SPECIAL REPAIRS TO BLDG NO. T-611 AT PEDONG AND PROVN OF CHEQUERED TILES NEAR BLDG NO. P-39 AT ALGARAH UNDER GE 867 EWS

Amount

S&F 0.63 mm thick galvanised, corrugated mild steel sheeting with two corrugation side lap fixed with "L" or "J" type hook bolts and bitumen washers as in roof covering etc.,with grade of Zinc coating 275 Grms/Sqm including taking down existing steel sheetng of any type complete all as specified and directed by Engineer-in-Charge.

S&F 0.63 mm thick galvanised, plain mild steel sheeting with two corrugation side lap fixed with "L" or "J" type hook bolts and bitumen washers as in ridges, hips,valley gutters, drip and straight flashing etc.,with grade of Zinc coating 275 Grms/Sqm including taking down existing steel sheetng of any type complete all as specified and directed by Engineer-in-Charge.

M&L for second class hard wood clean sawn scantling, unframed and fixed including taking down existing scantling complete all as specified and as directed by Engineer-in-Charge. WOOD: Sal/Kalasiris/Chaplash/Hollock/Bijasal

Taking down existing second class hard wood clean sawn scantling, unframed and and refixing in same location or new location in the same building complete all as specified and as directed by Engineer-in-Charge.

Dismantling timber in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section. Unframed work complete all as specified and as directed by Engineer-in-Charge.

S&F GI frame work of size 605 x 605 mm, for seamless celing comprising of GI perimeter chanel 0.55mm thick with two unequal flanges of 20 and 30 mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/ intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre including 6mm dia GI hangers (upto1200mm length) adjusting level and providing 4 mm thick asbestos cement plain building boards, fixed to GI frame work with screws as in ceiling and applying 3 coats of white wash including taking down existing ceiling boards of any type complete all as specified and as directed by Engineer-in-charge.

M&L for 4mm thick plywood with commercial face veneers, BWR grade, type BB, fixed with screws to tmber frame work in ceiling including taking down existing plywood of any type complete all as specified and directed by Engineer-in-Charge.

M&L preparing new wooden surfaces of any description over 10 cm width or girth and applying two coats of creosote oil complete all as specified and directed by Engineer-in-Charge.

M & L for modular fly ash bricks as in brick work straight or curved on plan exceeding 6m mean radious built in cement mortar 1:6 including demolition of brick work built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed by Engineer-in-charge.

Taking down cement plaster on brick or stone masonry surfaces of walls etc., including raking out joints, hacking for key, scrubbing down with water etc., and removing rubbish off the premises complete all as specified and directed by Engr-in-charge.

M&L for rendering 15 mm thick on brickwork or concrete surfaces in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and directed by Engr-in-charge.

M&L for rendering 15 mm thick on brickwork or concrete surfaces in cement mortar 1:4 finished fair and even including Integral waterproofing compound @ 3% by weight of cement as per manufacturer's instructions complete all as specified and directed by Engr-in-charge.

M&L for preparing newly plastered surfaces of walls and applying two coats of distemper oil emulsion over one coat of primer over thin layer of wall care putty (Birla white/Berger/Asian) complete all as specified and as directed by Engineer-in-Charge. Make: ASIAN/SHALIMAR/BERGER/ JENSON & NICHOLSON/IEL

M&L for Complete removal of the existing treatment on walls by scraping and washing down with water including making good the surfaces, and applying two coats of distemper oil emulsion over one coat of primer over thin layer of wall care putty (Birla white/Berger/Asian) complete all as specified and as directed by Engineer-in-Charge. Make: ASIAN/SHALIMAR/BERGER/ JENSON & NICHOLSON/IEL

M&L for preparation of old plastered/unplasterd white washed surfaces of walls and applying one coat of white washing complete all as specified and as directed by Engineer-in-Charge. Make : LOVELYCEM/ SURYACEM/ JANATHACEM/ LUCKYCEM or equivalent make as approved by GE.

M&L for Complete removal of the existing treatment on walls by scraping and washing down with water including making good the surfaces, and applying two coats of premium Exterior emulsion paint over one coat of primer complete all as specified and directed by Engineer-in-Charge. Make: APPEX of ASIAN or equivalent in JENSON & NICHOLSON/ BERGER/ SHALIMAR

M&L for preparing newly plastered surfaces of walls and applying two coats of premium Exterior emulsion paint over one coat of primer complete all as specified and directed by Engineer-in-Charge. Make: APPEX of ASIAN or equivalent in JENSON & NICHOLSON/ BERGER/ SHALIMAR

Taking down chowkats or frames with shutters (without taking off shutters from frames) area not exceeding 1.50 sqm each, including cutting holes for taking out hold fasts or dismantling brick work and making good in PCC 1:2:4 type B1 or cement mortar 1:4 (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt.) complete all as specified and as directed.

S&F steel window with side hung shutter, including box type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed by Engr-in-Charge.

S&F steel window with side hung shutter, including box type hinges with steel handle, and steel peg stay, complete with out glazing bars, dovetailed or welded complete all as specified and directed by Engr-in-Charge. Make for Item No. 19&20: -B A Enterprises/Multiwyn/Doorwyn/ Modern fabricator/Madhu industries/Ajanta Ispat/Alusys/AVA steels or equivalent as approved by GE.

S & F 3mm thick sheet glass ordinary quality fixed with oil putty and necessary clips/nut bolts or beads area not exceeding 0.5Sqm in each pane complete all as directed by Engr-in-Charge. Make:- TRIVENI/ SAINT GOBAIN/ MODIGUARD/ATUL/ HINDUSTAN or equivalent as approved by GE.

S & F galvanised mild steel wire cloth, 0.63 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or galvanised wire staples or wooden beeds all as specified and directed.

S&F Mild steel works as in grills, framed guard bars, and similar works conforming to Fe-290, Gde E-165 all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from frames) area exceeding 1.5 Sqm and not exceeding 4 sqm each, including cutting holes for taking out hold fasts or dismantling brick work and making good in PCC 1:2:4 type B1 or cement mortar 1:4 (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt.) complete all as specified and as directed.

S&F 125x60 mm size pressed steel door frame for doors made of 1.25mm sheet with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., including PCC 1:2:4 type B0 filling complete all as directed by Engr-in-Charge. Make: -B A Enterprises/Multiwyn/Doorwyn/Modern fabricator/Madhu industries/Ajanta Ispat/Alusys/AVA Ispat or equivalent as approved by GE.

S&F 30mm thick factory made flush shutters, solid core construction with block board core and plywood face panels, commercial type on both faces complete all as specified and directed by Engineer-in-Charge. Make: - Green Ply/Archid Ply or equivalent as approved by GE.

M&L preparing new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed by Engineer-in-Charge.

M&L preparing old painted wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge.

M&L preparing new steel and iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer complete all as specified and directed by Engineer-in-Charge.

M&L preparing old painted steel and iron surfaces of any description over 10 cm width or girth (other than in roof) and applying one coat of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge. Make for Item No. 27 to 30: ASIAN/ SHALIMAR/ BERGER/ JENSON&NICHOLSON/IEL/ NEROLAC

S&F 200 mm long Aluminium anodised barrel tower bolts of extruded aluminium section all as specified and directed.

S&F 150 mm long Aluminium alloy handles cast type anodised all as specified and directed.

S&F 300mm long aluminium alloy anodised sliding door bolts with hasp & staple (bolt type) and fixing clip of sheet , cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy all as specified and directed.

S&F Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, overall length of cover plate 150mm all as specified and directed. Make for Item No. 31 to 34: - CROWN/ CLASSIC/ JYOTHI/ AMIT/ MOWJEE/ARGENT/Bharat/Alans/Hettich/Everlite or any ISI marked make as approved by GE.

