PERIODICAL SERVICES AND REPAIRS TO CHAJJA AND FACIA TO OTM BLDGS AND VARIOUS ASCON NODES AT JALIPA MIL STN UNDER GE A BARMER

Amount

Dismantling loose / disintergrated portion of RCC Chajjas, bend shelves, beams balconies and similar work at any position or any height and doubbing out with PCC 1:1.5:3, 15mm to 50mm thick using 6 to 12mm graded stone aggregate to make up and finished required shape including applying anti corrosive paint on exposed surfaces and provision of necessary supporting form work and including 10mm thick plastering in CM 1:4, finished fair and even, complete all as specified and directed.

M&L for Ready mix plaster in cement mortar ( 1:6) , 15mm thick on other than fair faces of brick work or stone surfaces finished even and smooth without using extra cement including taking down of old plaster of any nature and any thickness complete all as specified and directed.

M&L for Ready mix plaster in cement mortar (1:4) , 15mm thick mixed with water proofing compound,on other than fair faces of brick work or stone surfaces , finished even and smooth without using extra cement including taking down of old plaster of any nature and any thickness complete all as specified and directed. (WPC measured and paid separately)

M & L for Ready mix plaster ,5 mm thick in CM (1:3) on ceiling surfaces finished even and smooth without using extra cement, including taking down of old plaster of any nature and any thickness complete, all as specified and directed.

M&L rendering 15mm thick on stone masonary surfaces in CM 1:6 finished even and smooth with sagol over and including dubbing out average 10mm thick on irregular face of walls in CM 1:6 including taking down of old plaster of any nature and any thickness complete all as specified and directed.

M&L rendering 5mm thick on concrete surfaces in CM 1:3 on ceiling, finished even and smooth with sagol all including taking down of old plaster of any nature and any thickness as specified and directed.

M&L 15mm thick cement plastering on concrete surfaces in CM (1:4) finishing surfaces even and smooth without using extra cement including taking down of old plaster of any nature and any thickness complete all as specified and as directed.

M & L for rough cast plaster over 10mm thick cement plaster in CM 1:4 on stone/ brick masonary wall surfaces complete all as specified and directed.

M&L preparing newly plastered surfaces of wall and applying complete wall with POP/Birla putty and making smooth surfaces and applying two coats of Oil bound distemper over a coat of primer all as specified and directed by Engineer-in-Charge.

M&L for preparation of newly plastered surfaces ceiling and applying complete ceiling with 3mm POP/Birla putty and making smooth surface and applying three coats of white wash over a coat of POP/Birla putty all as specified and directed.

M&L for preparation of new plastered surfaces of external walls/RCC surfaces/soffits of chajjas/roof projection/cantilivers/balcony etc including cornices and applying two coat of cement base paint @ 5sq.m/kg/1 coat over a one coat of of external primer by using following brands of cement base paint complete all as specified & as directed by engr-in-charge. Make of cement paint:- Snowcem Plus (Snowcem paints)

Supply only liquid water proofing compound ( For external plaster surfaces) complete all as specified and directed

M & L for complete removal of existing treatment including removing unnecessary nails including filling of cracka/holes by crack filler and applying two coats of 100 % premium exterior acrylic emulsion paint of required shade,Make Apex Ultima of Asian Paint or long life of berger or Excel Everlast 12 of Nerolac, over a coat of primer and over a 2 coat of wall care putty on wall as well as OVER HEAD WATER TANKS OF ANY CAPACITY OF ANY HEIGHT AND ANY DIA as directed by engr in charge having VOC less then 50gm/litre and UV resisitance as per IS 15489:2004,Alkali & fungal resisitance, dirt resisitance exterior paint of required shade ( Company Depot tinted) with silicon additives @1.00 litre/ 10 sqm, including necessary scaffolding for any height complete all as specified and as directed. NOTE:- 1) Scraping /complete removal will be carried out by mechanical means/grinder including necessary scaffolding. 2) Primer will be applied with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface for painting of subbsequent coats complete all as specified and directed.

All as specified in Item No 14 above except wall care putty but applying two coat of cement base paint @ 5sq.m/kg/1 coat over a coat of primer on wall by using following brands of cement base paint including necessary scaffolding for any height complete all as specified & as directed by engr-in-charge. Make of cement paint:- Snowcem Plus (Snowcem paints) NOTE:- 1) Scraping /complete removal will be carried out by mechanical means/grinder including necessary scaffolding. 2) Primer will be applied with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface for painting of subbsequent coats complete all as specified and directed.

All as specified in Item No 14 but Applying two coat of oil bond distemper over a coat of alkali resistance primer over a coat of wall care putty (to an average thickness of 1mm )thick including necessary scaffolding arrangement for any height as required at site all as specified and directed. NOTE:- 1) Scraping /complete removal will be carried out by mechanical means/grinder including necessary scaffolding. 2) Primer will be applied with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface for painting of subbsequent coats complete all as specified and directed.

M&L for preparing existing treated surfaces of external walls/RCC surfaces/soffits of chajjas/roof projection/cantilivers/balcony etc including cornices and applying one coat of cement base paint @ 5sq.m/kg/1 coat by using following brands of cement base paint complete including necessary scaffolding all as specified & as directed by engr-in-charge. Make of cement paint:- Snowcem Plus (Snowcem paints) Note for above items of external finishing :- the cost for steel tubular double scaffolding necessary for execution of work and protective measures for height more than height of double storey building as directed by engr-in-charge shall be included in the quoted rate against the respective item and nothing shall be admisible for this.

