnt brick sub class B old size laying in trenches perpendicular to axis of the cable complete all as specified and directed.

Supply and laying in trenches/Floor or fixed to Pole/Wall GI pipe light grade with fitting of size 40 mm bore for protection of cable including dismantling existing pipe complete all as specified and directed by the Engineer-in-Charge.

Supply and laying in trenches/Floor or fixed to Pole/Wall GI pipe light grade with fitting of size 50 mm bore for protection of cable including dismantling existing pipe complete all as specified and directed by the Engineer-in-Charge.

Supply and laying in trenches/Floor or fixed to Pole/Wall GI pipe light grade with fitting of size 80 mm bore for protection of cable including dismantling existing pipe complete all as specified and directed by the Engineer-in-Charge.

M&L for cutting of PCC/Hard standing/WBM road not exceeding 20 cm in width not exceeding 30 cm in depth for passing of LT cable and making good of disturbed surface to match with the existing surfaces by using old and new material i.e bitumen/PCC (1:3:6) type C-2 complete all as specified and directed .

Taking out existing worn out/old PVC insulated cable in 3.5 core of 185 sqmm to 95 Sqmm size of 1100 Volt grade in pieces from trenches making loop for transportation and removal from site after taking proper shut down from MES competent staff complete in all respect and as directed at site.

Taking out existing worn out/old PVC insulated cable in 3.5 core of 50 sqmm to 35 Sqmm size of 1100 Volt grade in pieces from trenches making loop for transportation and removal from site after taking proper shut down from MES competent staff complete in all respect and as directed at site.

Taking out existing worn out/old PVC insulated cable in 4/2 core of 16 sqmm to 10 Sqmm size of 1100 Volt grade in pieces from trenches making loop for transportation and removal from site after taking proper shut down from MES competent staff complete in all respect and as directed at site.

Material and labour for fixing or passing through pipe, laid in trenches or fixed to pole/wall or fixed to LT panel board, 1100 volts grade heavy duty cable with PVC insulated stranded aluminium conductor served with inner sheathing of PVC tape, armoured with galvanised steel wire or tape and overall PVC sheathed 35 Sqmm 3.5 core with required aluminium cable lugs all as specified and directed. Make of Cable : Havells, Polycab, Gloster,Finolex

All as per item No. 17 above but size 185 sq mm 3.5 core.

All as per item No. 17 above but size 120 sq mm 3.5 core

All as per item No. 17 above but size 95 sq mm 3.5 core

All as per item No. 17 above but size 50 sq mm 3.5 core

All as per item No. 17 above but size 16 sq mm 4 core

All as per item No. 17 above but size 10 sq mm 2 core

Taking out existing worn out/old PVC insulated cable in 3 core of 95 Sqmm size of 11000 Volt grade in pieces from trenches making loop for transportation and removal from site after taking proper shut down from MES competent staff complete in all respect and as directed at site.

Supply & laying HT XLPE Insulated screened aluminium stranded conductor cable PVC bedded galvanized strip armoured heavy duty 11 KV cross sectional area 95 Sqmm 3 Core (Earthed)conforming to IS 7098 laid in duct/trenches complete all as specified and directed Make of Cable:Havells, Polycab, Gloster,Finolex

Supply and laying or fixing or passing through pipe from junction box to street light connection, 1100 volts grade heavy duty cable with PVC solid insulated aluminium conductor served with an inner sheathing PVC tape and over all PVC sheathed 6 Sqmm 2 core nominal cross section complete all as specified and directed.

S&F sheet metal enclosure box made out of 3.15 mm thick CRCA sheet with powder coated paint (CPRI approved) double door outdoor type including solid aluminium bus bar of capacity 400 Amp 4 Nos strip alongwith MCCB 250 Amp, 4 pole, 25 KV with locking arrangements, enclosure box to be fixed on plinth foundation 1:2:4 and 150 mm above ground level including MS angle/ channel consisting of necessary fixing arrangements for incoming & out going cables with cable glands, lugs, nut, bolts, washers and fixing arrangement , PCC work including necessary flat iron clamps with nuts, bolts & washers and Powder coated all as specified and directed. Make of MCCB - Legrand/L&T/Schenider.