S&F in repairs harrison rails (curtain rods or drapery rods) aluminium powder coated 18-19mm dia with fixing brackets, stops, rollers etc., complete all as directed by Engineer-in-Charge.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick square/rectangular area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors etc., jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles laid on and including 15mm thick screed bed in cement mortar 1:6 including dismantling existing tiles and removing rubbish off the premises complete all as directed by Engr-in-charge.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick square/rectangular area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm,on vertical surfaces such as skirting, dados, raisers to steps etc., jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles laid on and including 10mm thick screed bed in cement mortar 1:4 including dismantling existing tiles and removing rubbish off the premises complete all as directed by Engr-in-charge.

M&L for coloured glazed ceramic tiles of size 300x200x7mm thick on vertical surfaces such as skirting/dado, jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles laid on and including 10mm thick rendering in cement mortar 1:4 backing coat including dismantling existing tiles and removing rubbish off the premises complete all as directed by Engineer –in-Charge. Make for Item No 36 to 38: NITCO/ SOMANY/ ASIAN / JOHNSON/KAJARIA/ORIENT BELL

M&L 75 mm thick PCC 1:3:6, type C2 (using 40mm graded stone aggregate) in plinth protection, paths etc., laid in alternative bays finished even and smooth without using extra cement including demolition of existing concrete and removing rubbish off the premises complete all as directed by Engr-in-charge.

M&L for 75 mm thick Plain Cement Concrete 1:3:6, type C2 (using 40mm graded stone aggregate) as in sub base and finishing even and rough to receive toping layer including demolition of existing concrete and removing rubbish off the premises complete all as specified and directed by Engineer-in-charge.

M&L for glosey finsh cement concrete chequered tiles 300 x 300 x 22 mm thick with grey cement and pigment, set and jointed in neat cement slurry and pointed in coloured cement to match the surfaces as in floors over and including 20 mm thick screed bed in cement mortar 1:4 including demolition of existing tiles and removing rubbish off the premisescomplete all as specified and directed. Make: NITCO/DECO/BHARAT or equivalent as approved by GE.

M&L for PCC 1:3:6 type C2 (using 40 mm graded stone aggregate) as in surface channels, drains including fair finishing inner surface of drain or channel using extra cement, including forms, moulds, mitred/ stopped ends etc., complete all as specified and directed.

S&F 150 mm dia half round PVC (heavy grade) eaves gutter fixed with MS brackets complete all as directed by Engr-in-Charge. NOTE: MS brackets shall be measured and paid seperately.

M&L Mild steel work such as bands, straps, clamps and hold fasts, support for rain water pipes, gutters etc., of Fe-290 Gde E-165 including taking down existing brackets all as specified and directed by Engr-in-Charge.

S&F PVC (SWR) pipes 110mm bore single socket in any length with rubber ring joints fixed to wall or laid in floors including taking down existing pipes complete all as directed by Engr-in-Charge.

S&F in repairs PVC (SWR) bends (any radius) suitable for 110mm bore pipe fitted with access door complete all as directed by Engr-in-charge.

M&L PVC (SWR) floor trap 75mm dia size with grating including jointing with solvent cement complete all as specified and directed by Engr-in-Charge.

S&F PVC (SWR) pipes 75mm bore single socket in any length with rubber ring joints fixed to wall or laid in floors or trenches including taking down existing pipes complete all as directed by Engr-in-Charge.

S&F in repairs PVC (SWR) bends (any radius) suitable for 75mm bore pipe fitted with access door complete all as directed by Engr-in-charge. Make for item No 45 to 49: PRINCE/ SUDHAKAR/ NANDI/ FINOLEX/ SWASTIK/SUPRIME

S&F 15mm bore GI water tubing medium grade with all fittings and fixed to wall, floor, ceiling complete including short lengths including taking down existing GI pipe complete all as specified and as directed by Engr-in-charge. Make: TATA/JINDAL/ZENITH

S&F in repairs bib taps 15 mm bore, cast copper alloy chromium plated screwed down high pressure, with crown or capstan head, screwed for iron pipe all as specified and directed by Engr-in-Charge.

