Upgradation of District Headquarter Hospital at Angul

SL.No. Description of Item OSR Amount in Rs. Non-Shedule Item Amount in Rs. Total Amount in Rs.

SL.No. Description of Item Unit Item Shedule Item Rate For OSR Shedule Item Amount in Rs. Amount in Rs.

1 Earthwork Excavation

Earth work in all kind of soil within 50m. Initial

lead and 1.5m initial lift including rough dressing

and breaking clods to maximum 5cm to 7cm and

laying in layers not exceeding 0.3m in depth and as

(a) per the direction of the Engineer-in-charge. cum 2992.360 195.10 583809.44

Extra lift of 1.5m or part there of over the initial

lift of 1.5m in all kinds of embankments and road

(b) works and ordinary earth work in general. cum 1032.510 212.90 219821.38

2 Sand Filling

Filling in foundation, trenches and plinth with

river sand, well watered and compacted in layers

of 0.3 mtr, with top surface dressed and leveled to

proper gradient including cost of all materials,

conveyance, all taxes and royalties, loading and

unloading, including cost of all labour, sundries ,T

& P etc. All complete as per directions of the

Engineer -in-charge. cum 2141.550 639.80 1370163.69

Providing and laying of Cement Concrete of grade

1: 4 :8 (1cement : 4 sand : 8 graded stone

aggregate 40 mm nominal size ) of approved

quality from quarry mixing in concrete mixer

,lowering and compacting in proper thickness ,

watering & curing for the required period

.including all cost of labour

,material,conveyance,royalties and taxes ,sundries

,T & P etc. but excluding the cost of centering and

shuttering all complete as per the directions of

Engineer-in-charge. cum 218.280 4481.40 978199.99

Providing and laying of Cement Concrete of grade

1: 3 :6 (1cement : 3 sand : 6 graded stone

aggregate 20 mm nominal size ) of approved

quality from quarry mixing in concrete mixer

,lowering and compacting in proper thickness ,

watering & curing for the required period

.including all cost of labour

,material,conveyance,royalties and taxes ,sundries

,T & P etc. & including the cost of centering and

shuttering all complete as per the directions of

Engineer-in-charge. cum 410.280 4864.30 1995725.00

Qnty. Shedule Qnty. Non- Rate For Non- OSR Non-Shedule Item

SL.No. Description of Item Unit Item Shedule Item Rate For OSR Shedule Item Amount in Rs. Amount in Rs.

5 Antitermite Treatment

Providing anti-termite treatment using approved

quality of chemical emulsion, spraying the mixture

uniformly by sprayer as preconstructional anti

termite treatment and creating a chemical barrier

under and around the column pits, wall trenches,

top surface of plinth filling, junction of walls &

floors along with external perimeter of the

building, expansion joints, surrounding the pipes

and conduits etc. complete at the rate as directed

by the manufacturer confirming to IS:6313 (Part-

II) and as per direction of Engineer-in-charge

including cost of all materials, labour, taxes,

sundries, T&P etc. complete. (The payments shall

be made on the basis of actual plinth area of the

building at Ground Floor & vertical faces will not

be measured for payment.) Note:- The Contractor

shall have to furnish 10years Guarantee to maintain

the anti-termite treated area / structures free from

6 BACK FILLING

Filling available excavated earth (excluding rock)

in trenches plinth sides of foundation etc. in layers

not exceeding 20 cm in depth , consolidating each

deposited layers by ramming and watering, lead up

to 50m and lift up to 1.5 mt etc. including cost of

all labour, sundries T & P etc complete in all

respect as per the direction of Engineer-In-Charge. cum 3553.340 92.47 328565.51

RCC work M-25 grade as per approved designs

and drawings having a minimum compressive

strength (in work test) 25 N. / Square mm. in 15

cm. cubes at 28 days after mixing and test

conducted in accordance with I.S. 456 and I.S. 516

using 12 mm. to 20 mm. size black hard crusher

broken granite stone chips and screened and

washed sharp sand for mortar of approved quality

from approved quarry, washed and cleaned (20

mm. size chips not to exceed 25 % ) to be mixed

in concrete mixture with approved grade cement

including hoisting, lowering, laying and

compacting concrete by using vibrators, watering

and curing for 28 days and finishing the exposed

surface smooth providing grooves or beads

wherever necessary including cost, conveyance,

loading, unloading, royalties and taxes of all

materials and cost of all labours, sundries, T&P,

required for the work etc. complete in all respect

but excluding cost of centering & shuttering as per

direction of the Engineer in charge.

Foundation and plinth cum 1410.380 5520.80 7786425.90

Qnty. Shedule Qnty. Non- Rate For Non- OSR Non-Shedule Item

SL.No. Description of Item Unit Item Shedule Item Rate For OSR Shedule Item Amount in Rs. Amount in Rs.

Terrace Floor cum 36.900 5934.00 218964.60

8 Reinforcement

Providing, fixing in position TMT Fe-500

reinforcement bars for RCC work of required

diameter of approved quality including

straightening, cutting, bending, binding, welding

and joining (if necessary) and tying the grills and

placing in position as required for R.C.C. work and

providing hoisting, lowering and laying including

cost, conveyance and taxes of tor steel and

binding wires of 18 gauge and labour required for

the work for bending, binding and tying the grills

in all heights as per the specification & direction of

Engineer -in-charge. (Linear measurements will be

taken & quantity will be calculated on standard

weight. Weight of binding wire will not be

considered for measurement.)

Foundation and plinth qntl 2820.760 8149.30 22987219.47

Ground Floor qntl 2130.354 8149.30 17360893.85

Terrace Floor qntl 73.983 8250.00 610355.63

9 Centering and Shuttering

Providing steel centering and shuttering(steel/ ply)

to required shape and size for all kinds of R.C.C.

works centering materials with all necessary

bracing, ties and supports with level centering

covered with 50 micron polythene

sheet/bituminous paper . as per the direction of

the Engineer -in-charge and dismantling and

removing the shuttering after the required interval

from the date of casting, including cost of all

materials with transportation, taxes, loading and

unloading etc. and all labour, sundries, T&P

scaffolding etc. complete.

Plinth Beam sqm 257.240 105.00 27010.20

Qnty. Shedule Qnty. Non- Rate For Non- OSR Non-Shedule Item

SL.No. Description of Item Unit Item Shedule Item Rate For OSR Shedule Item Amount in Rs. Amount in Rs.

10 Structural steel

Supplying of all types of structural steel confirming

to Fe410 B of IS:2062, fabrication, assembling,

erection / slewing / end launching of steel girders /

truss upto 15M height on substructure incl.

provision of trolly refuges, if required. Complete

as per approved drawing incl. one coat of Zinc

chrome primer to IS-104 & one coat of Zinc

chrome Red Oxide and 2 coat of enamel paint

(Approved colour from Asian, Berger, ICI Dulex)

to IS 2074 and painting as per IRS-B-1 on all

members, (Detailed fabrication and erection

drawings & launching methodology will be

prepared and got approved by the contractor from

TPL / client). Rate include fabrication of all types

of battens, bracing, ties, stiffeners, packing,

diaphrams, shop rivets / welding, T&F bolts, drifs,

shop welds, templates, jigs, fixtures, backup

supports, accessories, transporting various

components from fabrication shop. to site. Kg 59155.00 160.00 9464800.00

11 Galvanised iron profile sheets

Qnty. Shedule Qnty. Non- Rate For Non- OSR Non-Shedule Item

SL.No. Description of Item Unit Item Shedule Item Rate For OSR Shedule Item Amount in Rs. Amount in Rs.

Supply and istallation of precoated galvanised iron

profile sheets (Size, shape and pitch of corrugation

as approved by engineer - in charge) 0.5mm +/-

5% total coated thcikness (TCT) thick zinc coating

120gsm as per IS:277 in 240mpa steel grade, 5-7

microns epoxy primer on both side of the sheet and

polyster top coat 15-18 microns. sheet should have

protective guard film of 25microns minimum to

avoid cratches while transportation and should be

supplied in single length upto 12m or as desired by

Engineer-in-charge. The sheet shall be fixed using

self drilling / self tapping screws of size (5.5mm x

55mm) with EPDM seal or with polymer coated 'J'

or 'L' hooks, bolts and nuts 8mm diameter with

bitumen and G.I limpet washers filled with white

lead complete upto any pitch in horizontal /

vertical or curved surfaces excluding the cost of

purlins, rafters and trusses , including cutting to

size & shape, wherever required. Sqm 536.00 950.00 509200.00

B. SUPERSTRUCTURE

1 Fly Ash Brick Masonary(1:6)(superstructure)

Providing Fly ash bricks masonry work using

(250mmx120mmx80mm size) having crushing

strength not less than 75Kg/Sqcm in cement

mortar (1:6). Immersing the bricks in water before

use in all necessary projection splays cutting,

circular moulding, corbelling etc. Including cost of

conveyance ,taxes & royalties, loading and

unloading of all materials & cost of all labour,

scaffolding ,watering & curing ,sundries, T & P

etc. complete as per the direction of Engineer-in-

Terrace Floor cum 234.480 5513.60 1292828.93

2 Fly Ash Brick Masonary(1:4)(superstructure)

Providing Fly ash bricks masonry work using

(250mmx120mmx80mm size) having crushing

strength not less than 75Kg/Sqcm in cement

mortar (1:4). Immersing the bricks in water before

use in all necessary projection splays cutting,

circular moulding, corbelling etc. Including cost of

conveyance ,taxes & royalties, loading and

unloading of all materials & cost of all labour,

scaffolding ,watering & curing ,sundries, T & P

etc. complete as per the direction of Engineer-in-

Ground Floor cum 70.170 4300.04 301733.71

Qnty. Shedule Qnty. Non- Rate For Non- OSR Non-Shedule Item

SL.No. Description of Item Unit Item Shedule Item Rate For OSR Shedule Item Amount in Rs. Amount in Rs.

Second Floor cum 126.900 4772.70 605655.63

3 16 mm outside Plastering (1:6)

Providing 16mm thick cement plaster to the

surface of brick masonry wall with cement mortar

(1:6) including racking out joints, scraping and

cleaning the surface and finishing the plaster

surface smooth using wooden floats only to proper

plumbs and level and making grooves and beads to

give required ornamental finish as per drawings

including cost of all materials, conveyance, loading

and unloading, all taxes and royalties, all labour,

scaffolding, watering and curing, sundries and

T&P etc all complete as per direction of the

Engineer -in-charge

Ground Floor sqm 2038.340 200.90 409502.51

Second Floor sqm 2003.480 210.70 422133.24

Terrace Floor sqm 1456.788 221.10 322095.83

4 12 mm inside Plastering (1:6)

Providing 12mm thick cement plaster to the

surface of brick masonry wall with cement mortar

(1:6) including racking out joints, scraping and

cleaning the surface and finishing the plaster

surface smooth using wooden floats only to proper

plumbs and level and making grooves and beads to

give required ornamental finish as per drawings

including cost of all materials, conveyance, loading

and unloading, all taxes and royalties, all labour,

scaffolding, watering and curing, sundries and

T&P etc all complete as per direction of the

Engineer -in-charge

Terrace Floor sqm 792.570 155.20 123006.86

5 6 mm Plastering (1:4)

Providing 6mm thick cement plaster with cement

mortar of (1:4) to ceilings of roof slabs, stairs,

landings, chajja, shelves, columns, beams and lofts

etc. including roughening, scraping and cleaning

and finishing the plastered surface smooth using

wooden floats only to proper plumbs and level,

making grooves and beads to give required

ornamental finish as per drawings including cost of

all materials, conveyance, loading and unloading,

all taxes and royalties, all labour, scaffolding,

watering and curing , sundries and T&P etc all

complete as per direction of the Engineer -in-

Ground Floor sqm 3764.980 156.10 587713.38

Qnty. Shedule Qnty. Non- Rate For Non- OSR Non-Shedule Item

SL.No. Description of Item Unit Item Shedule Item Rate For OSR Shedule Item Amount in Rs. Amount in Rs.

Second Floor sqm 3602.500 163.30 588288.25

Terrace Floor sqm 458.070 171.00 78329.97

6 Grading Concrete

Providing average 25mm thick grading Concrete

with (1:2:2) using 6mm black hard granite chips

using 2% water proofing cement compound of

approved quality over top of Roof, Terrace,

including cost of scaffolding, scraping and cleaning

the roof surface, plastering and finishing smooth to

proper slope and gradient including cost of all

materials, conveyance and sundries, T&P etc.

complete as per direction of the Engineer -in-

Terrace Floor sqm 3964.520 301.30 1194509.88

7 Water Proofing Treatment

Providing and laying water proofing treatment in

sunken portion of WCs,bathroom etc., by applying

cement slurry mixed with water proofing

cementcompound consisting of applying :(a) First

layer of slurry of cement @ 0.488 kg/sqm mixed

with water proofing cement compound @ 0.253

kg/ sqm. This layer will be allowed to air cure for

(b) Second layer of slurry of cement @ 0.242

kg/sqm mixed with water proofing cement

compound @ 0.126 kg/sqm. This layer will be

allowed to air cure for 4 hours followed with water

curing for 48 hours. The rate includes preparation

of surface, treatment and sealing of all joints,

corners, junctions of pipes and masonry with

polymer mixed slurry.

Second Floor sqm 693.932 283.10 196452.15

Terrace Floor sqm 3964.520 283.10 1122355.61

8 Vitrified Tile Flooring

Supplying, Fitting, Fixing Double charged

Vetrified Tile (600 x 600) of approved make

confirming to IS 13755 in floors treads or steps

and landing laid on 25mm thickbed of cement

mortar1:4(1cement : 4sand) filling joints with

white cement of approved quality including cost of

all materials labour T & P etc required for the

work all complete as per direction of Engineer in

Qnty. Shedule Qnty. Non- Rate For Non- OSR Non-Shedule Item

SL.No. Description of Item Unit Item Shedule Item Rate For OSR Shedule Item Amount in Rs. Amount in Rs.

9 Vitrified Tile Skirting

Supplying, Fixing Double charged Vetrified Tiles

(600 x 600)in Dados Skirting & Risers of Steps of

12mm thick cement plaster (1:3) jointed with neat

cement slurry mixed with pigments to match the

shade of the tiles including cost of all materials

labour T & P etc required for the work all

complete as per direction of Engineer in Charge.

Ground Floor sqm 186.411 1340.10 249809.38

Second Floor sqm 166.190 1369.90 227663.68

10 Anti static Flooring & Skirting

Providing and installation of iQ TORO SC Vinyl

Sheet Flooring manufactured by Tarkett with a

nominal thickness of 2mm as per ISO 24340 - EN

429 and width of 2m as per ISO 24341 - EN 426.

iQ TORO SC shall conform to requirement of ISO

10581 - EN 649. iQ TORO SC shall have binder

content of Type I as per ISO 10581, Fire resistance

of 8kW/m2 as per ISO 9239-1 and Class Bfl-S1 as

per EN 13501-1, Indentation of less than .03mm

as per ISO 24343-1 and EN 433, Slip Resistance

of R9 as per DIN 51130, greater than 0.3 as per

EN 13893. The static electrical discharge shall be

less than 2kV as per EN 1815. The electrical

resistance of the product shall be less than 10^8 Ω

as per EN 1081. The product does not contain

Pthalate based plasticizer and emission rate of

VOC is very low, measured after 28 days as per

EN 16516. TVOC and formaldehyde emissions are

below 10µg/m3. It is 100% REACH compliant.

The product is fit to be used in Class 34 in

Commercial and Class

43 in Industrial as per EN ISO 10874.The product

is installed using multi coloured welding rods to

ensure seamless finish. The average seam strength

shall be more than 240N/50mm as per EN 684.

Ground Floor sqm 230.130 2280.00 524696.40

Qnty. Shedule Qnty. Non- Rate For Non- OSR Non-Shedule Item

SL.No. Description of Item Unit Item Shedule Item Rate For OSR Shedule Item Amount in Rs. Amount in Rs.

