Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹25.9 LAccepted-AOC ATR MAIN ROAD GARACHARMA II OPP MAHINDRA JADWET SHOWROOM SRI VIJAYA PURAM 744105 | SRI VIJAYA PURAM | SOUTH ANDAMANS | ANDAMAN AND NICOBAR ISLANDS | 744105 | ₹25.9 L Quoted ₹26.1 L | L1 | Accepted-AOC LOWEST BIDDER |
| 2 | L2₹27.5 L+₹1.5 L (5.64%)Rejected-Finance NEAR PLAY GROUND BIRDLINE CALICUT POST PORT BLAIR 744105 | SOUTH ANDAMANS | ANDAMAN AND NICOBAR ISLANDS | 744105 | ₹27.5 L+₹1.5 L (5.64%) | L2 | Rejected-Finance NOT BEING LOWEST BIDDER |
| 3 | L3₹27.8 L+₹1.7 L (6.56%)Rejected-Finance | ₹27.8 L+₹1.7 L (6.56%) | L3 | Rejected-Finance NOT BEING LOWEST BIDDER |
| 4 | L4₹27.9 L+₹1.8 L (6.89%)Rejected-Finance 018 GROUND FLOOR LEKHRAJ ENCLAVE LEKHRAJ PANNA SECTOR 2 VIKAS NAGAR LUCKNOW UTTAR PRADESH 226022 | LUCKNOW | UTTAR PRADESH | 226022 | ₹27.9 L+₹1.8 L (6.89%) | L4 | Rejected-Finance NOT BEING LOWEST BIDDER |
| 5 | L5₹28.5 L+₹2.5 L (9.50%)Rejected-Finance BRICHGUNI CHOWK PROTHRAPUR SOUTH ANDAMAN SRI VIJAYA PURAM 744103 | SRI VIJAYA PURAM | SOUTH ANDAMAN | ANDAMAN AND NICOBAR ISLANDS | 744103 | ₹28.5 L+₹2.5 L (9.50%) | L5 | Rejected-Finance NOT BEING LOWEST BIDDER |
| Sl No | Description | Qty | Unit | RPG AND COMPANY L1 | M/s Saina Enterprises L2 | M/s Gurunath Construction L6 | M/s Kamal Electrical L3 | RS ENGINEERING WORK L7 | DEEPAK AGENCIES L8 | SIMONS CONSTRUCTION L5 | SK ENTERPRISES L4 |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Dismantling boarding, any description, fixed in any position with nails complete all as specified and as directed. | 109.8 | Sqm | 40 ₹4,392 Lowest | 55 ₹6,039 | 48 ₹5,270.4 | 60 ₹6,588 | 50 ₹5,490 | 44 ₹4,831.2 | 40 ₹4,392 Lowest | 70 ₹7,686 |
| 2.00 | S&F Powder Coated ( minimum thickness of Powder coating 50 Microns) aluminium frame for doors, Windows, Ventilators, Cupboards with one or more rebates including joining cleat for fixing etc., complete all as specified and as directed. | 306.15 | Kg | 1,000 ₹3,06,150 Lowest | 1,050 ₹3,21,457.5 | 1,250 ₹3,82,687.5 | 1,058 ₹3,23,906.7 | 1,110 ₹3,39,826.5 | 1,180 ₹3,61,257 | 1,087 ₹3,32,785.05 | 1,000 ₹3,06,150 Lowest |
| 3.00 | S &F Powder Coated ( minimum thickness of Powder coating 50 Microns) aluminium door shutters, Cupboards aluminium section weighing minimum 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handle 2 Nos in each door, hinges, anodised aluminium snap beading screws etc., complete all as specified and as directed by Engr-in-Charge | 85.5 | Sqm | 4,600 ₹3,93,300 Lowest | 4,950 ₹4,23,225 | 5,000 ₹4,27,500 | 4,866 ₹4,16,043 | 5,100 ₹4,36,050 | 5,200 ₹4,44,600 | 4,999 ₹4,27,414.5 | 5,100 ₹4,36,050 |
| 4.00 | S &F Powder Coated ( minimum thickness of Powder coating 50 Microns) aluminium window and ventilator shutters, fixed/ sliding type without sash bar, aluminium section weighing minimum 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading screws etc., complete all as specified and directed by Engr-in-Charge | 8.63 | Sqm | 4,600 ₹39,698 Lowest | 4,950 ₹42,718.5 | 5,000 ₹43,150 | 4,866 ₹41,993.58 | 5,100 ₹44,013 | 5,200 ₹44,876 | 4,999 ₹43,141.37 | 5,100 ₹44,013 |
| 5.00 | S &F Powder Coated ( minimum thickness of Powder coating 50 Microns) aluminium window and ventilator shutters, Side hung type without sash, aluminium section weighing minimum 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading screws, anodised aluminium fittings such as peg stays 150mm long (01 No), hinges type B-21 100mm long (02 Nos) suitable handle (01 No) etc., complete all as specified and as directed by Engr-in-Charge | 17.25 | Sqm | 4,800 ₹82,800 Lowest | 5,000 ₹86,250 | 5,281 ₹91,097.25 | 5,020 ₹86,595 | 5,300 ₹91,425 | 5,432 ₹93,702 | 5,500 ₹94,875 | 5,137 ₹88,613.25 |
| 6.00 | S&F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minium anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with CP brass/stainless steel screws @ 200mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-Charge. | 44.85 | Kgs | 1,050 ₹47,092.5 Lowest | 1,050 ₹47,092.5 Lowest | 1,155 ₹51,801.75 | 1,110 ₹49,783.5 | 1,250 ₹56,062.5 | 1,200 ₹53,820 | 1,150 ₹51,577.5 | 1,124 ₹50,411.4 |
| 7.00 | Supply only 4 mm thick sheet glass ordinary quality and glazing with rubber packing around the glass, in squares not exceeding 0.50 sqm in each pane complete all as specified and as directed by Engineer-in-Charge. | 12 | Sqm | 1,100 ₹13,200 Lowest | 1,190 ₹14,280 | 1,320 ₹15,840 | 1,164 ₹13,968 | 1,228 ₹14,736 | 1,100 ₹13,200 Lowest | 1,195 ₹14,340 | 1,250 ₹15,000 |
| 8.00 | Supply only 4 mm thick sheet figured glass and glazing with rubber packing around the glass, in squares not exceeding 0.50 sqm in each pane complete all as specified and as directed. | 6 | Sqm | 1,100 ₹6,600 Lowest | 1,190 ₹7,140 | 1,320 ₹7,920 | 1,164 ₹6,984 | 1,228 ₹7,368 | 1,100 ₹6,600 Lowest | 1,195 ₹7,170 | 1,250 ₹7,500 |
| 9.00 | Supply only 12 mm thick prelaminated particle board exterior grade both side laminated and fixed to aluminium frame complete all as specified and as directed. | 20 | Sqm | 1,200 ₹24,000 Lowest | 1,350 ₹27,000 | 1,320 ₹26,400 | 1,269 ₹25,380 | 1,300 ₹26,000 | 1,310 ₹26,200 | 1,304 ₹26,080 | 1,250 ₹25,000 |
| 10.00 | Supply only aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium wire staples complete all as specified and as directed. | 40 | Sqm | 950 ₹38,000 Lowest | 950 ₹38,000 Lowest | 1,045 ₹41,800 | 1,150 ₹46,000 | 1,099 ₹43,960 | 1,250 ₹50,000 | 1,250 ₹50,000 | 1,000 ₹40,000 |
Tender Value
₹25 L
EMD Value
₹50,000
Closing Date
8 Aug 2026, 6:00 pmClosed
GE Brichgunj Sri Vijaya Puram
GE Brichgunj Sri Vijaya Puram
REPAIR TO DOORS, WINDOWS, VENTILATORS, WARDROBE,CUPBOARDS, WALL CLADDING AND FALSE CEILING AT ZONE-II UNDER GE BRICHGUNJ, SRI VIJAYA PURAM
2026_MES_774664_1
8798A
Open Tender
Civil Works
Item Rate
180 days
GE Brichgunj Sri Vijaya Puram
AS PER TENDER DOCUMENTS
9 documents required · 9 mandatory
₹500
Yes
₹50,000
Yes
16 Sept 2026
25 Jun 2026
10 Aug 2026
25 Jun 2026
8 Aug 2026
10 Jul 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Dismantling boarding, any description, fixed in any position with nails complete all as specified and as directed. | 109.8 | Sqm | - | - |
| 2 | S&F Powder Coated ( minimum thickness of Powder coating 50 Microns) aluminium frame for doors, Windows, Ventilators, Cupboards with one or more rebates including joining cleat for fixing etc., complete all as specified and as directed. | 306.15 | Kg | - | - |
| 3 | S &F Powder Coated ( minimum thickness of Powder coating 50 Microns) aluminium door shutters, Cupboards aluminium section weighing minimum 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handle 2 Nos in each door, hinges, anodised aluminium snap beading screws etc., complete all as specified and as directed by Engr-in-Charge | 85.5 | Sqm | - | - |
| 4 | S &F Powder Coated ( minimum thickness of Powder coating 50 Microns) aluminium window and ventilator shutters, fixed/ sliding type without sash bar, aluminium section weighing minimum 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading screws etc., complete all as specified and directed by Engr-in-Charge | 8.63 | Sqm | - | - |
| 5 | S &F Powder Coated ( minimum thickness of Powder coating 50 Microns) aluminium window and ventilator shutters, Side hung type without sash, aluminium section weighing minimum 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading screws, anodised aluminium fittings such as peg stays 150mm long (01 No), hinges type B-21 100mm long (02 Nos) suitable handle (01 No) etc., complete all as specified and as directed by Engr-in-Charge | 17.25 | Sqm | - | - |
| 6 | S&F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minium anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with CP brass/stainless steel screws @ 200mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-Charge. | 44.85 | Kgs | - | - |
| 7 | Supply only 4 mm thick sheet glass ordinary quality and glazing with rubber packing around the glass, in squares not exceeding 0.50 sqm in each pane complete all as specified and as directed by Engineer-in-Charge. | 12 | Sqm | - | - |
| 8 | Supply only 4 mm thick sheet figured glass and glazing with rubber packing around the glass, in squares not exceeding 0.50 sqm in each pane complete all as specified and as directed. | 6 | Sqm | - | - |
| 9 | Supply only 12 mm thick prelaminated particle board exterior grade both side laminated and fixed to aluminium frame complete all as specified and as directed. | 20 | Sqm | - | - |
| 10 | Supply only aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium wire staples complete all as specified and as directed. | 40 | Sqm | - | - |
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.67 MB
BOQ_867443.xls
BOQ • 0.35 MB
8798ATENDER.pdf
Tender Documents • 1.64 MB
8798A.pdf
PDF • 0.31 MB
8798DATEAMAND.pdf
PDF • 0.67 MB
8798datecorri.pdf
PDF • 0.61 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .