Loading…
Loading…
Tender Value
₹8.5 Cr
EMD Value
₹17.0 L
Closing Date
1 Sept 2026, 3:00 pm6d left
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
BRIDGE
14 conditions · 2 needing a document upload
Financial Eligibility Criteria: The tenderer must have minimum average annual contractual turnover of V/N or V whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet. Non submission of the documents shall lead to summarily rejection of the offer.
(a)The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i)Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii)Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii)One similar work costing not less than the amount equal to 60% of advertised value of the tender. (b) (1)In case of tenders for composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges - substructure, superstructure etc.), tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i)Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender, or (ii)Two similar works each costing not less than the amount equal to 40% of advertised value of each component of tender, or (iii)One similar work each costing not less than the amount equal to 60% of advertised value of each component of tender. Note for b(1): Separate completed works of minimum required values shall also be considered for fulfillment of technical eligibility criteria for different components. (b)(2)In such cases, what constitutes a component in a composite work shall be clearly pre-defined with estimated tender cost of it, as part of the tender documents without any ambiguity. (b) (3) To evaluate the technical eligibility of tenderer, only components of work as stipulated in tender documents for evaluation of technical eligibility, shall be considered. The scope of work covered in other remaining components shall be either executed by tenderer himself if he has work experience as mentioned in clause 7 of the Standard General Conditions of Contractor through subcontractor fulfilling the requirements as per clause 7 of the Standard General Conditions of Contract or jointly i.e., partly himself and remaining through subcontractor, with prior approval of Chief Engineer in writing. However, if required in tender documents by way of Special Conditions, a formal agreement duly notarised, legally enforceable in the court of law, shall be executed by the main contractor with the subcontractor for the component(s) of work proposed to be executed by the subcontractor(s), and shall be submitted along with the offer for considering subletting of that scope of work towards fulfillment of technical eligibility. Such subcontractor must fulfill technical eligibility criteria as follows: The subcontractor shall have successfully completed at least one work similar to work proposed for subcontract, costing not less than 35% value of work to be subletted, in last 5 years, ending last day of month previous to the one in which tender is invited through a works contract.
Defination of Similar Work :- Any Civil Engineering work.
15 conditions · 2 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Indian Railways Standard General Conditions of Contract, April 2022 (IRGCC, April 2022) with correction slips issued up to date of inviting tender will be applicable for this tender.
As per the Railway Board's letter No. 2017/CE-I/CT/9 dated 31.05.2023 contractor's 'e'MB is applicable in this tender
As per Advance Correction Slip No. 5 dated 20.10.2023 "The Original Bank Guarantee should be delivered in person in this office (i.e in Receive and Dispatch Section of DRM office, Engineering Branch, West Central Railway, Jabalpur) before closing date for submission of bids (i.e. excluding the last date of submission of bids).
Part-A: - Assistant Divisional Engineer (North) Satna: - Provision of drainage and height gauge for LHS 388. Part-B: - Assistant Divisional Engineer (South) Satna: - Provision of drainage and height gauge for LHS 358. Part-C: - Assistant Divisional Engineer (South) Satna: - Provision of drainage and height gauge for LHS 370. Part-D: - Assistant Divisional Engineer (South) Satna: - Provision of drainage and height gauge for LHS 372.
DRMW-JBP-143-2026~WCR
DRMW-JBP-143-2026
Open
Works - General
18 Months
Jabalpur, Madhya Pradesh
₹0
₹17.0 L
4 Aug 2026
4 Aug 2026
18 Aug 2026
75 items across 4 schedules · ₹6,90,83,963.9 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | All kinds of soil | cum | 2698 | 205.45 | 5,54,304.1 |
| 2 | Ordinary rock | cum | 67 | 412.95 | 27,667.65 |
| 3 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. | cum | 1619 | 253.95 | 4,11,145.05 |
| 4 | 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) | cum | 124 | 6,833.4 | 8,47,341.6 |
| 5 | Concrete of M20 grade with minimum cement content of 270 kg /cum | cum | 46 | 8,387.15 | 3,85,808.9 |
| 6 | Foundations, footings, bases of columns, etc. for mass concrete | Sqm | 502 | 307.95 | 1,54,590.9 |
| 7 | Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. | Sqm | 3357 | 669.55 | 22,47,679.35 |
| 8 | Suspended floors, roofs, landings, balconies and access platform | Sqm | 36 | 766.55 | 27,595.8 |
| 9 | Thermo-Mechanically Treated bars of grade Fe- 500D or more. | Kg | 65414 | 89.65 | 58,64,365.1 |
| 10 | Concrete of M25 grade with minimum cement content of 330 kg /cum | cum | 727 | 8,683.8 | 63,13,122.6 |
| 11 | Cement mortar 1:6 (1 cement : 6 coarse sand) | cum | 10 | 8,288.35 | 82,883.5 |
| 12 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | Kg | 18321 | 111.95 | 20,51,035.95 |
| 13 | Using M.S. angels 40x40x6 mm for diagonal braces | Sqm | 3 | 4,781.15 | 14,343.45 |
| 14 | Hot finished welded type tubes | Kg | 1500 | 154.9 | 2,32,350 |
| 15 | Providing and fixing bolts including nuts and washers complete. | Kg | 300 | 140.15 | 42,045 |
| 16 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer- in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | Sqm | 25 | 671.55 | 16,788.75 |
| 17 | 1:4 (1 cement: 4 fine sand) | Sqm | 105 | 339.7 | 35,668.5 |
| 18 | On steel work | Sqm | 300 | 201.7 | 60,510 |
| 19 | Two or more coats on new work | Sqm | 105 | 137.85 | 14,474.25 |
| 20 | Two or more coats on new work | Sqm | 300 | 131.45 | 39,435 |
| 21 | Two or more coats on new work | Sqm | 150 | 121.45 | 18,217.5 |
| 22 | Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) | cum | 5 | 2,007.1 | 10,035.5 |
| 23 | 1200 mm dia RCC pipes. (Laying by manual/ machanical means) | Metre | 150 | 8,118.55 | 12,17,782.5 |
| Schedule total | ₹2,06,69,190.95 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
TenderDocument.pdf
ATTACHMENT
SGCCApril22ACSNo.8to11.pdf
ATTACHMENT
NorthSpecialConditionsLHSDrainage.pdf
ATTACHMENT
Splcond.LetterofCredit.pdf
ATTACHMENT
Annexure-VIB.pdf
ATTACHMENT
RlyBdsletterdated03.6.24JPO-CableCut.pdf
ATTACHMENT
RlyBdsletterdtd31.5.23e-mbmandatemorethan5Cr..pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].