11 Tac Tile and laying tactile tile (for vision

impaired persons as per standards) of size

300x300x9.8mm having with water absorption less

than 0.5% and conforming to IS: 15622 of

approved make in all colours and shades in for

outdoor floors such as footpath, court yard, multi

modals location etc., laid on 20mm thick base of

cement mortar 1:4 (1cement : 4 coarse sand) in all

shapes & patterns including grouting the joints

with white cement mixed with matching pigments

etc. complete as per direction(Tactile sample shall

be approved by Engineer-in-charge) Approved

Make: Jhonson Endura , Ultra Tile, Vyara

Ground Floor sqm 104.630 2108.96 220660.48

Second Floor sqm 89.610 2108.96 188983.91

12 Antiskid Flooring

Supplying, Fixing Antiskid Vetrified Tile (600 x

600) of approved make confirming to IS 13755 in

floors treads or steps and landing laid on 25mm

thickbed of cement mortar1:4(1cement : 4sand)

filling joints with white cement of approved quality

including cost of all materials labour T & P etc

required for the work all complete as per direction

of Engineer in Charge. (For New Work Only)

Ground Floor sqm 252.930 1555.50 393432.62

Second Floor sqm 154.000 1575.30 242596.20

13 Granite Flooring

Supplying & Fixing Granite tiles 20mm thick in

floors/ platform trades or steps and landing on 25

mm thick bed of Cement motar 1:1 Jointed with

neat cement slury moxed with pigment to match

the shades of the tiles including rubbing and

polishing including cost of all meterials etc.

Second Floor sqm 195.020 2291.40 446868.83

14 Antiskid Tile flooring

Providing & Fixing Floor tiles in floors, treads or

steps and landing on 25mm thick bed of cement

mortar 1:1 (1 cement : 1 sand) jointed with neat

cement slurry mixed with pigment to match the

shades on the tiles etc. complete.

Ground Floor sqm 175.450 806.20 141447.79

Second Floor sqm 208.280 823.90 171601.89

Qnty. Shedule Qnty. Non- Rate For Non- OSR Non-Shedule Item

SL.No. Description of Item Unit Item Shedule Item Rate For OSR Shedule Item Amount in Rs. Amount in Rs.

15 Glazed Dado

Providing & Fixing Glazed Tiles in Dados Skirting

&Risers of Steps of 12mm thick cement plaster

(1:3) jointed with neat cement slurry mixed with

pigments to match the shade of the tiles including

rubbing and polishing complete.

Ground Floor sqm 657.762 817.20 537523.11

Second Floor sqm 764.526 843.80 645107.04

16 Gypsum ceiling

Providing & fixing false ceiling at all heights with

GRG (Glass Fibre Reinforced Gypsum) false

ceiling tiles of Size 595x595 mm of approved

texture, design and patterns having moisture

content less than 2%, humidity resistance of 99%,

NRC0.50 to 0.75 as per IS 8225:1987, Non

combustible as per BS 476 (part 4)-1970 and light

reflectance of 85% (minimum) to be laid in true

horizontal level suspended on inter-locking metal

T-Grid of hot dipped galvanised iron section of

0.33mm thick (galvanized @ 120 grams per sqm

including both sides) comprising of main-T

runners of size 15x32 mm of length 3000 mm,

cross - T of size 15x32 mm of length 1200 mm

and secondary intermediate cross-T of size 15x32

mm of length 600mm to form grid module of size

600 x 600 mm, suspended from ceiling using

galvanised mild steel items (galvanizing @ 80

grams per sqm) i.e. 50 mm long, 8 mm outer

diameter M-6 dash fasteners, 6 mm dia fully

threaded hanger rod upto 1000 mm length and L-

shape level adjuster of size 85x25x2 mm.

Galvanised iron perimeter wall angle of size

24x24x0.40 mm of length 3000 mm to be fixed on

periphery wall / partition with the help of plastic

rawl plugs at 450 mm center to center and 40 mm

long dry wall wood screws. The work shall be

carried out as per specifications, drawing and as

per directions of the Engineer-in-Charge.

17 Grid ceiling

Providing fitting and fixing of false ceilling with

Aluminium anodised T Section No. 3215 with 2'-

0" center to center, L section No. 1705 upto 15

micron on 4 walls to be fixed by means of steel

screw and P.V.C plug and the Aluminium grid 2'-

0"x2'-0" suspended from ceiling etc complete

Qnty. Shedule Qnty. Non- Rate For Non- OSR Non-Shedule Item

SL.No. Description of Item Unit Item Shedule Item Rate For OSR Shedule Item Amount in Rs. Amount in Rs.

Fully Glazed Door ( Ref. Hardware Set as per

specification H8, iCLEAN HOLLOW METAL

18 SYSTEMS Pvt. Ltd.)

Supplying and fixing-Fixing of Un-plasticised poly

vinyl chloride (UPVC) (FENESTA/NCL VEKA

LTD.) Casenent Door-60-Series duly

manufactured using UPVC reinforced profiles of

60mm x 55mm x 2.5mm for outer frames 102mm

x 60mm x 2.5mm casement Door Sash profile and

74mm x 60mm x 2.5mm mullion peofile capable

of mounting single glazing system, structurally

reinforced with hot dip galvanised up to 50

microns of minimum thickness of 2.0 mm

prefabricated & welded through fusion welding the

door sash shall be fitted with 12mm thick WPC

Board of Greenply make duly fixed with EPDM

weathering seal resistant accessories like clipping

locking system made of aluminium 1 No. per set of

sashes and th esystem isto be installed at the site

using anchor fasteners, silicon rubber sealant,easy

glazing/deglazing at site etc. including cost and

conveyance of all material, accessories, labour

charges, materials and product conforming to

ASTM D 638-14,EN-447-95 and other applicable

codes and standards. (Ref.-Office of the Engineer-

In-Chife (CIVIL), Odisha Nirman

Soudha,Bhubaneswar. Lt. No-16100)

Fire Door ( Ref. Hardware Set as per specification

H1, iCLEAN HOLLOW METAL SYSTEMS Pvt.

Ground Floor Each 24 51785.59 1242854.16

First Floor Each 25 51785.59 1294639.75

Second Floor Each 29 51785.59 1501782.11

Third Floor Each 19 51785.59 983926.21

Terrace Floor Each 6 51785.59 310713.54

Lead Door ( Ref. Hardware Set as per

specification H9 & H10, iCLEAN HOLLOW

21 METAL SYSTEMS Pvt. Ltd.)

Double Shutter Each 3 58267.00 174801.00

Single Shutter Each 1 37116.00 37116.00

Qnty. Shedule Qnty. Non- Rate For Non- OSR Non-Shedule Item

SL.No. Description of Item Unit Item Shedule Item Rate For OSR Shedule Item Amount in Rs. Amount in Rs.

22 Sal wood Choukath for Doors

Supplying, fitting and fixing in position well

seasoned & dressed Sal wood choukhats in doors

free from defects such as dead knots, flows etc. in

all floors including two coats of termite proof

wood preservatives to Rear surface of frames

which is in contact with concrete and masonry

surface fitted with 6 nos. of W.I. Clamps and

required screws of approved quality including

cutting legs to sizes, cutting holes in walls, fixing in

CC 1:2:4 including cost, conveyance, royalties and

taxes of all materials and cost of all labour,

sundries, T & P etc. required for the workall

complete as per the directions of Engineer -in-

Ground Floor cum 0.170 52987.50 9007.88

Supplying fitting and fixing in position 32mm thick

single leaf Grade-1 flush door confirming to

IS:2202 (part 01/1991) with select seasoned

timber and block board core framed with seasoned

hard wood battens and bonded at high pressure

with phonol formaldehyde resin under the cross

banding process, termite resistant and moisture

proof, including cost, conveyance, taxes of all

materials with 1mm thick laminate of approved

make on both side,1no of Aldrop, 3 nos of SS butt

hinges, 2 nos of tower bolt, PVC door stopper,

Buffer & SS handle as per the lay-out drawing and

specification given by the Architect, Including all

cost of labour, material, conveyance, loading,

unloading, T&P and painting the wooden surface

with an approved shade and finish etc all complete

as per directions of Engineer-in-charge.

Ground Floor cum 11.340 4702.05 53321.19

Providing and fixing Fiber Glass Reinforced

plastic (FRP) Door Frames of crosssection 90

mm x 45 mm having single rebate of 32 mm x 15

mm to receive shutter of 30 mm thickness. The

laminate shall be moulded with fire resistant grade

unsaturated polyester resin and chopped mat. Door

frame laminate shall be 2 mm thick and shall be

filled with suitable wooden block in all the three

legs. The frame shall be covered with fiber glass

from all sides. M.S. stay shall be provided at the

24 bottom to steady the frame.

Ground Floor rmt. 188.100 576.08 108361.45

Second Floor rmt. 267.300 576.08 153987.32

Qnty. Shedule Qnty. Non- Rate For Non- OSR Non-Shedule Item

SL.No. Description of Item Unit Item Shedule Item Rate For OSR Shedule Item Amount in Rs. Amount in Rs.

30 mm thick Fiberglass Reinforced Plastic

(F.R.P.) flush door shutter in different plain and

wood finish made with fire retardant grade

unsaturated polyester resin,moulded to 3 mm thick

FRP laminate all around, with suitable wooden

blocks inside at required places for fixing of

fittings and polyurethane foam (PUF)/Polystyrene

foam to be used as filler material throughout the

hollow panel, casted monolithically with testing

parameters of F.R.P. laminate conforming to table -

3 of IS: 14856,complete as per direction of

25 Engineer-in-charge.

Ground Floor sqm 59.850 3334.41 199564.60

Second Floor sqm 85.050 3334.41 283591.80

Providing and fixing 1mm thick M.S. sheet door

with frame of 40x40x6 mm angle iron and 3 mm

M.S. gusset plates at the junctions and corners, all

necessary fittings complete, including applying a

priming coat of approved steel primer.Using M.S.

angels 40x40x6 mm for diagonal braces

Ground Floor sqm 15.750 4428.15 69743.36

First Floor sqm 13.500 4428.15 59780.03

Second Floor sqm 13.500 4428.15 59780.03

Third Floor sqm 13.500 4428.15 59780.03

Terrace Floor sqm 15.120 4428.15 66953.63

27 UPVC SLIDING WINDOWS

Two track two panels sliding window made of (big

series) frame 67 x 50 mm & sash 46 x 62 mm both

having wall thickness of 2.3 ± 0.2 mm and single

glazing bead / double glazing bead of appropriate

(i) dimension . (Ref.-DSR-Page-549, Item-9.147D.3)

Ground Floor sqm 118.200 5826.15 688650.93

Second Floor sqm 154.560 5826.15 900489.74

Three track three panels sliding window with fly

proof S.S wire mesh (Two nos.glazed & one no.

wire mesh panels) made of (big series) frame 116

x 45 mm & sash 46 x 62 mm both having wall

thickness of 2.3 ± 0.2 mm and single glazing bead

/double glazing bead of appropriate dimension

(ii) (Ref.-DSR-Page-550, Item-9.147D.4)

Ground Floor sqm 25.920 7261.20 188210.30

Second Floor sqm 25.920 7261.20 188210.30

Terrace Floor sqm 12.960 7261.20 94105.15

Qnty. Shedule Qnty. Non- Rate For Non- OSR Non-Shedule Item

SL.No. Description of Item Unit Item Shedule Item Rate For OSR Shedule Item Amount in Rs. Amount in Rs.

Providing and fixing factory made uPVC white

colour fixed glazed windows/ventilators

comprising of uPVC multi-chambered frame and

mullion (where ever required) extruded profiles

duly reinforced with 1.60 ± 0.2 mm thick

galvanized mild steel section made from roll

forming process of required length (shape & size

according to uPVC profile), , uPVC extruded

glazing beads of appropriate dimension, EPDM

gasket, G.I fasteners 100 x 8 mm size for fixing

frame to finished wall, plastic packers, plastic caps

and necessary stainless steel screws etc.Profile of

frame shall be mitred cut and fusion welded at all

corners, mullion (if required) shall be also fusion

welded including drilling of holes for fixing

hardware's and drainage of water etc. After fixing

frame the gap between frame and adjacent finished

wall shall be filled with weather proof silicon

sealant over backer rod of required size and of

approved quality, all complete as per approved

drawing & direction of Engineer-in-Charge.(Ref.-

(iii) DSR-Page-543, Item-9.147B)

Ground Floor sqm 9.000 5399.70 48597.30

First Floor sqm 16.200 5399.70 87475.14

Second Floor sqm 28.800 5399.70 155511.36

28 UPVC VENTILATORS

Supplying and fixing-Fixing of Un-plasticised poly

vinyl chloride (UPVC) (FENESTA/NCL VEKA

LTD.) Ventilators Top Hung-60-Series duly

manufactured using UPVC reinforced profiles of

60mm x 50mm x 2.5mm for outer frames, 75mm

for outer frames. 75mm x 60mm x 2.5mm for

casement window sash profile capable of mounting

single glazing system, structurally reinforced with

hhot dip galvanised up to 50 microns of minimum

thickness of 1.5 mm prefabricated & welded

through fusion welding the window sash shall be

fitted with EPDM weathering seal resistant

accessories like clipping locking system made of

aluminium 1 No. per set of sashes and th esystem

isto be installed at the site using anchor fasteners,

silicon rubber sealant,easy glazing/deglazing at site

etc. including cost and conveyance of all material,

accessories, labour charges, materials and product

conforming to ASTM D 638-14,EN-447-95 and

other applicable codes and standards.(Ref.-Office

of the Engineer-In-Chife (CIVIL), Odisha Nirman

Soudha,Bhubaneswar. Lt. No-16100)

Ground Floor sqm 13.200 7115.00 93918.00

First Floor sqm 11.520 7115.00 81964.80

Second Floor sqm 14.040 7115.00 99894.60

Third Floor sqm 12.360 7115.00 87941.40

Terrace Floor sqm 22.590 7115.00 160727.85

Supplying, fitting, fixing of M.S grills of approved

design and specification by using M.S. flat, angle,

square bar confirming to I.S. No. 1977/95 in

wooden choukath / brick wall with necessary nos

of screws as may be required including cutting

holes for clamps & fixing the grills with C.C.

(1:2:4) by using 12mm size H.G. chips wherever

necessary in all floors and all heights including

watering, curing ,scafolding with cost, conveyance,

taxes of all materials, cost of all labour, labour

cess, T&P etc required for the work complete in all

respect as directed by Engineer-In-Charge.

30 UPVC Window Glass

Coloured toungened glass 6mm thick substrate

with reflective soft coating on face # 2, + 12mm

Airgap + 6mm Heat Strengthened clear Glass of

approved make having properties as visible Light

transmittance (VLT) of 25 to 35 %, Light

reflection internal 10 to 15%, light reflection

external 10 to 20 %, shading coefficient (0.25-

0.28) and U value of 3.0 to 3.3 W/m2 degree K

etc. The properties of performance glass shall be

decided by technical sanctioning authority as per

the site requirement. SQM 766.08 3228.00 2472906.24

31 S.S Railing

Qnty. Shedule Qnty. Non- Rate For Non- OSR Non-Shedule Item

SL.No. Description of Item Unit Item Shedule Item Rate For OSR Shedule Item Amount in Rs. Amount in Rs.

Supplying ,Fitting and fixing of stainless Steel of

304 grade in hand railing using 50mm dia of 2mm

thick circular pipe with Balustrade of size 32mm x

32mm x 2mm @ 0.90mtr C/C and stainless square

pipe bracing of size 32mm x 32mm x 2mm in 3

rows in stair case as per approved design and

specification, buffing, pollishing etc. with cost,

conveyance, taxes of all materials, labour, T&P

etc. required for the complete in all respect.

32 M.S Railing

Supplying ,Fitting and fixing of M.S hand rail of

approved size by welding etc. to steel ladder

railing, balcony railing, staircase railing and similar

works, including applying priming coat of

approved steel primer as per approved design and

specification, buffing, pollishing etc. with cost,

conveyance, taxes of all materials, labour, T&P

etc. required for the complete in all respect as per

the direction of Engineer in charge.

Ground Floor kg 641.376 109.29 70093.18

33 Synthetic Enamel Paint

Painting synthetic enamel paint of approved brand

and manufacture of required colour to give an

even shade with two or more coats on new work

over a coat of suitable shade with primer of

approved brand as per manufacturer's specification

including cost of all materials with taxes and

transportation, all labour, scaffolding, sundries,

T&P etc. All complete as per the direction of the

Engineer -in-charge.

Ground Floor sqm 153.120 187.16 28657.94

Terrace Floor sqm 15.750 207.60 3269.70

34 External Painting

Painting two coats with Water soluble weather

coat paints of approved shade of approved make

or equivalent over out side brick wall over a coat

of primer, by means of brush to outside surface of

new walls after scraping, cleaning the surface

including all cost of materials, scaffolding, labour,

watering & curing T&P etc complete as per

direction of Engineer -in-charge.

Ground Floor sqm 2038.340 127.20 259276.85

Second Floor sqm 2003.480 135.30 271070.84

Terrace Floor sqm 1456.788 143.60 209194.76

35 Internal Painting

Distempering two coats to walls with two coats of

putty and one coat of primer on the plastered

surface by means of rollers to give an even shade

including cost of all materials, labour,

conveyance, taxes, royalties, scaffolding, sundries,

T&P etc, All complete as per the direction of the

Engineer-in-charge

Terrace Floor sqm 1250.640 359.50 449605.08

36 Plinth Protection

Making plinth protection 50mm thick cement

concrete 1:3:6 over 75mm bed of dry brick ballast

40mm nominal size well rammed and consolidated

and grouted with fine sand including finishing the

Qnty. Shedule Qnty. Non- Rate For Non- OSR Non-Shedule Item

SL.No. Description of Item Unit Item Shedule Item Rate For OSR Shedule Item Amount in Rs. Amount in Rs.

Manufacturing, Providing and Installation of

GFRC (Glass Fibre Reinforced Concrete)

Screens/Jalis, Make “SAMUDYAM”, of thickness

30 mm ±5 mm with Pattern, design, and colour of

approved make to be fixed on/between RCC

/Block work Column or structural work with Dry

Fixing method with appropriate frame work, using

fasteners, and necessary hardware etc. in Building

Façade. The element shall be made from '53 grade'

Portland Cement make Birla/ 'JK Cement' or

equivalent, Quartz, Fine Silica Sand, Alkali

Resistant Glass fibre make 'OC' or equivalent,

Super plasticisers / Additives make by 'BASF' or

equivalent, Polymers make 'BASF' or equivalent

and U.V resistant Synthetic inorganic pigments

shall be used for pigmentation make

'BAYFERROX (Germany)' or equivalent. The

material casting shall take place in Synthetic

Rubber / FRP Mould manufactured by Mould /

Tool / Mould Grade Resin of Revex/ 'Reckli' or

Providing & Installation of MS strututcural

(II) Support behind GFRC jalis Kg 10251.36 175.00 1793988.00

38 Structural Glazing

Designing, fabricating, testing, protection,

installing and fixing in position semi (grid) unitized

system of structural glazing (with open joints) for

linear as well as curvilinear portions of the building

for all heights and all levels, including: (a)

Structural analysis & design and preparation of

shop drawings for the specified design loads

conforming to IS 875 part III (the system must

passed the proof test at 1.5 times design wind

pressure without any failure), including functional

design of the aluminum sections for fixing glazing

panels of various thicknesses, aluminium cleats,

sleeves and splice plates etc. gaskets, screws,

toggles, nuts, bolts, clamps etc., structural and

weather silicone sealants, flashings, fire stop

(barrier)-cum-smoke seals, microwave cured

EPDM gaskets for water tightness, pressure

equalisation & drainage and protection against fire

hazard including: (b) Fabricating and supplying

serrated M.S. hot dip

galvanised / Aluminium alloy of 6005 T5 brackets

of required sizes, sections and profiles etc. to

accommodate 3 Dimentional movement for

achieving perfect verticality and fixing structural

glazing system rigidly to the RCC/

masonry/structural steel framework of building

structure using stainless steel anchor fasteners/

bolts, nylon seperator to prevent bimetallic

contacts with nuts and washers etc. of stainless

steel grade 316, of the required capacity and in

required numbers.

6mm Saint Gobain ST 167 toughen with digital

(I) print. on glass. sqm 40.00 7595.00 303800.00

(II) 6mm Saint Gobain ST 167 . sqm 256.00 5100.00 1305600.00

Providing and supplying aluminium extruded

tubular and other aluminium sections as per the

architectural drawings and approved shop

drawings , the aluminium quality as per grade

6063 T5 or T6 as per BS 1474,including super

durable powder coating of 60-80 microns

conforming to AAMA 2604 of required colour

and shade as approved by the Engineer-in-Charge.

( The item includes cost of material such as cleats,

sleeves, screws etc. necessary for fabrication of

extruded aluminium frame work. Nothing extra

(III) shall be paid on this account). Kg 1536.00 370.45 569011.20

Qnty. Shedule Qnty. Non- Rate For Non- OSR Non-Shedule Item

SL.No. Description of Item Unit Item Shedule Item Rate For OSR Shedule Item Amount in Rs. Amount in Rs.

1. Performance Laboratory Test for Air Leakage

Test (-50pa to - 300pa) & (+50pa to +300pa) as

per ASTM E-283-04 testing method for a range of

testing limit 1 to 200 mVhr 2. Static Water

Penetration Test. (50pa to 1500p) as per ASTME-

331-09 testing method for a range up to 2000 ml.

3. Dynamic Water Penetration (50pa to 1500pa) as

per AAMA 501.01- 05 testing method for a range

upto 2000 ml 4. Structural Performance Deflection

and deformation by static air pressure test (1.5

times design wind pressure without any failure) as

per ASTME-330-10 testing method for a range

upto 50 mm 5. Seismic Movement Test (upto 30

mm) as per AAMA 501.4- 09 testing method for

Qualitative test, Tests to be conducted on site. 6.

Onsite Test for Water Leakage for a pressure range

Qnty. Shedule Qnty. Non- Rate For Non- OSR Non-Shedule Item

SL.No. Description of Item Unit Item Shedule Item Rate For OSR Shedule Item Amount in Rs. Amount in Rs.

Load / Speed: 26 Persons (1768Kgs.) / 1.25 Mtr.

Per Second Drive: MICRO PROCESSOR BASED

VVVF - CLOSED LOOP Travel / PIT /

HEADROOM: 12.6 METER / PIT 1600mm /

HEADROOM 4200 mm Number and Position of

Car Entrances: 1 (ONE), IN FRONT ONLY

Position of Machinery: DIRECTLY ABOVE THE

LIFT WELL -GEARLESS Size of Lift Well: 2400

X 3000 Lift Car Inside Size: 1600 X 2400 X 2200

Clear opening of Gates / Doors / Lintel: 1200 X

2000 Type or Design of Lift Car: STAINLESS

STEEL - HAIRLINE FINISH

Car Ceiling: Car Floor SLEEK (SMALL

CIRCULAR LIGHTS) - SS HAIRLINE FINISH -

ALUMINIUM CHEQ. PLATE FLOORING

Car Fittings: LED LIGHTS & REGULAR

(CIRCULAR) - FAN

Type of Car Front Entrance Protection: POWER

OPERATED SIDE OPENING SLIDING DOOR -

STAINLESS STEEL - HAIRLINE FINISH Land

Entrance Protection &Landing Door Frame: SIDE

OPENING SLIDING DOOR - STAINLESS

STEEL - HAIRLINE FINISH Type of Control

System: MICROPROCESSOR BASED SIMPLEX

SELECTIVE COLLECTIVE CONTROL WITH /

WITHOUT ATTENDENT Electric Supply: AC 3

PHASE, 50 CYCLES, 415 VOLTS ±10%

Qnty. Shedule Qnty. Non- Rate For Non- OSR Non-Shedule Item

SL.No. Description of Item Unit Item Shedule Item Rate For OSR Shedule Item Amount in Rs. Amount in Rs.

ABSTRACT ESTIMATE FOR EXTERNAL DEVELOPMENTAL WORK FOR UP GRADATION OF DISTRICT HEADQUARTER HOSPITAL WITH 100

BEDS, ICU & TRAUMA CARE FACILITY AT ANGUL DISTRICT, ODISHA.

A. SITE DEVELOPMENT

Cleaning & grubbing road land including

uprooting rank

vegetation,grass,bushes,shurbes,sapling and trees

girth upto 300mm ,removal of stumps of trees cut

earier and disposal of unsevicable materials and

stacking of servicable materials to be used or

auctioned up to lead of 1000 meters including

removal and disposal of top organic soil not

1 exceeding 150mm thickness. sqm 7985.952 5.72 45679.65

Surface dressing of the ground including removing

vegetation and in-equalities not exceeding 15 cm

deep and disposal of rubbish, lead up to 50 m and

lift up to 1.5 m.

:All kinds of soil sqm 11978.928 12.38 148299.13

3 Good Earth Filling

Flling with selected earth brought from borrow

pits, transporting to site, spreading in layers,

watering and compacting to meet requirement as

per direction of the Engineer in charge. sqm 1197.893 468.50 561212.78

4 Tree Cutting

Felling of tree, Arial branch cutting, Arial cross

cutting, posh & pull for higher calss (economical

& un-economical trees).

Under 90cm to 119cm girth nos R.O 1000

Under 150cm to 179cm girth nos R.O 2600

Under 180cm to 209cm girth nos 45 3300 148500.00

Under 240cm to 269cm girth nos R.O 6600

Under 300cm to 329cm girth nos R.O 9500

B. DISMANTLING WORK

1 Dismantling brick

Dismantling brick or stone masonry in lime or

cement mortar under 3m. height including stacking

the useful materials for reuse and removing the

debris within 50m. Lead cum 320.60 994.60 318872.74

2 Dismantling G.C.I. or A.C. sheet roof

Dismantling G.C.I. or A.C. sheet roofing after

carefully removing the bolts and nuts including

stacking of he materials for reuse and removing the

debris within 50m lead sqm 2579.56 68.90 177731.68

3 Dismantling doors, windows

Dismantling and removing doors, windows and

ventilators including removal of frame, hinges,

fastening and stacking the same for reuse and

removing the debris within 50m lead sqm 90.09 303.80 27369.34

ABSTRACT ESTIMATE FOR EXTERNAL & INTERNAL PH WORK FOR UP GRADATION OF DISTRICT HEADQUARTER HOSPITAL WITH 100

BEDS, ICU & TRAUMA CARE FACILITY AT ANGUL DISTRICT, ODISHA.

SL.No. Description of Item Amount

i. INTERNAL PHE WORKS 15520779.98

ii. EXTERNAL WATER SUPPLY & PUMPS 1815443.00

iii. EXTENAL SEWAGE 958326.40

iv. WATER TREATMENT PLANT - 12 CUM/HR 810000.00

SUB TOTAL 19104549.38

Qnty. Shedule Qnty. Non- Rate For Non-

SL.No. Description of Item Unit Item Shedule Item Rate For OSR Shedule Item Amount in Rs.

A. INTERNAL PHE WORKS

Providing all materials, labour, T&P for laying of

following dia CPVC pipes S.D.R - 13.5 as per IS-

15778 with ISI mark including fixing of required

size CPVC fittings like,bend,Tee,elbow,offsets,etc.

and the same fixed on wall or floor with holder bat

clamps screw etc. including testing the joints with

required water presure.The cost inclusive of all

taxes,duties,transportation scaffolding etc. as per

specification and direction of Engineer-in-charge.

Hot water and inside the toitet - Make - Ashirwad,

1 Astral,Supreme

a 20mm diameter

Ground floor Rmt 96 190 18,240.00

Terrace floor Rmt 236 210 49,560.00

Qnty. Shedule Qnty. Non- Rate For Non- OSR Non-Shedule Item

SL.No. Description of Item Unit Item Shedule Item Rate For OSR Shedule Item Amount in Rs. Amount in Rs.

b 25mm diameter

Ground floor Rmt 0 261 -

1st Floor Rmt 0 266 -

2nd Floor Rmt 0 271 -

3rd Floor Rmt 0 276 -

Terrace floor Rmt 352 281 98,912.00

c 32mm diameter

Ground floor Rmt 0 372 -

1st Floor Rmt 0 377 -

2nd Floor Rmt 0 383 -

3rd Floor Rmt 0 388 -

Terrace floor Rmt 0 393 -

c 40mm diameter

Ground floor Rmt 0 450 -

1st Floor Rmt 0 455 -

2nd Floor Rmt 0 460 -

3rd Floor Rmt 0 465 -

Terrace floor Rmt 352 470 165,440.00

Providing and fixing to wall or ceiling and floor

pvc pipes conforming to ASTM-D-1785/89 (Sch-

40) and pipe fittings of the following nominal bore

with clamps including making good the wall,

ceiling and floor all complete as per

specification complete. Make - Ashirwad,

2 Astral,Supreme

a 20mm diameter

Ground floor Rmt 327 184 60,168.00

Terrace floor Rmt 208 205 42,640.00

b 25mm diameter

Ground floor Rmt 82 220 18,040.00

Terrace floor Rmt 305 250 76,250.00

c 32mm diameter

Ground floor Rmt 82 312 25,584.00

Terrace floor Rmt 286 332 94,952.00

d 40mm diameter

Ground floor Rmt 0 351 -

1st Floor Rmt 0 356 -

2nd Floor Rmt 0 361 -

3rd Floor Rmt 0 366 -

Terrace floor Rmt 230 371 85,330.00

e 50mm diameter

Ground floor Rmt 0 393 -

1st Floor Rmt 0 398 -

2nd Floor Rmt 0 403 -

3rd Floor Rmt 0 440 -

Terrace floor Rmt 128 445 56,960.00

f 65mm diameter

Ground floor Rmt 0 615 -

1st Floor Rmt 0 620 -

2nd Floor Rmt 0 625 -

3rd Floor Rmt 0 631 -

Terrace floor Rmt 68 636 43,248.00

g 80mm diameter

Ground floor Rmt 0 690 -

1st Floor Rmt 0 695 -

2nd Floor Rmt 0 700 -

3rd Floor Rmt 0 805 -

Terrace floor Rmt 352 710 249,920.00

h 100mm diameter

Ground floor Rmt 0 980 -

1st Floor Rmt 0 985 -

2nd Floor Rmt 0 990 -

3rd Floor Rmt 0 995 -

Terrace floor Rmt 352 1000 352,000.00

Providing and fixing to wall or ceiling and floor

pvc pipes conforming to ASTM-D-1785/89 (Sch-

80) and pipe fittings of the following nominal bore

with clamps including making good the wall,

ceiling and floor all complete as per specification

3 complete. Make - Ashirwad, Astral,Supreme

Qnty. Shedule Qnty. Non- Rate For Non- OSR Non-Shedule Item

SL.No. Description of Item Unit Item Shedule Item Rate For OSR Shedule Item Amount in Rs. Amount in Rs.

a) 65mm dia pipe

Ground floor Rmt 0 964 -

1st Floor Rmt 0 969 -

2nd Floor Rmt 0 975 -

3rd Floor Rmt 0 980 -

Terrace floor Rmt 0 1012 -

b) 50mm dia pipe

Ground floor Rmt 0 876 -

1st Floor Rmt 0 881 -

2nd Floor Rmt 0 886 -

3rd Floor Rmt 0 891 -

Terrace floor Rmt 164 896 146,944.00

Providing all material, labour,T&P for fitting &

fixing of following water supply fittings of Brass

Ball Valve with jointing materials etc. including

testing the joints with required water pressure. The

cost inclusive of all taxes, duties, transportation,

scaffolding etc. all complete as per

specification & direction of EIC. Make - Zoloto,

a) 65mm dia brass ball valve Nos 0 6729 -

b) 50mm dia brass ball valve Nos 0 3200 -

c) 40mm dia brass ball valve Nos 13 2700 35,100.00

d) 32mm dia brass ball valve Nos 74 1554 114,996.00

e) 25mm dia brass ball valve Nos 67 1250 83,750.00

f) 20mm dia brass ball valve Nos 102 613 62,526.00

Supplying, installing, testing and commissioning

butterfly valves with standard lever confirming to

IS 13039 with necessary connecting fittings like

flanges ,nuts and bolts etc., complete. as per

direction of Engineer- in-Charge. including testing

the joints with required water pressure. The cost

inclusive of all taxes, duties, transportation,

scaffolding etc. all complete as per specification &

5 direction of EIC. Make - Zoloto, Jainsons

Cutting grooves in pucca floors and walls for

taking GI/PVC pipes & making good the damages

6 as per specification complete. Rmt 2280 129 294,120.00

supplying all materials, labour, T&P and cutting

holes through existing brick work including

making good the damages in cement mortar (1:4)

for taking G.I. Pipes and fittings/ P.V.C. pipes

and fittings etc. all Nos 268 36 9,648.00

complete as per P.H. specification and direction of

7 Engineer-in-charge.

Providing all labour ,T&P for cutting holes in

R.C.C floors and roofs for passing G.I / P.V.C

pipes and fittings etc and repairing the holes after

inspection of pipes etc with cement concrete

(1:2:4) including finishing complete so as to make

it leak proof. including cost of all materials, curing,

conveyance, taxes, duties etc. all complete as per

specification Nos 428 110 47,080.00

8 & direction of Engineer-in-charge.

Providing all materials, labour, T&P for fitting and

fixing white glazed vitreous china water closet

(European pattern Coupled Closets) with solid seat

cover ,control plate & Cistern with Lid of standard

quality approved make including supply of sutaible

for EWC bolt & clamp including cost of all taxes

and conveyance as per specification all Nos 142 15540 2,206,680.00

9 complete as per direction of Engineer-in-charge.

JAQUAR- CNS-WHT-963SPP - EWC

JCS-WHT-2400S- CISTERN

JCP-CHR-292415 - CONTROL PLATE

Providing all materials, labour, T&P for fitting and

fixing white glazed vitreous china water closet (PH

toilet - European pattern Coupled Closets) with

solid seat cover ,control plate, grab bar & Cistern

with Lid of standard quality approved make

including supply of sutaible for EWC bolt & clamp

including cost of all taxes and conveyance as per Nos 8 21501 172,008.00

specification all complete as per direction of

10 Engineer-in-charge.

JAQUAR- CNS-WHT-963SPP - EWC

JCS-WHT-2400S- CISTERN

JCP-CHR-292415 - CONTROL PLATE

GRAB BAR 692mm LONG, WHITE -JAGUAR-

Qnty. Shedule Qnty. Non- Rate For Non- OSR Non-Shedule Item

SL.No. Description of Item Unit Item Shedule Item Rate For OSR Shedule Item Amount in Rs. Amount in Rs.

GRAB BAR VERTICAL SWING , WHITE -

JAGUAR- WAC-WHT-BG0800

Providing all materials and labour for fitting and

fixing of following size white glazed vitreous china

wash hand basin of approved make with supply &

fixing of basin bolts & screw,32mm PVC waste

pipe of approved quality including cutting the

walls & floor and making good the damages with

cement concrete (1:2:4) etc. with all taxes, duties, Nos 106 4811 509,966.00

transportation etc. all complete as per direction of

JAQUAR- OPS-WHT-15801- basin

Jaquar - ALD-CHR-769L250X190 -trap

JAGUAR- ALD-CHR-709 - waste coupling

Suplying all materials, labour. T&P for fitting and

fixing white glazed vitreous china ware porcelain

Orissa pattern water closet 580mm x 440mm x

290mm of approved make, confirming to IS-2556

with top inlet for sinking into floor with 100mm

HCI 'P' trap etc. including supply of necessary

cement concrete for fitting the closet etc. complete

in all respect in all floors including cost,

conveyance and taxes of all materials etc. complete

as per specification and as per direction of

Engineer-in-charge.

Make : HINDWARE/PARRYWARE/CERA

WITH ISI MARK Nos 18 8397 151,146.00

JAQUAR- CNS-WHT-OP01 - IWC

WHC-WHT-184NL - CISTERN

40 MM LONG FLUSH PIPE FOR IWC

Providing all materials and labour for fitting and

fixing of following size white glazed vitreous china

wash hand basin of approved make with supply &

fixing of basin bolts & screw,32mm PVC waste

pipe of approved quality including cutting the

walls & floor and making good the damages with

cement concrete (1:2:4) etc. with all taxes, duties, Nos 72 5952 428,544.00

transportation etc. all complete as per direction of

JAQUAR- CNS-WHT-705- under counter basin

Jaquar - ALD-CHR-769L250X190 -trap

JAQUAR- ALD-CHR-709 - waste coupling

Providing all materials , labour ,T&P and fittings

and fixing of different water supply (CP on Brass)

fitting as per IS specification & approved make of

following sizes and specification with leak proof

threaded joints with threadseal tape or any other

method as required, including all taxes, duties,

transportation etc., testing and rectification of

defects after testing complete as per direction of

13 Engineer-in-charge. Make : Hindware/Jaquar.

15mm dia CP Bib cock (short body)with wall

JAGUAR- CON-CHR-037KN

b) 15mm dia CP Angle stop cock with wall flange Nos 448 730 327,040.00

JAGUAR- CON-CHR-053KN

c) 15mm C.P.Pillar Cock Nos 178 1852 329,656.00

JAGUAR-FLR-CHR- 5031NG

d) CP Soap dish Nos 126 1395 175,770.00

JAGUAR-ACN-CHR-1131N

e) CP square Towel Ring Nos 178 1050 186,900.00

JAGUAR-ACN-CHR-1121N

f) CP Toilet Paper Holder Nos 168 646 108,528.00

JAGUAR- ACN-CHR-1151N

g) CP 20mm dia x 610mm long towel rod Nos 51 1173 59,823.00

JAGUAR- ACN-CHR- 1111SM

h) 15mm dia steel braided connection pipe Nos 448 307 137,536.00

JAGUAR- ALD-805B

i) 15mm dia Sink Cock Nos 9 3993 35,937.00

JAGUAR-FLR-CHR- 5166GD

SINK MIXTURE WALL MOUNT(Flr-5163 of

Overhead shower Round shape Multi Flow (ABS

Body) chrome plated with Gray Face Plate)with

Rubit Cleaning System & Shower Arm casted 190

mm long Flat shape for wall mounted Showers

k) with Flange. . (OHS CHR-1995+SHA-CHR-483) Nos 51 2362 120,462.00

l) Wall MIXTURE(FLR-5273UPR OF JAQUAR) Nos 23 4774 109,802.00

m) Conceld stop cock(CON-CHR-078KN) Nos 28 1378 38,584.00

Two-way Bibcock with wall Flange. (As per Cat

n) no.FLR-5041N of Jaquar) Nos 160 1673.3 267,728.00

Qnty. Shedule Qnty. Non- Rate For Non- OSR Non-Shedule Item

SL.No. Description of Item Unit Item Shedule Item Rate For OSR Shedule Item Amount in Rs. Amount in Rs.

Health Faucet ABS SS braided hose 1.00m with

CP hook. (As per Cat

o) no.ALD-CHR-585 of Jaquar) Nos 160 1033.5 165,360.00

32 mm CP Double Coat Hook. (As per Cat

p) no.ACN-CHR-1161N of Jaquar) Nos 168 467 78,456.00

Supplying, Installing, testing and commissioning

stainless 'steel sink with single bowl without drain

board 'manufactured from 1mm thick stainless

steel, 18G 'grade indestructible chrome nickel steel

with top quality 'polish, 1no.40mm dia CP waste

coupling, with 1 no. 40mm 'dia CP bottle trap with

extension pipe, 15mm dia CP sink 'cock with

swivel spout wall mounted type and necessary

'wall flanges etc., complete. Size : 610x510mm ( 4

14 LPM @ 3 bar ) Make - Nirali Nos 9 4992 44,928.00

14a Scrub with all complete accessories Nos 6 30000 180,000.00

Supplying, Installing, testing and commissioning

ceramic labortory sink with 1no.40mm dia CP

waste coupling, with 1 no. 40mm 'dia CP bottle

trap with extension pipe, complete. Size :

Jaquar - ALD-CHR-769L250X190 -trap

JAGUAR- ALD-CHR-709 - waste coupling

Providing all materials , labour ,T&P and fittings

and fixing of Following Size on Extension piece

(S.S/CP on Brass) approved make of following

sizes and specification with leak proof threaded

joints with spun yarn and white zinc or any other

method as required including all taxes, duties,

transportation etc., testing and rectification of

defects after Nos 200 46 9,200.00

testing complete as per direction of Engineer-in-

15mmx65mm C.P./S.S Extension piece

Providing all materials, labour & fitting and fixing

100mm PVC multi floor trap with cement mortar

(1:4) with all taxes, duties etc. all complete as per

specification & direction of Engineer-in-charge.

16 Make - Ashirwad, Astral, Supreme Nos 0 258 -

a) 100mm PVC multi floor trap

Supplying, fixing and testing SS frame and

cover(grating) on PVC 'P' trap with fixed on a

bed of cement concrete with (Heavy duty type)

16a etc., complete. Nos 412 498 205,176.00

Providing all materials, labour, T&P for fitting and

fixing of UPVC SWR pipes (Type-B) confirming

to IS-13592/1992 with latest revision & ISI mark

both below & above ground level or fixing on wall

surface upto 3rd floor roof including scaffolding

wherever necessary with requisite testing. The cost

inclusive of all taxes, transportation, loading &

unloading etc. all complete as per specification &

direction of the Engineer-in-charge. Make :

ASTRAL/ORIPLAST/SUPREME/EQUIVALENT

a 75mm diameter

Ground floor Rmt 0 375 -

1st Floor Rmt 0 378 -

2nd Floor Rmt 0 381 -

3rd Floor Rmt 0 386 -

Terrace floor Rmt 720 391 281,520.00

b 110mm diameter

Ground floor Rmt 158 531 83,898.00

Terrace floor Rmt 1602 548 877,896.00

Providing all materials, labour, T&P, fitting and

fixing of following dia UPVC SWR fittings of

approved make confirming to IS 14735/1992 with

ISI mark both below & above ground level or

fixing on wall surface upto 3rd floor roof including

scaffolding wherever necessary with requisite

testing. The cost inclusive of all taxes,

transportation, loading & unloading etc. all

complete as per specification & direction of the

Engineer-in-charge. Make : Ashirwad/

ASTRAL/ORIPLAST/SUPREME/EQUIVALENT

Qnty. Shedule Qnty. Non- Rate For Non- OSR Non-Shedule Item

SL.No. Description of Item Unit Item Shedule Item Rate For OSR Shedule Item Amount in Rs. Amount in Rs.

c 110mm Cross Tee Nos 678 361 244,758.00

d 110mm Single Tee with door Nos 349 427 149,023.00

e 110mm Single Tee Plain Nos 421 365 153,665.00

f 110mm Plain Bend Nos 348 235 81,780.00

g 110mm Door Bend Nos 497 292 145,124.00

h 110mm Vent Cowl Nos 42 100 4,200.00

i PVC clamp suitable for 110mm dia pipe Nos 975 85 82,875.00

j 110x75 Reducing Y without door Nos 374 387 144,738.00

k 75mm Cross Tee Nos 78 273 21,294.00

l 75mm Single Tee Plain Nos 121 204 24,684.00

m 75mm Plain Bend Nos 58 186 10,788.00

n 75mm Door Bend Nos 87 224 19,488.00

o 75mm Vent Cowl Nos 18 74 1,332.00

p PVC clamp suitable for 75mm dia pipe Nos 725 77 55,825.00

q 75 mm End cap Nos 45 109 4,905.00

s 75 mm threaded cleanout plug Nos 12 163 1,956.00

t 110 mm threaded cleanout plug Nos 54 311 16,794.00

Providing all materials, labour, T&P for fitting and

fixing of UPVC 6 kg/cm2 pressure pipes IS4985

for waste connection from wash basin,kitchen

sinks with latest revision & ISI mark both below &

above ground level or fixing on wall surface upto

8th floor roof including scaffolding wherever

necessary with requisite testing. The cost inclusive

of all taxes, transportation, loading & unloading

etc. all complete as per specification & direction of

the Engineer-in-charge. Make : Ashirwad/

ASTRAL/ORIPLAST/SUPREME/EQUIVALENT

a 40mm dia UPVC pressure pipe

Ground floor Rmt 202 510 103,020.00

b 50mm dia UPVC pressure pipe

Ground floor Rmt 98 570 55,860.00

Qnty. Shedule Qnty. Non- Rate For Non- OSR Non-Shedule Item

SL.No. Description of Item Unit Item Shedule Item Rate For OSR Shedule Item Amount in Rs. Amount in Rs.

Supplying, fixing and testing PVC rain water

collection kurra with leaf trap grating made out of

UPVC with flange complete.(Roof Corner Outlet

Pasted Type Fitting)Make - Ashirwad, Astral,

Cement Concrete (1:4:8) for Terrace pipes

Providing and fixing , testing and commissioning

of white glazed large flat back urinals with

URINAL WITH FIXING ACCESSORIES SET

with SENSOTRONIC CONCEALED TYPE

FLUSHING VALVE FOR URINAL COMPLETE

SET WITH INSTALLATION BOX WITH

CONTROL COCK & FLOW RESTRICTOR

1.4LPF AT 3 BAR PRESSURE with 32mm dia

CP waste coupling with dome type grating, 32mm

dia CP bottle trap with extension pipe, urinal

spreader, SS bolts and nuts to fix the urinal with

hangers and brackets complete with wall flanges

Urinal set -JAGUAR-URS-WHT13253N

Sensor -JAGUAR-SNR-STL51087G

Fixing 600x450mm bevelled edge mirror of

superior glass mounted on 6mm thick A.C sheet or

plywood sheet and fixed to wooden plugs with

Chromium Plated brass screws and washers

complete as per specification and direction of the

23 Engineer in charge Nos 192 723 138,816.00

Providing & Fixing stone slab with Table rubbed,

edges rounded and polished of size 75x50 cm deep

and 18mm thick, fixed in urinal partitions by

cutting a chase of appropriate width with chase

cutter and embedding the stone in the chase with

epoxy grout or with cement concrete 1:2:4 as per

24 direction of Er-in-charge. Nos 88 1344 118,272.00

Qnty. Shedule Qnty. Non- Rate For Non- OSR Non-Shedule Item

SL.No. Description of Item Unit Item Shedule Item Rate For OSR Shedule Item Amount in Rs. Amount in Rs.

Supply,installation,testing and commissioning of

package type RO plant complete with pre-

treatment system NGMF-20 comprising of 01 no

of feed water pumps,dosing systems,RO

membrance,RO high pressure pumps,01 No.of

1000 liters SS treated water storage tank

etc.complete. The unit shall have all interiocking

for safe operation of plant. The unit shall have skid

mounted electrical panel complete with required

starters and shally also have all Annuanciation and

controls. The piping shall be heavy duty PVC. The

filter shall be FRP and pumps shall be of SS/CI

construction. The basis of design shall be for feed

water inlet TDS of 1200 PPM. Contractor is

suggested to cary out the feed water chemical

analysis and ensure suitability of RO plant

25 operation. Make-Ion Exchange.Thermax Nos 1.00 185000.00 185,000.00

Supply,installation,testing and commissioning of 3-

phage 50HZ Electric water heater INTEGRA-

26 S,SPLIT HEAT PUMP +Storage tank Nos 2.00 210169.49 420,338.98

Supply,installation,testing and commissioning of

Grundfos magna 3 25-60 circulatory and pressure

27 regulatory pump Nos 1.00 219032.00 219,032.00

B. EXTERNAL WATER SUPPLY & PUMPS

Providing and fixing to wall or ceiling and floor

pvc pipes class conforming to ASTM-D-1785/89

(Sch-40) and pipe fittings of the following nominal

bore with clamps including making good the wall,

ceiling and floor all complete as per

specification complete.Make : Ashirwad/

ASTRAL/ORIPLAST/SUPREME/EQUIVALENT

a 65 mm dia Rmt 0 962 -

b 65 mm dia Rmt 0 248 -

Supplying, fixing and testing Puddle flanges for

inlet, outlet, vent and overflow pipes, fittings with

D.I frame and cover to overhead water tank and

under ground water tank complete with steps as

2 shown on the drawings etc., complete. Lot 1 301943 301,943.00

i) DI manhole frame and cover (medium duty)

(weight=15 KN.) with locking facility - 14 nos -

(ii)150mm dia - 4 nos -

(iii)80 mm dia - 4 nos -

(iii)100 mm dia -2 nos -

(v) 65 mm dia -8 nos -

(vi) 50 mm dia -8 nos -

(vi) 32mm dia -14 nos -

viI) step ladder (Aluminium ladder) -14 nos -

(vii) 250mm dia -2nos -

(viii) 200mm dia -2 nos -

Supplying, installing, testing and commissioning

butterfly valves with standard lever confirming to

IS 13039 with necessary connecting fittings like

flanges ,nuts and bolts etc., complete. as per

direction of Engineer- in-Charge. including testing

the joints with required water pressure. The cost

inclusive of all taxes, duties, transportation,

scaffolding etc. all complete as per specification &

3 direction of EIC. Make - Zoloto/Audco/Jainson -

Supplying, installing and commissioning approved

make CI /CS flanged brass `Y' strainer with

necessary nuts and bolts, neoprene rubber gaskets,

4 flanges, etc.., complete.- Make- Zoloto/Jainson -

Supplying, fixing in position approved make CI

non-return valve conforming to IS codes with

conplete accessories etc., complete.- Make-

5 Zoloto/Jainson -

Supplying, installing, testing and commissioning

approved make water level controller with alarm

for the Underground Sump. The quoted rate shall

include for necessary wiring in PVC conduit

between the control panel, underground sump and

6 overhead tank.(length of cable approx. 60 mts.) nos 6 3926 23,556.00

Qnty. Shedule Qnty. Non- Rate For Non- OSR Non-Shedule Item

SL.No. Description of Item Unit Item Shedule Item Rate For OSR Shedule Item Amount in Rs. Amount in Rs.