S&F Cable jointing kit for 11 KV (Earthed) grade cable for heat shrink type end joint out door type complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 95 to 120 sqmm Make : Raychem/Denson/M Seal/ Birla 3M

S&F Cable jointing kit for 11 KV (Earthed) grade cable for heat shrink type end joint in door type complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 95 to 120 sqmm Make : Raychem/Denson/M Seal/ Birla 3M

S&F Cable jointing kit for 11 KV (Earthed) grade cable for heat shrink type straight joint out door type complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 95 to 120 sqmm Make : Raychem/Denson/M Seal/Birla3M

Dismantling and taking out broken/worn out/deshaped steel/PCC pole any type of 8.5 to 9.0 mtr long

Supply, Errecting and fixing in true Vertical position steel tubular swaged pole complete with cast iron base plate, finial taper plug, bolt, nuts and screw,weld and reduced section and logitudional weld Seam through out entire length of pole including 2 coats of black bituminious paint through out intrnally and externally up to planting depth and remaining exterior portion of pole with two coats of aluminium paint over a coat of red oxide as specified type 410 SP 31 (9.00 Mtr long) all as specified and directed at site. NOTE - Excavation and Earth work and PCC in foundation shall be measured and paid seprately.. Make : Surjit Steel Industries / Vikram Industries/Mohinder Industries/Advance tube jammu

Dimantling and taking down old/unsv cross arms, bracing, supports etc complete all as specified and directed.

S&F cross arms bracings supports clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding bending cold or hot, drilling holes for bolts in any shape or size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of aluminium paints complete all as specified and directed.

Dismantling and taking down old/unsv ACSR conductor any size complete all as specified and directed.

S&F ACSR conductor incl jointing with existing conductor and straining on LT pole and proper fastening to pin/shackle insulators with aluminium binding wires and required jumpering connection all as directed. Note :- Size of aluminium conductor as per site requirement will be directed by Engineer-in-Charge. Make :Bharat Conductors/NICCO/Jayshree (Aditya birla)

Dimantling and taking down old/unsv insulator of any type any size from pole/stay complete all as specified and directed.

S&F pin type, porcelain, vitreous, brown, including one galvanised mild steel spindle, two galvanised iron washer and one galvanised iron nut, 100mm height and 65 mm dia for 1100 volts grade all as specified and directed. Make : Jaipuria / BHEL /Jayshree or equivalent

S&F shackle type, porcelain vitreous white, brown or green insulator including galvanised mild steel straps, washers, insulators bolts ,washer and nuts of size 100 mm height and 115 mm dia for 1100 Volts grade complete all as specified and directed. Make : Jaipuria / BHEL /Jayshree or equivalent

S&F Loop type insulator, porcelian vitreous brown of size 65x90mm and clearence hole 16mm all as specified and directed. Make : Jaipuria / BHEL /Jayshree or equivalent

S&F Disc type insulator porcelain, vitrous 145mm high and 255 mm dia ball and socket type white, brown or green single disc with tension clamp for conductor for working pressure voltage 11000V all as specified and directed. Make : Jaipuria / BHEL /Jayshree or equivalent

S&F pin type, porcelain, vitreous, brown, including one galvanised mild steel spindle, two galvanised iron washer and one galvanised iron nut, 150mm height and 150 mm dia for 11000 volts grade all as specified and directed. Make : Jaipuria / BHEL /Jayshree or equivalent

M&L for Stay assembly using 16mm dia galvanised rod complete all as shown in electrical plate No 1 of SSR Part I incl dismantling unsv one all as specified and directed. (Clamps, loop insulator, earth work, PCC measured separately)

S&F for stay wire using galvanised steel strand of 7/3.15mm complete with necessary binding incl dismantling and taking down unserviceable one all as specified and directed

M&L triple pole mechanically operated GOD mounted on insulators and steel frame with operating mechanism worked from ground level 11000 volts grade of current carrying capacity up to 200 Amps complete incl removing the existing unserviceable one.

M&L for restraining of overhead ACSR conductor of any size of 5 conductor on pole after disconnecting all jumpering connection & binding of insulators and redoing all jumpering connection and insulator binding with aluminium conductor providing required T&P all as specified and directed

M&L for restraining of ACSR conductor of any size of 2 conductor on pole after disconnecting all jumpering connection & binding of insulators and redoing all jumpering connection and insulator binding with aluminium conductor providing required T&P all as specified and directed

Supply and fixing in replacement of MCCB 400 Amps 4 Pole, 35 KA, 415 V, 50 Hz complete all as specified and directed. Make : Legrand/Schenider (Electric)/L&T

All as per item No 48.00 here in before but MCCB 250 Amps 4 Pole, 25 KA, 415 V, 50 Hz complete all as specified and directed. Make : Legrand/Schenider (Electric)/L&T

All as per item No 48.00 here in before but MCCB 200 Amps 4 Pole, 25 KA, 415 V, 50 Hz complete all as specified and directed. Make : Legrand/Schenider (Electric)/L&T

All as per item No 48.00 here in before but MCCB 160 Amps 4 Pole, 25 KA, 415 V, 50 Hz complete all as specified and directed. Make : Legrand/Schenider (Electric)/L&T

All as per item No 48.00 here in before but MCCB 100 Amps 4 Pole, 16 KA, 415 V, 50 Hz complete all as specified and directed. Make : Legrand/Schenider (Electric)/L&T

M&L for painting and writing pole number on steel tubular pole with one coat of alumium paint incl cross arm, bracings, supports, nuts, bolts, of LT OH line from above copping to top of pole and marking with alternate white and yellow/black paint strip 30 cm wide (5 Nos) with synthetic enamelled paint all as specified and directed.

