REPAIR TO CERTAIN STEEL AND WOODEN FURNITURE UNDER GE JUTOGH

Amount

POLISHING OF WOODEN FURNITURE:- M & L For preparation of old wooden polished surfaces with suitable sand paper / emery paper, well dusted and cleaning the surfaces, filling holes with putty and applying french polish (in one or more coats) of superior quality to achieve uniform smooth texture and high glossy finish complete all as specified & as directed, for the following wooden furniture items :-

Chair Dining FD-228/279

Chair Writing FD-229/280/228

Chair Easy FD-229/357

Hat stand with mirror FD-223/362

Peg table FD-277/384

Table bed side FD-248/276/278

Table writing/ Table writing Medium FD-275/249/151

Teapoy FD-237/278/387

Table centre FD-235/274/375

Table Dining (120cmx90cm) FD/Map-II/03

Sofa set to seat five persons FD/Map-II/02

REPAIRS/RECANING OF WOODEN CHAIRS Removing old unserviceable plastic cane form wooden chair and providing new white colour plastic cane 2mm to 2.5mm wide, 0.40mm thick for weaving in godrej pattern and 4mm wide plastic cane of 0.60mm thick for border work complete all as directed and as shown on drg,for the following type of chairs :

Chair Writing (Seat) FD-261/ 280

Chair Easy (Seat & Back) FD-229

Chair dining (Seat) FD-279/ 228

Chair dining (Seat) M&L for removing old unserviceable plastic seat and supplying and fixing new plastic seat by means of adequate steel screw and all as directed by Engr-in-charge and as shown on drg . FD/Map-II/05

M&L for removing unserviceable broken rear legs and supply and fix new rear legs made out of 1st class hard wood teak suitable for existing chairs of following description all as directed by Engr-in-Charge and shown on drg.

Chair Writing FD-261/ 280

Chair Easy FD-229

Chair dining FD-228/279

Chair dining FD/Map-II/05

M&L for removing unserviceable broken front legs and supply and fix new front legs made out of 1st class hard wood teak suitable for existing chairs of following description complete all as specified and directed and shown on drg.

Chair Writing FD-261/ 280

Chair Easy FD-229

Chair dining FD-228/279

Chair Dining FD/Map-II/05

Removing unserviceable broken side/front/back wooden member of chairs and supply and fix new side/front/back wooden member made out of 1st class hard wood with 3mm dia holes at a spacing of 10mm to 12.5mm center to center along the length of member for canning, suitable for existing chairs complete all as directed and as shown on drg for following type of chairs :

Chair Writing FD-261/ 280

Chair Easy FD-229

Chair dining FD-228/279

Chair Dining FD/Map-II/05

Removing unserviceable broken arms rest left or right of chair and supply and fix new arms rest left or right made out of 1st class hard wood of existing shape and size complete all as directed and as shown on drg, for the following type of chairs :

Chair Writing FD-261/ 280

Chair Easy FD-229

Removing unserviceable broken bottom stiffener (center or side) and supply and fix new bottom stiffener (center or side) made out of 1st class hard wood complete all as directed and as shown on drg, for the following type of chairs :

Chair Writing FD-261/ 280

Chair dining FD-228/279

Chair Dining FD/Map-II/05

Preparation of wooden surfaces new or old (of repaired chairs) by scraping with sand paper, redusting and applying putty where required and polishing the surface with french polish to get glossy finish (with one or more coats) complete all as directed and as shown on drg, for the following type of chairs :

Chair Writing FD-261/ 280

Chair Easy FD-229

Chair dining FD-228/279

Chair Dining FD/Map-II/05

Repair of Chair Varandah Removing broken/ unserviceable cane (both seat & back) and Recanning the same with best quality plastic cane 4mm wide and 0.60 mm thick of approved make after cleaning thoroughly all the surfaces of chair incl required welding work for broken frame where required and re-dusting and applying one coat of synthetic enamel paint over a coat of red oxide primer of approved shade. FD-256/259/359

REPAIRS / PAINTING OF STEEL ALMIRAH & STEEL LOCKER Preparation of old steel surfaces by scraping with emery paper, cleaning, re-dusting, making the surfaces smooth and apply putty where required and applying one coat of synthetic enamel paint (olive green) of inside and out side of almirah large steel with shelves complete all as specified and as directed.

