Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹46.4 LAccepted-AOC H NO 547 MAHADEV CIRCLE INDIRA COLONY JAISALMER RAJASTHAN 345001 | JAISALMER | JAISALMER | RAJASTHAN | 345001 | L1 | Accepted-AOC Lowest rate quoted by bidder | |
| 2 | L2₹49.1 L+₹2.5 L (5.37%)Rejected-Finance 1286 TOTA RAM KI DHANI JAISALMER RAJ 345001 | JAISALMER | JAISALMER | RAJASTHAN | 345001 | L2 | Rejected-Finance Higher rate quoted by bidder | |
| 3 | L3₹54.2 L+₹7.7 L (16.5%)Rejected-Finance VILL JASSAI DISTRICT BARMER RAJ 344001 | JASSAI | BARMER | RAJASTHAN | 344001 | L3 | Rejected-Finance Highest rate quoted by bidder |
Tender Value
₹50 L
EMD Value
₹1 L
Closing Date
7 Nov 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE AF JAISALMER
HQ CWE AF JAISALMER
REPAIRS TO ROADS AND ROAD BERMS IN TECHNICAL AREA AT AF STN JAISALMER
2022_MES_544916_3
80202/E8
Open Tender
Civil Works
Item Rate
180 days
GE AF JAISALMER
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
GE AF JAISALMER
₹1 L
Yes
19 Nov 2022
17 Oct 2022
9 Nov 2022
17 Oct 2022
7 Nov 2022
24 Oct 2022
Amount
Surface excavation in any type of soil n.exc 30cm deep and averaging 15cm deep and getting out complete all as specified and as directed.
Excavating over area in hard/dense soil not exceeding 1.5m deep for foundation etc or for shafts, wells, cesspits , manholes, pier holes etc n exc 10 Sqm on plan and n exc 1.5m in depth and getting out etc complete all as specified and as directed.
Removing excavated materials to a distance not exc. 50m and depositing where directed at a level n. exc. 1.5m above the starting point etc complete all as specified and as directed.
Demolition of brickwork or stone/boulder masonry, built in cement mortor including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stone work and precast concrete articles ( road side kerb stones) etc complete all as specified and as directed.
Repair to potholes any depth, not exc 1 sq m each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth, making good by filling in screened & graded road metal, watering and well ramming (including supply of road metal) complete all as specified and as directed. Note:- This item shall be applicable in existing road to be provided with SDAC.
Labour only (except material) for forming road side berms of 100mm spread thickness with available approved soil/moorum obtained from within MD land as directed by GE; spread, level, watering, rolled and consolidated to gradient and camber required using with 8 to 12 tonne power roller etc complete all as specified and as directed. Note :- 1. Approved soil/moorum shall be obtained from within MD land as directed by GE. 2. No lead charges/cartage charges or charges of whatsoever nature shall be paid on this account.
M&L for 200mm thick (compacted thickness) GSB in two layers each of 100mm thickness, soling (or sub base), with coarse aggregate of shingle or gravel stone of grading 3 (50 to 20mm size) spread,rolled and consolidated to gradient and camber required with 8 to 12 tonne power roller complete all as specified and as directed. Note:- Thickness measured shall be compacted. 200mm compacted thickness consisting of two layers each of 100mm compacted thickness shall be considered for measurement and payment.
M&L for 15cm thick (compacted thickness) WBM, in two layers each of 7.5cm thickness with coarse aggregate of sand stone, flint or quartize of grading 2 (63 to 40mm size), blinded with stone screening materals type "A", spread, rolled and consolidated to gradient and camber required with 8 to 12 tonne power roller complete all as specified and as directed.Note:- Thickness measured shall be compacted. 150mm compacted thickness consisting of two layers each of 75mm compacted thickness shall be considered for measurement and payment.
M&L for preparing unsurfaced WBM surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags or Air compressor to remove all loose dirt etc and applying evenly a priming/tack coat with bituminous primer of grade VG10 at the rate of 10 Kg per 10sqm on unsurfaced WBM surfaces etc complete all as specified and as directed.
M&L for preparing existing black top surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags or Air compressor to remove all loose dirt etc and applying evenly a priming/tack coat with bituminous primer of grade VG10 at the rate of 5 Kg per 10sqm on unsurfaced WBM surfaces etc complete all as specified and as directed.
M&L for 40mm consolidated thickness Bituminous Premix Semi Dense Asphaltic Concrete (SDAC) using paving bitumen VG-30 with 5.5 % binder by weight of total mix Rolled and compacted to required camber and gradient complete with 8 to 12 tonne power roller complete all as specified and directed. Note :- (i) In case the binder contents by weight of total mix is less than 5.5% as per actual design mix, the price adjustment shall be made as per average rates of all paid voucher for bitumen pertaining to this work. If the total binder contents as per design mix is more than 5.5%, no price adjustment shall be made for the same. (ii) Job mix formula for Semi dense asphaltic concrete shall be obtained from the institutions specified in CA prior to commencement of work and shall be got approved from the GE.
M&L for 30mm consolidated thickness Bituminous Premix Semi Dense Asphaltic Concrete (SDAC) using paving bitumen VG-30 with 5.5 % binder by weight of total mix Rolled and compacted to required camber and gradient complete with 8 to 12 tonne power roller complete all as specified and directed. Note :- (i) In case the binder contents by weight of total mix is less than 5.5% as per actual design mix, the price adjustment shall be made as per average rates of all paid voucher for bitumen pertaining to this work. If the total binder contents as per design mix is more than 5.5%, no price adjustment shall be made for the same. (ii) Job Mix Formula for Semi dense asphaltic concrete shall be obtained from the institutions specified in CA prior to commencement of work and shall be got approved by the GE.
M&L for preparing bituminous surfaces of road and marking 2.5mm thick centre lines, stops lines, dashes, arrows, etc and the like not exceeding 10cm wide on roads pavements with hot applied thermo platic road marking paint of approved colour conforming to BS 3262-1989 with special applicator machine all as per manufacturer's instructions etc complete all as specified and directed.
M&L for preparation of new surfaces of concrete as in road side kerbs and applying two coats of synthethic enamel paint of approved different tints and pattern (approved by GE) over a coat of primer paints plaster coat complete all as specified and directed.
M&L for plain cement concrete (1:4:8) type D-2 using 40 mm graded stone aggregate as in foundations, filling and mass concrete.
M&L for Factory made Pre-cast cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate as in road side kerb stones and the like including moulds and formwork, with plain fair and smooth finished fair faces, weathering, slightly rounded or chamfered angles and throating; laid, set and jointed in cement mortar (1:6) complete all as specified and directed.
S&F solar cat eye reflective type of metal body alloy of of size 100mm x 100mm x 20mm with PMMA striplens reflector of Model DA 972.0 fixed with and including mild steel stud of suitable size as per manufacturer's instructions etc. all as specified and directed
S&F metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC (1:2:4) type B1(150mmx150mmx300mm) complete all as specified and directed.
GEMRARAMCONTRACTOR
m/s jogaram sujaram
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .