SPECIAL REPAIR TO 150 NOS BUILT IN LOCKERS OF ORS LIVING ACCN AND SPECIAL REPAIR TO BUILT IN CUPBOARD IN JCOS/ORS MD ACCN UNDER AGE B/R- III OF GE(S) JAIPUR AT JAIPUR MIL STN

Amount

M&L for replacement of u/s parts of built in steel cub board fitted in OR line by providing material like looking mirror ,stainless steel locker handles cloth hanging Rod and godrej lockers lock and key including making it complete serviceable by providing welding of any broken hinges and replacement of any part of lockers ie replacement of MS locker shutters etc and complete removal of existing treatment (Paint) and applying 2 coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engr in chage as shown in drg No TD/2004/71(R) dt 16.07.2005 sheet No 1/2 & 2/2 enclosed.

5mm thick mirror 300x375mm size fitted with 20 gauge sheet frame fixed to shutters with screws 14/SR/2021-22- 100 18/SR/2021-22- 100

100 mm long Rim latch with two levers, of mild steel body. stove enamelled finish; with brass knob or lever handle and fixed in repair 14/SR/2021-22- 60 18/SR/2021-22- 60

20 mm dia chromium plated MS Cloth hanging rod fitted in steel lockers inside 14/SR/2021-22- 80 18/SR/2021-22- 80

Mortice lock 2 levers including key 14/SR/2021-22- 90 18/SR/2021-22- 90

Welding in repairs n. exc 2.5cm in length of any broken hinges n exc 6mm thick metal to be welded 14/SR/2021-22- 70 18/SR/2021-22- 70

M & L for preparation and applying two coat of synthetic enamel paint on steel surfaces over 10cm width or girth 14/SR/2021-22- 500 18/SR/2021-22- 500

MS Shutters of 1mm thick MS Steel sheet fixed in repair including taking down old unserviciable shutters 14/SR/2021-22- 50 18/SR/2021-22- 50

75mm long MS hinge 14/SR/2021-22- 50 18/SR/2021-22- 50

Supply and fixing in repair of New built in steel cub boards made out with 1.0 mm thick MS sheet in OR line lockers of dimension 0.53m X0.6 X1.5 M of single leaf door shutter and one looking mirror of size 0.42 x .35m and bottom drawer of 0.56m x 0.27mx 0.2 m fitted at bottom of cub board, including two handles one locker lock and key and 2 cloth hanging rods including applying two coats of syntetic enamel paint over a coat of red oxide primer complete all as specified in PS clause 15.00 on page No 84 and shown in Drg No TD/2004/71 (R) dt 16.07.2005 sheet 1/2, 2/2 enclosd. Note -(i) The unit rate quoted by the contractor shall be deemed including all other details which are shown in drg but not mentioed in BOQ & specifications. (ii) The unit rate shall be for replacement of old cup board/locker and providing new looker as shown in drgs. No extra claim whatsover by entertained by department. 14/SR/2021-22- 55 18/SR/2021-22- 55

19/SR/2021-22 Taking down Chowkhats or frames exc 1.5 sq. m but n exc 4 sq. m each with shutters (without taking off shutters from the frame)

S & F 1m thick Mild steel, plain, black sheet in, steel shutters and similar work, cut to size and shape, holes punched; including round headed screws, hinges, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required

S & F 105x60mm size Pressed steel frames 1.25 mm thick for cup board with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed

S & F 100mm long Mortice latch with two levers (vertical type), mild steel body complete all as specified and directed by engineer in charge

M & L for preperation of new steel surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by engineer in charge

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons or plateforms etc.

S & F Machine cut kota stone slab 20-25mm thick shelves of cupboard laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed by engineer in charge

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations

Taking down cement plaster of any description from wall/ceiling.

Rendering 15 mm thick on fair faces of brick work or concrete surfaces of walls in CM 1:4

Rendering 10 mm thick on fair faces of brick work or concrete surfaces of ceiling in CM 1:3

M & L for preperation of new plastered surfaces of wall and applying two coats of oil bound distemper over a coat of 1mm thick birla wall care putty complete all as specified and directed by engineer in charge

M & L for preperation of new plastered surfaces of ceiling and applying two coats of oil bound distemper over a coat of 1mm thick birla wall care putty complete all as specified and directed by engineer in charge

S & F in repairs 20mm dia 1.2 m long Curtain rod/drapery rod, mild steel, chromium plated including providing brackets, stops of suitable size etc.

M & L for preperation of old steel surfaces over 10cm width or girth and applying two coats of synthetic enamel paint on steel surfaces complete all as specified and directed by engineer in charge

S & F in repairs 100 mm long Mortice latch with two levers (vertical type), mild steel body

M & L for complete removal of existing treatement from old decorated surface of wall and applying two coats of oil bound distemper over a coat of 1mm thick birla wall care putty complete all as specified and directed by engineer in charge

As per item No 19 ditto but on ceiling.

Taking down and refixing Chowkhats or frames exc 1.5 sq. m but n exc 4 sq. m each with shutters (Without taking off shutters from frame) in same opening after carrying out certain repairs such as dents, bends etc complete all as directed by Engineer in Charge.

S.R.Enterprises

M/s Bhavesh Construction Company

M/S TRADE LINKERS

M/S JALANDRA CONSTRUCTIONS

ABHI CONSTRUCTIONS