M&L for trimming of branches of trees touching LT/HT electric over head line and making clear about 3 mtr in radius by climbing up tree or by providing ladder, at a height 7 mtr and above and carrying and depositing where directed not exceeding 50 mtr.

S&F rigid PVC line spacer, suitable for 2 wire, made from high grade PVC material, distance between phase to phase 300mm, suitable for use with 1100 volts grade including taking down unsv one all as specified and directed.

S&F rigid PVC line spacer, suitable for 5 wire, made from high grade PVC material, distance between phase to phase 300mm, suitable for use with 1100 volts grade including taking down unsv one all as specified and directed.

Dismantling taking down unserviceable flood/street/post top lantern/gate light fitting any type any capacity from Pole/Building for replacement complete all as specified and directed.

S&F LED Street light fitting 90 Watt new generation energy saving & environmental friendly long life versatile pressure die-cast aluminium IP66 protection 10KV SPD included ,road luminaire with high power LEDs as light source and electronic driver efficiency 110 LM/W . Make - Crompton cat part No LSTP-90-CDL-M or eqivalent in Philips / wipro / Havells

S&F energy saviing environmental friendly, long life exclusive innovative die-cast aluminium IP-66 option for 3000K, 10 KV SPD included ,LED flood light of 120 Watt with high power LED toughened glass and high power LEDs and secondary lenses complete all as specified and directed. Make - Crompton cat part No LFLN-120-CDL/60-M or eqivalent in Philips / wipro / Havells

S&F Security light Bracket made out of galvanised steel light grade pipe of 40mm dia 1.5 mtr long bend to an angle of 120 degree with 02 Nos mild steel clamp 50mm x 50mm and 04 sets of nuts, bolts and washers painting with two coats of synthetic enamel paint over a coat of red oxide primer incl dismantling taking down unsv brackets complete all as specified and directed. Make : Jindal Pipes / TATA / Prakash Tubes

S&F Street light junction box of size 200mm x 140mm x 95mm outdoor type, weather proof, factory made out of PVC sheet 1.8mm thick with front side hinged opening having locking arrangement with nuts & bolts & arrangement for incoming and out going cable/wire complete comprising with the followings incl dismantling taking down unsv junction box complete all as specified and directed. :- (a) Bus bar with two aluminium strips, 63 Amps capacity insulated with insulators, including colour coding, including PVC cable of suitable size from bus bar to MCB (b) MCB SPN 5 to 30 Amps - 01 No (c) Clamps made out of 25mm x 3mm flat iron duly welded with nuts & bolts complete all as specified and directed. Make : Sintex / Hansel etc or equvts

Servicing, repairing, overhauling and testing of Voltage Stablizer of capacity 100 KVA by disconnecting the incoming and outgoing connection strip opening the stablizer complete for taking out the unserviceable servo motors, auto control, circuit plates, dimmer and switches, voltmeter with switches and replace the following and testing on full load as directed by the Engineer-in-Charge for the following Capacity :-(a) Servo motor as per existing size - 01 No, (b) Voltmeter 0 to 500 Volts with switch. - 01 No, (c) Voltage on off adjusting switch (Auto control Switch), (d) Supply and pouring transformmer oil after dehydrating the sump - 200 Ltrs, (e) Roller Wheels as per existing size - 04 Nos, (f) Voltmeter 0-300 Volts - 03 Nos (g) Supply and fixing of dimmer 100 KVA -03 Nos

Servicing, repairing, overhauling and testing of Voltage Stablizer of capacity 100 KVA by disconnecting the incoming and outgoing connection strip opening the stablizer complete for taking out the unserviceable servo motors, auto control, circuit plates, dimmer and switches, voltmeter with switches and replace the following and testing on full load as directed by the Engineer-in-Charge for the following Capacity :-(a) Servo motor as per existing size - 01 No, (b) Voltmeter 0 to 500 Volts with switch. - 01 No, (c) Voltage on off adjusting switch (Auto control Switch), (d) Supply and pouring transformmer oil after dehydrating the sump - 200 Ltrs, (e) Roller Wheels as per existing size - 04 Nos, (f) Voltmeter 0-300 Volts - 03 Nos (g) Supply and fixing of dimmer 200 KVA -03 Nos

K S BUILDERS

SUBASH CHANDER