Construction of Anganwadi Building Kurukathancheri Panchayat at Nallur Block in Cuddalore District under MLA 2025-2026 (Thittakudi)

Amount

Earth work excavation and depositing on bank with in initial lead of 10m and lift of 2m in hard gravelly soil as per SS 20 B for foundation

Sand filling with good M.Sand including all cost and conveyance of all materials and all labour charges etc., complete.

Cement concrete 1:4:8 mix using 40mm ISS metal including cost and conveyance of all materials to site and all labour charges for mixing, laying and curing etc complete

Brick work in cement mortar 1:5 mix using country bricks including cost and conveyance of all materials to site and all labour charges etc complete

Brick work in C.M 1:5 mix using country bricks including cost and conveyance of all materials to site and all labour charges etc complete

RCC 1:1.5:3 mix using 20mm metal including cost and conveyance and all labour charges etc.Up to Basement

RCC 1:1.5:3 mix using 20mm metal including cost and conveyance and all labour charges etc.For Super structure

CC 12:4 mix using 20mm metal including cost and conveyance and all labour charges etc.For Super structure

Supplying and errecting for sides & soffits including supports and strutting upto 3.29m height for plane surface in all floors including cost and conveyance and all labour charges etc.

Supply and fabrication of steel including cost and conveyance and alla labour charges etc. complete.

Plastering with cement mortar 1:5, 12mm thick including cost and conveyance and all labour charges etc.

Plastering with cement mortar 1:4, 20mm thick including cost and conveyance and all labour charges etc.

Supplying and applying of two coats of putty of 3mm thick over the exposed RCC surface of ceiling including finishing the joints smoothy with grinding machine and the surface shall be thoroughly cleaned out of dust and scrubbing. The Surface shall then be allowed to dry for atleast 48 hours. It shall then be sand papered (waterproof abrasive sheet) to give a smooth and even surface. Any unevenness shall be made good by applying 1st coat of putty mixed with water on the entire surface including filling up the undulations and applying 2nd coat of putty after 6 hours of 1st coat of putty and then sand papering (waterproof abrasive sheet) the same after it is dry and finishing the surface smoothly, etc., complete complying with standard specifications and as directed by the Departmental Officers. [ The rates are inclusive of hire charges for grinding machine with wheel, cost of sand paper (waterproof abrasive sheet), cost of putty blade, labour charges for grinding the joints and sand papering, two coat of putty, scrapping the putty area to level the surface smooth, etc., complete]. The Putty shoule be got approved by the Executive Engineer before use on work.

Granolithic floor finish with C.M. 1: 2:4 mix to 20mm thick using 10 to 12 mm chips including cost and conveyance and all labour charges etc,.

Paving the floor with Vertified tiles of size 600x600x8mm laid over 20 mm thick cement mortar 1:3 (One Cement and Three Msand) base mortar over the existing floor including cutting the tiles to the required size with special cutter wherever necessary, la

Towards the cost of steel door of size 0.90mx2.10 m including all charges etc.

Towards the cost of steel door of size 0.75mx1.80 m including all charges etc.

Towards the cost of steel Window of size 1.20mx1.30 m including all charges etc.

Towards cost and fixing of RCC Jolly of size 0.90x0.45m including cost and conveyance and labour for fixing etc

Labour charges for fixing of doors,windows and ventilator including all charges etc. D-Doors

Labour charges for fixing of doors,windows and ventilator including all charges etc. W-Window

Provision for electrification arrangements with service connection Light point

Tube Light fitting

Fan point

Plug point

Bulk head

DPI swtich of 500 V

G I Pipe

Service Wire

E B Deposit

Distembering using two coats of Distember from aÁoved company including cost and conveyance of all materials to site and all labour charges etc complete for 10 sqm(Inner)

Painting two coat with ready mixed plastic emulsion of first quality paint and of approved colour over a priming coat including thorogh scarpping clean removal of dirt etc complete.

Painting two coats using Ist quality readymix enamel paint of approved colour over new iron work including cost and conveyance and all labour charges etc.

Towards the cost and supply of Indian type water closet including etc .

Towards the cost and supply of Europien type water closet including etc .

Towards the cost and supply of Cuddapah slab for Shelf including etc complete.

Provision for 1000 liter Sintex tank

Labour charges for fixing of 1000 liter tank

Provision for Water Supply Arrangements etc

Provision for Sewage line Arrangements etc

Provision for Rcc precast slab RWH arrangements

Provision for Name Board

GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}

K RajMohamed (BID ID -1446099)