M&L for preparing existing treated surfaces of external walls/RCC surfaces/soffits of chajjas/roof projection/cantilivers/balcony etc including cornices and applying One coats of 100 % premium exterior acrylic emulsion paint of required shade,Make Apex Ultima of Asian Paint or long life of berger or Excel Everlast 12 of Nerolac, over a coat of primer on wall as well as OVER HEAD WATER TANKS OF ANY CAPACITY OF ANY HEIGHT AND ANY DIA as directed by engr in charge having VOC less then 50gm/litre and UV resisitance as per IS 15489:2004,Alkali & fungal resisitance, dirt resisitance exterior paint of required shade ( Company Depot tinted) with silicon additives @1.00 litre/ 10 sqm, including necessary scaffolding for any height complete all as specified and as directed Note for above items of external finishing :- the cost for steel tubular double scaffolding necessary for execution of work and protective measures for height more than height of double storey building as directed by engr-in-charge shall be included in the quoted rate against the respective item and nothing shall be admisible for this.

Writing letters or figures ( Block, Roman, Italic or indian ) not exceeding 30cm high complete all as specified and as directed by engr-in-charge.

Writing stops,commas,short lines, dashes,hyphens, brackets complete all as specified and as directed by engr-in-charge.

M & L for complete removal of existing treatment including removing unnecessary nails including filling of cracka/holes by crack filler and Applying two coats of interior emulsion paint (light shade) @10 sq.m/litre/2 coats by using roller to wall surfaces over & including a coat of interior wall primer @ 10 sq.m/litre/1 coat as recommended for under coat by manufacturer of interior emulsion by using following brands of emulsion and primer over a wall care putty of average thickness 2 to 3 mm over the new plastered/old painted wall after scrapping to prepare the surface even and smooth complete and sanding of the putty surface with mechanical wall sander having mechanical vacuum mechanism with RPM not less than 1500, sanding pad of 240 Grit or above to make the surface free from dust etc complete all as specified and directed. Make of Interior Wall Primer: Asian / Berger / Nerolac Best Quality]. Wall Putty :- (a) Mix the putty powder by adding water as per manufacturer instructions and mix it with putty mixer with the mixing capacity of min 2.5 kg putty per minute. (b) Apply the first coat the prepared mixer with the help of fully automatic airless spray machine of putty application having flow speed of max 6 ltrs per minutes with a maximum pressure 3300 PSI. (c) Allow 6-8 hrs time to dry the putty surface. [ Make of Interior Emulsion : Asian (TRACTOR) / Berger (BISON) / Nerolac (BEAUTY SMOOTH). NOTE:-Primer will be applied with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface for painting of subbsequent coats complete all as specified and directed.

M&L for preparation of old decorated surfaces of walls, stopping nails holes and applying one coat of oil bound distemper including necessary scaffolding arrangement as required at site all as specified and directed.

M & L for preparation of plastered or unplastered old decorated surfaces of walls including brooming down or scraping down with steel wire brushes of smoke spots, moulds, moss effloerent salts and treading oil and greasy spots and applyuing one coat of white (lime) wash complete all as spec ified and directed by Engineer-in-Charge

All as specified in Item No 22 above but applying one coat of white wash on ceiling complete all as specified and directed.

M & L for preparation of old surface of ceiling and applying one coat of oil bound distemper complete all as specified and directed.

M & L for complete removal of existing treatment of any description, Cleaning the wall surface, Removing any dust, Dirt or loose debris with a damp cloth then repair imperfection i.e addressing any cracks, holes, or uneven areas with patching compound and sand smooth. After that applying a two coats of texture paint over a base coat/primer over 2 coats of wall care putty as per manufactures instruction by using roller/ brush/ sponge/trowels/ specializes tools and finally apply a top coat all as specified and directed by Engr-in-charge. Note :- Shade/pattern will be decided by Engr-in-charge.the cost for steel tubular double scaffolding necessary for execution of work and protective measures for height more than height of double storey building as directed by engr-in-charge shall be included in the quoted rate against the respective item and nothing shall be admisible for this.

M&L for preparation of old painted surfaces of wood of any description not other wise described; over 10 Cm width or girth and applying one coat of synthetic enamel paint all as specified and directed.

M &L for preparation of old painted surfaces of steel of any description and in any position over 10 CM width or girth; not otherwise described, and applying one coat of synthetic enamel paint , complete including necessary scaffolding arrangement as required at site all as specified and directed

M &L for preparation of old painted surfaces of steel of any description and in any position not exc 10 CM width or girth; not otherwise described, and applying two coat of synthetic enamel paint , complete including necessary scaffolding arrangement as required at site all as specified and directed

M & L for cutting and widening existing cracks not exc 1cm in girth to 'V' section in existing walls, Cleaning out, wetting,filling with crack filler and apply a coat of sure seal (Dr Fixit) as per manufactures instruction complete all as specified and directed.

M &L for preparation of old painted surfaces of bricks,concrete,asbestos,cement plaster surfaces of any description and in any position over 10 CM width or girth; not otherwise described, and applying one coat of synthetic enamel paint , complete including necessary scaffolding arrangement as required at site all as specified and directed

Devi Engineeing (BID ID -3409501)

m/s sai construction company,bijarar (BID ID -3401542)

DEVARAM CONSTRUCTION COMPANY (BID ID -3401198)

ASHAPURA ENTERPRISES (BID ID -3401592)

S.K. INFRASTRUCTURE (BID ID -3409606)