M/o Various colonies under Nazul A/c-II Dwarka Zone.

Amount

Providing and placing executive high back revolving chair . Seat plywood made of 12+6mm hot pressed. Upholstery prime quality leatherite. Seat & back are firmly connected to the base frame machanism. Machanism provided upright position locking. Tilt adjustment can be operated in seating position. Chair max height 1140mm. 470W x 480D base seat 50mm thick with HD foam & 475W x 700H back seat 50mm thick moulded with HD foam. Armrest fitted to the seat with armrest connecting brackets. Armrest made of PU. Seating height can be adjusted with a Pneumatic gas lift. Understructure used in nylon base with 3 pieces bellow. Casters made of moulded black nylon metal bolt inserted & fitted with 5 nos. twin wheel casters 50mm Dia.

Providing and placing reloving medium back chair. The mesh back has a central console that provides excellent lower back support for improved ergonomics. The seat cushion is upholstered in soft black fabric rests firmly on a nylon base powered by castors. The front facia of the chair is full of poise with its sturdy arms and detached back. Overall Dimension (W)550mm X (D)450mm X (H)945mm, Back Type: Low Back, Base:Nylon Base. Base Type:Revolving, Maximum Seating Height:20.47", Minimum Seat Height: 16.73", Function:Revolving. Pneumatic Height Lift: Tilt Tension Control::Push [Back, Locking Mechanism:Push Back. The pneumatic height adjustment shall have adjustment stroke of 75mm and shall be operated at 30kgs extension force. The Seat are made up of 12mm th hot pressed plywood upholstered with PVC with polvurethane foam, chair seat has foam of density 30-35 kg/m3.

Providing and placing executive low back revolving chair. Executive chair with manual cylinders and polyurethane arms. Fabrication : The base of the chair carries five pronged structure made of 3mm thick CRCA steel sheet and joined to 2" round pipe having 3mm thick walls to resist weight upto 150 Kgs. Base joined to seat with 5mm thick sheet strip of various sizes to provide extra strength and support duly anti rust treated and powder coated not less than 30 microns. The seat and the back contains flatted springs covered with ½" thick colour which is then covered with 2" rubber foam of ISI mark and later with 12mm thick PU foam. This is finally neatly upholstered with specially developed fabric from our fabric collections.

Providing and placing executive fixed base visitor chair ergonomically designed visitor chair with special contour on the back rest for human body with lumbar support which protects the spine and leaves the shoulder free for easy movement. Base of the chair made of ERW MS Pipe frame not less than 16 gauge duly powder coated up to 40-45 microns. Seat and back made of 12 mm moulded ply. Molded PU foam of density not less than 50 kg/m3. Armrest is made of one piece well rounded polypropylene.

Providing and placing back low back chair of overall size 512W x 500D x 800H. Seat plywood made of 15mm hot pressed. Upholstery with prime quality high fabric / letherite. Chair max height 800mm. 425W x 400D base seat 30mm thick HD (High Density) foam & 435W x 250H back seat with 15mm ply with letherite/ fabric. 450mm handle in / 512 handle out arm rest fixed type chrome finish. Arm rest height from seat 190mm height from seat to ground 425mm. understructure made of ms oval pipe 16 gauge (15x30 chrome).

Providing and placing steel almirah of size 1270x750x430mm (hxwxd) having 3 adjustable shelves making 4 compartments without locker Fabrication : Almirah’s side, back, top, bottom & shelves are made from mild steel sheet not less than 22 gauge and without ant burrs & dents. The shelves shall have lipped flange 25mm width 15mm in depth. It is havind three way locking system to be provided with good quality lock with handles. The shelves are fitted to rack strips made of mild steel sheets of 20 gauge thick with help of 4 brackets of 16 gauge that for support and adjustment and are having load bearing capacity of 60kg. uniformity divided load per shelf. The doors are made of mild steel sheet not less than 20 gauge and are having metal stiffener suitably spot welded to stiffen the door and fitted with the body with the help of but type hinges made of mild steel sheet not less than 18 gauge thickness double folded for free & smooth movement of doors. All the Steel components shall be welded together to form one unit and powder coating of minimum 50 microns dry film thickness in conveyorised powder-coating plant with bakin oven and powder applicators after 8 tank pre treatment process flow using hankel chemical.

Providing and placing steel filing cabinet 3 drawer of overallsize 460W x 620D x 1000H. All drawer body left, right & back made of CRCA metal sheet 0.8mm thick metal sheet powder coated. Filling cabinet top made of CRCA sheet 1mm thick powder coated. Drawer body channel metal sheet 1.5mm thick & drawer body CRCA metal sheet 0.6mm thick metal sheet. Drawer locker provided brass plunger & lever. Filling cabinet finished with approved powder coated shade. All metal pieces shall be welded properly strongly and conformity with regulations. CO2 welding shall be used. All metal shall be coated after being treated with at least three stages and cleaned from oil, grease, dust and other dirt using special thermal control coating for metal furniture to form a layer of base coating of (iron phosphating) (0.4 – 0.8) gm/m². Automatic spray coating shall be applied to be followed by a drying process in a thermal furnace with suitable temperature and time for the process. Metal pipe & 10 tank treatment with minimum 45-50 micron powder coating.