Providing ,fixing , testing and commissioning of

Monoblock type Domestic Water lift pumps set 2

no ’ s (1 Working + 1 Standby) to OHT

Centrifugal End Suction Close Couple pumps of

Water Flow Rate of each pump 40 cum/hr with the

head of 40 MWC adequate the casing shall be cast

iron and impeller shall be Stainless steel the pump

HP capacity shall be provided by manufacturer at

suitable head to work on 3Ph, 50Hz, 400/440V

with necessary unions, flanges, foundation bolts,

RCC footing in 1:2:4 etc. complete. Vendor shall

consider he electrical control panel comprising of

all accessories such as MCB ,isolation valve,non

return valve, pressure switches, pressure

transducers, control wiring & End terminations ,

earth strip of GI 25 x 3 mm,cable tray and any

other necessary imports etc. complete. water

7 supply ( GRUNDFOS) -

1 Working + 1 Stand-by) - Cap : 40Cum/hr @ 40

Pressure switch Nos 2 3000 6,000.00

Pressure guage Nos 2 1000 2,000.00

Control panel Nos 1 50000 50,000.00

Control cable as per OEM Rmt 40 150 6,000.00

Cable tray Rmt 40 750 30,000.00

Providing ,fixing , testing and commissioning of

Monoblock type Flushing Water lift pumps set 2

no ’ s (1 Working + 1 Standby) to OHT

Centrifugal End Suction Close Couple pumps of

Water Flow Rate of each pump 2 cum/hr with the

head of 30 MWC adequate the casing shall be cast

iron and impeller shall be Stainless steel the pump

HP capacity shall be provided by manufacturer at

suitable head to work on 3Ph, 50Hz, 400/440V

with necessary unions, flanges, foundation bolts,

RCC footing in 1:2:4 etc. complete. Vendor shall

consider he electrical control panel comprising of

all accessories such as MCB ,isolation valve,non

return valve, pressure switches, pressure

transducers, control wiring & End terminations ,

earth strip of GI 25 x 3 mm,cable tray and any

other necessary imports etc. complete. (

8 GRUNDFOS) -

(1 Working + 1 Stand-by) - Cap :20 Cum/hr @

Pressure switch Nos 2 3000 6,000.00

Pressure guage Nos 2 1000 2,000.00

Control panel Nos 1 50000 50,000.00

Control cable as per OEM Rmt 40 150 6,000.00

Cable tray Rmt 40 750 30,000.00

Sump pumps (Non-clogging type) in Pump

Supply, installation, testing and commissioning

KIRLOSKAR / GRUNDFOSS / WILO /

XYLEM make open well Submersible type non-

clogging Pump motor set of required drive

(Motor HP), having discharge capacity and

pumping head as described below with all

electrical accessories viz.main switch and starter,

auto on/off system with float arm (with fixed or

flexible arm), over load protection relay, power

cable and control cable from main switch and

starter with auto on-off with dry running protection

to respective motors, earthing having required

M.S. galvanised supporting stay/ clamp etc.

9 complete operational. -

(i) A set of two nos Sump pumps (Non-clogging

type) having discharge capacity of each pump

approx. 10 cum/hr at 15 m. pumping head (1

working, 1 standby) Suction from sumps in

underground pump house, delivery to surface

drain at ground level. Including MCC and allied

works (FIRE & PHE PUMP ROOM) Set of 2 1 200,000 200,000.00

(ii) A set of two nos Sump pumps (Non-clogging

type) having discharge capacity of each pump

approx. 10 cum/hr at 15 m. pumping head (1

working, 1 standby) Suction from sumps in

underground pump house, delivery to surface

drain at ground level. Including MCC and allied

works (STP PUMP ROOM) Set of 2 1 200,000 200,000.00

Supplying, installing and commissioning approved

make brass garden valve necessary nuts and bolts,

neoprene rubber gaskets, flanges, etc.., complete.-

10 Make- Zoloto/Jainson Nos 0 1149 -

Qnty. Shedule Qnty. Non- Rate For Non- OSR Non-Shedule Item

SL.No. Description of Item Unit Item Shedule Item Rate For OSR Shedule Item Amount in Rs. Amount in Rs.

Providing and fixing water meter with direct

reading dial in KL with all integral parts of gun

metal or brass with necessary fitting such as

threaded pieces, unions pressure gauge and

isolation cock,

flanges piece for future removal, flanges/unions

11 complete. Nos 2 8016 16032

Supplying, fitting and fixing G.I. pipes with all

necessary accessories, specials viz. socket, bend,

tee, union, cross, elbo, nipple, longscrew, reducing

socket, reducing tee, short piece etc. fitted with

holder bats clamps, including cutting pipes,

making threads, fitting, fixing etc. complete in all

respect including cost of all necessary fittings as

required,jointing materials and two coats of

painting with approved paint in any position above

ground. (Payment will be made on the centre line

measurements of total pipe line including all

specials. No separate payment will be made for

accesories, specials. Payment for painting will be

12 made seperately) -

100 mm dia SUMP PUMP DISCHARGE LINE Metre 42 1,350 56,700.00

Qnty. Shedule Qnty. Non- Rate For Non- OSR Non-Shedule Item

SL.No. Description of Item Unit Item Shedule Item Rate For OSR Shedule Item Amount in Rs. Amount in Rs.

C. EXTENAL SEWAGE

Providing all materials, labour, T&P for fitting and

fixing of UPVC 6 kg/cm2 pressure pipes IS4985

for waste connection with latest revision & ISI

mark both below & above ground level or fixing

on wall surface upto 2nd floor roof including

scaffolding wherever necessary with requisite

testing. The cost inclusive of all taxes,

transportation, loading & unloading etc. all

complete as per specification & direction of the

Engineer-in-charge. Make: Ashirwad/

ASTRAL/ORIPLAST/SUPREME/EQUIVALENT

iii 315 mm dia R/M 0 2242 -

iv 280 mm dia R/M 0 959 -

vi 200 mm dia R/M 0 795 -

viii 110 mm dia R/M 0 374 -

Providing all materials, labour, T&P required for

construction of RCC M-25 man hole chamber of

following sizes having cube strength 250 Kg/cm2

at 28 days confirming to IS-456/2000 & IS-3370

at all locations & height using h.g. stone aggregate

(Crusher broken) of 20mm & down size including

machine mixing, lifting, hoisting, conveying,

placing in position, mechanical consolidation,

curing, de-watering (if required). The minimum

thickness of RCC base slab, all side walls & roof

slab shall be not less than 150mm & 125mm (avg.)

respectively. The cost shall be inclusive of rigid,

levelled & plumbed centering & shuttering to

required slope, allignment & size for all kinds of

RCC work with steel/ ply centering materials with

all bracing, ties, anchorage & supports and

removing the same after required paid & placing

M.S.Reinforcement HYSD bar of required dia

including cutting, bending, straightening of

approved quality as per approved design &

drawing & tying the grills for RCC works &

placing in position using binding wires (18 to 20

2 gauge soft drawn & cold annealed).

PCC 1:3:6 with 40mm size h.g.c.b. metal of

100mm thick, moulding & shaping the channel &

benching with C.C. 1:2:4 with 12mm size h.g.c.b.

chips, 12mm thick cement plaster 1:3 with cement

punning on inner wall surface, earth work

excavation in all types of soil/rock including

cement concrete cutting as per site condition,

filling the foundation base with sand duly watered

& rammed, providing, fitting & fixing of pre-cast

factory made man hole cover with frame (SFRC

medium duty) for clear opening 500mm dia,

providing, fitting & fixing of poly propylene steel

reinforced man hole steps of approved quality &

size in two parallel line of 300mm spacing in

vertical wall with centre to centre 375mm

(staggered) etc.all complete as per specification &

direction of EIC.

Manhole chamber of Inner size 900mmx1200mmx

a) 900mm depth. NOS 0 23332 -

Extra for every additional depth of 0.10mtr. or part

there of manhole size 900mmx1200mm from

b) 900mm depth upto 2500mm depth. NOS 0 12713 -

Manhole chamber of Inner size 900mmx900mmx

c) depth upto 1500 mm NOS 25 25000 625,000.00

Manhole chamber of Inner size 600mmx600mm

d) with heavy duty cover NOS 0 16728 -

Manhole chamber of Inner size450mmx450mmx

e) depth upto 1500 with heavy duty cover NOS 9 5343 48,087.00

Supplying all materials, labour, T&P and

constructing Gully Trap chamber of the following

inside size with 8cm thick R.C.C precast cover

slab in cement concrete (1:2:4) mix using 12mm

size h.g chips, foundation concrete (1:4:8) using

40mm size hard granite metal on bed and around

trap, Fly ash brickwork in c.m (1:6) in F&P and

inside 12mm thick cement plastering (1:3) finished

with a floating coat of neat cement including

fixing 100mmx100mm size HCI gully

trap,150mmx150mm size C.I grating etc all

complete as per approved drawing, specification

2A and direction of the Engineer in charge

Gully trap chamber (250x250MM) wth rcc cover

TOTAL 958326.40

D. WATER TREATMENT PLANT - 12 CUM/HR

Qnty. Shedule Qnty. Non- Rate For Non- OSR Non-Shedule Item

SL.No. Description of Item Unit Item Shedule Item Rate For OSR Shedule Item Amount in Rs. Amount in Rs.

Design, Supplying, installing, testing and

commissioning of water teratment plant (WTP).

1 With below mentioned specifications.

Pressure sand filter of FRP construction with

necessary equipment complete with Frontal piping,

valves, suitable supports for mounting, pressure

guage, orifice plate, filtering media, etc..,complete

as per the detailed specification for the efficient

working of system.

a) Maximum working Pressure shall be

b) Back wash duration - 15 minutes.

c) Pressure Drop across unit. - 1.0kg / sq.cm

1.1 d) Maximum Test pressure - 7.0kg / sq.cm.

Velocity @ 12 m3/hr/m2 - 1200 dia vessel- FRP

Activated carbon filter of FRP construction with

necessary equipment complete with Frontal piping,

valves, suitable supports formounting, pressure

guage, orifice plate, filtering media, etc..,complete

as per the detailed specification for the efficient

working of system.

a) Maximum working Pressure shall be

b) Back wash duration - 15 minutes.

c) Pressure Drop across unit. - 1.0kg / sq.cm

1.2 d) Maximum Test pressure - 7.0kg / sq.cm.

Velocity @ 12 m3/hr /m2 - 800 dia vessel - FRP

Water softener of FRP construction with

necessary Ancillary equipment complete with

piping, valves, ejector, orifice plate, suitable

support for mounting Pressure gauge, Orifice

plate, salt saturator made of corrosion resistant

material and hardness testing kit etc.,Softener also

include initial charge of indion 220NA resin media

to suite the requirement etc., complete as per

detailed specification for the efficient working of

a) Max. working pressure = 3.5Kg / Sqcm.

b) Maximum Test pressure - 7.0kg / sq.cm.

1.3 FRP vessel 800 mm dia with MPV Nos 1 270,000.00 270,000.00

Electronic dosing system for disinfection by

chlorination & with pre set dosage based on the

quantity of water. The dosing system shall consists

1.4 of electronic dosing pump with positive

displacement type with adjustable stroke length

with frequency. The quoted rate shall also include Nos 1 25,000.00 25,000.00

Centrifugal monoblock pumps for filter feed water

inside the pump room. The cost of control panel to

1.5 be included with 2 Nos DOL starter. The pumps

shall run 415V / 50HZ electric supply etc., Set 1 35,000.00 70,000.00

Inter units connection piping with necessary

flanges, bolts, nuts, neoprene gaskets, welding

1.6 wherever necessary, with necessary control valves,

non return valves etc and with one coat of primer

and two coats of approved enamel paint LS 1 145,000.00 145,000.00

ABSTRACT ESTIMATE FOR ELECTRICAL WORK FOR UP GRADATION OF DISTRICT HEADQUARTER HOSPITAL WITH 100 BEDS, ICU &

TRAUMA CARE FACILITY AT ANGUL DISTRICT, ODISHA.

SL.No. Description of Item OSR Amount in Rs. Non-Shedule ItemAmount in Rs. Total Amount in Rs.

SL.No. Description of Item OSR Amount in Rs. Non-Shedule ItemAmount in Rs. Total Amount in Rs.

i. Electrical , Data Networking & Telephone(IP EPBAX) 23595986.00 5647170.00 29243156.00

iii. Nurse Calling System 958250.00 958250.00

iv. Building Management Systems 8948900.00 8948900.00

Qnty. Shedule Qnty. Non- Rate For Non- OSR Non-Shedule Item

SL.No. Description of Item Item Unit

Shedule Item Rate For OSR Shedule Item Amount in Rs. Amount in Rs.

Qnty. Shedule Qnty. Non- Rate For Non- Non-Shedule Item

SL.No. Description of Item Unit Item Shedule Item Rate For OSR Shedule Item OSR Amount in Rs. Amount in Rs.

A. INTERNAL & EXTERNAL ELECTRICAL WORKS WIH DATA N/W, IP EBAX SYSTEM

A. Circuit Cum Wiring

Wiring for light point/ fan/ exhaust fan point/ call

bell point with 1.5 sqmm FRLS PVC insulated

copper conductor single core cable in surface /

recessed 2 mm thick PVC conduit with modular

switch and earthing the point with 1.5 sqmm FRLS

PVC insulated copper conductor single core cable

including providing modular box with cover of

requisite number of modules including providing

1 cover plates as required.

Single light point controlled by one 6A switch or

a) first light point of group control. Each 1106 622.00 687,932.00

b) Subsequent point of group control Each 660 352.00 232,320.00

Wiring for light point/ fan/ exhaust fan point/ call

bell point with 1.5 sqmm FRLS PVC insulated

copper conductor single core cable in surface /

recessed 2 mm thick PVC conduit with modular

switch and earthing the point with 1.5 sqmm FRLS

PVC insulated copper conductor single core cable

including providing modular box with cover of

requisite number of modules including providing

2 cover plates as required.(Excluding rate of MCB)

Single light point controlled by one 6A MCB or

a) first light point of group control. Each 16 666.00 10,656.00

b) Subsequent point of group control Each 12 354.00 4,248.00

Supplying and fixing two module steeped type

electronic fan regulator with proper modular plate

3 switch box including connections etc. as required. Nos 271 475.00 128,725.00

Supplying and fixing 6 Amp plug with 6 Amp

4 switch (Modular Type) on existing board. Nos 124 405.00 50,220.00

Supplying & fixing suitable size GI Box with

modular plate and cover in front on surface or in

recess, including providing and fixing 3pin 5/6

amps modular socket outlet and 5/6 amps modular

5 switch etc. as required. Nos 271 374.00 101,354.00

Supply, installation, testing & commissioning of 6 /

16 Amp Plug Boards consisting of a 16 Amp clip-

in type modular switch with indicator and a 6/16

Amp clip-in type modular shuttered plug socket

fixed on metallic concealed box including

interconnections and making good the damages

caused complete as required and as per direction

6 of Engineer-in-charge. Nos 244 508.00 123,952.00

Supplying, installation, testing & commissioning of

20 Amp AC starter switch with 25 Amp modular

socket outlet with 25 Amp Plug on surface or in

recess, on 2 Nos two module GI box with plate

etc. complete with direction of Engineer-in-charge.

Starter-Crabtree(cat no-ACT0202504) or

Wiring for circuit/ submain wiring along with earth

wire of following size of FRLS heavy gauge PVC

insulated copper conductor single core cable in

heavy duty PVC conduit laid in surface/ recess as

a) 2X2.5 + 1X2.5 sqmm FRLS Cu wire Mtr 7400 96.00 710,400.00

b) 2X4 + 1X4 sqmm FRLS Cu wire Mtr 5570 121.00 673,970.00

c) 2X6 + 1X6 sqmm FRLS Cu wire Mtr 3250 153.00 497,250.00

d) 4X10 + 2X6 sqmm FRLS Cu wire Mtr 2660 413.00 1,098,580.00

B. Fan & indoor Fixtures

Supply, delivery and fixing of Ceiling fan hook

box made out of 18 swg GI sheet and containing

10 mm dia round ms bar projecting atleast 150mm

on either side & duly bent to accommodate ceiling

fan down rod bolt & having earthing arrangement

9 as per direction of Engineer-in-charge. Each 271 120.00 32,520.00

Supplying, installation, testing and commissioning

following type of light fixtures with dummy box

for surface mounted fixtures only, fans and exhaust

fans with all accessories, as required.(The colour

temprature for fixtures shall be between 3500 deg

K & white in colour as per application) ( Use

10 antibacterial UV Light for blood bank rooms.)

Fully diffused type recessed mounted 2'X2' LED

fitting (3000 Lumen/ 25W) similar to PHILIPS

(CAT No:RC380B LED25S -6500 G4 L60 W60

a) PSU OD) / Equivalent of Crompton/ Wipro. Each 970 4,723.00 4,581,310.00

Fully diffused type recessed mounted 1'X1' LED

fitting (2000 Lumen/ 18W) similar to PHILIPS

(CAT No:RC375 LED 15S 18 WATT CW) /

b) Equivalent of Crompton/ Wipro. Each 70 1,587.00 111,090.00

Qnty. Shedule Qnty. Non- Rate For Non- OSR Non-Shedule Item

SL.No. Description of Item Unit Item Shedule Item Rate For OSR Shedule Item Amount in Rs. Amount in Rs.

Fully diffused type recessed mounted 6"X6" LED

fitting (1800 Lumen/ 18W) similar to PHILIPS

(CAT No:DN177 LED 15S 18 WATT CW ) /

c) Equivalent of Crompton/ Wipro. Each 62 820.00 50,840.00

Commercial Batten type wall mounted 4' LED

fitting (2200 Lumen/ 20W) similar to PHILIPS

(CAT No:BN021C LED20S PSU CW GR S2) /

d) Equivalent of Crompton/ Wipro. Each 162 1,064.00 172,368.00

Retail Down type LED Light surface fitting (1800

Lumen/ 16 W) similar to PHILIPS (CAT

No:SM251C LED16S- 6500 PSU WH) /

e) Equivalent of Crompton/ Wipro. Each 40 2,226.00 89,040.00

10 watt LED Light surface fitting with batten/angel

Holder similar to PHILIPS (CAT No:Base B22) /

f) Equivalent of Crompton/ Wipro. Each 146 414.00 60,444.00

Endura type 700 Lumen/10W LED Bulkhead wall

fitting PHILIPS (CAT No:WT140W LED7S CW

g) PSU S1 PC)/ Equivalent of Crompto/ Wipro. Each 28 1,237.00 34,636.00

5 mtr Blue/white Cove fitting/strips PHILIPS

(CAT No:31308 led strip - blue/white)/ Equivalent

h) of Crompto/ Wipro. Nos 35 1,866.00 65,310.00

Infrared,Surface Mounted PIR occupancy Sensor

on false ceiling, compatible with the existing LED

fixtures ( as per Crabtree Model No. ST46B /

i) Equivalent of Crompton/ Wipro/ Philips Nos 360 2,865.00 1,031,400.00

Supplying and fixing call bell/ buzzer suitable for

j) single phase,230 V, complete as required. Each 30 151.00 4,530.00

Supplying, installation, testing and commissioning

of ceiling fan (5 star rating) including wiring the

down rod, earthing etc as required (Make :

11 Bajaj/Usha/ Crompton/ Orient/ Khaitan/ Havells).

Supplying, installation, testing and commissioning

of wall mounted fan (5 star rating) including

earthing etc as required (Make : Bajaj/Usha/

12 Crompton/ Orient/ Khaitan/ Havells).

Supplying, installation, testing and commissioning

of Heavy Duty Exhaust fan (5 star rating) including

louvres, Ceiling Rose & Electric Connection as

required. (Make -Bajaj/Usha/ Crompton/ Orient/

13 Khaitan/ Havells)

C. External Light Fittings

Supplying, installation testing and commissioning

following type of light fixtures with all accessories,

14 as required.

60 Watt Outdoor LED Luminaires Street Light

(6500 lumen) PHILIPS (CAT No:Make: Philips

BRP062 LED 65 CW SLA S1 PSU) / Equivalent

of Crompton/ Wipro connected to 32 MM Dia 800

mm GI bend pipe fixed on Wall or column with GI

a) Clamps & hard ware etc. as required. No 15 7,007.00 105,105.00

Gate Light (Make: Bajaj Spigot for BJMPTI 125

MV LPF CAT No: HPMV 125 W or equivalent of

Philips/ Crompton/ Wipro)along with loose wire

box, connectors with one 10A MCB as required

suitable for operation on 240 Volt AC supply as

35 watt integral flood light with driver inside a

PDC housing Led Light (Philips BVP120 LED 35

CW FG S1 PSU GR) / Equivalent of Crompton/

Wipro)along with CC/bricks pedestal & loose wire

box, connectors 50 MM Dia 4 mtr Height GI

Tubular Pole with one 6A MCB for loop in loop

c) out type as required. No 22 10,898.00 239,756.00

Supplying, installation, testing & commissioning of

LED Aviation light luminaries including required

driver/ control box, protections, above the highest

point of terrace level and making good the same. It

should switch ON automatically as required in

night time & OFF in day time including FRLS

copper control wiring etc. complete in all respect

as required & as approved by the Engineer

Incharge. (Cat . No. Bajaj BGAV 302 LED or

d) equivalent from approved makes/ CLIENT). No 1 13,465.00 13,465.00

D. Panels, MDBs, DBs. MCBs

Qnty. Shedule Qnty. Non- Rate For Non- OSR Non-Shedule Item

SL.No. Description of Item Unit Item Shedule Item Rate For OSR Shedule Item Amount in Rs. Amount in Rs.

Supply, installation, testing and commissioning of

cubicle type sectionalised, front operated top entry

dust and vermin proof M.V.Panel Boards suitable

for operation at 415V, 3 phase, 4 wire, 50Hz

distribution system fabricated out of 2.0 mm thick

CRCA sheet, insulated busbar with heat

shrienkable PVC sleeve, base channel, wiring with

space heater, thermostat and control MCBs shall

be provided for all vertical sections of main LT

Panel, all hinged door shall be earthed through 2.5

sq mm tinned braided, the incoming and outgoing

feeders shall be accommodated in a modular

arrangement, detachable gland plates, adequate

size cable alley, Sign writing, Painting, Earthing,

Numbering, Danger plate, including PVC insulated

copper FRLS wires of minimum 1.5 sq.mm & 2.5

sq.mm for CT's etc. with all accessories including

interconnections, earth bus, Surge protection

Device(SPD) etc. as required.(All the incomers of

the panel must be mounting with RS 485

communication port for BMS Compartibility)

LT PANEL(To be installed in Electrical Panel

15 Room) Zone-(Z1&Z2)

Busbar -1600 Amp Al busbar with SC rating of 50

KA suitable for operation at 415 Volt, 50 Hz, 3

One (1)-Incomer feeders from Raw+DG Supply

Panel is consisting of

One (1) - 415V, 1250 A, 50KA, TPN, MDO Type

ACB with microprocessor controlled OL/ SC and

EF releases, shunt trip release, auxilliary contacts

and terminals taken out suitable for bustrunking

termination as required.

One(1)- Multifunction digital meter suitable for

three phase four wire system, unbalanced loading

CL 1.0, flush mounting with RS 485

communication port for reading Voltage, Current,

pf. KW, KWH, KVA, KVAr, KVAh,

KVArHr(BMS Compartibilty)

One set - Indicating lamp for ON/OFF/Trip and

Phase indication with control fuse/ MCB.

One(1) set of 1250/5A ,15VA , Cl 1.0, CTs.

One(1) Digital Ammeter with S/S.

One(1) 0-500V Digital Voltmeter with S/S.

Two (2) - Outgoing Feeders (For one HVAC

Panel and One Spare) each comprising of

One (1) - 415V, 800 A, 50KA, TPN, MDO Type

ACB with microprocessor controlled OL/ SC and

EF releases, shunt trip release, auxilliary contacts

and terminals taken out suitable for bustrunking

termination as required.

One(1)- Multifunction digital meter suitable for

three phase four wire system, unbalanced loading

CL 1.0, flush mounting for reading Voltage,

Current, pf. KW, KWH, KVA, KVAr, KVAh,

One set - Indicating lamp for ON/OFF/Trip and

Phase indication with control fuse/ MCB.

One(1) set of 800/5A ,15VA , Cl 1.0, CTs.

One(1) Digital Ammeter with S/S.

One(1) 0-500V Digital Voltmeter with S/S.

Three (3) - Outgoing Feeders (For one Medical

Equipment Panel and Two Spares) each

One (1) - 250A,TPN, 36KA,MCCB

One(1) set of – 250/5A , 15VA , CL 1.0, CT

One (1) - 3 Ph Digital Ammeter.

One Set ON/OFF Indicating lamp with control

fuse/ MCB with required other accesories.

Four(4) - Outgoing Feeders (For one Fire

Fighting Panel, Two nos 60KVA UPS-1&2 I/C

Breakers(NB: the I/C Breakers of both UPS and

Fire Fighting Panel are considered only in Zone-

Z1 LT Panel instead of Zone-Z2 LT Panel ) and

one Spare) each comprising of

One (1) - 160A,TPN, 36KA,MCCB

One(1) set of – 160/5A , 15VA , CL 1.0, CT

One (1) - 3 Ph Digital Ammeter.

One Set ON/OFF Indicating lamp with control

fuse/ MCB with required other accesories.

Five (5) - Outgoing Feeders (For 4 nos Floor

Distribution Panel- GF to 3rd Floor (Z1) (NB:

4nos FDP -1 ,3,5,7 are considered in Z1 LT

Panel as well as FDP 2,4,6, 8 are Considered in

Z2 LT Panel) and one Spare) each comprising

One (1) - 100A,TPN, 36KA,MCCB

One(1) set of – 100/5A , 15VA , CL 1.0, CT

One (1) - 3 Ph Digital Ammeter.

One Set ON/OFF Indicating lamp with control

fuse/ MCB with required other accesories.

Qnty. Shedule Qnty. Non- Rate For Non- OSR Non-Shedule Item

SL.No. Description of Item Unit Item Shedule Item Rate For OSR Shedule Item Amount in Rs. Amount in Rs.

Three (3) - Outgoing Feeders (For One PHE

Panel (NB: Only Considered in ZoneZ1 LT

Panel not in Z2 LT Panel) and Two Spares)

each comprising of

One (1) - 63A,TPN, 36KA,MCCB

One(1) set of – 63/5A , 15VA , CL 1.0, CT

One (1) - 3 Ph Digital Ammeter.

One Set ON/OFF Indicating lamp with control

fuse/ MCB with required other accesories.

Four (4) - Outgoing Feeders (For 3 nos Lift

Panel-1,2&3, and One Spare) each comprising

of (NB: 4,5&6 Lift Panels are considered in

One (1) - 32A,TPN, 36KA,MCCB

One(1) set of – 32/5A , 15VA , CL 1.0, CT

One (1) - 3 Ph Digital Ammeter.

One Set ON/OFF Indicating lamp with control

fuse/ MCB with required other accesories.

Two (2) - Outgoing Feeders (For One External

Lighting Feeder Pillar Panel-1 and One Spare)

each comprising of (NB: External Feeder Pillar

Panel-2 is considered in Zone-Z2 Panel)

One (1) - 32A,TPN, 36KA,MCCB

One(1) set of – 32/5A , 15VA , CL 1.0, CT

One (1) - 3 Ph Digital Ammeter.

One Set ON/OFF Indicating lamp with control

fuse/ MCB with required other accesories.

One (1) 32 Amp TP contactor, over load trip,

Programmable timer for automatic switching ON

and OFF of external lighting, Auto/ Manual

selector switch, Auxilliary Contactor, ON/OFF

push button and indication along with control fuse

etc as required(for feeder Pillar only).

*The Switchboard shall be complete with all

interconnections, risers, internal wiring, labels,

control/circuit fuses etc. complete as required.

Battrey/Battrey charger

Supplying, installing, testing and commissioning of

230 V, Single Phase, 50 HZ, AC operated suitable

capacity (capacity to be decided after selecting the

Makes of Material for switchgears) AH battery

with Battery Charger for DC supply of following

rating with Boost and trickle charging facility and

protection from over charging a DC DB with

required numbers of outgoing DP MCB's plus 2

Nos. of 16 Amp. DP MCB's as spare feeders

complete as required and as per specifications.

PANEL AS ABOVE Set 2 1,405,100.00 2,810,200.00

FLOOR DISTRIBUTION PANEL(FDP) -

One (1) Incomer - 100 Amp, 25 KA, FP MCCB

with 3 Nos Phase indicating lamps with control

fuse/ MCB Digital Voltmeter and Ammeter with

selector switch .(with required other accesories.)

Busbar - 160 Amp Al busbar suitable for

operation at 415 Volt, 50 Hz, 3 Phase Supply.

Five(5) - Outgoing Feeders for (3 nos LDBs &

Two spares) each Comprising of

One (1) -32A TPN 25KA MCCB with required

other accesories.

Seven (7) - Outgoing Feeders for (3 No PDBs, 3

no ACDBs & One spare) each Comprising of

One (1) -63A TPN 25KA MCCB with required

other accesories.

PANEL AS ABOVE Set 8 182,300.00 1,458,400.00

17 UPS PANEL(O/G)

Two (2) nos Incomer- 160 Amp TPN ,25 KA

MCCB with 3 Nos Phase indicating lamps with

control fuse/ MCB Digital Voltmeter and Ammeter

with selector switch with other required

Busbar - 200 Amp,25KA Cu TP2N busbar

suitable for operation at 415 Volt, 50 Hz, 3 Phase

Ten(10) - Outgoing Feeders for (3 Nos of

SubUPS Panel- 1,2,3,4,5,6,7,8, One Server

Rack & One spare) each Comprising of

One (1) - 63 Amp 4P, 10 KA MCB (C-Curve)

Five(5) - Outgoing Feeders for (One Solar

Inverter, One CCTV, One Fire Alarm wih PA

System, One ELV System & One spare ) each

One (1) - 32 Amp DP, 10 KA MCB (C-Curve)

PANEL AS ABOVE Set 1 65,000.00 65,000.00

18 SUB UPS PANEL(Each Floor Wise)

Qnty. Shedule Qnty. Non- Rate For Non- OSR Non-Shedule Item

SL.No. Description of Item Unit Item Shedule Item Rate For OSR Shedule Item Amount in Rs. Amount in Rs.

One (1) no Incomer- 63 Amp FP ,10 KA MCB

with 3 Nos Phase indicating lamps with control

fuse/ MCB Digital Voltmeter and Ammeter with

selector switch with required other accesories.

