8646 PROVISION OF CERTAIN REVENUE AND MINOR WORKS UNDER GE (CENTRAL) PUNE

Amount

Surface excavation n exc 30cm deep and averaging 15cm deep and getting out any type of soil complete all as specified & directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out any type of soil complete all as specified & directed.

M&L for cement concrete type D2 1:4:8 (using 40mm graded stone aggregates) as in foundations, filling and mass-concrete complete all as specified & directed.

M&L for pre-cast cement concrete block masonry with solid blocks, Type D-5, 1:5:8, exc. 10 cm in width and setting in mortar, complete all as specified & directed., built in cement mortar (1:6) complete all as specified & directed.

M&L for precast cement concrete block masonry nexc 10cm in width with solid blocks of PCC (1:3:6) gde C-1 and setting in CM 1:6 complete all as specified & directed.

S&F joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated), Fe 410 -W (Gde- E- 250) quality- A complete all as specified & directed.

S&F roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. Fe 410 -W (Gde-E-250) quality- A complete all as specified & directed.

S&F pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified & directed.

S&F pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified & directed.

M&L for hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified & directed.

M&L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering & Ramming complete all as specified & directed.

M&L for cement concrete type D2, 1:4:8 with using 40mm graded aggregate in sub base of 75 mm thick complete all as specified & directed.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in CM (1:4), the surface even and smooth without extra cement complete all as specified & directed.

M&L for rendering 15mm thick plaster on fair faces of brick work or concrete surfaces of walls (1:6) finished the surface even and smooth without extra cement complete all as specified & directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of oil bond distemper over one or two coats of putty including one coat of primer complete all as specified & directed.

M&L for finishing walls with acrylic smooth exterior paint of required hade : new work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified & directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing complete all as specified & directed.

S&F factory made solid panel door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel heaving a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing complete all as specified & directed.

S&F powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified & directed.

S&F mild steel framed work such as grills, framed guard bars etc and similar work confirming to Fe-290, grade E-165 complete all as specified & directed.

S&F 100 mm long mild steel but hinges medium weight colld rolld complete all as specified & directed.

S&F 150 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified & directed.

Supply and fix 150mm long extruded aluminium alloy handles, 150mm long fabricated type, anodised complete all as specified & directed.

S&F 300 mm long aluminium alloy anodised sliding door bolt with hasp staple (bolt type ) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast alu allow complete all as specified & directed.

S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified & directed.

M&L for colored joint free non skid ceramic tiles or matt finish tiles of 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or colored cement to match, including 15 mm thick screed bed or bedded layer in cement mortar 1:6 for laying floor finish complete all as specified & directed.

M&L for glazed ceramic coloured, designer & pattern (dark & light shade combination) tiles in 450 x 300 x 7-8 mm thick on vertical surfaces such as dado etc set and jointed in neat cement slurry and pointed in white or colour cement to match over with and including 10mm thick backing coat in CM 1:4 and filleting complete all as specified & directed.

M&L for telephonic black 18mm to 20mm thick Granite work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platfoms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified & directed.

M&L for machine cut cudappah stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab ncluding rubbing and polishing complete all as specified & directed.

M&L for rounding to edges of stone slabs one edge, such as in steps, cooking platform and other similar situations complete all as specified & directed.

S&F vitreous china wash down water closet pan (pedestal pattern), white with P or S trap with and including plastic water closet seat cover, jet spray, connection to trap, flushing pipe & anti -syphonage pipe and 10 litrs flush tank etc including necessary materials for fittings & making good to floor complete all as specified & directed.

S&F oval shaped vitreous china, WHB, snow white, fancy type of overall size 560 x 470 mm fixed in repairs including 15 mm pillar cock cast copper alloy CP, CP fancy type 15mm bore cast copper stop valve/ange cock, 32 mm brass CP waste fitting & waste pipe & 15 mm PVC connection pipe 450 mm long complete all as specified & directed.

Supply and fix in repairs vitreous china bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) fixed complete all as specified & directed.

S&F for stop cock / angle cock copper alloy CP screwed down high pressure with crutch or butterfly handle screwed both ends for iron/pipe or for union and fixed 15 mm bore complete all as specified & directed.

S&F 15mm bore, CP, bib taps cast copper alloy with crutch or butterfly handle, chromium plated fancy type screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified & directed.

Supply and fix bib taps two way type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule 15 mm bore and fixed and CP Health faucet spray with 1.5m long pipe with wall hook complete all as specified & directed.

Supply and fix swan neck, 15mm bore piller taps of cast copper with capstan head CP screwed down high pressure with or withoutlettered hot and cold with long screwed shank and fly nut for iron pipe and fixed complete all as specified & directed.

S&F PVC connections 15 mm size with PTMT nuts to length 450 mm complete all as specified & directed.

S&F Brass, chromium plated, tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified & directed.

Supplying and laying 15mm bore of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including all required fittings complete all as specified & directed. all as specified incl cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth on brick/stone masonary surfaces complete all as specified & directed.

S&F 20mm dia, UPVC pipes of pressure rating 10 kgf/cm2 fixed to walls, ceilings or in floors etc, any type of pipe complete all as specified & directed.

Supply and fix PVC (SWR) floor trap/nahani trap, plain with grating including jointing with solvent cement 75 mm dia outlet complete all as specified & directed.

S&F rotational moulded polyethelene water storage tanks (cylindrical, vertical with closed top) hoisted & fixed in position all as specified in SSR Pt-I, 1000 litre capacity complete all as specified & directed.

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls 110 mm dia including holding brackets etc complete all as specified & directed.

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls 75 mm dia including holding brackets etc complete all as specified & directed.

S&F PVC(SWR) bends with access door of 75 mm dia, any radius complete all as specified & directed.

S&F PVC SWR PVC (SWR) junction single, (Single T) equal or unequal 110mm dia with door access complete all as specified & directed.

S&F PVC SWR PVC (SWR) junction single, (Single T) equal or unequal 75mm dia with door access complete all as specified & directed.

S&F PVC (SWR) bends of 110 mm dia, any radius complete all as specified & directed.

S&F PVC (SWR) bends of 75mm dia, any radius complete all as specified & directed.

S&F PVC (SWR) vent cowl, 100 mm dia complete all as specified & directed.

M&L for plain cement concrete 1:3:6 Type C2 using 40mm graded aggregate as in foundation, filling in mass concrete for manholes & drains complete all as specified & directed.

M&L for 150mm dia RCC pipes class NP-2 with collars laid in treches with cement joint and tested including cement concrete 1:4:8 type D2 bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested complete all as specified & directed.

M&L for cutting in to existing manhole for connectiing new drain 150/200/300 mm bore, making good to pipe & renderring cutting out existing benching for & forming branch channel in cement concrete ( 1:2:4) type B1 smooth finished & reforming benching as requierd complete all as specified & directed.

Demolition of cement concrete is reinforced of any description and in any position not otherwise specifically provided for complete all as specified & directed.

S&F posts and struts in fencing including cutting tops to shape as directed., drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified & directed.

S&F ornamental and intricate design framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; and similar work con-forming to Fe 290.Gde-E-165 complete all as specified & directed.

S&F 6.00mm thick, fibre glass reinforced translucent plain sheeting with 100mm wide side lap fixed with coach screw and washer in roof, wall etc complete all as specified & directed.

M&L for nominal Mix RCC, type Type B1 1:2:4 (20 mm graded stone aggregate) in Beams, cantilevers, lintels, columns pillars, piers, posts, struts, chullah hoods, stair case, arches, domes, vaults, shell roofs, arch ribs, folded plates, slabs, balconies, canopies, deck slabs etc. or in similar articles complete all as specified & directed.

M&L for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. complete all as specified & directed.

