ADDN ALTN TO TOILETS AND SHAFTS OF BUILDING OF 166 MH UNDER GE SATWARI

Amount

NOTE:- Tenderer are earnestly advised to go throw the following under mention notes before coating this tender :- a) Tenderer are strongly advice to visit work site for better comprehension of working limitations / Conditions being Mil Hospital related repair of shafts/ drain pipes/ toiletry items up to 4th floor building. b) Work shall be excuted strictly in accordance with the direction of Engr-In-Charge / GE Phase wise (details of phases as per Sch 'A' Notes Para No 7 on Page No 15(R) inclussive necessary form work / scaffolding as per site condition and no extra payment shall be made on this account.

Demolition of brick work built in cement mortar or cement lime mortar incl all quoins, arches pillars etc and removing unserviceable material from the work site ouside defence premises complete all as specified and as directed.

Brick work with subclass 'B' bricks, using old size bricks, straight or curved on plan exceeding 6 metre mean radius built in cement mortar 1:6 complete all as specified and as directed.

Brick work with subclass 'B' bricks, using old size bricks, straight or curved on plan exceeding 6 metre mean radius built in cement mortar 1:6, but except bricks, complete all as specified and as directed.

Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and as directed.

Structural steel work conforming to Fe-410-W (Gde E-250 Quality-A or B) or Fe-290 Gde E-165, as in door/window in shaft loveours jali with locking arrengment (framed), tee and fastenings, heavy brackets framing (Beam, tee, angle, channel, squre hollow section or flat section) including distance pieces, cleats etc complete all as specified and as directed.

All as per description of Srl item No-5 here-in-before but in main and cross beam, hip and jack rafters, purlines, MS plates ,flates (plain or chequred), square cut or notched etc used as door grating , stair step and balcony passage etc complete all as specified and as directed.

Taking down shutters of any description n.exc 1.00 Sqm each and removing from the site complete all as specified and as directed.

Taking down chowkats or frames with shutter (without taking off shutter from the frame) n.exc 1.5 Sqm each including cutting holes for taking out hold fast or dismantling brick work and removing from site complete all as specified and as directed.

Solid PVC Door Frame of size 50mm x 47mm made out of 5mm Plain colour PVC sheet reinforced with mild steel square tube, supplying and fixing in opening as per specifications and drawing including making good to disturbed surface of walls, complete all as specified and as directed.

Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppplying and fixing in the frame at site as per specification & drawing complete all as specified and as directed.

Taking down of old/unserviceable kitchen cabinet/cupboard including all fixture and fitting, complete all as specified and as directed.

18 mm thick PVC board one side UV printed designing and back side plain colour printed for cub board boxes or kitchen cabinet with shelf, drawer, shutter and frame full size fitted under cooking platform and other platform including fittings etc complete all as specified and as directed.

Pressed steel cup board frame of MS sheet 1.25 mm thick size of frame 60 x 40 mm with rebate of 20 mm wide and 12 mm deep including PCC 1:2:4 as in filling to back of chowkats including butt hinges 100 mm long complete all as specified and as directed.

Prelaminated MDF board 19 mm thick as in shutters/shelves (exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame worknincluding lipping (15 mm thick three sides and 20 mm thick lipping hinge side) around the shutter complete all as specified and as directed.

100mm size Stainless steel handle complete all as specified and as directed.

Continuous (piano) hinges, heavy duty mild steel, bright finish or electrogalvanised with flap of 30mm size sutable for 19mm thick shutter and fixed, complete all as specified and as directed.

Stainless steel Butt hinges, 100mm , complete all as specified and as directed.

Aluminium anodised, barrel tower bolts size 150 mm of extruded section and fixed complete all as specified and as directed.

Aluminium handles, fabricated type, anodised Size-150mm, anodised section and fixed complete all as specified and as directed.

Factory made steel Ventilator/Window double shutter box type, outer frame made out of ERW TUBE 'P' section(65x45x25mm) and shutters of ERW TUBE 'P' section (50x35x20mm) operable shutters side hung includding pistol hinges with two Nos of MS Tower bolts 150mm size on each shutter steel handle and stopper of 'Z' section as specified complete with sash bars devetailed or welded ready for glass fixing and wire gauzed fixing with suitabel fittings/openning for cooler/AC where required .Steel windows will be double shutter external glazed and internal wire gauzed complete all as specifed and as per Drg No CEPZ/TD-324/07 1/3 to 3/3 complete all as specified and as directed.

Mild steel work of flat iron, square bar, round bars etc. as in framed work such as grills, guard bars, gratings etc incl bending, cutting and welding as necessary of confirming to Gde Fe 310-0, complete all as specified and as directed.

3 mm thick sheet glass ordinary quality, glazing with oil putty or any type of beads in square n.exc. 0.5 Sq each pane in any type of frame of iron/Steel/Wood/Aluminium as required at site complete all as specified (upto fourth storey with necessary scaffolding), complete all as specified and as directed.

3 mm thick figured glass, pin head type and glazing with oil putty or any type of beads in square n.exc. 0.5 Sq each pane in any type of frame of iron/Steel/Wood/Aluminium as required at site complete all as specified (upto fourth storey with necessary scaffolding), complete all as specified and as directed.

Central Hole Basin Mixer without Popup Waste System with 450mm Long Braided Hoses Also available fixed in repairs complete all as specified and as directed.

Wall mixer non telephonic shower arrangement with connecting legs and wall flanges, cast copper alloy, chromium plated, fixed in repairs complete all as specified and as directed.

Wall Mixer 3-in-1 System with Provision for both Hand Shower & Overhead Shower Complete with 115mm Long Bend Pipe on Upper Side, Connecting Legs & Flanges (without Hand & Overhead Shower) fixed in repairs complete all as specified and as directed.

Hand Shower 120mm dia Round Shape Multi Flow with Cascade Effect (ABS Body Chrome Plated with Gray Face Plate) with Rubit Cleaning System fixed in repairs complete all as specified and as directed.

Sink Mixer with Swinging Spout (Wall Mounted Model) with Connecting Legs & Wall Flanges fixed in repairs complete all as specified and as directed.

Sink Cock with swinging casted spout with aerator fixed in repairs complete all as specified and as directed.

Pillar cock long neck with aerator 15mm dia cast copper alloy fancy type fixed in repairs complete all as specified and as directed.

Bib Cock cast copper alloy, chromium plated fancy type long body with wall flange & aerator fix with PPR/Iron/CPVC, 15 mm bore fixed in repairs complete all as specified and as directed.

Angle cock with wall flange , cast copper alloy, chromium plated fancy type screwed for 15 mm PPR/CPVC/Iron Pipe, fixed in repairs complete all as specified and as directed.

Exposed Part Kit of Concealed Stop Cock with Fitting Sleeve, Operating Lever & Adjustable Wall Flange (Compatible with ALD-069) fixed in repairs complete all as specified and as directed.

Angle valve with wall flange , cast copper alloy, chromium plated fancy type screwed for 15 mm PPR/CPVC/Iron Pipe, fixed in repairs complete all as specified and as directed.

CP Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for PPR/CPVC/Iron Pipe fixed in repairs complete all as specified and as directed.

CP health faucet (hand shower) with 1 meter long easy flexible tube in chrome finish with wall Hook (Holder) fixed in repairs complete all as specified and as directed.

CP Urinal Spreader fixed in repairs complete all as specified and as directed.

Chromium plated, single towel rail 600mm long fixed in repairs complete all as specified and as directed.

Chromium plated, towel ring , fixed in repairs complete all as specified and as directed.

Stainless steel Shop dish with PU foam fixed in repairs complete all as specified and as directed.

Chromium plated toilet roll holder, fixed in repairs complete all as specified and as directed.

Glass shelf 600mm long, fixed in repairs complete all as specified and as directed.

Corner Glass Shelf (with Bracket) fixed in repairs complete all as specified and as directed.

Chromium plated bottle trap (with internal partition) 32mm size with 250mm & 190mm long wall connection pipe & wall flange., fixed in repairs complete all as specified and as directed.

PVC connection 15 mm x 450 mm including brass check nut at both ends screwed for iron pipe of 15 mm bore.fixed in repairs complete all as specified and as directed..

PVC connection 15 mm x 600 mm including brass check nut at both ends screwed for iron pipe of 15 mm bore.fixed in repairs complete all as specified and as directed.

Overhead Shower 80 mm dia Round Shape Single Flow (ABS Body Chrome Plated with Gray Face Plate) with Rubit Cleaning System including shower arm 240 mm long (Light Weight) Round Shape for Wall Mounted Showers with Wall Flange fixed in repairs complete all as specified and as directed.

Two bay bib cock,cast copper alloy chromium plated fancy type for 15mm CPVC/PPR Pipe fixed in repair complete all as specified and as directed.

Urinal (CAPRIANA in white colour, ) half stall with complete accessories Set, CP Waste Coupling, PVC waste pipe, sprader etc. Size: 375 x 390 x 590 mm fixed in repairs complete all as specified and as directed.

Under counter basin white colour with fixing accessories set, size: 560 x 470, Oval shape, including CP Waste Coupling and PVC waste pipe fixed in repairs complete all as specified and as directed.

Vitreous China, wash basin white, flat back , size 550mmx400 including brackets of any size, including cutting for and pinning in ends of brackets or erecting stand including fixing and supply of waste pipe of 32 mm dia, waste coupling of chromium plated brass. fixed in repairs complete all as specified and as directed.

Full pedestal for WHB fixed in repairs complete all as specified and as directed.

Corner Wall Hung Basin with Fixing Accessories Set, Size : 400 x 400 including CP Waste coupling and PVC waste pipe fixed in repairs complete all as specified and as directed.

PVC valveless,syphonic action type, flushing cistern, low level,white with inlet, ball valve, float and handle including brackets, PVC 32 mm 'L' bend of capacity 10.0 litres and making good to dismantled/damaged floor/surfaces, fixing in repair, fixed in repairs complete all as specified and as directed.

Vitreous china ware pedestal type water closet white, with 'P' or 'S' trap including self closing seat cover, closed pattern with flat bottom,fixed in repairs complete all as specified and as directed.

WC Orissa pattern white with integral foot rest 580x 440 mm including L bend, & PCC bedding in 1:2:4 and making good disturbed floor connecting to trap and flush pipe fixed in repairs complete all as specified and as directed.

PTMT Grating Round 100 mm dia fixed in repairs complete all as specified and as directed.

PTMT Grating Round ( with waste hole) 125 mm dia fixed in repairs complete all as specified and as directed.

PVC Waste pipe 32mm bore of required length fixed in repairs complete all as specified and as directed.

Gun-metal, globe or gate valves, with iron wheel head,screwed both ends for iron pipe of 40 mm bore pipe, including making connections fixed in repairs complete all as specified and as directed.

Gun-metal, globe or gate valves, with iron wheel head,screwed both ends for iron pipe of 25 mm bore pipe, including making connections fixed in repairs complete all as specified and as directed.

Gun-metal, globe or gate valves, with iron wheel head,screwed both ends for iron pipe of 20 mm bore pipe, including making connections fixed in repairs complete all as specified and as directed.

Gun-metal, globe or gate valves, with iron wheel head,screwed both ends for iron pipe of 15 mm bore pipe, including making connections fixed in repairs complete all as specified and as directed.

Taking up or down steel/CPVC/PPR tubing of 15 mm bore pipe and connections,including cleaning for re-fixing or removal to store, complete all as specified and as directed

Taking up or down steel/CPVC/PPR tubing of 20 mm bore pipe and connections,including cleaning for re-fixing or removal to store, complete all as specified and as directed

Taking up or down steel/CPVC tubing of 25 mm bore pipe and connections,including cleaning for re-fixing or removal to store, complete all as specified and as directed

Taking up or down steel/CPVC tubing of 40 mm bore pipe and connections,including cleaning for re-fixing or removal to store, complete all as specified and as directed

Tubes 'medium grade' galvanised, 40 mm bore, ISI marked with all fitting such as bends, tees,elbows, unions,short pieces, connectors, back nuts etc and fixed complete to walls and ceilings or laid in floors, complete all as specified and as directed.

3-layer PP-R Polypropylene random copolymer) 16 mm dia pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete all as specified and as directed.

3-layer PP-R Polypropylene random copolymer) 20 mm dia pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete all as specified and as directed.

3-layer PP-R Polypropylene random copolymer) 25 mm dia pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete all as specified and as directed.

Cutting chases, pinning in , making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings,steps,cills,sunshades,shelves,lintels etc,and cutting chases for concealed water tubing or concealed conduit wiring,etc,and making good,cutting n.exc 10cm girth in brick walls complete all as specified and as directed.

Stainless steel gratings of outer frame dia 100 mm openable type incl all necessary fittings such as hinges including embeding in tiles with white cement fixed in repairs complete all as specified and as directed.

UPVC (SWR) type B pipes 110 mm bore single socketed in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and as directed.

UPVC (SWR) type B pipes 110 mm bore single socketed, in any length with rubber ring joints fixed to walls including stack clamp of GI flat 15mm wide 1.5mm thick (having 50mm clear space from vertical wall) fixed to wall with nail at spacing of 1m center to center ,fixed in repairs complete all as specified and as directed

UPVC (SWR) type B pipes 75 mm bore single socketed in any length with rubber ring joints, laid in trenches or in floors, fixed in repairs complete all as specified and as directed.

UPVC(SWR) type B pipes 75 mm bore single socketed, in any length with rubber ring joints fixed to walls including stack clamp of GI flat 15mm wide 1.5mm thick (having 50mm clear space from vertical wall) fixed to wall with nail at spacing of 1m center to center ,fixed in repairs complete all as specified and as directed.

UPVC (SWR) , bends with access door for 75 mm bore , fixed in repairs complete all as specified and as directed.

UPVC(SWR) , bends with access door, for 110 mm bore fixed in repairs complete all as specified and as directed.

UPVC branch piece, single (single 'Y') with access door for 75 mm bore fixed in repairs complete all as specified and as directed.

UPVC branch piece, single (single 'Y') with access door for 110 mm bore fixed in repairs complete all as specified and as directed.

UPVC branch piece, double (double 'Y') with access door for 75 mm bore fixed in repairs complete all as specified and as directed.

UPVC branch piece, double (double 'Y') with access door for 110 mm bore fixed in repairscomplete all as specified and as directed.

UPVC(SWR), junction single, (single 'T') with access door equal or unequal for 75 mm bore ,fixed in repairs complete all as specified and as directed.

UPVC(SWR), junction single, (single 'T') with access door equal or unequal for 110 mm bore , fixed in repairs complete all as specified and as directed.

UPVC (SWR) , reducers 110 mm dia fixed in repairs complete all as specified and as directed.

UPVC (SWR) vent cowl 75 mm dia fixed in repairs complete all as specified and as directed.

UPVC (SWR) floor trap plain with grating having dia meter of out let 75mm including jointing with solvent cement to waste pipe fixed in cement concrete type B-1 (1:2:4) fixed in repairs complete all as specified and as directed.

UPVC (SWR) multi floor trap with grating including jointing with solvent cement (75mm diameater for outlet in mm) fixed in repairs complete all as specified and as directed.

UPVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement fixed in repairs complete all as specified and as directed.

Rendering 15mm thck in cement mortar 1:3 or Plain Cement Concrete as in sunken floors without extra cement on walls/floors and including mixing of water proofing compound (WPC shall be measured and paid separately) complete all as specified and as directed.

Applying a coat of bituminous primer conforming to IS-3384 on prepared surface of roof/sunken slab after drying of primer apply APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyester non woven fabric (wt not less than 150 gms/sqm) laid on primed surface by forced torched application and finally apply a coat of hot blown 85/25 graded bitumen conforming to IS-702 @ 1.2kg /sqm of plaster surface. NOTE:- After laying of pipes ponding test shall be carried out. After testing sunken portion shall be filled with PCC 1:5:10 type 2 (using 40mm gradeed aggregate, complete all as specified and as directed.

Cement concrete type E-2, 1:5:10 (Using 40 mm graded crushed stone agregate) in Sunkan ( Up to 4th floor) filling and mass concrete complete all as specified and as directed.

25 mm thick cement concrete 1:2:4, type B-0, (using 12.5 mm graded crushed stone aggregate) as in sub base/ levelling course of floors, finished even and fair complete all as specified and as directed.

50 mm dia G I tubing heavy grade galvanised laid in floors as a spout pipe in sunken floors complete all as specified and as directed.

PCC 1:2:4 type B 1 using (20 mm graded crushed stone aggregate) as in blocks for hold fasts, benching, coping apex stones, bed plates and the like including weathering slightly rounded or chamfered angles and throating complete all as specified and as directed.

Demolition of cement concrete (unreinforced) ground floor to 4th floors and pavings n exc 15 cm thickness (below or above ground level ) and removing the rubbish from the work site out side defence premises complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding, terrazo dado from wall surface (but not backing), removing serviceable tiles to store and rubbish off the premises. complete all as specified and as directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc and brushing surface with neat cement slurry with 3.0 kg of cement per Sqm removing serviceable tiles to store and rubbish off the Cantt area complete all as specified and as directed.

Glazed ceramic coloured Digital tiles in vertical surface 300x450x7 mm thick, set and jointed in neat cement slurry and pointed white or colored cement to match the surface over and including 10 mm thick cement mortar 1:4 complete all as specified and as directed.

Non - skid Digital Ceramic edge cut joint free coloured or printed light shade tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm , in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match and set in neat cement slurry and pointed with coloured/white cement to match the surface over and including 15 mm thick screed bed in cement mortar 1:4 complete all as specified and as directed.

16 to 18 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, over and including 15 mm thick cement mortar 1:4 complete all as specified and as directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and as directed.

Providing precast cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregate ), in kerb stones, kneelers, apex stones,pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, anchorage blocks, bonders with plain fair faces. including chamfers, weatherings, throatings etc. and setting in cement mortar 1:6 complete all as specified and as directed.

50 mm thick cement concrete 1:3:6, type C1, using 20mm graded crushed stone aggregate as in plinth protection, laid in slope of 1:20 and surface finished even and smooth without using extra cement including making joint at 3m interval and at each corner the joint shall be filled with bitumen mastic filling to full depth (comprising one part hot blown bitumen 85/25 and two part of sand), complete all as specified and directed.

Precast cement concrete louvers and jallies, 40 mm thick (1:2:4) type B-0 (using 12.5 mm graded crushed stone aggregate ) set in cement mortar 1:6, including all mouldings and dismantling old U/s broken Jallies at site, complete all as specified and directed.

Dismantling of ceiling board(Fibre,pulp,any type of insulation etc) or insulation board / slabs/any thickness including cover fillets and snap grids complete all as specified and directed.

GI snap grid frame work (Grid size 605cm x 605cm) for false ceiling consisting of main runner 'T' of size 24mm x 32mm and 0.3mm thick , Secondary runner 'T' of size 24mmx25mm and 0.3mm thick,GI angle 24mmx24mm and 0.4mm thick,Bottom exposed capping of width 24 mm of all T-sections shall be of 0.25mm thick PPGI, hot dipped galvanised steel with zink coating not less than 120gm / Sqm ,ceiling grid system duly suspended by 4mm dia GI wire hanging from existing purlins /roof slab with butterfly clips including Gypsum ceiling tiles of size 595 x 595 x 7 mm laminated with 0.07 mm thick polyvinyl film on the face side and 10 micron metalized polyester film on the back side fixed on GI snap grid complete all as specified and directed.

Gypsum ceiling tiles of size 595 x 595 x 7 mm laminated with 0.7 mm thick polyvinyl film on the face side and 10 micron metalized polyester film on the back side fixed on GI snap grid complete all as specified and directed..

Sinks with drainage board made of stainless steel 1.00 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm x 200mm & bowl size 410mm x 355mm x 200mm complete with waste coupling & PVC waste pipe fixed in repairs complete all as specified and directed.

Sinks made of stainless steel 1.00 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 680mm x 535mm x 225 mm bowl size 610mm x 460mm x 2225mm complete with waste coupling & PVC waste pipe fixed in repairs complete all as specified and directed.

Taking down cement plaster of any description on brick or stone walls or from concrete surface including raking out joints, hacking for key, scrubbing down with water etc, and removing unserviceable material outside cantt area, complete all as specified and directed.

Rendering 15mm thick on fair faces of brick or concrete surface walls, in cement mortar 1:6 , rendering is to be finished even and smooth without using extra cement complete all as specified and directed.

Rendering 15 mm thick on fair faces of brick or concrete surface walls, in cement mortar 1:4 , rendering is to be finished even and fair without using extra cement (up to 4th storey with necessary scaffolding) complete all as specified and as directed.

Rendering 05 mm thick on fair faces of brick or concrete surface in ceilings, in cement mortar 1:3 , rendering is to be finished even and smooth without using extra cement complete all as specified and as directed.

Repairing of concrete surfaces such as balcony, chajjas, upward or downward facias ,column, pillar, ceiling and similar items with plain cement concrete 1:2:4 type B-0 using 12.5mm graded crushed stone aggregate or rendering 10-15mm thick as per site requirement in cement mortar 1:3 without using extra cement finished even and fair complete all as specified and as directed.

Applying two coat of synthetic enamel paint over a coat of red oxide primer on new steel surfaces of any description having width/girth exceeding 10 cm including preparation and rubbing with sand paper to make surface even and smooth complete all as specified and as directed.

Applying one coat of synthetic enamel paint on old painted steel surfaces of any description having width/girth exceeding 10 cm including preparation and rubbing with sand paper to make surface even and smooth and apply putty and primer where requred complete all as specified and as directed.

Preparing the putty surface by rubbing with sand paper and applying two coats of oil bound distemper on old surface of wall/celling (up to 4th storey with necessary scaffolding) using airless spray technology with a max working pressure of 3300 PSI and capable of operating single spray gun with a max material. With hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by a reputed paint manufacturer and as mentioned in PS and accessories for applying distemper The mechine should be able to apray in hard to reach areas with penetration of distemper on the surface complete all as specified and as directed.

Preparation of newly plastered surface by rubbing with sand paper to putty surface of two coats wall care putty, 1 to 2mm thick on walls/ ceiling (up to 4th storey with necessary scafloading) and applying two coats of oil bound distemper using airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacture with pro guard technology and capability of tracking pressure and paint usage and certified by a reputed paint manufacturer and as mentioned in PS and accessories for applying distemper The machine should be able to apray in hard to reach areas and penetration of distemper on the surface complete all as specified and as directed.

Preparation of newly plastered/concrete surfaces of walls (up to 4th storey with necessary scafloading) and applying two coat of interior emulsion paint on internal surface of shaft over a coat of primer complete all as specified and as directed.

Water based premium acrylic smooth exterior emulsion of approved colour (up to 4th storey with necessary scafloading) with silicon additive excellent dirt pickup resistance with low VOC less than 50 Antifugia Anti Algai propwrties in two coat 1.79 ltr (undiluted) 10Sqmm diluted with water as per manufacture instruction applied over priming surface with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI Allow 6-8 hours to dry the surface in between subsequent coat of paint complete all as specified and as directed.

Preparation of old plastered/concrete surfaces of walls,by complete removal of existing treatment (up to 4th sorey with necessary scaffolding) and applying two coat of apex paint over one coat of primer complete all as specified and as directed.

Preparation of new plastered/concrete surfaces of walls, (up to 4th sorey with necessary scaffolding) and applying two coat of cement based paint over one coat of primer complete all as specified and as directed.

Preparation of old decorated plastered /concrete/ brick surfaces of walls (up to 4th storey with necessary scaffolding) and applying one coat of cement based paint on old decorated surfaces complete all as specified and as directed.

Preparation of old decorated brick /concrete plastered /un-plastered surfaces of walls, Pillars, cornices etc by booming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying two coat of lime white wash on the walls, pillars, cornices etc.complete all as specified and as directed.

Preparation of new decorated brick /concrete plastered /un-plastered surfaces of walls, Pillars, cornices etc and applying three coat of white wash in ceilings complete all as specified and as directed.

Demolition of reinforced cement concrete of any discription in ground upto 4th floors and removing the rubbish from the work site out side defence premises, complete all as specified and as directed.

RCC M-15, nominal mix, type B-1(1:2:4), using 20mm graded crushed stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified and as directed.

TMT mild steel bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for column, hooking end and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips,complete all as specified and as directed.