Busbar - 100 Amp,10KA Cu TP2N busbar

suitable for operation at 415 Volt, 50 Hz, 3 Phase

Four(4) - Outgoing Feeders for (3 Nos of

UPSDB- 1,2,3 & One spare) each Comprising

One (1) - 32 Amp 4P, 10 KA MCB (C-Curve)

Three(3) - Outgoing Feeders for (Two nos DP

DB for Medical instruments & One spare) each

One (1) - 32 Amp DP, 10 KA MCB (C-Curve)

PANEL AS ABOVE Set 8 40,600.00 324,800.00

19 UPS Incomer -1&2

One (1) no 160 Amp TPN ,36 KA MCCB with

required other accessories & suitable metal

enclosure concealed in wall for power supply to

20 Feeder Pillar for External Lights

Supplying installation testing commissioning if

double door feeder pillar fabricated out of 2 mm

thick CRCA sheet duly painted, 200 Amp Al

busbar with neutral bus rincluding cc/ brick

foundation as required including following internal

1 No - 32 Amp TPN MCB Incomer (C-Curve)

4 Nos - 16 Amp SP MCB Outgoing (C-Curve)

1 No - 16 Amp SP MCB with 6/16 Amp socket

outlet with 10 Amp modular switch and 1 No-

Bracket Holder with 6 Amp Modular switch. Set 2 22,000.00 44,000.00

Supplying and fixing following way, horizontal

type three pole and neutral, sheet steel, MCB

distribution board, 415 V, on surface/ recess,

complete with tinned copper bus bar, neutral bus

bar, earth bar, din bar, interconnections, powder

painted including earthing etc. as required. (But

without MCB/RCCB/Isolator). (For all Floors

21 LDBs, PDBs, ACDBs & UDBs)

a) 6 way, Double door(4+18) Each 96 3,693.00 354,528.00

Supplying and fixing following way, single pole

and neutral,sheet steel, MCB distribution board,

240 V, on surface/ recess, complete with tinned

copper bus bar, neutral bus bar, earth bar, din bar,

interconnections, powder painted including

earthing etc. as required. (But without

22 MCB/RCCB/Isolator)

a) 6 way, Double door Each 8 1,661.00 13,288.00

Supplying and fixing following rating MCBs/

Isolator in the existing MCB DB complete with

connections,testing and commissioning etc. as

a) 63 Amps, FP 10 KA MCB (C-Curve) Each 48 2,042.00 98,016.00

b) 32 Amps, FP 10 KA MCB (C-Curve) Each 48 1,461.00 70,128.00

c) 32 Amps, DP 10 KA MCB (C-Curve) Each 8 704.00 5,632.00

d) 6 Amp to 32 Amp, 10 KA SP MCB (C-Curve) Each 1776 278.00 493,728.00

D. Cables, Cable Laying & Termination

Supplying & Testing of 1.1 KV grade Aluminium

XLPE power cable of following size suitable for

24 415 Volt, 3Ph, 50 c/s supply.

Supplying & Testing of 1.1 KV grade Cu XLPE

Un Armoured(Flexible) power cable of following

25 size suitable for 415 Volt, 3Ph, 50 c/s supply.

Laying of one number PVC insulated and PVC

sheathed/XLPE power cable of 1.1KV grade of

following size direct in ground including

excavation (75 cm),sand cushioning,protective

26 covering and refilling the trench etc as required.

b) Above 35 sq. mm and upto 95 sq. mm Mtr 40 338.00 13,520.00

c) Above 95 sq. mm and upto 185 sq. mm Mtr 20 352.00 7,040.00

d) Above 185 sq. mm and upto 400 sq. mm Mtr 220 396.00 87,120.00

Qnty. Shedule Qnty. Non- Rate For Non- OSR Non-Shedule Item

SL.No. Description of Item Unit Item Shedule Item Rate For OSR Shedule Item Amount in Rs. Amount in Rs.

Laying of One No. PVC insulated and PVC

sheathed/XLPE power cable of 1.1 KV grade of

following size in the existing

RCC/HUME/MASONERY TRENCH/HDPE

Pipe/Metal Pipe/On Wall Surface(Clamped with

saddle/PVC & UPVC Pipe)/ CableTray as

b) Above 35 sq. mm and upto 95 sq. mm Mtr 600 104.00 62,400.00

c) Above 95 sq. mm and upto 185 sq. mm Mtr 40 122.00 4,880.00

d) Above 185 sq. mm and upto 400 sq. mm Mtr 466 182.00 84,812.00

28 TERMINATION OF CABLES

Supply & Making end Termination with brass

compression gland and Cu/aluminium lugs for

PVC insulated and PVC sheathed cable of 1.1 kv

grade (without cost of Cable)

Supply & making of Sigle Compression cable

glands and crimping type Cu. cable lugs with

required tools and equipments as per IS. The

29 glands and lugs shall be suitable for 2XY cables.

Providing,fixing and laying of fallowing dia HDPE

pipe (medium class) in ground complete with

fitting incl. trenching(75 mm depth)and refilling as

per direction of Engg.-in-Charge. Ncessary test

report & Warrnaty certificate to be submitted to

the department for genuinity of product & to avail

free after sales service within warranty period for

30 acceptance of materials.

a) 50 mm dia (for Gate crossing) Mtr 25 324.00 8,100.00

b) 200 mm dia (for Road crossing) Mtr 100 828.00 82,800.00

Supply, fabricating and installing following size of

hot dip G.I. perforated type cables trays including

suspending from ceiling with angle, rods

connection pieces, horizontal vertical bends,

reducers, tees, cross members,G.I. nut bolts, G.I.

washers, fasteners etc. complete as required per

specifications & approved by the Engineer

a) 150 mm (W) X 50 mm depth X 1.6 mm thickness Mtr 520 273.00 141,960.00

450 mm width X 50 mm depth X 1.6 mm

Supply, Installation, Testing & Comissioning of

Hipulse U, Fully digital, twin DSP controlled 2X60

Kva (make: APC, Emersion, Riello or equivalent)

IGBT based True On- line double conversion

Technology Smart UPS System with(3-Ph In & 3-

Ph out) VRLA Sealed maintenance free battery

with independent 12V units cell banks of capacity

designed for end cell 12V/150 AH X 34 nos each

UPS for 30 Min Back Up with One Paralleling Kit

, inbuilt isolation transformer, Rack, IRIT &

32 Interlink Cable included. Each 1 2,304,121.00 2,304,121.00

F. Lightning Protection System (Arrestor)

Providing and fixing of lightning conductor finial,

made of 25mm dia 300 mm long, Copper tube,

having single prong at top, with 85 mm dia 6 mm

thick copper base plate including holes etc. Along

33 with Test junction complete as required. Each 46 7,400.00 340,400.00

Supply & Fixing of Copper plate Earthing

(600x600x3mm thick) including accessories, and

providing masnory enclosure with cover plate

having locking arrangement and watering pipe of

2.7 meter long etc. with charcoal/coke and salt as

Providing and fixing 25 mm X 5 mm copper strip

in 40 mm dia GI pipe from earth electrode

including connection with brass nut, bolt, spring,

35 washer excavation and refilling etc. as required. Mtr 180 1,224.00 220,320.00

Providing and fixing 25 mm X 5 mm dia copper

strip on wall/surface or in recess for connection

Providing and fixing 4.0 mm dia cu wire on

37 surface or in recess for loop earthing as required. Mtr 2360 128.00 302,080.00

Qnty. Shedule Qnty. Non- Rate For Non- OSR Non-Shedule Item

SL.No. Description of Item Unit Item Shedule Item Rate For OSR Shedule Item Amount in Rs. Amount in Rs.

Data Net Working, Telephone(IP EPBAX) &

SITC of dual port, 3X3 , 86x86 mm Square

faceplate with dust cover, snap in frame, white for

I/O fixing at user side with wall mount box for

Data and Voice and Cat 6 I/O UTP SL series

Jackwith Strain relief and bend limiting boot,

Exceed TIA/EIA-568-C.2 and ISO/IEC 11801

standards for Category 6/Class E component

performance. (complete set)

38 Panduit/Corning/Commscope No 210 515.00 108,150.00

SITC of U/UTP Cat 6 Patch cord. Should confirm

or exceed the ANSI/TIA 568 C.2 standards for

CAT 6, 24 AWG Factory terminated RJ 45 plugs

at both ends, Option for colour – Grey, Blue, Red

& Green . Patch cord material should be LSZH

IEC 60332-1, ETL certified. Compliant to IEC

60603-7 and UL 1863. Patch cord should support

retro-fit patch lock & key mechanism for secured

39 connections, 1 Mtr (Panduit/Corning/Commscope) No 210 195.00 40,950.00

SITC of U/UTP Cat 6 Patch cord. Should confirm

or exceed the ANSI/TIA 568 C.2 standards for

CAT 6, 24 AWG Factory terminated RJ 45 plugs

at both ends, Option for colour – Grey, Blue, Red

& Green . Patch cord material should be LSZH

IEC 60332-1, ETL certified. Compliant to IEC

60603-7 and UL 1863. Patch cord should support

retro-fit patch lock & key mechanism for secured

40 connections, 2 Mtr (Panduit/Corning/Commscope) No 210 225.00 47,250.00

SITC of 4 pair U/UTP CAT 6 23 AWG cable ETL

verified to ANSI/TIA 568.2-D and ISO/IEC

11801, Shall meet IEEE 802.3bt (type 4) for

4PPoE transmission, Certified by independent test

lab i.e ETL / Intertek for 4 connector channel

performance tested upto 600Mhz, LSZH sheath as

per IEC 60332-3, max DC resistance 7.61

Ohm/100m to be installed in the existing surface/

recessed steel/ PVC conduit/raceway as required

41 (Panduit/Corning/Commscope) Box 50 8,500.00 425,000.00

SITC of 19", 1U height Category 6 U/UTP Loaded

Patch Panel, 24 port, UL listed. The information

Outlets shall be individually replaceable from the

panel ports. each port should have strain relief

bend protective boots for secured termination.

Metallic high strength with rear cable manager. UL

94V0 rated material.

42 (Panduit/Corning/Commscope) No 13 5,500.00 71,500.00

SITC of 6-core Outside Plant Cable - Corrugated

Steel tape Armored, 2.0mm HDPE Sheath, Loose-

tube, Gel-filled, 9/125 SM, OS2 with attenuation

and 0.31dB/Km @1386nm, confirming to

Telcordia GR-20-CORE. Shall have peripheral

glass yarns strength member with max crush

resistance upto 3000N

43 (Panduit/Corning/Commscope) Mtr. 1000 55.00 55,000.00

SITC of 12-fiber SC-Style, Singlemode , 19-inch,

1U Rack mount Patch Panel pre loaded and factory

assembled with SC SM adapter, 24 SC SM OS2

Pigtails, Splice tray, management rings & Splice

protectors. Shall have min depth of 320mm and

pre-fitted with grounding lugs for installing

metallic armored cables.

44 (Panduit/Corning/Commscope) Nos. 4 13,500.00 54,000.00

SITC of SC-LC Style Singlemode OS2 Duplex

Bend Insensitive Patch Cord, LSZH Sheath

conforming to flame test IEC 60332-3, IEC 60754-

2, IEC 61034-2, UL 1685, 3 Meter, fiber

confirming to G.652.D, G.657.A1. End face shall

of UPC polish, Return loss min 50dB.

45 (Panduit/Corning/Commscope) Nos 12 1,500.00 18,000.00

46 Supply & Installation of SFP Module make Cisco Nos. 10 12,000.00 120,000.00

Supply and Installation of 12U Wall Mount rack

including 1no 6skt PDU, 1no 90CFM FAN, 1no

Cable Manager. (Make-VALRACK,

47 VEROPRESIDENT, Netrack) No 3 8,500.00 25,500.00

Supply and Installation of 42U Wall Mount rack

including 1no 6skt PDU, 1no 90CFM FAN, 1no

Cable Manager. (Make-VALRACK,

48 VEROPRESIDENT, Netrack) No 1 58,000.00 58,000.00

Supply & Installation of 24 Port 10/100/1000Mbps

L2 Managed Switch with 4 SFP Ports. Make:

49 Cisco/Juniper/HP Nos 10 75,000.00 750,000.00

Qnty. Shedule Qnty. Non- Rate For Non- OSR Non-Shedule Item

SL.No. Description of Item Unit Item Shedule Item Rate For OSR Shedule Item Amount in Rs. Amount in Rs.

SITC of 4 pair U/UTP CAT 6 23 AWG cable ETL

verified to ANSI/TIA 568.2-D and ISO/IEC

11801, Shall meet IEEE 802.3bt (type 4) for

4PPoE transmission, Certified by independent test

lab i.e ETL / Intertek for 4 connector channel

performance tested upto 600Mhz, LSZH sheath as

per IEC 60332-3, max DC resistance 7.61

Ohm/100m to be installed in the existing surface/

recessed steel/ PVC conduit/raceway as required

50 (Panduit/Corning/Commscope) Box 10 8,500.00 85,000.00

Supply & Installation of Pure IP PBX System

Model - ETERNITY GENX 12SAC 200

subscribers 200Analog lines , 64 party video

conference , voip channel 64, PRI/ISDN channels -

4, IP subscribers 999, analog line expandable upto-

240, arm processor. Make -

51 matrix/accord/asttecs/syntel Nos 1 425,000.00 425,000.00

Supply & Installation of IP based PoE Phone with

single lie Display

with 2 Ethernet Port.

52 Make: Matrix/Panasonic/Asttecs Nos 30 4,000.00 120,000.00

SITC of 19", 1U height Category 6 U/UTP Loaded

Patch Panel, 24 port, UL listed. The information

Outlets shall be individually replaceable from the

panel ports. each port should have strain relief

bend protective boots for secured termination.

Metallic high strength with rear cable manager. UL

94V0 rated material.

53 (Panduit/Corning/Commscope) Nos 2 5,500.00 11,000.00

Supply & Laying of 2pair Telephone Cable make

54 Finolex/ Polycabs/Havells Mtr. 12000 30.00 360,000.00

Supply & Installation of 24 Port 10/100/100mbps

L2 Managed PoE Switch having PoE Power

Budget upto 280W with 4 Gigabite SFP Ports.

55 Make: Cisco/Juniper/HP Nos 2 70,000.00 140,000.00

Supply & Installation of Color ID Telephone set

56 make Panasonic /Beetel/BPL Nos 150 1,500.00 225,000.00

Supply, delivery, installation, testing &

commissioning of indoor wall mounted type

100pair telephone distribution box having

following number of junctions made out of 1.6mm

thick CR sheet steel duly primered & painted with

enamel paint having hinged front door, testing

facility having provision for cable / conduit entry

57 complete as per direction of Engineer-in-charge. Nos 4 7,000.00 28,000.00

Supply, delivery, installation, testing &

commissioning of indoor wall mounted type

200pair telephone distribution box having

following number of junctions made out of 1.6mm

thick CR sheet steel duly primered & painted with

enamel paint having hinged front door, testing

facility having provision for cable / conduit entry

58 complete as per direction of Engineer-in-charge. Nos 1 12,000.00 12,000.00

Supply and laying of 2RX 0.5 sqmm 50 pair

Telephone Riser pvc Cable.(Un armoured)(Floor

SITC of dual port, 3X3 , 86x86 mm Square

faceplate with dust cover, snap in frame, white for

I/O fixing at user side with wall mount box for

Data and Voice and Cat 6 I/O UTP SL series

Jackwith Strain relief and bend limiting boot,

Exceed TIA/EIA-568-C.2 and ISO/IEC 11801

standards for Category 6/Class E component

performance. (complete set)

60 Panduit/Corning/Commscope Nos 30 515.00 15,450.00

Supply & Installation of RJ-11 Information Outlet

Supply, delivery, installation & testing of TV outlet

boards containing a clip-in type modular TV

Socket outlet fixed on metallic concealed box

including connections and making good the

damages caused complete as required and as per

62 direction of Engineer-in-charge. Each 68 443.00 30,124.00

Wiring to TV Antenna Socket outlet from junction

box with Coaxial copper conductor TV antenna

cable run inside prelaid conduit complete including

termination, testing etc complete as required and

63 as per direction of Engineer-in-charge. Mtr 2568 96.00 246,528.00

Supply, delivery and laying of following sizes of

2mm thick PVC Conduit concealed in wall/

column/ roof slab of the building alongwith other

accessories and 18 swg GI wire complete for

Electrical Wiring/Telephone / TV & Data cable

wiring as required and as per direction of Engineer-

J. Miscllaneous Items

Qnty. Shedule Qnty. Non- Rate For Non- OSR Non-Shedule Item

SL.No. Description of Item Unit Item Shedule Item Rate For OSR Shedule Item Amount in Rs. Amount in Rs.