M&L for TMT bar 10mm dia and over cut to length bent to shape reqd incl cranking bending etc complete all as specified & directed. & binding with MS wire (annealed) not less than 0.9mm dia in reinforcement complete all as specified & directed.

All as per srl item No 63 above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified & directed.

M&L for preparing newly plastered surfaces of walls and applying two coats of cement base paint over a coat of white wash complete all as specified & directed.

M&L for preparation of new or previously untreated steel surfaces of any description, not otherwise described, over 10 cm in width or girth and applying two coat of synthetic enamel paint over one coat of red oxide or zink chrome primer on new steel surfaces complete all as specified & directed.

M&L for preparing old plastered surfaces of walls and applying two coats of cement base paint over a coat of white wash complete all as specified & directed.

Site clearance including removing grass, bushes etc in any type of soil complete all as specified & directed.

Earthwork in excavation by mechanical means (hydraulic excavator)/ in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) in all kinds of soil, including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil within a lead of 50 m, complete all as specified & directed.

Earthwork in excavation by mechanical means (hydraulic excavator)/ in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) in ordinary rock, including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil within a lead of 50 m, complete all as specified & directed.

All as per srl item no 70 above but depth exc 1.50m but n.exc 3.00m complete all as specified & directed.

S&F, Vee Wire Filter Screen Kit of SS 304/316 /316L or LCG of Make Apollo Screen or equivalent with the following specification:- (a) Vee wire screen filter kit : Make - Apollo Screen Size 6'x12'x1.0 mtr MOC of screen - SS304 MOC of End connection- MS Slot Size 0.50mm/ 0.75mm Screen length 1.0 mtr Total Filter lenght with end connection 1.4 mtr (b) Including all connected accessories and installation complete all as specified & directed.

Supplying and laying of 150 mm dia UPVC Pipes (SCH-40) in trenches complete all as specified & directed.

M&L for providing cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate as in benching, coping etc complete all as specified & directed.

M&L for brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified & directed.

M&L for providig precast cement concrete in cover slabs using RCC 1:2:4 type B1 setting in CM 1:4 complete all as specified & directed.

Boring holes of 200 mm dia and 2 m deep in soil for inserting pipe and getting out and disposal of spoil to a distance of n exc. 50 m complete all as specified & directed.

Add to item above for each metre depth.

S&F 150mm dia perforated UPVC Pipes (SCH-40) laid and jointed upto sb soil water levelor as directed. by engr-in-charge, including inverted earthen pots with holes in trenches complete all as specified & directed.

M&L for removing excavated material (soil) to a distance exc 50m but n exc 250 and depositing where directed. at a level n exc. 1.5 m above the starting point complete all as specified & directed.

M&L for removing excavated material (soil) to a distance exc 250m but not exc 500m and depositing where directed. at a level n exc. 1.5 m above the starting point complete all as specified & directed.

M&L for RCC pipes class NP-3 with socketed ends laid and jointed complete all as specified & directed. with rubber ring joints of 300mm dia complete all as specified & directed.

M&L for PCC 1:3:6 type C2 using 40mm graded agg as in bed to drain pipes including forming cradles for 300mm pipe complete all as specified & directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers n.exc 25cm in soil complete all as specified & directed.

M&L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for fair finished surfaces complete all as specified & directed.

M&L for formwork to sides of pillars, posts, struts, piers, columns and stanchions for fair finished surfaces complete all as specified & directed.

M&L for formwork to formwork to chullah hoods, chajjas, troughs and similar items including edges complete all as specified & directed.

M&L for reinforced cement concrete design mix M- 25 grade as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc. basement slabs, under-reamed piles and mass concrete complete all as specified & directed.

M&L for reinforced cement concrete design mix M- 25 grade as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified & directed.

M&L for reinforced cement concrete design mix M- 25 grade as in Columns, pillars, piers, posts and struts complete all as specified & directed.

M&L for reinforced cement concrete design mix M- 25 grade as in Chajjas complete all as specified & directed.

M&L for rendering 5 mm thick plaster on ceiling concrete surfaces as in CM (1:3) finished even & smooth without using extra cement complete all as specified & directed.

M&L for three coat of white wash to newly plastered surfaces of on ceiling complete all as specified & directed.

S&F powder coated anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws including locking arragement etc. complete all as specified & directed.

S&F powder coated anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified & directed.

S&F door closer (aluminium extuded body section) hydreulically regulated, , designation No 1 universal type, suitable for door shutters up to 700mm in width and of wieght not more than 35Kg complete all as specified & directed.

S&F mild steel 4 lever mortice lock, vertical type of size 100mm complete all as specified & directed.

M&L for 10mm thick plaster on roof for laying in CM 1:3 water proofing treatment, with using WPC complete all as specified & directed.

Supply only integral water proofing compound.

M&L for APP based polymeric 3mm thick (minimum), weighing not less than 3.6 Kg/ Sqm prefabricated fire layer water proofing membrane reinforced with polyester non woven fabric (weighing not less than 160 gms/sqm) shall be applied over compatible primer at 0.70 Litre/Sqm of density at 25degre Centigrade 0.87-0.89 Kg/Litre and viscosity 70-160cps or cold sticker, application of APP modified membrane shall be by torch application all as specified and as directed., Three course roof treatment consist of as under :- (i) Applying one coat of bituminous primer conforming to IS-3384 @0.70 Ltr per sqm, (ii) laying of APP based membrane as specified thickness and weight (iii) Applying provide two coats of Bitumastic- aluminum paint

M&L for 75mm thick PCC (1:3:6) type B2 (using 20mm graded aggregate) as in plinth protection/hard standing, finishing cement concrete surface even and smooth without using extra cement complete all as specified & directed.

M&L for precast coloured, chequered cement concrete tiles, glossy finish of size 300 x 300mm x 20mm thick, conforming to IS-1237 (2006) set jointed and pointed in neat cement slurry in floor laid over and including 20mm thick screed bed in CM (1:6) complete all as specified & directed.

M&L for earthwork in excavation by mechanical means (hydraulic excavator)/ in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed., within a lead of 50 m complete all as specified & directed.

M&L for rendering 10 mm thick in cement and sand mortar 1:4 on fair faces of brick work or cement concrete surfaces including finishing the surface even and smooth without using extra cement complete all as specified & directed.

M&L for cement concrete 1:3:6 type C-1 using 20mm graded stone aggregate as in bed blocks, coping, benching, bed block for rungs, window cills etc including necessary form work and complete all as specified & directed.

M&L for extra forming fair finished drain or channel 30cm inner girth in cement concrete using extra cement including forms moulds mitred/stopped ends etc complete all as specified & directed.

Supplying, laying and testing complete all as specified & directed. GI tube medium grade 20 mm bore with all fittings laid in trenches complete all as specified & directed.

Supply and fixing of gate valve 20 mm bore complete all as specified & directed.

M&L for cutting/making hole into CI/DI/MS/GI pipes of size upto 100 mm carefully and insertion of new tee incl clamping with suitable size clamp for taking small branch connection upto 25 mm bore complete all as specified & directed.

M&L for concealed point wiring on wall/ceiling with necessary fixing arrangements with PVC-FRLS-H insulated and unsheathed copper multi-stranded conductor of size 1.5 Sqmm, 1100 volts grade drawn in and including rigid non metallic PVC conduit medium grade ISI marked not less than 20 mm dia including all accessories/fittings such as junction boxes, bends, tee, elbow etc alongwith required size Modular boxes including modular frame/cover plate suitable for mounting switches/sockets etc including PVC-FRLS -H insulated and unsheathed copper multi-stranded conductor of size 1.5 Sqmm, 1100 volts grade for continuous earthing complete all as specified and directed. and directed for the following:- (a) One light/Exhaust Fan/ceiling fan & One Bell/buzzer point controlled by one switch.

(b) One switch socket outlet point 3 pin 5 Amps on Independent board.