Surface excavation not exceeding 30cmdeep and averaging 15 cm deep and getting out in soft/loose soil and removing the soil off the premises complete all as specified and directed.

M&L for 75 mm thick Plain Cement Concrete 1:3:6, type C2 (using 40mm graded stone aggregate) as in sub base and finishing even and rough to receive toping layer complete all as specified and directed by Engineer-in-charge.

M&L for cement concrete chequered tiles 300 x 300 x 22 mm thick with grey cement and no pigment, set and jointed in neat cement slurry and pointed in grey cement to match the surfaces as in floors over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed. Make: NITCO/DECO/BHARAT or equivalent as approved by GE.

M & L for modular fly ash bricks as in brick work straight or curved on plan exceeding 6m mean radious built in cement mortar 1:6 complete all as specified and directed by Engineer-in-charge.

M&L for rendering 15 mm thick on brickwork or concrete surfaces in cement mortar 1:4 finished fair and even complete all as specified and directed by Engr-in-charge.

M&L for preparation of new plastered surfaces of walls and applying three coats of white washing complete all as specified and as directed by Engineer-in-Charge. Make : LOVELYCEM/ SURYACEM/ JANATHACEM/ LUCKYCEM or equivalent make as approved by GE.

M&L for point wiring with 1.5 Sqmm (nominal area) PVC insulated un - sheathed single core stranded copper conductor FRLS cable 1100 volts grade (conforming to IS) drawn through and including rigid non metallic PVC casing and capping, medium grade of suitable size with all necessary fittings, fixed on walls/ceilings etc., including 1.5 Sq mm PVC insulated copper conductor FRLS cable for earth continuity conductor and connected to earth dolly and to be terminated in 1.6 mm thick pressed steel terminal boxes concealed type/surface type for mounting fittings like switch, socket, fan regulator etc. with 3 mm thick laminated bakelite sheet cover (Make: Hylem or equivalent ) for housing switches, socket outlet, regulator etc., for one light /fan point controlled by one switch/one bell / buzzer point controlled by one bell push/one 3 / 5 -pin switch socket outlet 5 amps on independent board including taking down existing unserviceable point wiring including switches, sockets, regulators, ceiling roses, terminal boxes and making good disturbed surfaces including testing on completion complete all as specified and directed by Engineer-in-Charge.

All as per item No. 58 above but for One 3/5 pin switch socket outlet 5 amps on same board along with other switches complete all as specified and directed by Engineer-in-Charge.

M&L for point wiring with 2.5 Sqmm (nominal area) PVC insulated un - sheathed single core stranded copper conductor FRLS cable 1100 volts grade (conforming to IS) drawn through and including rigid non metallic PVC casing and capping, medium grade of suitable size with all necessary fittings, fixed on walls/ceilings etc., including 2.5 Sqmm PVC insulated copper conductor FRLS cable for earth continuity conductor and connected to earth dolly and to be terminated in 1.6 mm thick pressed steel terminal boxes concealed type/surface type for mounting fittings like switch, socket, fan regulator etc. with 3 mm thick laminated bakelite sheet cover (Make: Hylem or equivalent ) for housing switches, socket outlet, regulator etc., for one 5 / 6 -pin switch socket outlet 15 amps on independent board including taking down existing unserviceable point wiring including switches, sockets, regulators, ceiling roses, terminal boxes and making good disturbed surfaces including testing on completion complete all as specified and directed by Engineer-in-Charge. Make for Item No. 58 to 60 Cable: (i) Finolex, (ii) Plaza, (iii) Havells, (iv) Polycab, (v) KEI, (vi) Anchor Casing&Caping: (i) Kinjal, (ii) Alwyn (iii) Harsh, (iv) Finolex (v) Berlia (vi) Plaza

S&F switch piano, flush button, single pole, 5 amps, one way complete all as specified and as directed by Engineer-in-Charge.

