Loading
Loading…
Loading…
Tender Value
₹4.2 Cr
EMD Value
₹8.4 L
Closing Date
9 Oct 2026, 3:00 pm
No
No
Single Packet System
Normal Tender
Yes
18/09/2026 15:00
Lowest to Highest
60 days
Expenditure
Capital (Works)
NRCH
14 conditions · 2 needing a document upload
Financial Eligibility Criteria: The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
Technical Eligibility Criteria: The Tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i) Three similar works costing not less than the amount equal to 30% of advertised value of the tender, or (ii) Two similar works costing not less than the amount equal to 40% of advertised value of the tender, or (iii) One similar work costing not less than the amount equal to 60% of advertised value of the tender. (b) (i) In case of tender for composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges - substructure, superstructure etc.), tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i) Three similar works costing not less than the amount equal to 30% of advertised value of each component of tender, or (iii) Two similar works costing not less than the amount equal to 40% of advertised value of each component of tender, or (iv) One similar work costing not less than the amount equal to 60% of advertised value of each component of tender. Note for (b) (i) Separate completed works of minimum required values shall also be considered for fulfillment of technical eligibility criteria for different components. (b) (ii) In such cases, what constitutes a component in a composite work shall be clearly pre-defined with estimated tender cost of it, as part of the tender documents without any ambiguity. (b) (iii) To evaluate the technical eligibility of tenderer, only components of work as stipulated in tender documents for evaluation of technical eligibility, shall be considered. The scope of work covered in other remaining components shall be either executed by tenderer himself if he has work experience as mentioned in clause 7 (a) (ii) of Part-II of the Standard General Conditions of Contract or through subcontractor fulfilling the requirements as per clause 7 of the Standard General Conditions of Contract Part-II of GCC or jointly i.e., partly himself and remaining through subcontractor, with prior approval of Chief Engineer in writing. However, if required in tender documents by way of Special Conditions, a formal agreement duly notarised, legally enforceable in the court of law, shall be executed by the main contractor with the subcontractor for the component(s) of work proposed to be executed by the subcontractor(s), and shall be submitted along with the offer for considering subletting of that scope of work towards fulfilment of technical eligibility. Such subcontractor must fulfil technical eligibility criteria as follows: The subcontractor shall have successfully completed at least one work similar to work proposed for subcontract, costing not less than 35% value of work to be subletted, in last 5 years, ending last day of month previous to the one in which tender is invited through a works contract. Note: for subletting of work costing up to Rs 50 lakh, no previous work experience of subcontractor shall be asked for by the Railway. In case after award of contract or during execution of work it becomes necessary for contractor to change subcontractor, the same shall be done w
Defination of Similar Work :- Providing & Installation of Modular operation theater.
13 conditions · 2 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Tenderer may please note that offers received without requisite/mandatory documents as mentioned above, will be considered as invalid tender and for which contractor shall have no claim on Railway.
The tenderer shall visit the site of work and acquaint himself/themselves with the conditions of work viz. approach roads and accessibility, availability of materials, electric power, water for work and drinking purposes, site for labour camps, stores, godowns, extent of lead/lift in work, availability of skilled and unskilled labour etc. that may be encountered in the course of execution of work. In short, he/they should familiarize himself/themselves fully with the all the conditions of the work site & all the financial implications due to the above conditions is deemed to be understood and taken care of while bidding the offer.
Provision of new Modular Robotic OT and alied work at NRCH under Director/Administration/NRCH.
