Loading…
Loading…
Tender Value
Refer Docs
EMD Value
₹40,000
Closing Date
28 Aug 2026, 6:00 pm5d left
GE (NW) Mankhurd
GE (NW) Mankhurd
VARIOUS REPAIR RENEWAL OF DEFECTIVE WORNOUT SPARES IN EM WATER SUPPLY INSTALLATION INCLUDING COMPREHENSIVE REPAIR MAINT OF LT PANEL, LT UG CABLE, APFC PANEL AND ALLIED WORKS AT NRS AT 31 WEU THANE UNDER GE (NW) MANKHURD.
2026_MES_783338_1
8585/E8
Open Tender
Civil Works
Item Rate
270 days
Mankhurd
As per tender document
8 documents required · 8 mandatory
₹500
Yes
GE (NW) Mankhurd
₹40,000
Yes
7 Aug 2026
7 Aug 2026
31 Aug 2026
7 Aug 2026
28 Aug 2026
21 Aug 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | M & L in repairs for servicing of Centrifugal pump set of capacity 20 HP by opening end covers, greasing the bearings, replacing worn out nut, bolts, gasket, air release valve key, gland stuffing box male/ female set, Rubber bush and painting one coat of synthetic enamel paint, including writing/marking in 1" size letters SM & MES No. for the following capacity of pumps:- | 1 | Job | - | - |
| 2 | All as per Item No 1.00 above but Pump set 15 HP | 1 | Job | - | - |
| 3 | All as per Item No1.00 above but Pump set 5HP | 1 | Job | - | - |
| 4 | Supply and fix in repairs/replacement of old unserviceable Cast iron tank cover with MS strip /flat iron framework with all necessary fixing and locking arrangement nuts,bolts all as per BMC standards any required alteration to the tank for fixing of new CI covers all as specified and directed by the Engineer -in-Chief of sizes:- 508mm dia. (weight of tank cover not less than 12 Kgs) | 50 | Each | - | - |
| 5 | M&L for rewinding of electric motor 20 HP 3 phase 50 Hz 415 volt of following capacities complete all as directed and specified as under:
(a) Disconnecitng, dismantling existing burnt widning from motor and rewinding complete with super enamled copper winding wire of matching gauge including all insulation material such as PVC insulated sheet, cotton tape sleeves varnish etc. (b) Transporting electric motor including loading/ unloading upto wksp and back to site. (c) Re-installing the same at the orignal locaition with proper alignmenent connecting and testing on load.
(d) Replacement 2 Nos ball bearing for each motor of existing size/model. Make- SKF/NBC/TATA. (e) Replacement of winding terminal plate with brass stus,/ nut, bolt washer. | 1 | Job | - | - |
| 6 | All as per Item No 5.00 For Motor 15 HP Cap | 2 | Job | - | - |
| 7 | S&F in repairs the following component in existing LT Kiosks (Idoor/Outdoor) including disconnecting and taking down at different locations all as directed :-
Voltmeter Digital type ,0-500 Volts of size 96x96mm. | 10 | Each | - | - |
| 8 | All as per item No 7 but Ammeter Digital type of upto 400 amps capacity of size 96X96mm. | 5 | Each | - | - |
| 9 | M&L in repairs selector switch for voltmeter / Ammeter complete. | 5 | Each | - | - |
| 10 | M&L in repairs Phase indicating lamp neon type complete with holder assy RYB phase complete. | 15 | Each | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.37 MB
8585General.pdf
Tender Documents • 0.84 MB
BOQ_877649.xls
BOQ • 0.40 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].