All as per Srl Item No 10.00 above but Almirah Large steel with shelves FD-1031

All as per Srl Item No 10.00 above but Almirah medium steel with shelves FD-1032

Removing old unserviceable locks from Almirah large/Almirah medium steel/ Almirah large steel 1/2 HX1/2 S , Almirah medium 1/2 H x 1/2 S and S & F new 6 lever lock with duplicate key (2 Nos of key) of approved quality of existing size fixed with screw/ welding to shutter of almirah all as specified and directed. FD-114/1031/ 1032/1033&1034

Removing old unserviceable lock Assembly with 6mm thick bars round from Almirah large steel/Almirah medium steel /Almirah large steel 1/2HX1/2S/Almirah medium steel 1/2HX 1/2S and supply and fix new lock assembly with 6mm round bars and lock plate with necessary fittings of approved quality all as specified and directed. FD-114/1031/ 1032/1033&1034

Removing old unserviceable broken handles from Almirah large steel /Almirah medium steel /Almirah large steel 1/2HX1/2S/Almirah medium steel 1/2HX 1/2S and supply and fix new handle with necessary fittings of approved quality all as specified and directed. FD-114/1031/ 1032/1033&1034

Removing the existing dented shelves from Almirah steel large/Almirah medium steel /Almirah large steel 1/2HX1/2S/Almirah medium steel 1/2HX 1/2S bringing the item to the original shape and re-fixing the shelves with necessary cleats/nuts/bolts all as specified and directed. FD-114/1031/ 1032/1033&1034

Removing the existing unserviceable legs from Almirah steel large /Almirah medium steel /Almirah large steel 1/2HX1/2S/Almirah medium steel 1/2HX 1/2S and supply and fixing the new legs made out of 1mm thick CRCA sheet and fixed with welding/riveting as per existing size and duly painted with two coats of synthetic enamel paint (Olive Green) over one coat of red oxide zinc chrome primer complete all as specified and directed.FD-114/1031/ 1032/1033&1034

Chair CB Steel with Arms : Removing unserviceable seat from chair CB steel with arms and S & F new seat made of 2nd class hard wood canned with 2mm wide and 0.3mm thick plastic cane white colour and 4mm wide 0.4mm thick plastic cane for border incl black polishing to the wooden frame and fixing with 4 Nos GI Nuts and bolts of size 3/16"X3" long with two washers on either side of the seat, complete all as specified and as directed.FD 75 (M)

M & L for removing unserviceable back from chair CB steel with arms and S & F new back made out of 2nd class hard wood and canned with 2mm wide and 0.3mm thick plastic cane white colour and 4mm wide 0.4mm thick plastic cane for all round the border incl black polishing to the wooden frame and fixing to the same with 4 Nos GI Nut and bolts of size 3/16"X3" long with two washers on either side of the seat, and all as specified and as directed.FD 75 (M)

M & L for removing unserviceable/broken arms from chair CB steel with arms and S & F new arms made out of first class teak wood and handle shall be black polished and fixed to the chairs CB steel with arms with suitable wooden screws, and all as specified and as directed.FD 75 (M)

M & L for preparation of steel surfaces by emery paper to Chair CB steel with arms and applying one coat of synthetic enamel paint olive green shade approved quality over a coat of red oxide primer and all as shown on Drg. And as directed.FD 75 (M)

REPAIRS TO BED PLYWOOD TOP: M & L for removing unserviceable / broken leg from bed plywood top and S & F new leg made out of 1st class teak wood and made to shape and all as shown on drg and as directed.FD-247&FD-246

M & L for removing unserviceable plywood from both side of Head board of Bed plywood top and S & F new 4mm thick plywood one side teak face (Natural teak) to both side of Head board including 15mm wide 6mm thick teak wood round beading providing for both side of head board and 35mm wide 4mm thick teak wood beading for top of head board and all as specified and as directed.FD-247&FD-246

M & L for removing unserviceable plywood from both side of Foot board of Bed plywood top and S & F new 4mm thick plywood one side teak face ( Natural teak) to both side of Foot board incl 15mm wide 6mm thick teak wood beading providing both side of Foot board and 35mm wide 4mm thick teak wood beading for top of the head board and all as specified and as directed. FD-247& FD-246

Removing unserviceable long rail from Bed plywood top and S & F new long rail made out of 1st class hard wood made to shape complete all as specified and as directed. FD-247, 246

Removing unserviceable center rail from Bed plywood top and S & F new cener rail made out of 1st class hard wood made to shape complete all as specified and as directed.FD-247, 246

Removing old unserviceable/ worn out existing plywood top from Bed plywood top and S & F new 12mm thick plywood BWR grade Type BB commercial 7 Ply of size 1940 X 915mm of approved make and fixing with minimum 18 Nos 30mm brass screw for each bed complete all as specified and as directed. FD-247, 246

M & L for polishing of bed plywood top with french polish for obtaining glossy finish incl preparation of wooden surfaces by scrapping with sand paper & apply putty where ever required complete all as specified and directed. FD-247, 246

REPAIR OF WOODEN TABLES: Removing unserviceable/ broken table top and S & F new table top made of 18mm thick pre-laminated particle board exterior Grade ( Natural teak finish) with 4mm thick teak wood beading all around the top, complete all as specified and directed, suitable for following type of tables :

Table 3' x 2' with drawer/ without drawer FD-224/283

Table dining 6 persons FD-273/274

Table CentreFD-235/274/375

Teapoy FD-237/387/278

Table peg FD-277/384/236

Table 3'X3' FD-88/291

Table writing FD-275

REPAIR OF DRESSING MIRROR GENTS (FD/MAP-II/16):Removing unserviceable / broken Mirror from dressing mirror gents and S & F the glass 5 to 5.5 mm thick well-polished, uniformly silver plated with red led paint in the back,free from silvering defects complete all as specified and shown on drawing. (FD/Map-II/16)

Removing unserviceable glass shelves from dressing mirror gents and S&F glass shelves in dressing mirror Gents of approx size 580mm long x 90mm wide x5mm thick of approved quality complete all as specified and shown on drawing. (FD/Map-II/16)

Polishing of dressing mirror gents with french polish for obtaining glossy finish incl preparation of wooden surfaces by scrapping with sand paper & apply putty where ever required complete all as specified and directed. (FD/Map-II/16)

REPAIR OF SCHOOL CHAIR WITH HARD BOARD (FD/E6/MAP/05): Removing unserviceable PVC seat from school chair and S&F PVC 4mm thick in single piece seat and back weight not less than 1.2 kgs each with adequate nos of steel screw, complete all as specified and shown on drawing. FD/E6/Map/05

Removing unserviceable hand board from chair school and S&F pre-laminated particle board of exterior grade of approved shade with standard size of PVC edging all around of minimum thickness 1.6mm thick fixed with hot glue complete all as specified and shownon drawing. FD/E6/Map/05

SOFA SET CUSHOIN: Removing old unserviceable/ worn out cushion and tapestry cloth form sofa set 5 seater ( Set of 10 pieces) and supply of new cushion of size 21" X 22" X 4" thick foam with 40 density as approved by GE, covered with tapestry cloth of approved shade &quality over lining cloth duly covered and stiched complete all as specified and shownon drawing. Note : Cost of the tapestry cloth shall not be less than Rs. 250/- per meter. FD-281/ FD/Map-II/02

REPAIRS / PAINTING OF Charpoy IP Hard top (FD/Map-II/01) Preparation of old steel surfaces by scraping with emery paper, cleaning, re-dusting, making the surfaces smooth and apply putty where required and applying one coat of synthetic enamel paint (black paint) of Charpoy IP hard top including welding wherever necessary complete all as specified and as directed. FD/Map-II/01

Removing old unserviceable/ worn out existing plywood top from Charpoy IP hard top and S & F new 12mm thick plywood BWR grade Type BB commercial 7 Ply of size 1930x850mm of approved make and fixing with minimum 12Nos of 8x30mm screw for each bed complete all as specified and as directed. FD/Map-II/01

Modern Enterprises

B S FURNITURE