NIT-07-A-NRCH-26-27~NR
NIT-07-A-NRCH-26-27
Open
Works - General
4 Months
Unknown (Unspecified Location)
₹0
₹8.4 L
8 Sept 2026
8 Sept 2026
25 Sept 2026
18 Sept 2026
132 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | Disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 10 km for all lifts, complete as per directions of Engineer-in-charge. | cum | 400 | 411.3 | 1,64,520 |
| 2 | All kinds of soil. | cum | 1 | 286.85 | 286.85 |
| 3 | 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) | cum | 10 | 6,326.05 | 63,260.5 |
| 4 | Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer's specification. | Per bag of cement of 50kg | 150 | 57.15 | 8,572.5 |
| 5 | Extra for concrete work in superstructure above floor V level for each four floors or part thereof. | cum | 3 | 1,294.45 | 3,883.35 |
| 6 | cum | 1 | 10,719.3 | 10,719.3 | |
| 7 | Foundations, footings, bases of columns, etc. for mass concrete | Sqm | 20 | 307.95 | 6,159 |
| 8 | Suspended floors, roofs, landings, balconies and access platform | Sqm | 20 | 766.55 | 15,331 |
| 9 | Shelves (Cast in situ) | Sqm | 20 | 766.55 | 15,331 |
| 10 | Lintels, beams, plinth beams, girders, bressumers and cantilevers | Sqm | 40 | 608.35 | 24,334 |
| 11 | Thermo-Mechanically Treated bars of grade Fe-500D or more. | Kg | 100 | 89.65 | 8,965 |
| 12 | Thermo-Mechanically Treated bars of grade Fe-500D or more. | Kg | 300 | 89.65 | 26,895 |
| 13 | Smooth finishing of the exposed surface of R.C.C. work with 6 mm thick cement mortar 1:3 (1 Cement : 3 fine sand). | Sqm | 50 | 253.05 | 12,652.5 |
| 14 | Cement mortar 1:4 (1 cement : 4 coarse sand) | cum | 1 | 6,882 | 6,882 |
| 15 | Cement mortar 1:6 (1 cement : 6 coarse sand) | cum | 2 | 8,288.35 | 16,576.7 |
| 16 | Cement mortar 1:4 (1 cement :4 coarse sand) | Sqm | 50 | 1,018.05 | 50,902.5 |
| 17 | Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick masonry. | Sqm | 50 | 86.45 | 4,322.5 |
| 18 | Granite work | Metre | 200 | 418.85 | 83,770 |
| 19 | Fastener with threaded dia 10 mm | Each | 84 | 33.8 | 2,839.2 |
| 20 | Decorative veneer facings approved manufacture | Sqm | 20 | 1,645.8 | 32,916 |
| 21 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. | Sqm | 200 | 1,063.45 | 2,12,690 |
| 22 | Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building , for all heights and all levels etc. including: (a) Structural analysis & design and preparation of shop drawings for pressure equalisation or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design. (b) Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour of approved shades made out of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc. (c) The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanised with serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bi-metallic contacts all complete required to perform as per specification and drawing The item includes cost of all material & labour component, the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium composite panel cladding till the handing over of the building for occupation. Base frame work for ACP cladding is payable under the relevant aluminium item.s The Contractor shall provide curtain wall with aluminium composite panel cladding, having all the performance characteristics all complete , as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer-in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm. up to two decimal places. | Sqm | 95 | 4,474.2 | 4,25,049 |
| 23 | Second class teak wood | cum | 2 | 1,31,576.95 | 2,63,153.9 |
| 24 | 5.0 mm thick glass panes (weight not less than 12.50 kg/sqm). | Sqm | 5 | 2,231.2 | 11,156 |
| 25 | 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws | Sqm | 30 | 3,086.1 | 92,583 |
| 26 | 125x64x1.90 mm | Each | 30 | 95.5 | 2,865 |
| 27 | 75 mm | Each | 30 | 149.7 | 4,491 |
| 28 | Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. | Each | 30 | 1,025.65 | 30,769.5 |
| 29 | Size 40 mm | Each | 50 | 272.95 | 13,647.5 |
| 30 | Providing and fixing 2nd class teak wood lipping/ moulded beading or taj beading of size 18X5 mm fixed with wooden adhesive of approved quality and screws/nails on the edges of the Pre-laminated particle board as per direction of Engineer-in-charge. | Metre | 200 | 85.6 | 17,120 |
| 31 | Double strip (horizontal type) | Each | 50 | 34.15 | 1,707.5 |
