Supply erection and commissioning of Electromechanical Equipments like VT Pumps, Electric Motors, LTDB Panel with Cable, MS Girder, Grating, Trash rack and other allied accessories and accessories at various PH of Siwani Canal and Garanpura PH

Amount

Supply, erection and commissioning of 50 Cs. VT Axial flow pumps of 740 RPM, having static lift of 17.50 feet, including delivery pipe (6+6 mtr.) as per actual size requirement and MS delivery bends of minimum 8mm thickness with Bituminous Paint inside & outside including flange welding, H.T. nut-bolt, Siphon Braker valve, complete in all respect, as per site and as per approved technical specifications (for PH-2 Siwani Canal & PH-3 Siwani Canal)

Supply, erection and commissioning of 30 Cs. V.T. Axial flow pumps of 965 RPM, having static lift of 17.5 feet, including delivery pipe (6+6 mtr.) as per actual site requirement and MS delivery bends of minimum 8 mm thickness with Bituminous Based Paint inside & outside including flange welding, H.T. nut-bolts, Siphon Breaker Valve, complete in all respect, as per site and as per approved technical specifications. (for PH-3 Siwani Canal ).

Supply, erection and commissioning of 10 Cs. V.T. Axial flow pumps of 1440 RPM, having static lift of 18 feet, including delivery pipe (6+6 mtr.) as per actual site requirement and MS delivery bends of minimum 8 mm thickness with Bituminous Based Paint inside & outside including flange welding, H.T. nut-bolts, Siphon Breaker Valve, complete in all respect, as per site and as per approved technical specifications. (for Escape PH-1 &2 Siwani Canal).

Supply, erection and commissioning of 40 Cs. V.T. Axial flow pumps of 980 RPM, having static lift of 17.5 feet, including delivery pipe (6+6 mtr.) as per actual site requirement and MS delivery bends of minimum 8 mm thickness with Bituminous Based Paint including flange welding, H.T. nut-bolts, Siphon Breaker Valve, complete in all respect, as per site and as per approved technical specifications. (for PH-7 Siwani Canal)

Supply, erection and commissioning of solid shaft motor of capacity 225 HP 8 Pole, 740 RPM, 3 Phase 415 Volt with efficiency class IE2 (As per IS 12615 with latest amendments) suitable for 50 Cs VT Axial Flow Pumps type vertical flange mounted & as per approved technical specification with earthing of motor (for PH-2 Siwani Canal & PH-3 Siwani Canal)

Supply, erection and commissioning of solid shaft motor of capacity 50 HP 6 Pole, 965 RPM, 3 Phase 415 Volt with efficiency class IE2 (AS PER is 12615 with latest amendments) suitable for 14 Cs VT Axial Flow Pumps type vertical flange mounted & as per approved technical specification with earthing of motor (for PH-1 Siwani Canal)

Supply, erection and commissioning of solid shaft motor of capacity 100 HP 6 Pole, 965 RPM, 3 Phase 415 Volt with efficiency class IE2 (As per IS 12615 with latest amendments) suitable for 30 Cs VT Axial Flow Pumps type vertical flange mounted & as per approved technical specification with earthing of motor (for PH-3 Siwani Canal)

Supply, erection and commissioning of solid shaft motor of capacity 60 HP of 4 pole, 1440 RPM, 3 phase 415 Volt with efficiency class IE2 (as per IS 12615 with latest amendments) suitable for 10 Cs. VT Axial flow pumps type vertical flange mounted & as per approved technical specification with earthing of motor. (for Escape PH-1&2 Siwani Canal).

Supply, erection and commissioning of solid shaft motor of capacity 150HP 6 Pole, 980 RPM, 3 phase 415 Volt with efficiency class IE2 (as per IS 12615 with latest amendments) suitable for 40 Cs. VT Axial flow pumps type vertical flange mounted & as per approved technical specification with earthing of motor. (for PH-7 Siwani Canal)

Supply, erection and commissioning of MCC Panel of 1600 Amp. Capacity with all accessories as one incomer ACB 4 pole 1600 Amp. with 4 No. outgoing each of having MCCB of 630 Amp. alongwith an-addl. MCCB of 100 Amp. for lighting loads, Indicators, Relay, Meters, Push buttons, bus bars and with 4 No. Fully Automatic ATS Starters( Completed in all respect like relays, indicators timer etc.). with suitable contactors rating with first filling of oil (if oil cooled ATS used) with suitable capacitor bank with 8 step APFCR, digital display instruments & other allied accessories for running of 4 Nos. 225 HP motors. Each Stage should have protection through separate MCCB as per approved design of LTDB panel with a stand of MS Channel ( 1 ft. Up from floor) & as per approved technical specification with earthing. (for PH 2 Siwani Canal).

Supply, erection and commissioning of 60HP fully Automatic starter having 250 Amp. MCCB, Contactors 150,110, 80A, Micro Controller based protection relay CT’s including suitable capacitor bank with all respect as per site requirement for 10 Cs. VT Pumps as per approved technical specifications with earthing. for Escape Siwani PH No. 1 &2

Supply, erection and commissioning of 100HP fully Automatic starter having 300 Amp. MCCB, Contactors 300,200, 110A, Micro Controller based protection relay CT’s including suitable capacitor bank with all respect as per site requirement for 20 Cs. VT Pumps as per approved technical specifications with earthing. for Escape Siwani PH No. 1