Providing and placing executive table of size 1800x900x750mm (wxdxh) with side unit of size 1050x450x750mm (wxdxh). Top made in 60mm thick of combination of wood veneer , commercial ply board with MDF board in two tones duly polished in melamine finish & deco paint with cable manager on top. Top rest on MS chrome finish studs of dia 50mm of 75mm height . Round shaped legs of 60mm thick. Modesty made in 20mm thick commercial ply board with 4mmm thick teak ply duly polished in melamine finish & deco piant. Modesty panel having groove pattern in between duly deco paint . Main table provision of three drawer of movable pedestal of size 400x450x575mm (wxdxh). Pedestal top, bottom & sides made of 19mm thick of wood veneer finish on MDF board duly polished in melamine finish. Pedestal back & drawers bottoms made of 6mm thick ply duly polished running on good quality of telescopic chanels for smooth running with central locking arrangememts. Side unit having one drawer and one openable shutter on one side made of 19mm of wood veneer finish on MDF board duly polished in melamine finish. And other side having keyboard tray at middle running on good quality of telescopic channels with necessary hardware and fixture.

Providing and placing computer table of size 120x600x750mm (wxdxh). Table top are made of 25mm thick prelaminated particle board the edges shall be sealed with 2mm thick thin strip of impermeable PVC that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree Celsius.Base made in 18mm thick prelaminated particle board the edges shall be sealed with 2mm thick thin strip of impermeable PVC that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree Celsius. It is also having keyboard tray & other side having space for CPU/other accessories.

Providing and placing Executive Table of size 1500x750x750mm (wxdxh). The table top are made of 25mm thick prelaminated particle board the edges shall be sealed with 2mm thick thin strip of impermeable PVC that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree Celsius.Base & modesty made in 18mm thick prelaminated particle board the edges shall be sealed with 2mm thick thin strip of impermeable PVC that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree Celsius. It is having fixed three drawer unit on one side of table & other side having one openable shutter.

Providing and placing steel almirah of size 915x480x1980mm (wxdxh) having 4 adjustable shelves making 5 compartments without locker. Almirah’s side, back, top, bottom & shelves are made from mild steel sheet not less than 22 gauge and without ant burrs & dents. The shelves shall have lipped flange 25mm width 15mm in depth. It is having three way locking system to be provided with good quality lock with handles. The shelves are fitted to rack strips made of mild steel sheets of 20 gauge thick with help of 4 brackets of 16 gauge that for support and adjustment and are having load bearing capacity of 60kg. uniformity divided load per shelf.The doors are made of mild steel sheet not less than 20 gauge and are having metal stiffener suitably spot welded to stiffen the door and fitted with the body with the help of butt type hinges made of mild steel sheet not less than 18 gauge thickness double folded for free & smooth movement of doors.

Providing and placing steel filing cabinet 4 drawer of overallsize 460W x 620D x 1314H. All drawer body left, right & back made of CRCA metal sheet 0.8mm thick metal sheet powder coated. Filling cabinet top made of CRCA sheet 1mm thick powder coated. Drawer body channel metal sheet 1.5mm thick & drawer body CRCA metal sheet 0.6mm thick metal sheet. Drawer locker provided brass plunger & lever. Filling cabinet finished with approved powder coated shade. All metal pieces shall be welded properly strongly and conformity with regulations. CO2 welding shall be used. All metal shall be coated after being treated with at least three stages and cleaned from oil, grease, dust and other dirt using special thermal control coating for metal furniture to form a layer of base coating of (iron phosphating) (0.4 – 0.8) gm/m². Automatic spray coating shall be applied to be followed by a drying process in a thermal furnace with suitable temperature and time for the process. Metal pipe & 10 tank treatment with minimum 45-50 micron powder coating.

Providing and placing Executive Table of size 1500x750x750mm (wxdxh). The table top are made of 25mm thick prelaminated particle board the edges shall be sealed with 2mm thick thin strip of impermeable PVC that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree Celsius.Base & modesty made in 18mm thick prelaminated particle board the edges shall be sealed with 2mm thick thin strip of impermeable PVC that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree Celsius. It is having fixed three drawer unit on one side of table, pullout keyboard tray in middle & other side having one openable shutter.

Delite Hi-Tech Furniture Industries (P) Ltd.