| 32 | Providing and fixing powder coated telescopic drawer channels 300 mm long with necessary screws etc. complete as per directions of Engineer- in-charge. | Set | 100 | 355.05 | 35,505 |
| 33 | 1.0 mm thick | Sqm | 40 | 764 | 30,560 |
| 34 | Second class teak wood | Sqm | 20 | 4,484.65 | 89,693 |
| 35 | With 2nd class teak wood beading 62X19 mm | Sqm | 30 | 1,404.25 | 42,127.5 |
| 36 | Providing and fixing 19mm thick both side balancing lamination factory pressed BWP grade marine ply as per IS 710 of approved brand boxes,shelves,racks,almirah,cupboard and drawer etc. including necessary nails,screws etc. complete as per direction of Engineer-in-charge. | Sqm | 50 | 2,339.6 | 1,16,980 |
| 37 | Providing and fixing stainless steel soft closing spring hinges at 0 degree hinges (hydraulic type) of approved make/brand to cupboard shutters with full threaded steel screws including making necessary recess in board and finished etc. complete as per direction of Engineer-in-charge. | Each | 50 | 226.75 | 11,337.5 |
| 38 | Hot finished welded type tubes | Kg 2000 | — | 154.9 | 3,09,800 |
| 39 | In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete | Kg | 300 | 102.25 | 30,675 |
| 40 | In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works | Kg 1000 | — | 142.3 | 1,42,300 |
| 41 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). | Kg 4000 | — | 612.25 | 24,49,000 |
| 42 | Size of Tile 1000x1000 mm | Sqm | 50 | 2,551.95 | 1,27,597.5 |
| 43 | Size of Tile 600 x 600 mm | Sqm | 50 | 1,311.05 | 65,552.5 |
| 44 | Size of Tile 1000x1000 mm | Sqm | 20 | 2,604.75 | 52,095 |
| 45 | Polished Granite stone slab colour of Black, Cherry/Ruby Red or equivalent | Sqm | 100 | 3,908.8 | 3,90,880 |
| 46 | With common burnt clay F.P.S. (non modular) brick tiles of class designation 10 | Sqm | 200 | 549.05 | 1,09,810 |
| 47 | In 75x75 mm deep chase | Metre | 70 | 260.2 | 18,214 |
| 48 | Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete. | Each | 20 | 266.6 | 5,332 |
| 49 | 12.5 mm thick tapered edge gypsum moisture resistant board | Sqm | 200 | 1,300.5 | 2,60,100 |
| 50 | GI Metal Ceiling Clip in plain Beveled edge global white color tiles of size 600x600 and 0.5 mm thick with 25 mm height, made of G I sheet having galvanizing of 100 gms/ sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending. | Sqm | 100 | 1,871.8 | 1,87,180 |
| 51 | 0.71mm Aluminium profile with center to center pitch of 175 mm, depth of 46mm, top crest width of 41mm, bottom valley width of 80mm, overall profile width of 1144mm, cover width 1050mm. | Sqm | 100 | 1,488.9 | 1,48,890 |
| 52 | Precoated/mill finish aluminium Ridges plain (500- 600mm) | Metre | 20 | 969.5 | 19,390 |
| 53 | Precoated/mill finish aluminium Gutter (600 mm over all girth) | Metre | 20 | 1,616 | 32,320 |
| 54 | 1:4 (1 cement: 4 coarse sand) | Sqm | 400 | 307.25 | 1,22,900 |
| 55 | Neat cement punning. | Sqm | 200 | 67.8 | 13,560 |
| 56 | Extra for plastering exterior walls of height more than 10 m from ground level for every additional height of 3 m or part thereof. | Sqm | 200 | 72.8 | 14,560 |
| 57 | Water thinnable cement primer | Sqm 1000 | — | 64.45 | 64,450 |
| 58 | With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works | Sqm | 250 | 55.5 | 13,875 |
| 59 | Extra for addition of synthetic Polyester triangular fibre of length 6 mm, effective diameter 10-40 microns and specific gravity of 1.34 to 1.40 in cement plaster/mortar by using 125 gms. of synthetic Polyester triangular fibre for 50 Kgs. cement used in cement mortar as per directions of Engineer- in-Charge. | Per bag of cement of 50kg | 100 | 68.55 | 6,855 |
| 60 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. | Sqm 1000 | — | 123.85 | 1,23,850 |
| 61 | 75 mm diameter pipes | Metre | 50 | 23.5 | 1,175 |
| 62 | 100 mm diameter pipes | Metre | 50 | 30.2 | 1,510 |
| 63 | 150 mm diameter pipes | Metre | 50 | 43.45 | 2,172.5 |
| 64 | One or more coats on old work | Sqm 2000 | — | 90.85 | 1,81,700 |
| 65 | One or more coats on old work | Sqm | 250 | 86.55 | 21,637.5 |
| 66 | Old work (one or more coats applied @ 0.83 ltr/10 sqm). | Sqm 2000 | — | 74.1 | 1,48,200 |