Supplying and fixing 3 nos GI fire bucket of 9 ltr

capacity with suitable pedastal arrangement for sub-

65 station yard etc as reqd. Set 1 5,600.00 5,600.00

66 Supplying 11 kV hand gloves as reqd. Set 1 1,150.00 1,150.00

Supplying and Laying Rubber mat 1M X 2M X

2.0MM thick to withstand 1.1 KV dielectric

strength, Electrical Safety/Shock Chart & SLD etc

Supplying & fixing Route Markers for LT UG

Providing and fixing LT danger notice plate of 200

mm X 150 mm, made of mild steel, at least 2 mm

thick, and vitreous enameled white on both sides,

and with inscription in single red colour on front

69 side as required. Each 2 187.00 374.00

Supplying of First aid box as approved by St.John

Ambulance Brigade/Indian Red Cross Society and

70 confirming to IS 2217/ 1963. Each 4 410.00 1,640.00

S/F of Shock Treatment chart duly glazed mounted

71 on Aluminum Frame with sheet glass as required. Each 8 510.00 4,080.00

Providing & fixing of M.S. angle iron with fixing

materials and painting for cable racks in trenches/

72 on walls etc .as required. Kg 200 80.00 16,000.00

S/F of Shock treatment/ restoration charts written

in Hindi/ local lenguage and English duly framed

73 and covered with 3.0 mm glass as required. Each 8 350.00 2,800.00

Supplying of Caution Boards manufactured out of

16 SWG, MS sheet of 450mmx 300mm size duly

painted white and having `MAN ON LINE' and

'DO NOT SWITCH ON' written in Red complete

with hanging arrangement as required and &

74 approved by the Engineer Incharge. Each 1 140.00 140.00

Supply,installation,testing & commissioning of

poly crystalline solar pv panel of 10KWp

(Make:Waaree / Vikram /Tata-BP) along with

inverter of suitable capacity (Make: Delta/

Schneider (APC)/ ABB) and meeting following

condition/requirement. The efficiency of the panel

1 shall not be less than 16%.

a)Minimum capacity of solar panel shall be 250Wp

b)The solar panel frame shall made of aluminium

c)The support shall be made of GI

d)The top cover of solar panel shall be with 6mm

thick tonghend glass

e)Transformerless inverter with dual MPP trackers

f)Array junction box shall be suitable for PV

array(Make:Hykon/Hensel)

g)Laying of 1.1KV grade XLPE copper conductor

armoured power cable with GI perforated cable

tray suitable for connection from solar pv panel to

inverter (Distance from solar array installation to

inverter may be taken as 20 mtr)

h)One number energy meter installed for showing

all electrical parameter LS 1 1,011,000.00 1,011,000.00

Solar Panel (To be installed inside the

2 Electrical Room at Ground Floor)

Busbar - 100 Amp Al busbar with SC rating of 25

KA suitable for operation at 415 Volt, 50 Hz, 3

One (1) Incomers from Solar Inverter is

One (1) - 63A FP, 25KA,MCCB

One(1) set of – 63/5A , 10VA , CL 1.0, CT

One (1) - 3 Ph Digital Ammeter.

One Set ON/OFF Indicating lamp with control

Eight (8) - Outgoing Feeders

One (1) - 16A DP, 10KA MCB

One (1) - Outgoing Feeder each comprising of

One (1)- 32 Amp FP 10 KA MCB with 32 Amp

TP contactor, over load trip, Programmable timer

for automatic switching ON and OFF of external

lighting, Auto/ Manual selector switch, Auxilliary

Contactor, ON/OFF push button and indication

along with control fuse etc as required.

PANEL AS ABOVE Set 1 48,300.00 48,300.00

C. NURSE CALLING SYSTEM

SITC of Central Display Module -Nurse station

unit Narrating Type of call, Colour Coded Room

nos, Call Forwarding, Call Escalation, SMS facility-

1 up to 16 beds including monitor. Make- Orlia No. 11.000 45800.00 503800.00

Qnty. Shedule Qnty. Non- Rate For Non- OSR Non-Shedule Item

SL.No. Description of Item Unit Item Shedule Item Rate For OSR Shedule Item Amount in Rs. Amount in Rs.

SITC of Central Display Module -Nurse station

unit Narrating Type of call, Colour Coded Room

nos, Call Forwarding, Call Escalation, SMS facility-

2 up to 32 beds including monitor. Make- Orlia No. 1.000 61000.00 61000.00

SITC of Bed Unit with Nurse Call, Code Blue and

Additional Help complete with corded handset,

with CLEAR ( more than One BED) Bedside

Nurse Call Modules-3 Modular Face plate. Make-

SITC of Bathroom (Emergency) Pull Cord

Modules Calling Unit – Shared/single Toilet for

Multiple beds (Toilet Call Modules-3 Modular

4 Face plate) Make- Orlia No. 30.000 4000.00 120000.00

5 SITC of Door/ Bed Indicator (DI/BI) Make- Orlia 14.000 2025.00 28350.00

6 SITC of NCS PoE 08 port Switchers Make- Orlia No. 6.000 12250.00 73500.00

7 SITC of NCS PoE 16 port Switchers. Make- Orlia No. 6.000 20000.00 120000.00

Supply of CAT 6 Cable & pulling the Cable with

8 existing PVC Pipe. Make- D-Link Box 6.000 8600.00 51600.00

Supply of Modular Box with Fixing. Make-

TOTAL 958250.00

D. BUILDING MANAGEMENT SYSTEM

SERVER , WORKSTATION HARDWARE

1 S&I of MAIN BMS DATABASE AND

APPLICATION SERVER HARDWARE

Primary Server - The minimum configuration

shall be Intel® Xeon® X5650 (2.66GHz/6-

core/12MB/95W) Processor 8MB shared L3

cache/8/16GB PC3-10600R-9(RDIMM) System

Interface for Modbus RS485 or M-bus Data

point)- Colour Graphics BMS Software Operating

on Windows platform with data for Integration

captured in an ODBC format preferably Excel

Sheet for Monthly computation of Data and as

required by the End User. (Refer I/O summary):

Software capability to do Graphics, trends,

alarms(Option - SMS and E mail), history etc.

Management module with interface to RFID

scanners shall be available. Hard Disk - RAID

configured 7.2 RPM, 1TB for DB storage Hard

Disk -2 x 180GB SAS 10K Drive (Dual mirrored)

RAID 1 configured drives for OS and Application

Software Integrated Dual Port Gigabit Server

Adapter/HP Smart Array P411/256 BBWC (2) x Nos 1.000 245500.00 245500.00

460W common slot Power Supply SATA DVD

Optical Kit 3 PCI-E x8 Kit and complete as

required and as per specifications with necessary

Rack and Accessories.

2 BMS Client Station

S&I of BMS Client workstation shall comprise

of the following minimum hardware:

Six Core Processor at min. 3.2 GHz ,12M, Intel

HD Graphic 630, 6.4GT/s, 8 GB or more of

RAM, 500GB SSD, 3.0Gb/s Hard Drive for OS

and BMS Applications Network Copper Interface

Card - 10/100/1000MB Video Card – 8 GB Quad Nos 1.000 115500.00 115500.00

Monitor Graphics card

Microsoft® Windows 10 or Higher 64 bit which

offers teaming feature and complatible with BMS

Software. Complete with Anti-Virus, MS

Windows Client Software and operating license;

3 S&I of A 4 size Laserjet colour Printer suitable for

the application, with driver software.

4 SITC of Edge Switch : 8 port layer 2 Industrial

switch with 10/100/1000 non-POE, Managed

Switch with two SFP slots and all related

termination accessories as per site specific system

requirement with 2nos.Shall be with DIN Rail

Mounted 230V Dual AC Input (Primary & Nos 5.000 56000.00 280000.00

Secoundry power Source) Intelligent Power

Supply with output of 48V DC complete with

Enclosure. SFP Modules shall be considered as

5 S&I of Networking Accessories Lot 5.000 131000.00 655000.00

Qnty. Shedule Qnty. Non- Rate For Non- OSR Non-Shedule Item

SL.No. Description of Item Unit Item Shedule Item Rate For OSR Shedule Item Amount in Rs. Amount in Rs.

6 S&I of GUI software for the proposed Building

Management System shall be point license based

having BACnet Advanced Workstation (B-AWS)

certification having BACnet protocol version 13.

The software shall comply to vector graphics. The

software shall support distribution of the system

over multiple servers to cater to future

expandability. The servers shall be able to inter-

connect with each other so that a user can

seamlessly navigate the objects in the system

independently of the server he/she is connected to.

The software shall be capable of integration with Set 1.000 1291000.00 1291000.00

different BACnet data e.g. BACnet over IP or

LON or MSTP vide converters manufactured by

same OEM. The software shall be capable to

support different distributed system configurations

e.g. SEGMENTED, FULLY MESHED and

HIERARCHICAL so that very large systems can

be connected and systems can be easily organized

by location or discipline. The software shall also

support historic database infrastructure to be

configured over multiple on-line store of set of

data slices of congigurable sizes and durations.

This shall allow Storage that can be optimally

tuned for different recording frequencies, Storage

can be segregated by discipline/scope to cover

specific requirements, Seamless access to data:

reporting, advanced reporting and log viewer

searches work across storages, Data archiving

supported, provides a less expensive solution when

long term on-line data availability is not required.

should include 10000 IO points (Including Hard &

Soft Points) as per IO summary.

-With 2 simultaneous client Station Lisences.

-SMS & E-mail Alarm Notification Module , SMS

Paging & Email Facility for transmitting specified

alarms to designated personnel.

-Shall be Complete with Web Browser Module

for Remote Login, to be able to transmit user

defined data in Graphical Format. The Client

should be capable to interface seamlessly with both

the Application Servers and there should not be

any loss of processing / visualisation, even if one of

the Application Server Hardware Fails.

7 S&I of Third Party Integration:The Protocol

Integrator/ Convertor shall be Capable to Integrate

Open protocol systems on BACnet

/Modbus/LONWORKS/M-Bus/J-Bus Protocol

Made avaliable on IP, or on serial RS 485 / 232

interface.( Separate Integrator for each

system)inetration licenses and interface port for

following third party systems.

a Integrator for VRF Units Set 1.000 301125.00 301125.00

b Integrator for Lifts Set 1.000 17125.00 17125.00

c Integrator for Un-Interupted Power Supply System Set

d Integrator for SMPS /Battery Set 1.000 17125.00 17125.00

e Integrator for Breakers Set 1.000 60125.00 60125.00

f Integrator for Diesel Generator (DG) System Set 1.000 30825.00 30825.00

g Fire Alarm System Integration Set 1.000 97125.00 97125.00

h Integrator for Energy meters Set 1.000 107125.00 107125.00

8 Direct Digital Controllers: BACnet/IP

S&I of Networkable 32 Bit DDC Controllers with

I/O points as per enclosed IO List, inbuilt real time

clock, Battery backup. The controllers shall be

capable of standalone operation with real time

clock and historical database. The DDC's shall be

capable of peer to peer communication without

help of system interface controller or PC. The

DDCs shall be with suitable IP 54 enclosure

complete with all wiring and accessories . BTL

a Underground Fire Tanks Lot 1.000 155000.00 155000.00

b Raw Water Tanks Lot 1.000 26800.00 26800.00

c Flushing Water Tanks Set 1.000 26800.00 26800.00

d Soft Water Tanks Set 1.000 26800.00 26800.00

e RO Water Tanks Set 1.000 26800.00 26800.00

f Overhead Fire Water Tanks Set 1.000 26800.00 26800.00

g Overhead Domestic Water Tanks Set 1.000 26800.00 26800.00

h Number of Sumps Set 1.000 26800.00 26800.00

j Electrical Pump System Set 2.000 26800.00 53600.00

k Diesel Operated Pump System Set 1.000 26800.00 26800.00

l Jockey Pump System Set 2.000 26800.00 53600.00

m Booster Pump System Set 1.000 26800.00 26800.00

n Electrical Panels Set 1.000 121800.00 121800.00

o Number of Toilet Exhaust Fans Set 360.000 2200.00 792000.00

p Number of Smoke Extraction fans Set 48.000 5600.00 268800.00

q Number of Kitchen Exhaust fans Set 40.000 5600.00 224000.00

r Number of Liftwell Pressurization fans Set 6.000 5600.00 33600.00

s Number of Staircase Pressurization fans Set 12.000 5600.00 67200.00

Qnty. Shedule Qnty. Non- Rate For Non- OSR Non-Shedule Item

SL.No. Description of Item Unit Item Shedule Item Rate For OSR Shedule Item Amount in Rs. Amount in Rs.

9 S&I of Portable Operator Terminal (POT)/

terminal server capable to be hooked to any

Automation level controller to monitor and change

set points of any parameter and communicate to Nos 1.000 92125.00 92125.00

any controller in the network. The Terminal should

be capable of viewing / changing parameters and

trend the specified parameters as per requirement

10 SITC of Field Sensors

a Outside Air Temperature & RH monitoring Nos. 1.000 19750.00 19750.00

b Hydroge Sensor Nos. 1.000 23750.00 23750.00

c Air quality sensors/Co2 sensor Nos. 40.000 13250.00 530000.00

d Wall/Ceiling mount Temerature and RH sensor Nos. 24.000 10750.00 258000.00

e Wall mount Temerature sensor Nos. 24.000 1850.00 44400.00

f Flame proof Level Switch For Disel Tank Nos. 2.000 6250.00 12500.00

11 Cable and Conduit

SLTC of Cabling for instrument, controls, valves

to DDCs and communication cabling from DDC to

central equipment complete with earthing,

supports etc complete. Laid on Surface / On Cable

Trays. All Cables shall be ferruled and tagged, and

shall use lugs for termination at both ends.

a Supplying & Installation of signal FRLSH cables 4

core 1.0 Sq.mm Armoured Shielded Cable

b Supplying & Installation of signal FRLSH cables 2

core 1.0 Sq.mm Armoured Shielded Cable

c Supplying, laying, termination, testing and

commissioning of Cat 5/Cat 6 Unarmoured cable Mtrs 2000.000 59.00 118000.00

for bus connection- for Integration / controllers

d PVC 25mm FRLSH conduit Mtrs 2000.000 70.00 140000.00

S/F of Pre-Galvanised Perforated G.I Cable Trays

without cover with all required fixing & mounting

accessories of the following sizes

13 EQUIPMENT RACK

S/F of 19" type Equipment racks for mounting the

Servers/ Switches in the BMS Equipment Room,

& for mounting field mounted Switches at every

Floor.Racks shall be complete with Modular Patch

Panels for Patching the Field Cables.

ABSTRACT ESTIMATE OF FIRE FIGHTING, FIRE ALARM & PUBLIC ADDRESSING SYSTEM FOR UP GRADATION OF DISTRICT

HEADQUARTER HOSPITAL WITH 100 BEDS, ICU & TRAUMA CARE FACILITY AT ANGUL DISTRICT, ODISHA.

Qnty. Shedule Qnty. Non- Rate For Non- OSR Non-Shedule Item

SL.No. Description of Item Unit Item Shedule Item Rate For OSR Shedule Item Amount in Rs. Amount in Rs.

A. FIRE FIGHTING, FIRE ALARM & PUBLIC ADDRESSING SYSTEM

PART - I : FIRE FIGHTING PUMPS, PIPING,

VALVE & ACCESSORIES :

Electric Motor Driven Hydrant Pump Location -

Supplying, installing, testing and commissioning of

Fire authority approved Electrical driven fire pump

suitable for automatic/ manual operation consisting

of the following:

i) Horizontal split casing, high pressure, single/

multistage centrifugal type fire pump having cast

iron body, bronze impeller,stainless steel shaft &

capable of delivering 2280 LPM against a total

head of 56 M while running at 2955 RPM

complete with proper connection to suction and

delivery line, and including bypass arrangement for

testing of pumps as per the requirement. Suitable

mechanical seal with mounting aggangement shall

be included, having a name plate indicating

suction, delivery, head, discharge, stages, RPM

and direction of rotation.

Pump shall be capable of furnishing not less than

150% of rated capacity at a head not less than 65%