S&F switch socket combination 2 – in – one, 3 Pin / 5 Pin, 5 amps flush type complete all as specified and as directed by Engineer-in-Charge.

S&F switch socket combination 2 – in – one 6 Pin , 5 / 15 amps flush type complete all as specified and as directed by Engineer-in-Charge.

S&F lamp holder, insulated body with back plate for batten fittings complete all as specified and as directed by Engineer-in-Charge.

S&F ceiling rose 3 terminal PVC/Polycarnonate, isolated body complete all as specified and as directed by Engineer-in-Charge. Make for Item No. 61 to 65: (i) Anchor (ii) Plaza, (iii) Havells (Crabtree) (iv) ABB (v) Shalabh

S&F Energy efficient LED Tube light fitting, 1x18/20 watt, with LED tube rod 18/20 Watt with bipin holders, connector block etc., complete with all accessories internally prewired and including connecting up with three core pvc sheathed flexible copper conductor cable of size 1 sqmm including taking down existing fitting and making good disturbed surfaces complete all as specified and as directed by Engineer-in-Charge. Make: Cat part DMLN1LT8-16 of Fitting and LTT8-20 of rod of Crompton or HSN Code:8539 & MAS18W865 T8I-2100lm(PC body),20W865 T8INDI-2100 lm(rod) of Philips or Cat No. SUB118T8 LED(Body),SLETL-DSPC REFORM of Surya.

S&F sheet metal enclosure DB SPN 8 way 240 V with 200 Amp rated bus bar, powder coated, double door including taking down old unserviceable DB complete all as specified and as directed by Engineer-in-Charge.

Supply and Fixing of MCB SPN 40 Amps, 10 KA breaking capacity, 240 volts, 50 Hz complete all as specified and as directed by Engineer-in-Charge.

Supply and Fixing of MCB SP 6 to 32 Amps, 10 KA breaking capacity, 240 volts, 50 Hz complete all as specified and as directed by Engineer-in-Charge. Make for Item No. 67 to 69: HPL/INDOASIAN/ HAVELLS/C&S/ STANDARD

Earthing in repairs complete with galvanized steel earth plate electrode 600 x 600 x 6.3 mm buried directly in ground ( earth pit not less than 2.25 m deep bellow ground level ) with top edge of the plate not less than 1.5 m below normal ground level, connected to GI earth lead wire 4 mm dia. by means of galvanized iron or steel bolts , nuts , check nuts and washers, and connected to equipments as directed , including funnel with GI medium grade watering pipe 20 mm bore , wire mesh , charcoal or coke and common salt in alternate layers of 15 cm compacted thickness all around the earth electrode , with concrete pit in PCC 1:3:6 type C-1 , 50 mm thick pre cast RCC 1 : 2 : 4 type B-1 cover slab reinforced with 8 mm dia deformed bar 15 cm C/C and suitable handle of 10 mm dia round bar, 15 mm GI medium grade pipe for earth lead protection including necessary excavation earth work in soft/loose soil and disposal of spoil to a distance n.exc. 50 m and necessary testing complete all as shown on electrical plate No. 3 of MES SSR Part-I complete all as specified and as directed by Engineer-in-Charge. NOTE: Rate quoted shall be deemed to include for earth lead and protection pipe upto 7.5m.

Sub Total of Schedule 'A'

Schedule of Credit (Minus) Rs. 31,400.00 B/F from Ser page No. 31 NOTE: Bidder shall insert credit amount as rate Rs. 31,400.00 in Green field under Col-M. If bidder does not insert the amount the same will be deducted from total amount of Schedule 'A' and accordingly total amount of tender will be considered in deciding the lowest tender.

Sub Total of Schedule of Credit

SANJAY SAW MILL

MS MAYA PRAKASH GOEL AND SONS

RAMESH GURUNG

MS BRAHMA CONSTRUCTION

RAJU TAMANG

G K SUTHAR