| 67 | Polishing in high gloss/matt finish melamine clear polish on wood work in required color/wooden shade texture with following process in the sequence as detailed below: 1. The surface to be polished is rubbed with sand paper 80/120 no. and then with sand paper of 160/180 nos. 2. Applying two coats of sealer with spray gun and allowing sufficient drying time for 1st coat and 2nd coat is allowed to dry for 8 to 12 hrs. 3. On drying of sealer coat, wet rubbing with emery cloth of finer grading with ample water to remove excess sealer layer and make the surface further smooth after this wet rubbing, then surface is applied with special grade melamine fillers to fill all the small and big holes/grooves etc. Filler coat to be allowed to dry for 4 to 6 hrs on which again a light wet rubbing is done this surface is further allowed to dry for 12 hrs. 4. On this, 1st coat of melamine polish is applied with spray gun using melamine clear polish and melamine thinner in required proportion. This 1st coat is allowed to dry for 24 hrs then this dry surface is again fine wet rubbed smooth, which is further allowed to dry for 12 hrs. The final melamine polish is applied with compressor pressure spray gun using melamine clear polish and melamine thinner mixed in required proportion complete as per direction of Engineer-in-Charge. (Final coat to be done in 1 or 2 layers without gap of time.) | Sqm | 150 | 1,156.55 | 1,73,482.5 |
| 68 | With cement mortar 1:4 (1cement: 4 coarse sand) | Sqm | 50 | 478 | 23,900 |
| 69 | For door/ window/ clerestory window | Sqm | 50 | 1,046.95 | 52,347.5 |
| 70 | Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) | cum | 5 | 2,007.1 | 10,035.5 |
| 71 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. | cum | 1 | 2,928.1 | 2,928.1 |
| 72 | In cement mortar | cum | 5 | 1,698.45 | 8,492.25 |
| 73 | From brick work in cement mortar | 1000 1000 Nos. | — | 5,522.25 | 5,522.25 |
| 74 | Of area 3 sq. metres and below | Each | 10 | 302.7 | 3,027 |
| 75 | For thickness of tiles 10 mm to 25 mm | Sqm | 100 | 60.5 | 6,050 |
| 76 | Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. | Sqm | 10 | 219.75 | 2,197.5 |
| 77 | Demolishing brick tile covering in terracing including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. | Sqm | 50 | 86.8 | 4,340 |
| 78 | Demolishing mud phaska in terracing and disposal of material within 50 metres lead. | cum | 50 | 753.75 | 37,687.5 |
| 79 | 75 to 80 mm dia pipe | Metre | 50 | 62.4 | 3,120 |
| 80 | 100 mm dia pipe | Metre | 50 | 64.3 | 3,215 |
| 81 | 15 mm to 40 mm nominal bore | Metre | 50 | 124.1 | 6,205 |
| 82 | Above 40 mm nominal bore | Metre | 50 | 134.25 | 6,712.5 |
| 83 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. | Sqm | 100 | 45.05 | 4,505 |
| 84 | Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in- charge. | Sqm | 100 | 46.5 | 4,650 |
| 85 | White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests | Each | 5 | 5,781.35 | 28,906.75 |
| 86 | White glazed fire clay kitchen sink of size 600x450x 250 mm | Each | 5 | 3,302.95 | 16,514.75 |
| 87 | 510x1040 mm bowl depth 250 mm | Each | 2 | 6,008.45 | 12,016.9 |
| 88 | 610x510 mm bowl depth 200 mm | Each | 5 | 4,274.4 | 21,372 |
| 89 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. | Each | 10 | 299.35 | 2,993.5 |
| 90 | Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge. | Each | 5 | 886.25 | 4,431.25 |
| 91 | Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. (a) 15 mm nominal dia | Each | 5 | 6,119.15 | 30,595.75 |
| 92 | C.P. brass | Each | 5 | 680.8 | 3,404 |
| 93 | Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete. | Each | 5 | 13,036.55 | 65,182.75 |
| 94 | Providing and fixing white vitreous china battery based infrared sensor operated urinal of approx. size 610 x 390 x 370 mm having pre & post flushing with water (250 ml & 500 ml consumption), having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of Engineer-in- charge. | Each | 2 | 7,004.45 | 14,008.9 |
| 95 | Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge. | Each | 5 | 16,100.4 | 80,502 |
| 96 | 15 mm dia nominal bore | Metre | 150 | 485.2 | 72,780 |
| 97 | 20 mm dia nominal bore | Metre | 100 | 541.1 | 54,110 |
| 98 | 50 mm dia nominal bore | Metre | 50 | 654.2 | 32,710 |
| 99 | 25 mm nominal bore | Each | 10 | 532.35 | 5,323.5 |
| 100 | 50 mm nominal bore | Each | 5 | 878.25 | 4,391.25 |
| 101 | Vertical | Each | 2 | 1,320.8 | 2,641.6 |
| 102 | 15 mm nominal bore | Each | 50 | 85.2 | 4,260 |
| 103 | 15 mm nominal bore | Each | 40 | 262.3 | 10,492 |
| 104 | 25 mm nominal bore | Each | 20 | 369.35 | 7,387 |
