PROVISION OF MODULAR KITCHEN AT N-30 AND N-02 BUILDINGS AT INS NETAJI SUBHAS KOLKATA UNDER GE (I) (CG N) KOLKATA

Amount

Demolition of cement concrete( unreinforced) in ground floors and paving n exc 15 cm thickness (below or above ground level) complete all as specified and as directed.

Demolition of reinforced cement concrete ( reinforcement cut as required to facilitate demolition ) in Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work complete all as specified and as directed.

M&L for RCC (nominal mix) Type B1 (1:2:4) (20mm graded aggregate) slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like for kithcen slab complete all as specified and as directed.

Use and waste for formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide complete all as specified and as directed.

Used and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work, not exceeding 200mm thick (Horizontal or sloping) complete all as specified and as directed.

M&L for TMT Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc, including removing off rubbish from work site complete all as specified.

M&L for 18-20 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.

M&L for Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and as directed.

Demolition of brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed.

M&L for brick work with sub class 'B' bricks straight or curved in plan exc 6 mtr mean radius built in CM (1:4) using old size bricks complete all as specified and as directed.

Taking down cement plaster on brick or concrete wall/ceiling etc including racking out joint hacking for key, scrubbing down with water etc. complete all as specified and as directed.

M&L for 15mm thick plastering in cement mortar on brick/concrete wall surfaces in CM (1:6) and finishing the surfaces even and smooth without using extra cement complete all as specified and as directed.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M&L for coloured printed glazed ceramic tiles in vertical surface 450 x 350 x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10 mm thick plastering in CM(1:4) brick or on concrete surfaces of wall and finishing the surfaces fair and even without using extra cement all as specified and directed as in backing of tiles complete all as specified and as directed..

S&F Non skid ceramic coloured tiles 7 to 8mm th area of each tile exceeding 0.06sqm but not exc 0.11 sqm in floors etc. set and joined in neat cement slury and pointed in coloured cement to match including screed bed or bedding layer 15 mm thick in CM (1:6) on floors for laying floor finish all as specified and as directed.

Taking up or down 15mm steel tubing and connections including cleaning for re fixing or removal to store all as specified and directed.

Supplying and laying of 20mm bore CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and as directed.

M&L for CPVC Brass fittings like Brass elbow / Tee / Sockets / Reducing sockets / MBTA / FBTA / Union / Adaptor etc. suitable for fixing with steel pipe 20 mm dia CPVC pipe fixed in wall / floor complete all as specified and directed.

S&F in repairs sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed.

S&F stainless steel kitchen rack of size 750mm x 600mm x 300mm with 2 shelf, made out of 0.8 mm thick sheet fixed with suitable size cromium plated screws including taking out old one complete all as specified and as directed.

S&F 15 mm bib tap, cast copper alloy fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule including taking down old one complete all as specified and as directed.

S&F 15mm dia swan neck cast copper alloy fancy tupe chromium plated with screwed down, high pressure screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixedcomplete all as specified and directed.

S&F 100mm Cast iron floor trap , with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) including taking out old one complete all as specified and as directed.

S&F 15mm dia angular stop valves, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed concealed type complete all as specified and as directed.

Dismantling boarding,of any description, fixed in any position with nails complete all as specified and as directed.

Taking up or down 25mm dia steel tubing and connections including cleaning for re fixing or removal to store complete all as specified and as directed.

S&F 25mm dia Medium grade GI Tubing ,with all fitting and fixed complete to walls and ceilings or laid in floors all as specified and directed.

S&F in repair cast iron (sand cast) soil, waste and vent pipe 100 mm bore in any length, with or without ears, with cement joints, fixed with stack clamps out of 25x5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed including taking down old pipe upto 4th storey incl taking out old one

S&F in repair 100 mm dia CI branch piece single, (equal or unequal) ordinary or inverted spigot or socketed type with oval access doors all as specified and directed including taking down old one.

S&F in repair cast iron bends 100mm bore of pipe (any radius ) with ducks foot or heel rest all as specified.

Supply & Installation for "L TYPE" Semi Modular Kitchen along with all fittings as specified and as directed by Engr-in-charge Note: Quoted Rate is inclusive of all items mentioned below from sl no 33 to 43

a)Wall Cabinet ( 600mm * 300mm * 800) Material 18mm BWR Plywood with all side white laminate

b) Shutter wall Cabinet (300mm * 800mm) Laminate on BWR Plywood any colour 2 shutter, 600mm G profile handels and 2 pair Hettich soft close hinges.

c)Wall Cabinet ( 600m mm * 300mm * 800) Material 18mm BWR Plywood with all side white laminate.

d)Shutter wall Cabinet (300mm * 800mm ) Laminate on BWR Plywood any colour 2 shutter, 600mm G profile handels and 2 pair Hettich soft close hinges.

e)Base Sink Cabinet (750mm * 730mm ) Laminate on BWR Plywood 2 shutter on 18mm white Laminate on BWR Plywood 750mm G profile Handle, with 2 pair hinges. With SS Detargent Rack & SS Waste Bin holder.

f)Base Corner Shutter (450mm * 735mm ) Laminate on BWR Plywod 2 shutter With 1 shelf (900mm * 580mm ) on 18mm white Laminate on BWR Plywood 900mm G profile Handle, with 2 pair hinges &(2400mm * 70mm ) Framing on BWR Plywood.

g)Base Cabinet (690mm * 730mm ) Laminate on BWR Plywood 2 shutter With 1 shelf (690mm * 580mm ) on 18mm white Laminate on BWR Plywood 690mm G profile Handle, with 2 pair hinges & (2100mm* 70mm ) Framing on BWR Plywood.

h)Set up for Hettich Make 3 drawers (600mm * 730mm) Laminate on BWR Plywood with 2 Partition on 18mm White laminate on BWR Plywood, 3 base & back, G-Profile handle 1 Hettich PVC cutlery, 1 Plain Drawer & 1 ss Plain Drawer with thali Organizer required channel

i)Set up for Narrow pull out drawer (200mm * 730mm ) on BWR Plywood with 2 partition on 18mm White laminate on BWR Plywood, 200mm G Profiler Handle Hettich layered spice pullout

j)Base Cylinder unit Shutter (440mm * 730mm ) Laminate on BWR Plywood 440mm G profile Handle, with 1 pair Hettich soft close hinges & (2100mm * 70mm ) Framing on BWR Plywood.

Supply & Installation for Chimney Dezire 60 alomh with all fittings of following specification to be provided: a)Voltage: AC 220-240 V b) Motor Power: 1 X 240 W c) Illumination Type: LED Lamp d)Auto Clean Type: Dry, Intelligent Auto Clean e)Suction: 1500 plus/minus 50 m3 / Hr f)Noise Level: 58 DB g)Switch Control: Touch Control with wave Sensor h)Unit Dimension: L600 x W500 x H570 Note: Fixing of 6 inch aluminium duct pipe is nearest to the open area and also quoted rate is including of cutting wall of proper size and make good as per existing complete all as specified and as directed

Supply & Installation for HOB TOP: Turbo 378 along with all fittings of following specification to be provided: a)Burner:Brass Burner b) Burner Power (KW): 2.5kwx 2 , 1.5Wx1 c) Gas Type: LPG d)Ignition (Battery 1.5v): Yes e)Glass: 8mm Tempered Glass f)Unit Dimension: 780 x 450 x 135

Supply & Installation for "PARALLEL TYPE" Semi Modular Kitchen along with all fittings as specified and as directed by Engr-in-charge Note: Quoted Rate is inclusive of all items mentioned below from sl no 46 to 83

a)Wall Cabinet ( 700mm x 300mm x 600) Material 18mm BWR Plywood with all side white laminate.

b)Shutter wall Cabinet (700mm x 300mm ) Laminate on BWR Plywood any colour 2 shutter, 700mm G profile handels and 2 pair Hettich soft close hinges, no Ebco Prolifts

c)Wall Cabinet ( 700mm x 300mm x 600) Material 18mm BWR Plywood with all side white laminate.

d)Shutter wall Cabinet (350mm x 600mm ) Hafele Profins shutter any colour 2 shutter, 120mm profin handels and 2 pair Hettich soft close hinges.

e)Wall Cabinet ( 700mm x 300mm x 600) Material 18mm BWR Plywood with all side white laminate.

f)Shutter wall Cabinet (700mm * 300mm ) Laminate on BWR Plywood any colour 2 shutter, 700mm G profile handels and 2 pair Hettich soft close hinges, no Ebco Prolifts

g)Wall Cabinet ( 670mm x 300mm x 600) Material 18mm BWR Plywood with all side white laminate.

h)Shutter wall Cabinet (335mm x 600mm ) Laminate on BWR Plywood any colour 2 shutter, 670mm G profile handels and 2 pair Hettich soft close hinges.

i)Wall Cabinet ( 670mm x 300mm x 600) Material 18mm BWR Plywood with all side white laminate.

j)Shutter wall Cabinet (335mm * 600mm ) Laminate on BWR Plywood any colour 2 shutter, 670mm G profile handels and 2 pair Hettich soft close hinges.

k)Wall Cabinet ( 1120mm x 300mm x 600) Material 18mm BWR Plywood with all side white laminate.

l)Shutter wall Cabinet (560mm x 600mm ) Laminate on BWR Plywood any colour 2 shutter, 1120mm G profile handels and 2 pair Hettich soft close hinges.

m)Loft Cabinet ( 700mm x 300mm x 800) Material 18mm BWR Plywood with all side white laminate.

n)Shutter wall Cabinet (350mm x 600mm ) Laminate on BWR Plywood any colour 2 shutter, 700mm G profile handels and 2 pair Hettich soft close hinges.

o)Loft Cabinet ( 700mm x 300mm x 800) Material 18mm BWR Plywood with all side white laminate.

p)Shutter wall Cabinet (350mm x 600mm ) Laminate on BWR Plywood any colour 2 shutter, 700mm G profile handels and 2 pair Hettich soft close hinges.

q)Loft Cabinet ( 700mm x 300mm x 800) Material 18mm BWR Plywood with all side white laminate.

r)Shutter wall Cabinet (350mm x 600mm ) Laminate on BWR Plywood any colour 2 shutter, 700mm G profile handels and 2 pair Hettich soft close hinges.

s)Loft Cabinet ( 670mm x 300mm x 800) Material 18mm BWR Plywood with all side white laminate.

t)Shutter wall Cabinet (335mm x 800mm ) Laminate on BWR Plywood any colour 2 shutter, 670mm G profile handels and 2 pair Hettich soft close hinges.

u)Loft Cabinet ( 670mm x 300mm x 800) Material 18mm BWR Plywood with all side white laminate.

v)Shutter wall Cabinet (335mm x 800mm) Laminate on BWR Plywood any colour 2 shutter, 670mm G profile handels and 2 pair Hettich soft close hinges.

w)Loft Cabinet ( 1120mm x 300mm x 800) Material 18mm BWR Plywood with all side white laminate.

x)Shutter wall Cabinet (560mm x 800mm) Laminate on BWR Plywood any colour 2 shutter, 1120mm G profile handels and 2 pair Hettich soft close hinges.

y)Loft Cabinet ( 755mm x 300mm x 800) Material 18mm BWR Plywood with all side white laminate.

z)Shutter wall Cabinet (378mm x 800mm ) Laminate on BWR Plywood any colour 2 shutter, 755mm G profile handels and 2 pair Hettich soft close hinges.

aa)Loft Cabinet ( 755mm x 300m x 800) Material 18mm BWR Plywood with all side white laminate.

ab)Shutter wall Cabinet (378mm x 800mm) Laminate on BWR Plywood any colour 2 shutter, 755mm G profile handels and 2 pair Hettich soft close hinges.

ac)Set up for Hettich Make 3 drawers (900mm x 700mm) Laminate on BWR Plywood with 2 Partition on 18mm White laminate on BWR Plywood, 3 base & back, G-Profile handle 1 Hettich PVC cutlery, 1 Plain Drawer & 1 ss Plain Drawer with thali Organizer required channel.

ad)Base Cylinder unit Shutter (610mm x 700mm) Laminate on BWR Plywood 610mm G profile Handle, with 1 pair Hettich soft close hinges & (2050mm X 70mm ) Framing on BWR Plywood.

ae)Base Blind Shutter (620mm x 700mm) Laminate on BWR Plywood 1 shutter With 1 shelf (1250mm x 580mm) on 18mm white Laminate on BWR Plywood 620mm G profile Handle, with 1 pair hinges & (2470mm x 70mm ) Framing on BWR Plywood.

af)Base Cabinet (700mm x 700mm ) Laminate on BWR Plywood 2 shutter With 1 shelf (700mm x 580mm ) on 18mm white Laminate on BWR Plywood 700mm G profile Handle, with 2 pair hinges &(2100mm x 70mm )

ag)Set up for Hettich Make 2 drawers (700mm x 700mm ) Laminate on BWR Plywood with 2 Partition on 18mm White laminate on BWR Plywood, 2 base & back, G-Profile handle 2 Plain Drawer with required channel.

ah)Base Shutter (700mm x 700mm ) Laminate on BWR Plywood 2 shutter With 1 shelf (700mm x 580mm ) on 18mm white Laminate on BWR Plywood 700mm G profile Handle, with 2 pair hinges &(2100mm x 70mm ) Framing on BWR Plywood.

ai)Base Cabinet (670mm x 700mm) Laminate on BWR Plywood 2 shutter With 1 shelf (670mm * 580mm ) on 18mm white Laminate on BWR Plywood 670mm G profile Handle, with 2 pair hinges.

aj)Base Cabinet (670mm x 700mm ) Laminate on BWR Plywood 2 shutter With 1 shelf (670mm x 580mm) 18mm white Laminate on BWR Plywood 670mm G profile Handle, with 2 pair hinges.

ak)Base Sink Cabinet (1055mm x 700mm) Laminate on BWR Plywood 2 shutter on 18mm white Laminate on BWR Plywood 1055mm G profile Handle, with 2 pair hinges. With SS Detargent Rack & SS Waste Bin holder.

Supply & Installation for Chimney Dezire 90 along with all fittings of following specification to be provided as directed by Engr in Charge a)Voltage: AC 220-240 V b) Motor Power: 1 X 240 W c) Illumination Type: LED Lamp d)Auto Clean Type: Dry, Intelligent Auto Clean e)Suction: 1500 plus/minus 50 m3 / Hr f)Noise Level: 58 DB g)Switch Control: Touch Control with wave Sensor h)Unit Dimension: L-900mm x W-500mm x H-570mm Note: Fixing of 6 inch aluminium duct pipe is nearest to the open area and also quoted rate is including of cutting wall of proper size and make good as per existing complete all as specified and as directed

Supply & Installation for HOB TOP: Turbo 378 along with all fittings of following specification to be provided as directed by Engr in Charge a)Burner:Brass Burner b) Burner Power (KW): 2.5kwx 2 , 1.5Wx1 c) Gas Type: LPG d)Ignition (Battery 1.5v): Yes e)Glass: 8mm Tempered Glass f)Unit Dimension: 780 x 450 x 135

Material and labour for (concealed Type) point wiring including necessary chase cutting of wall for one light/fan/call bell point with 1.5 sqmm PVC insulated (FR-LSH) unsheathed copper cable multistranded conductor 1100 volts grade controlled by one way switch including 1.5 sqmm PVC (FR-LSH) insulated unsheathed copper cable multistrand conductor 1100 volts grade for continuity earth wire connected to common earth dolly drawn through and including PVC conduit and making good the distrubed surfaces as per the existing complete all as specified and as directed. Note: A. Red coloured cable shall be used for live connection, black coloured cable shall be used for neutral connection and green coloured cable shall be used for earthing. Separate cable for earthing and neutral to be used for each individual circuit from the distribution board. B. The Rate of point wiring includes the following :- (i) Copper wire (ii) PVC Conduit with accessoreis (iii) Chase cutting

M&L for point wiring concealed type with 4.0 Sqmm (nominal area), PVC insulated, stranded single core unsheathed FR copper conductor cable 1100 Volts grade drawn through with and including PVC conduit/ PVC casing caping with all fittings and accessories of PVC casing caping (like Tee, bend etc.) complete fixed to walls /ceiling /surface/ concealed etc. with and including 4.0 Sqmm (nominal area) PVC insulated, unsheathed, stranded, single core FR copper cable as earth continuity wire connecting to common earth point including supply & fixing of 1.6 mm thick pressed mild steel terminal boxes of suitable size with 3 mm thick PVC / Plastic laminated sheet. top cover, suitable sizes of brass screws and washers etc. for mounting switches, sockets, regulators etc complete for three pin 15 Amp socket outlet on independent board complete all as specified and directed.

All as per item No 86 above but for one 3 pin socket outlet 5 amps on same board complete all as specified and directed.

All as per item No 86 above but for one three pin socket outlet 5 amps on independent board complete all as specified and directed.

All as per item No 86 above but for one three pin socket outlet 15 amps on independent board complete including taking down old unserviceable one all as specified and directed.

S&F Socket 6A - 2/3 pin combined 2 module complete including taking down unserviceable one complete all as specified and as directed.

S & F modular switch socket combination 16 Amps, 6 pin 3 module complete all as specified and as directed.

S&F Ceiling rose PVC surface type 3 terminals complete all as specified and as directed.

S & F 6 Amps one way single pole switch modular type complete all as specified and as directed.

S & F modular metal box 3 way complete all as specified and as directed.

S & F modular white cover plate with frame 3 way complete all as specified and as directed.

S & F modular metal box 8 way complete all as specified and as directed.

S & F modular white cover plate with frame 8 way complete all as specified and as directed.

M & L for 1 X 20 watt LED ceiling/wall mounted lighting fixture with Lamp Lumen not less than 100 lum/watt polycarbonate ,enviornmental friendly ,energy efficient fixed to wall/ ceilling & connecting upto ceiling rose with three core twisted flexible 1.5 sqmm PVC copper conductor cable with earthing complete all as specified and as directed.

M & L for 1 X 10 watt LED ceiling/wall mounted lighting fixture with Lamp Lumen not less than 100 lum/watt polycarbonate ,enviornmental friendly ,energy efficient fixed to wall/ ceilling & connecting upto ceiling rose with three core twisted flexible 1.5 sqmm PVC copper conductor cable with earthing complete all as specified and as directed

Supply and fix wall fan 300mm sweep swing type complete all as per site requirement and all as specified and as directed.

Supply and fix in repairs exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers complete all as specified and as directed.

S & F modular metal box 2 way complete complete and all as specified and as directed.

S & F modular white cover plate with frame 2 way complete and all as specified and as directed.

S & F Switch 16A One way , two modular type switch complete and all as specified and as directed.

S&F Modular Socket 6A/16A - 2/3 pin combined 2 module complete and all as specified and as directed.

S & F sheet metal DB 4 way double door with 200 Amps rated bus bar Single pole with neutral and all as specified and as directed.

M & L MCB DP 'C' series 6-32 Amps complete and all as specified and as directed.

M & L MCB SP 'C' series 5-32 Amps complete and all as specified and as directed.

M&L for concealed sub-main wiring with PVC insulated & unsheathed two run of 4 Sqmm single core multi stranded copper conductor cable (FRLSH), 1100 Volt grade alongwith one run of 4 Sqmm PVC insulated & unsheathed copper conductor cable (FRLSH), 1100 Volt grade, connected to common earth dolly as earth continuity conductor, drawn through 20 mm conduit with all accessories and PVC rectangular boxes for mounting switch socket and fan regulator etc including taking down existing sub main wiring complete all as specified and as directed. Note :- (i) One run of PVC conduit, two runs of cable (Phase + Neutral) and one run of earth wire shall be measured and paid as one unit. (ii) Quoted rate shall deemed to be incluive of chase cutting, laying of conduit and making good the surface as per existing.

R T BUILDERS (BID ID -3458459)

THE PLANTERS ENGINEERING CORPORATION (BID ID -3458171)

NIRMAL DAS AND CO. (BID ID -3459874)

ARATI TRADING CO (BID ID -3458199)

M/S H.P Singha (BID ID -3459973)

K.P Construction Co (BID ID -3458035)

ESS PEE UDYOG (BID ID -3460007)