All as per srl item no.111 above but with 2.5 Sq.mm(Nominal area), single core, PVC insulated and unsheathed stranded FRLS cable 1100 volts grade, marked, including PVC insulated stranded copper conductor 2.5 Sqmm single core cable as earth and connecting to common earth dolly for one 15 amps socket outlet point on independent board complete all as specified and directed.

Supply and fixing of LED 18/20 Watt light fitting Baton integrated LED channel, integral sleek extruded polycarbonate LED Channel with white acrylic cover and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete with all accessories complete all as specified and directed.

S&F LED light fitting surface and wall mounted LED batten with polycarbonate housing & integrated electronic driver complete in all respect of 10W capacity complete all as specified and directed.

Supply and fixing of building security LED fitting upto 40 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete along with suitable size/bore GI pipe bracked duly cut to size and bent to shape , duly painted incl necessary clamps as required to fix on concrete/steel poles incl taking old unsve light & GI bracket any type and size complete all as specified and directed.

S&F ceiling rose ceiling rose, 3 phase/PVC/polycarbonate, isolated body complete all as specified and directed.

S&F modular switch 6A SP one - way 230V white ivory finish complete all as specified and directed.

S&F modular switch 16A SP one - way 230V white ivory finish complete all as specified and directed.

S&F modular socket outlet 2/3 pin 6 amps, multipurpose 2 module 230 Volts, single pole one way suitable for plug tops, complete all as specified and directed.

S&F modular socket outlet 2/3 pin 16 amps, multipurpose 2 module 230 Volts, single pole one way suitable for plug tops, complete all as specified and directed.

Supply & fixing of SPN distribution box, double door in fine powder coated, matt finish with best CRCA sheet, fitted with shrouded neutral, insulated pin type copper bus bar, Din rail, earth bar of 04 way, complete all as specified and directed.

Supply & fixing of MCB SPN, 40 to 63 Amps 240 volts, AC , 10 KA breaking capacity 'C' Series,"ISI marked complete all as specified and directed.

Supply & fixing of MCB SP, 06 to 32 Amps 240 volts, AC , 10 KA breaking capacity 'C' Series,"ISI marked complete all as specified and directed.

Supply and fixing Exhaust fan AC single phase 230 volts for size 300 mm sweep, including making hole and fixing arrangement including nut, bolts, washer etc, making good the disturbed surfaces matched with existing finishes comprising with necessary eletric connection with suitable copper wire from ceiling rose complete all as specified and directed.

M&L for earthing with galvanized steel earth plate electrode 600 x 600 x 6.0 mm thick buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metre below normal ground level connected to galvanized iron wire 4 mm dia (8 SWG) as earthing lead protected by GI pipe medium grade 15 mm bore for protection of GI earth wire and 20 mm dia GI pipe medium grade for watering with alternate layers of charcoal/coke and salt including all accessories like nut, bolts, reducer, nipple, wire meshed/screened funnel and making brick masonry finished chamber of internal size 300 mm x 300 mm x 300 mm with concrete base, covered with PCC cover which shall be embedded in the block masonry including excavation works, refilling, connected to main switch/MCB DB for feeding the electric supply to domestic quarters compete all as specified as shown in electricall plateNo. 3 of SSR Part-I and testing of earth resistance as required. Note : Earthing lead/G.I.Earth wire upto 7.5 metre length shall be deemed to be included in quoted unit rate beyond 7.5 metre, the same shall be measured and paid separately).

Supply, laying, testing and commissionnig of LT cables 1100 volts grade, XLPE insulated, screened and PVC sheathed, galvanised steel strip or wire armoured with multi stranded aluminum conductor, ISI marked, heavy duty including cable glands, cable lugs in LT panel/Bus Bar/DB etc to suit the cable including material and labour for all jointing/connecting material as required size, cables laid in trenches/ducts/under plinth floors passing through pipes etc, fixed on wall 6 sq mm 2 core complete all as specified and directed.

