Construction of New Multi-Purpose Hall at Kayamozhi in Kayamozhi Pancahayt in Tiruchendur Union

Earthwork excavation and depsoiting on banks with an initial lead and lift in Hard soil etc, complte as per SS20B for foundation.

Collection and supply of M.Sand and filling into the foundation and basement including cost and conveyance of sand and labour charges etc, complete

Cement Concrete 1:4:8 mix, using 40mm ISS, HBG metal including cost and conveyance of materals and labour charges for laying, compacting, curing etc, complete.

Supply and erection of centering for sides and soffits of concrete works inclduing cost and conveyance of materials and labour charges etc, complete.

Below Ground Level

Above Ground Level

Supply and fabrication of steel including cost and conveyance of steel and labour charges for cutting, bending and placing in position etc, complete

RCC 1:1.5:3 mix, using 20mm ISS, HBG metal including cost and conveyance of material and labour charges for laying, compacting, curing etc, complete.

Brickwork in CM 1:5 mix, using country bricks including cost and conveyance of materials and labour charges etc, complete

Brick partition walls using Chamber bricks of size 9"x43/8"x23/4" etc., complete.

Weathering course with best quality broken brick jelly of 20mm size in pure slaked lime over RCC roof slab etc, complete.

Finishing the top of roof with one couse of pressed tiles 23x23x2cm laid in cm 1:3 mix, etc, complete

Paving the floor with Vitrified tiles laid in cm etc, complete

Supply and applying wall putty 3mm thick over the RCC surface

Providing UPVC (Un-Plasticized Polyvinyl Chloride)Door: Providing and fixing casement doors fabricatedfrom un-plasticized polyvinyl chloride (uPVC) sections.Profiles: The profiles should be three chamber systemwhich provides high insulation properties with outer frame60mm x 55mm with an outer wall thickness of 2.4mm.The window unit should be designed with all corner jointsmitred and fusion welded. Windows should be steelreinforced with 25 x 24 x 25mm steel reinforcement witha thickness of 1mm to have dimensional stability. Thesash should be of 60 x 102mm. The mullion should be of60 x 74mm. The profiles should have co-extruded seals. Hardware: All the hardware like friction stays,handles should be screwed with self tappingscrews. The handles, locks should be designedso that they cannot be released from outside.Glazing: The window system should be glazedwith 5mm plain float glass / 6mm bison lamInstallation: The profiles should be cut to length and welded45 degrees. The window should be designed such that thewater drainage does not pass through the reinforcementchamber. The window system should be fixed directly to the plastered brick wall using self expanding nylon plugand driving ms electroplated screws into plug.

UPVC Window Specification: Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the Executive Engineer before use on work

UPVC Ventilator Specification: Supplying and fixing UPVC(Un-Plasticized Polyvinyl Chloride) Louvered Ventilatorsof from the profile the size of outer frame 60mm x 58mmand shutter profile size of 60 x 78mm both profiles arereinforced with GI/1mm 125GSM and 100% corrosionfree, the profile are multi chambered sections with wallthick of 2mm. The EPDM rubber (black colour) coveredwith all over the edges of frame and shutter. The cornersand joints should be welded and cleaned. Radiationspin headed glass 4mm thick should be provided in thelouvers. The window should be fixed to the wall with100% packing with screws and silicon packing all roundthe frames. The ventilator should be got approved fromthe Executive Engineer before use on work

Plastering with cm 1:5 mix, 12mm thiick including cost and conveyance of materials and labour charges etc, complete

Emulsion painting two coats with approved colour and quality over one coat of primer including cost and conveyance of materials and labour charges etc, complete

Painting two coats for steel doors and windows with ready mixed enamel paint including cost and conveyance of materials and labour charges etc, complete

Light / Fan point SD 20

Plug point SD 36

Ceiling Fan SD 110

Single box type 4'36Wfluorescent fitting complete (SD 87)

GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}

Please Enable Macros to View BoQ information