Supply, erection and commissioning of LTDB Panel of 1600 Amp. Capacity with all accessories as one incomer ACB 4 pole 1600 Amp. with 5 No. outgoing each of having MCCB of 400 Amp. alongwith an-addl. MCCB of 100 Amp. for lighting loads, Indicators, Relay, Meters, Push buttons, bus bars and with 5 No. Fully Automatic ATS Starters (Completed in all respect like relays, indicators timer etc.)with suitable contactor rating with first filling of oil (if oil cooled ATS used) with suitable capacitor bank with 8 step APFCR, digital display instruments & other allied accessories for running of 5 Nos. 150 HP motors. Each Stage should have protection through separate MCCB as per approved design of LTDB panel with a stand of MS Channel ( 1 ft. Up from floor) & as per approved technical specification with earthing. for PH 7 Siwani Canal

Dry type Cast Resin Voltage Step Down System ( X’mer, Shunt Capacitor Bank with reactor 200 kVar, VCB Panel I/O, 11 kv cable from Pole to VCB Panel & VCB to Transformer, LA (pole) with counter, LA(line), foundation for X'mer,Chemical Earthing (Neutral = 2 Nos. Body = 2 Nos., Pole & GO switch = 1 No., LA = 2 nos. VCB Panel = 2 Nos.), Stone pitching, fencing, Laying of HDPE pipe for cables, GO switch & Termination Kits) for 11/.433kV having Capacity of 1.6 MVA with transient Voltage protection system to protect the X’mer against High Voltage Surges of make Siemens / ABB / Schneider / GE. The scope also includes Inspection by M&M/DHBVN.

Dry type Cast Resin Voltage Step Down System ( X’mer, Shunt Capacitor Bank with reactor 200 kVar, VCB Panel I/O, 11 kv cable from Pole to VCB Panel & VCB to Transformer, LA (pole) with counter, LA(line), foundation for X'mer,Chemical Earthing (Neutral = 2 Nos. Body = 2 Nos., Pole & GO switch = 1 No., LA = 2 nos. VCB Panel = 2 Nos.), Stone pitching, fencing, Laying of HDPE pipe for cables, GO switch & Termination Kits) for 11/.433kV having Capacity of 1.0 MVA with transient Voltage protection system to protect the X’mer against High Voltage Surges of make Siemens / ABB / Schneider / GE. The scope also includes Inspection by M&M/DHBVN.

Supply, erection and commissioning of LT Power cable – Aluminum conductor Single Core 1000 mm2 XLPE Insulated, Cores Laid Up, PVC Inner sheathed Armored (galvanized steel strip) Extruded PVC Type ST2 Outer Sheathed, 650 V/1100 V Grade as per IS 7098 with Aluminum thimble, nut & bolt and other allied material completed in all respect (for Garanpura PH-1 RD 46600, Garanpura PH-2 RD51050, Garanpura PH-3 RD57300, PH-1 Siwani Canal, PH-2 Siwani Canal, PH-3 Siwani Canal, PH-4 Siwani Canal).

Supply, erection and commissioning of LT Power cable – Aluminum conductor 3.5 Core 630 mm2 XLPE Insulated, Cores Laid Up, PVC Inner sheathed Armored (galvanized steel strip) Extruded PVC Type ST2 Outer Sheathed, 650 V/1100 V Grade as per IS 7098-1995 with Aluminum thimble, nut & bolt and other allied material completed in all respect (for PH-4 Siwani Canal & PH-7 Siwani Canal)

Supply, erection and commissioning of LT Power cable – Aluminum conductor Single Core 300 mm2 XLPE Insulated, Cores Laid Up, PVC Inner sheathed Armored (galvanized steel strip) Extruded PVC Type ST2 Outer Sheathed, 650 V/1100 V Grade as per IS 7098 with Aluminum thimble, nut & bolt and other allied material completed in all respect. (for Garanpura PH-1 RD 46600, Garanpura PH-2 RD51050, Garanpura PH-3 RD57300 & PH-7, Siwani Canal

Supply, erection and commissioning of LT Power cable – LT Power Cables 3 Core X 185mm2 Copper Conductor XLPE Insulated, Cores Laid Up, PVC Inner sheathed, Armored (Galvanized steel strip), Extruded PVC Type ST2 Outer Sheathed, 650 V/1100 V Grade as per IS 7098 with Copper thimble, nut & bolt and other allied material completed in all respect (for Garanpura PH-1 RD 46600, PH-1 Siwani Canal, PH-2 Siwani Canal, PH-3 Siwani Canal & PH-7 Siwani Canal).

Supply, erection and commissioning of LT Power cable – LT Power Cables 3 Core X 120mm2 Copper Conductor XLPE Insulated, Cores Laid Up, PVC Inner sheathed, Armored (Galvanized steel strip), Extruded PVC Type ST2 Outer Sheathed, 650 V/1100 V Grade as per IS 7098 with Copper thimble, nut & bolt and other allied material completed in all respect. (for Garanpura PH-2 RD51050 & Garanpura PH-3 RD57300 ).

Supply, erection and commissioning of MS Girder – Parallel Flange Section (Conforming to IS 12778 : 2004) size NPB 400 X 180 mm2 (Weight per kg/mtr. 66.30) with primer and Bituminous Based Paint inside & outside. Note : 1. Removal of existing VT axial flow Pumps with Motors and after commissioning of work again installation of the same (VT axial Flow pumps with motors) will be complete by the agency in all respect with all civil works ((for various Pump Houses of Garanpura System & Siwani Canal System ).

Supply, erection and commissioning of MS Components duly primer and Bituminous based paint inside & outside with all civil work. (a) MS Grating of size as per actual site requirement. MS Grating should be by MS angle 40X40X6 mm & MS Flate 40X5 mm (b) Trash-rack of size as per actual site requirement. MS Trash-rack should be made by MS angle 50X50X6mm & MS Flate 50X6 mm

M/s KRP Engineering Pvt. Ltd.