Excavation in trenches, not exc 1.5 mtr wide and not exc 1.5 mtr in depth for laying of LT UG cable in soft/loose and getting out complete all as specified and directed.

Removing excavated material to a distance n.exc 50m and depositing where directed at level not exceeding 1.5m above the starting point omplete all as specified and directed.

M&L GI Tubes, 'light grade', galvanised, with all fittings laid in trenches of size 50 mm dia omplete all as specified and directed.

M&L for fixing of electrical conduit underground HDPE/DWC pipe of size not less than 50 mm dia including all necessary clamping and fixing arrangement complete all as specified and dircted.

Supply and fix fan speed regulator, electronic step type, suitable for single phase AC, 240 volts, 50 Hz, complete all as specified and directed.

Supply and fixing ceiling fan AC single phase 230 volts for size 1200 mm sweep, including fixing arrangement such as nut, bolts, washer etc, making good the disturbed surfaces matched with existing finishes comprising with necessary eletric connection with suitable copper wire from ceiling rose complete all as specified directed.

M&L for cutting of road/hard standing and making good with PCC (1:2:4) type B 1 using 20mm graded stone aggregate complete all as specified and directed.

M&L for fixing of Orange electrical conduit underground HDPE/DWC pipe of size 80 mm dia including all necessary clamping and fixing arrangement complete all as specified and dircted.

Supply, laying, testing and commissionnig of LT cables 1100 volts grade, XLPE insulated, screened and PVC sheathed, galvanised steel strip or wire armoured with multi stranded aluminum conductor, ISI marked, heavy duty including cable glands, cable lugs in LT panel/Bus Bar/DB etc to suit the cable including material and labour for all jointing/connecting material as required size, cables laid in trenches/ducts/under plinth floors passing through pipes etc, fixed on wall 50 sq mm 3.5 core complete all as specified and directed.

Supply , installation, testing and commissioning busbar chamber, outdoor type, double door,KIOSK type of size not less than 0.6x0.0.6x0.25 Mtrs, factory made, front & back openable, properly welded MS angular supported with Stand made out of 50x50x6 mm thick angle iron having 4 Nos legs of 2.5 feet height with CRCA steel sheet not less than 3 mm thick,duly painted internally and externally with two coats of synthetic enamel paint over a coat of red oxide primer of any tint, CPRI Approved with locking arrangements with & including 4 Nos Aluminium busbar of rating 200 Amp on base insulators with MCCB 100 amp 25 kA, 4 Pole with with adjustable thermal setting for incoming with & including necessary platform and grouting of panel as per manufecturer's instructions complete all as specified and directed.

Supply and install deep freezer 215 ltrs capacity , energy efficient 5 star rating, glass top sliding door having the following specifications:- (a) Defrost type : Manual (b) No of doors : 2 (c) Door Mechanism :Sliding door (d) No. of compartments : 01 (e) Lock and water drain (f) Stabilizer free operation (g) 4 unidirectional rollers (j) Plastic shelf/basket : 2 Nos (k) Embosed inner lining

M&L Sub main wiring with 2 runs of single core, of size 4 sqmm PVC insulated, unsheathed, 1100 volts grade multi-stranded, copper conductor cables (FRLS H quality) drawn through PVC casing capping of size suitable with fitting/accessories, fixed on roof, walls, ceiling etc including PVC insulated, unsheathed, single core, multistranded, copper conductor as earth continuity wire 4 sqmm complete as specified and directed. Note : Rate includes (i) PVC casing capping and its accessories (ii) Two runs of cable and one run of earth wire of size 4 sqmm

Supply and fix modular geyser/AC box with plug top and indicator with MCB 20A C series 10 KA complete all as specified and directed

Vijay Construction and Company (BID ID -3494901)

L.T Associate (BID ID -3499522)

EAST PUNE SERVICES (BID ID -3499787)

SHREESAMARTH CONSTRUCTION (BID ID -3500203)

M/s Asrani and sons (BID ID -3500460)

S G Enterprises (BID ID -3506634)