| 105 | 50 mm nominal bore | Each | 10 | 706.7 | 7,067 |
| 106 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. | Litre 20000 | — | 9.7 | 1,94,000 |
| 107 | 15 mm nominal bore | Each | 10 | 708.4 | 7,084 |
| 108 | 15 mm nominal bore | Each | 10 | 594.75 | 5,947.5 |
| 109 | 15mm nominal bore | Each | 20 | 500.35 | 10,007 |
| 110 | Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in- charge. | Each | 50 | 61.7 | 3,085 |
| 111 | 15 mm nominal bore | Each | 5 | 8,050.5 | 40,252.5 |
| 112 | 300 mm dia. R.C.C. pipe | Metre | 50 | 902.05 | 45,102.5 |
| 113 | Circular shape 560 mm internal diameter | Each | 5 | 1,494.2 | 7,471 |
| 114 | With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 | Each | 5 | 5,589.45 | 27,947.25 |
| 115 | Powder coated aluminium (minimum thickness of powder coating 50 micron) | Kg 1000 | — | 466.3 | 4,66,300 |
| 116 | Powder coated aluminium (minimum thickness of powder coating 50 micron) | Kg | 500 | 564.8 | 2,82,400 |
| 117 | Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side | Sqm | 50 | 965.1 | 48,255 |
| 118 | With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) | Sqm | 20 | 1,019.8 | 20,396 |
| 119 | With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) | Sqm | 50 | 1,325.55 | 66,277.5 |
| 120 | With stainless steel cover plate minimum 1.25 mm thickness | Each | 10 | 2,448.85 | 24,488.5 |
| 121 | Upto 5mm depth and 5 mm width | Metre | 20 | 85.25 | 1,705 |
| 122 | Powder coated minimum thickness 50 micron aluminium | Each | 20 | 89.6 | 1,792 |
| 123 | Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge. (Only weight of grill to be measured for payment). | Kg | 30 | 560.85 | 16,825.5 |
| 124 | Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying :(a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours.(b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours.The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry. | Sqm | 25 | 516.6 | 12,915 |
| 125 | Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying:(a) after surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm.(b) laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm.(c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg/sqm and coarse sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30 cm on parapet wall and tucked into groove in parapet all around.(d) fourth and final layer of brick tiling with cement mortar (which will be paid for separately.For the purpose of measurement the entire treated surface will be measured. | Sqm | 200 | 585.55 | 1,17,110 |
| 126 | Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) | cum | 20 | 7,510.75 | 1,50,215 |
| 127 | P r o v i d i n g and applying fibre reinforced elastomeric liquid water proofing membrane with resilient acrylic polymers having Sun Reflectivity Index (SRI) of 105 on top of concrete roof in three coats @10.76 litre/ 10 sqm. One coat of self-priming of elastomeric waterproofing liquid (dilution with water in the ratio of 3:1) and two coats of undiluted elastomeric waterproofing liquid (dry film thickness of complete application/system not less than 500 microns). The operation shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes, complete in all respect as per the direction of Engineer-in-Charge. | Sqm | 200 | 474.15 | 94,830 |
| 128 | Providing and fixing concealed hinge of approved quality for 19-20mm thick door with stainless steel screws complete : | Each | 50 | 115.55 | 5,777.5 |
| 129 | Bars upto 12 mm diameter | Metre | 50 | 6.65 | 332.5 |
| 130 | Epoxy bonding adhesive having coverage 2.20 sqm/kg of approved make | Sqm | 30 | 390.45 | 11,713.5 |
| 131 | 25 mm average thickness in 2 layers. | Sqm | 100 | 510.5 | 51,050 |
| 132 | Wooven PVC cloth | Sqm | 100 | 45.7 | 4,570 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
SpecialConditionElect.Robotic.pdf
ATTACHMENT
TenderDoucment.pdf
ATTACHMENT
GCC-2022withCSupto9.pdf
ATTACHMENT
correctionslip-12.pdf
ATTACHMENT
Specialinstructionstothetenderer1.pdfSECURED.pdf
ATTACHMENT
ACS11GCCWorks2026March.pdf
ATTACHMENT
SpecificationofnewmodularroboticOT2_compressed.pdf Spl Medical T and C as Annexure G
ATTACHMENT
SpecificationST.pdf
ATTACHMENT
ACS10GCC2022dt04.03.251.pdf
ATTACHMENT
similarnatureofwork.pdf
ATTACHMENT
SpecificationofnewmodularroboticOT2_compressed.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .