Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹2.9 LAccepted-Finance | ₹2.9 L | L1 | Accepted-Finance 1st lowest |
| 2 | L2₹3.0 LAccepted-Finance | ₹3.0 L | L2 | Accepted-Finance 2nd lowest |
| 3 | L3₹3.1 LAccepted-Finance | ₹3.1 L | L3 | Accepted-Finance 3rd lowest |
| 4 | L4₹3.1 LAccepted-Finance | ₹3.1 L | L4 | Accepted-Finance 4th lowest |
Tender Value
₹3.3 L
EMD Value
₹6,568
Closing Date
21 Apr 2026, 10:00 amClosed
Executive Engineer, Store Division, APWD, Sri Vija
Executive Engineer, Store Division, APWD, Sri Vijaya Puram
Repair and Maintenance of Door, Window, Ridge, Gutter in Store Complex.
2026_APWD_22664_1
e-Tender/DB/SD/2025-26/31 dt 08/04/2026
Open Tender
Civil Works - Others
30 days
Executive Engineer, Store Division, APWD, Store Di
4 documents required · 4 mandatory
₹0
₹6,568
Yes
27 Apr 2026
9 Apr 2026
21 Apr 2026
9 Apr 2026
21 Apr 2026
9 Apr 2026
9 Apr 2026 - 20 Apr 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount | Item Code |
|---|---|---|---|---|---|---|
| 1Providing and fixing factory made uPVC glazed/wire mesh windows/doors comprising of lead free uPVC multi-chambered frame, sash and mullion/coupler (where ever required) extruded profiles having minimum wall thickness of 1.70 mm for Series R1 and R2 profiles and 2.10 mm for Series R3 and R4 profiles conforming to EN: 12608 in any shape, colour and design duly reinforced with galvanized mild steel section made of required shape & size as per CPWD Specification, uPVC extruded glazing beads, interlocks and Inline sash adaptor (where ever required) of appropriate dimension, EPDM gasket, hardware, SS 304 grade fasteners of minimum 8 mm dia with countersunk head, comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS 1367 : Part 1 to 14, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame, sash & mullion (if required) shall be mitred cut and fusion welded/mechanically jointed duly sealed at all corners, including drilling of holes for fixing hardware and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of approved size and quality, all complete as per approved drawing conforming to CPWD specification & direction of Engineer-in-Charge. Section of steel reinforcement and cross sections of uPVC profiles to be as per design approved by Engineer-in-Charge. Two track two panels sliding window with Aluminium channel for roller track, wool pile, nylon rollers with SS 304 body. | ||||||
| 1.01 | Using R2 series with frame (40 mm & above) x (40 mm & above) & sash (25 mm & above) x (50 mm & above) with zinc alloy (zamak) powder coated touch locks with hook (Height upto 1.2 metre). | - | sqm | - | - | BI01010001010000000000000515BI0100001113 |
| 1.02 | Casement door single panel with zinc alloy (zamak) 3D hinges, multi-point locking system with cylinder, zinc alloy (zamak) powder coated handles on both sides. Using R3 series with frame (55 mm & above) x (50 mm & above) & sash (55 mm & above) x (85 mm & above) (Height upto 2.5 metre). | - | sqm | - | - | BI01010001010000000000000515BI0100001114 |
| 2Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. | ||||||
| 2.01 | 110 mm diameter | - | metre | - | - | BI01010001010000000000000515BI0100001116 |
| 3Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS: 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Bend 87.5° | ||||||
| 3.01 | 110 mm bend | - | each | - | - | BI01010001010000000000000515BI0100001118 |
| 4Providing and fixing precoated galvanised steel sheet roofing accessories of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05 mm) with Zinc coating 120 gram per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : | ||||||
| 4.01 | Ridges plain (500 - 600mm) | - | metre | - | - | BI01010001010000000000000515BI0100001120 |
| 5Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead : | ||||||
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.24 MB
TenderDocuent.pdf
Tender Documents • 3.48 MB
BOQ_24014.xls
BOQ • 0.35 MB
Download all tender documents and submit your bid