Use and waste form work to soffits of suspended slabs such as roof slabs, floor slabs landings and similar work, not exceeding 200mm thick (horizontal or sloping) for fair finished surfaces of concrete, complete all as specified and as directed.

Use and waste form work to edges of concrete flats, treads, break in floors, window cills, concrete railings, openings in concrete walls, floor and roof and not exc. 20cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc. 10cm but n.exc. 20cm wide for fair finished surfaces of concrete, complete all as specified and as directed.

Repair to PVC pipe/CI pipe including making the joints water tight by using suitable material including cleaning if required and refixing of any dia complete all as specified and as directed.

Sealing of WC/Floor traps joint and joints between rain water pipe and roof by using neat white cement paste or leak proof material and making the joint leakproof in case seepage is observed from WC/Floor trap and jointing of of rain water pipe and roof slab complete all as specified and as directed.

Taking down carefully aluminium/copper conductor point wiring (light, fan, light socket, power socket) complete fitting such as swithes, sockets, lamp holder, utility light fitting, fan regulator etc and removing materials from sites and making good distrubed surface of walls and roofs complete all as specified and as directed.

Replacement of point wiring complete with 1.5 Sqmm single core multi stranded copper conductor FRLSH insulated and unsheathed heavy duty cable in colour code including contineous earth wire with cable of size 1.5 Sqmm copper conductor flexible FRLSH insulated drawn in existing concealed / surface PVC/Steel conduit and including terminated into suitable module Modular Metal flush Boxes of Make : Elvira Indoasian or equivalent in List of makes. including white cover plate with frame as per relevant IS for mounting switches, sockets, fan regulators etc complete all as specified and as directed.

One light/fan point controlled by one, one way switch 6 Amp complete all as specified and as directed.

One 3 pin modular socket outlet 6 amp independent board complete all as specified and as directed.

One 3 pin modular socket outlet 6 amp on same board complete all as specified and as directed.

All as per description of srl item No 138 above but for one 3 pin modular socket outlet 15/16 Amps independent with cable of size 2.5 Sqmm for point wiring and 2.5 Sqmm as in continuous earth wire complete all as specified and as directed.

Switch modular one way 06 Amp,1 module complete all as specified and as directed.

Switch modular one way 16 Amp,1 module complete all as specified and as directed.

Modular socket 6A-2/3 Pin 2 module 230V AC complete all as specified and as directed.

Modular socket 6A/16A-3 Pin 2 module 230V AC complete all as specified and as directed.

LED light fitting 1x9W/1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.

Exhaust fan, steel body AC single Phase. 230V of size 380m sweep with, blades, and frame and louvers complete all as specified and as directed..

Ceiling rose surface, backelite, three terminal, 240 volts complete all as specified and as directed.

Lamp holder, Polycarbonate type with back plate suitable for batten fittings complete all as specified and as directed.

LED light fitting 1 x 20 Watt, 220 V AC batten retrofit type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.

MCB SPN complete 40-63Amp with rupturing capacity 10 KA 'C' series, complete all as specified and as directed.

MCB single pole 6 to 32 Amp with rupturing capacity 10 KA 'C' series complete all as specified and as directed.

Distribution Board (SPN) double door 08 Way and should be IP 54 protected with Bus bar, Earth Bar, neutral Bar complete all as specified and as directed.

Distribution Board (SPN) double door 04 Way and should be IP 54 protected with Bus bar, Earth Bar, neutral Bar complete all as specified and as directed.

Sub main wiring with single core cable 2 x 4 Sqmm FRLS insulated Unsheathed stranded copper conductor cable 1100 Volts grade in rigid PVC conduit (Concealed) medium grade alongwith 1x4 Sqmm FRLS insulated unheathed copper conductor cable as earth wire connected with main earth dolly including chiseling, cutting & making good to match with the existing surface complete all as specified and as directed.

M/S MANJIT SINGH AND SONS (BID ID -3114072)

M/S MOHAN LAL SHARMA (BID ID -3130996)

M/S Shesh Paul Gupta (BID ID -3130411)

M/S ARUN ANAND (BID ID -3117677)

Tarmac Road and Roof Builders Srinagar (BID ID -3121740)