Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹29.3 LAccepted-AOC | L1 | Accepted-AOC Being Lowest | |
| 2 | L2₹29.8 L+₹24,266.68 (0.82%)Rejected-Finance WZ 199 LAJWANTI GARDEN GALI NO 4 NEW DELHI 110046 | NEW DELHI | DELHI | 110046 | L2 | Rejected-Finance Not Being Lowest | |
| 3 | L3₹30.3 L+₹67,884.68 (2.29%)Rejected-Finance BARIYAWAN BARIYAWAN BARIYAWAN BARIYAWAN AMBEDKAR NAGAR UTTAR PRADESH 224210 | AMBEDKAR NAGAR | UTTAR PRADESH | 224210 | L3 | Rejected-Finance Not Being Lowest | |
| 4 | L4₹31.4 L+₹1.8 L (6.03%)Rejected-Finance | L4 | Rejected-Finance Not Being Lowest | |
| 5 | L5₹31.6 L+₹2.0 L (6.72%)Rejected-Finance | L5 | Rejected-Finance Not Being Lowest |
Tender Value
₹44 L
EMD Value
₹88,000
Closing Date
6 Sept 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (Central) Delhi Cantt-10
GE (Central) Delhi Cantt-10
ADDN/ ALTN AND IMPROVEMENT TO BLDG NO P-35 AT SIGNAL ENCLAVE UNDER GE (CENTRAL) DELHI CANTT-10
2023_MES_613307_1
GE/C-45/2023-24
Open Tender
Civil Works
Item Rate
180 days
GE (Central) Delhi Cantt-10
As per NIT
9 documents required · 9 mandatory
₹500
Yes
GE (Central) Delhi Cantt-10
₹88,000
Yes
18 Sept 2023
11 Aug 2023
8 Sept 2023
11 Aug 2023
6 Sept 2023
25 Aug 2023
11 Aug 2023 - 25 Aug 2023
Amount
M & L for removal of plants ( area with in n exc 0.50sqm) growth by injection with chemical glyphosphate solution (4 % concentration) @ 20 ml or till refuse by cutting or injection in stem of plants or roots at 30 mm. The area shall then be sprayed with solution 25 ml glyphosphate (4% conc) diluted with 1 ltr of water, including taking out roots from roof / brick work and making good the disturbed surface with plaster and PCC 1 :2:4 type B0 and disposing the rubbish from site (MOD land) for a block of eleven flats of 5 storey height complete and as specified.
M &L for Brushing neat cement slurry with 3 Kg of cement per square metre complete all as specified and directed .
M&L for PCC 1:2:4 of 50 mm thick (using 12.5 mm aggregate) type B-0 as in levelling course using WPC (@ 3% of cement wt.) finished even and smooth without using extra cement upto G+3 storey bldg. Note:- Cost of WPC is not included will be paid separtely.
M&L for 15mm average thick (average) rendering in cement mortar 1:4 using WPC (@ 3% of cement wt.) on roof surfaces & finished even and smooth with using extra cement in any position upto G+3 storey bldg complete all as specified. Note:- Cost of WPC is not included will be paid separtely.
M & L for applying Smartcare Dampproof, a fibre reinforced elastomeric liquid water proofing membrane formulated with reinforcing acrylic fibers having Sun Reflectivity Index (SRI) of 105 on top of roof surface in multiple coats @2 litre/sqm. Primary coat is self-priming coat of elastomeric waterproofing liquid (dilution with water in the ratio of 3:1) and other coats needs to be applied undiluted. The coating needs to be reinforced with 40 GSM geotextile, to sandwiched between 2nd & 3rd coat of coating. The application shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes, complete in all respect as per the direction of Engineer-in-Charge. When the 2nd coat is wet, the Smartcare EPDM tape (at corners and edges)shall be inserted between second and third coat to secure corners & edges, let the material ooze out from the tapes corner. Same treatment of Smartcare Dampproof shall be continued to the parapet walls to better envelope the whole area. The coating shall be terminated carefully to the other side of the parapet wall.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), laid bedded and pointed in any mortar and removal and removing old tiles from premises complete all as specified and directed.
S&F for digital glossy finish vitrified tiles 10 mm thick of Dark shade (Square/rectangular) polished area of each tile not exceeding 0. 36 sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15mm thick screed bed in CM 1:4 Complete all as specified and directed.
All as per item No 07 hereinbefore but in vertical surfaces such as skirtings, dados and risers to steps etc.
M&L for 10mm thick screed plaster on fair faces of brick work/concrete in CM 1:3 to receive tiles as in dado complete all as specified and directed.
M&L for Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15mm thick screed bed in CM 1:4 Complete all as specified and directed.
M&L for Coloured glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as spd.
Taking down Chowkats or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each(without taking off shutters from the frames) all as specified and directed.
Taking down Chowkats or frames not exceeding 1.5 Sqm each(without taking off shutters from the frames) all as specified and directed.
Factory made signle extruded WPC (Wood Polymer Composite) solid door/ window/ ceosetory windows and other frames/ chowkhat of size 45x70 mm comprising of virgin PVC polymer of K value 58-60 (suspension grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750kg/ cum, screw withdrawl strength of 2200N (Face) and 1100 N (edge), minimum compressive strengthy of 58N/ mm2, modules of elasticity 900 N/ mm2 and resistance to spread of flame of being termite / borer proof, water/ moisture proof and fire retardant and fixed with MS hold fast/ lugs/ SS dash fasteners of required dia and length complete as per direction of Engr-in-Charge. (MS hold fast/ lugs or SS dash fasteners shall be paid for separtely). Note: For WPC solid door/ Window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. variation in profile dimensions on plus side shall be acceptable but not extra payment on this account shall be made.
Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (suspension grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/ cum and screw withdral strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistace to spread of flame of Class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction Engr-in-Charge. Note: Stainless steel butt hinges and necessary S.S screws shall be paid separtely)
S & F for pressed steel frame door size 105 X 60mm with one or more revits including nessesary fixing lugs, hinges, lock strike plate etc complete all as specified and directed by Engr-in-Charge.
S&F 35mm thick 2nd class Hard wood rail & style (factory made) plain, framed, paneled shutter with lock rail & panel of 12mm veneered particle board with commercial veneering on both sides (incl two nos 150 mm long extruded aluminium tower bolts, three nos 100mm long medium weight MS butt hinges, two nos 150 mm long extruded aluminium handles, one door stopper140mm long extruded aluminium and one no 300 mm long Aluminum Sliding door bolts and two coats synthetic enamel paint along with one coat of pink primer), complete all as specified and directed. The size of rail & style as per IS :1003 (Part I), Kiln seasoned & chemicals pressure treated, complete all as specified and directed Note :- Rate quoted are deemed to be inclussive of fixture and fittings mentioned to each door shutter and painting.
M&L for 35 mm thick 2nd class hard wood glazed and Skelton door shutter, factory made, open rebated and prepared to receive glass/gauge etc. (without sash bar) edge of frames plain, chamfered or rounded, fitted with cut & mitered beads for securing glass/gauge etc size of member as specified in SSR Part I Section 8 clause 8.24(a) and fixed to chowkat(incl two nos 150 mm long extruded aluminium tower bolts, three nos 100mm long medium weight MS butt hinges, two nos 150 mm long extruded aluminium handles, one stopper and one no 300 mm long Aluminum Sliding door bolts, wire mesh / glass and two coats synthetic enamel paint along with one coat of pink primer) complete all as specified and directed. Note :- Rate quoted are deemed to be inclussive of fixture and fittings mentioned to each door shutter and painting.
S&F for 12mm thick frameless plain/frosted toughnened glass door / partition shutter of approved brand and manufacture incl providing and fixing top & bottom pivot and double action hydraulic floor spring type fixing arrangement and making necessary holes etc for fixing reqired incl taking down of existing work all complete as per direction by Engr-in-charge (handle ,lock and stoper included)
Providing and fixing factory made UPVC any colour sliding window. Three track of area n exc 2.00 Sqm each made of extruded profiles with wall thickness of 2.3mm (+0.2mm). Window profile with hollow section with multi chamber, frame ((88mm x 52mm), sliding sash (42mm x 67mm), sliding mesh sash (42mm x 57mm) sliding interlock (one vertical length in each shutters) (45.5mm x 28mm). Glazing bead (24.5mm x 16mm) will be mitred cut and fusion welded at all corners, including railing of holes for fixing hardware and drainage of water etc, making arrangement for fixing of hardware EPDM gasket, 1.2 + 0.2mm thick galvanized steel frame (30mm x 18) 02Nos, sliding sash(30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in reqd. Profile, frame will be fixed to the wall with 8mm x 100mm long fasterners. Hardware ( Touch lock of zinc alloyed (any colur powder coated) , steel roller system, including 5mm thick toughened glass with single glazing bead and weather seal, stainless steel wire cloth 0.36mm nominal dia of wire and avg width of aperture 1.40mm and required accessories). Note:- Net opening will be measured for payment purpose.
Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per specification and directed by Engineer-in-Charge.
S &F Anodised aluminium window and ventilator shutters, fixed type without sash bars, aluminium sections weighing of 0.55 kg/RM including fixed with alumnium beading, silicon lining and gaskets,necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc complete all as specified and directed.
S&F anodised aluminium door shutters, aluminium section weighing 1.10kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified.
M & L for 18-20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite,front and side of slab moulded and polished including dismantling the existing stone slab with screed/ backing and removal of debries out side the MOD Land complete all as specified and as directed.
S&F for Drappery curtain rods decorative type stainless steel 25mm nominal dia of approved quality (3mm wall thickness) including fixing of two number decorative brackets fixed in brick/concrete wall, two number of latto on both end s of curtain rods, complete all as specified and directed by Engr-in-Charge.
Demolition of Brickwork or stone/ boulder masonry but built in cement mortar in any description and position complete all as specified and directed.
M&L for Brickwork with subclass ‘B’ bricks of old size straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed.
M&L for Brickwork with subclass ‘B’ bricks straight or curved on plan to any radius in half brick thick wall built in CM 1:4 complete all as specified and directed.
Taking down cement plaster on brick walls including racking out joints, hacking for key, scrubbing down with water etc.
M&L for rendering 15 mm in cement mortar 1:6 thick on fair faces of brick work or concrete surfaces complete all as specified and directed
Rendering 15mm thick in two layers considering of 5mm thick in cm 1:4 over 10mm thick in CM 1:4 on fair faces of brickworks including finished even and fair.
M&L for Complete removal of existing treatment on walls and smoothen the surfaces with a coat of 2mm thick wall care putty and applying two coats distemper oil emulsion over a coat of alkaliresistant priming all as specified and directed.
M&L for preparing Newly plastered surfaces and apply a coat of 2mm thick wall care putty for making smooth surface and applying two coats of distemper oil emulsion over coat of primer on surfaces of walls.
M&L for Newly plastered or unplastered wall surface and apply 2mm thick wall care putty for smooth surface and applying three coats of weather coat/apex paint on walls/ceilings complete all as specified and directed.
M&L for Complete removal of existing treatment surface of wall and applaiying three coats of weather coat/apex paint on walls/ceilings complete all as specified and directed.
M&L for Complete removal of existing treatment of plastered or unplastered ceiling surface and applying two coats of distemper oil emulsion complete all as specified and directed.
M&L for 75 mm thick Cement concrete type C2, 1:3:6 (using 40 mm graded stone aggregate) plinth protection of flooring/ hard standing/pavings/plinth protections, finished even and smooth without using extra cement complete all as specified and directed
PVC valveless, syphonic action type, flushing cistern, (10ltrs capacity) low level, white, with inlet, ball valve, float and handle including brackets.
S&F Flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern complete all as specified and directed.
S & F in repairs vitreous china coloured Wash hand basin of size 580 x 440 x 290 mm with full pedestal of height 800mm complete including 32mm dia CP Waste, 02 Nos of CP Connection 450mm long and PVC down pipe of 750mm long , including provision of pair of mild steel iron brackets of suitable size duly painted and cutting for and pinning in ends of brackets in walls and making good complete all as specified and directed.
S&F in repair CP 15mm dia for sink /wall mixer cast copper alloy with capstan heads, chromium plated screwed down high pressure with or without lettered 'Hot or Cold' with long screwed shank and fly nut screwed for iron pipe & fixed.
S&F in repair 15mm bore CP Angle/stop valves fancy type, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.
S&F in repair CP 15mm bore Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed Complete all as specified and directed.
S&F for PVC connections 15mm size with PTMT nuts of length 600mm long complete all as specified and directed.
S&F for in repair gun-metal, globe or gate valves 20mm bore, with iron wheel head, screwed both ends for iron pipe and fixed.
S&F for in repair ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed
M&L for in repair 32mm waste fittings brass of chromium plated for wash basin etc, with long screwed shanks and fly nut, flange end bedded in red lead cement and others and fixed.
S&F in repair 40mm waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed
S&F for PVC waste pipe 32mm dia complete all as specified and directed.
S&F for 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.
S&F for 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.
S&F for 110mm bore PVC (SWR) bends any radius complete all as specified and directed.
M&L for PVC (SWR) floor /Nahani trap plain with including 63mm dia grating including jointing with solvent cement in repair complete all as specified and directed.
S&F in repair aluminium anodised tubular towel rail 20mm dia D type 60cm long between flanges including per pair brackets for each towel rail.
S&F in repair aluminium hat pegs solid body 125mm to 175mm long.
Taking up or down 20mm GI tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed.
Taking up or down 15mm bore GI tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed.
S&F for 20mm bore GI tubing medium grade with all fittings and fixed to wall and ceiling or laid in floors etc complete all as specified and directed by Enge-inCharge.
S&F for 15mm bore GI tubing medium grade with all fittings and fixed to wall and ceiling or laid in floors etc complete all as specified and directed by Enge-in-Charge.
M&L for Cutting chases on brick or concrete surface and making good, cutting not exc 10 cm girt for concealed water tubing and making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc.
S&F for Rotational moulded polyethylene water storage tank capacity 500ltrs (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including dismantling water tanks and removing to store, complete all as specified and directed by Engr-in-Charge.
S & F in repairs vitreous china coloured European type WC of P or S trap , floor mounted (One piece EWCs with duroplast slim seat cover and twin flush fittings) including connection to drain and fixing bolts, Plastic water closet seat cover complete all as specified and directed. NOTE : The rate quoted by the contractor for the above item is inclusive of all fittings and fixture and for entire completion of work.
M& L 300 x 300 mm , 22 to 25mm thick chequered cement concrete tiles, set, jointed and pointed in near cement slurry in floors including 15mm thick screed bed in floor in C M 1:6 including cement concrete 1:2:4 type B-1 (20mm graded stone aggregate) as in levelling course 25mm thick including demolition of existing flooring/hardstanding all as specified and disposing to debries etc all as directed.
Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets.
S&F false ceiling using plain galvanised steel ceiling system consisting of 600X600 mm lay in tiles of pre coated galvanised steel sheet 0.5mm thick in white or coloured to be laid on grid system with 15mm wide T section of size 600 X 45 X 15 mm flanges having rotary stiching on the main runner. The main runner spaced 600 mm centre to centre flush fitting 600 mm long cross tees to be interlocked between runner at 600 mm centre to from 600X600 mm module perimeter trim to be wall angle of size 3000 X 45 X 15 mm secured to wall and including suspension system as per manufacturer instruction aomplete all as specified and directed.
S&F in MS Framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, incl two coats of synthetic enamel paint over a coat of red oxide complete all as specified and directed. conforming to Fe -290 Gde E-165 comple all as specified and directed.
Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.
S &F Stainless steel grill AISI 304 grade using 10mm thick size hollow square bar (100mm c/c) weight not less 0.62 Kg/mt including necessary frame and accessories for window and ventilator grill complete all as specified and directed.
Surface excavation n. exc 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil complete all as specified and directed.
M&L Hardcore of broken stone of gauge n. exc 63mm deposited, spread and levelled in layers not exc 100 mm thick watered and rammed to a true surface complete all as specified and directed.
Sand filling under floors or in foundations including watering and consolidations complete all as specified and directed.
M&L Machine pressed precast concrete interlocking paver block any shape and size conforming to IS 15658-2006 of 80mm thickness M-40 Grade with grey cement and pigment complete all as specified and directed.
Excavation in trenches n exc 1.5m wide and n exc 1.50m in depth for foundation etc and getting out in soft/loose soil complete all as specified.
M&L PCC 1 : 4 : 8 type D2 using 40mm graded stone aggregates as in foundation of manholes, posts etc complete all as specified.
Returning filling in, incl spreading levelling watering and well ramming in layers n exc 25cm (after the pipes have been laid and tested) in soft/loose soil complete all as specified.
Removing excavated materials to a distance exc 1.50 Km but not exc 5 Km outside defence land and depositing where directed.
M&L cement concrete 1:2:4 type B 2 (20mm graded stone aggregate) as in finished floor of 75mm thick, complete all as specified.
M&L form work to roof slab, chajja, weather shade, troughs and similar items including edges for rough finished surfaces of concrete flat, etc. complete all as specified and directed.
Supply and fix TMT bars, 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) but not less than 0.9 mm dia conforming to Fe-410 - 0, complete all as specified.
All as per Item No 80 above but 8 mm dia as in stirrups.
M&L reinforced cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) (nominal mix) as in Lintels, beams, over 1.50 mtr and the like including bonding agent , complete all as specified
M & L for providing precast reinforced cement concrete jallies 45 mm thick including all mouldings type B-0 1:2:4(12.5mm graded stone aggreagte) set in cement mortar 1:4, complete all as specified.
S&F DWCPE(SN8) 150mm dia (Internal Dia) pipes,snap fit coupler and rubber ring incl testing and laid and properly jointed laid in trenches to a level on concrete bed complete all as specified.
Supply only WPC
Taking down carefully copper/aluminium point wiring from wooden battan or conduits (light, fan, socket or power) complete including (fittings such as switches, ceiling roses, pendants, regulator, sockets etc. to be measured separately) and making good disturbed surfaces of walls, floor etc.
Taking down old MCCB , TPN DBs , SPN DBs, & main switch/ enclosure box of any make and type from the site and making good surface complete all as specified and directed.
Taking down old submain wiring of any size and make from the site and making good surface complete all as specified.
M & L for Point wiring complete with 1.5 sqmm single core PVC insulated FRLS cable 1100 volts grade with multi stranded copper conductor drawn through and including non-metalic rigid new PVC conduit medium grade ISI Marked and all conduit accessories concealed in wall on surface in ceiling/fixed to roof/truss/columns etc and including provision of 1.5 sqmm PVC insulated copper cable FRLS as earth continuty, fabricated modular metal flush box, concealed in walls with suitable modular inner and outer plate for housing switches , socket out let and fan regulators etc, complete all as specified.
(a) One light /Ceiling fan/exhaust fan point controlled by one switch.
(b) One 3 pin 5 Amps socket outlet point controlled by one No one way switch on same board
(c) One 3 pin 5 Amps socket outlet point controlled by one No one way switch on independent board.
M&L point wiring with PVC unsheathed multi stranded copper conductor cable 2.5 sqmm FRLS 1100 Volts in New PVC concealed conduit in new M S steel terminal boxes modular including one run of using 1.5 sqmm FRLS 1100 Volts copper conductor cable as earth continuity connected to common earth for one 15 A switch socket power point, all as specified.
M&L switch Modular type 6 Amps one way 230V AC complete all as specified.
M&L Modular socket outlet 5 pin 6 Amp socket 2 module complete all as specified.
M&L switch Modular type 16 Amps one way 230V AC complete all as specified.
M&L Modular socket outlet 5 pin 6/16 Amp universal socket 2 module complete all as specified.
Supply & Fix Modular five stepped type electronic fan regulator 2 module 230V AC complete all as specified.
M&L ceiling rose 3 phase PVC polycorbonate,isolated body.
M&L for submain wiring with two single core PVC insulated FRLS 1100 Volts unseathed stranded copper conductor cable 6 Sqmm in and including PVC conduit for submain wiring and connection complete including rigid PVC conduit FRLS grade,unsheathed copper conuctor cable of 4 Sqmm size stranded conductor as earthwire.
M & L for earthing complete with galvanized steel earth plate 600x600x6mm thick buried vertically in ground to depth not less than 2.25 mtr below ground level, with top edge of the plate not less than 1.50 mtr below normal ground level, connected to earth lead GI 4mm dia by means of bolts, nuts, check nuts and washers of galvanized iron and connection to main switch board of panel, including watering pipe GI 20 mm bore light grade 15mm bore for earthing lead, wire mess, funnel, salt, charcoal dust, excavation and refilling pit with PCC 1:2:4 type B1(using 20mm dia stone aggregate) reinforced with 6mm dia round bar @ 75mm cement concrete both always with MS handle 12mm dai and frame all as shown in electric plate No 3 in page 497 of SSR Part I (2009) including testing ion completion all as directed .
M&L for earth continuity conductor or main earthing lead fixed to wall on batten or recessed or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc 4 mm dia galvanised or steel wire complete all as specified.
Supply and fix MCB DB SPN 8 way Horizontal, IP - 43 Protection double door 240 V AC 50Hz with for MCB SPN as incomer and SP MCBs as out going with tinned copper bus bar ,neutral link earth link complete.
M&L MCB SPN 40 Amp "C " curve.
M&L MCB SP 6 to 32 Amp "C" curve.
Supply and fix LED batten luminaire surface mounted, 4 feet system wattage of 22 Watts with lifetime of 50000 burning hours with 70% of its initial lumen maintained. CRI>80, Power Factor > 0.95, THD< 10%, colour temperature - 6500K, surge protection 2.5KV in CM, IP-20 protected, meets LED IS specifications, Class - 1, Short circuit and over circuit protection, voltage range - 150 to 270 Volts AC, temperature range 0 to 50 DegreeC, system efficacy at luminarie level > 100 Lumens/watt and including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire from ceiling rose to fitting fixed complete.
Supply and fix 12 watts bulkhead fitting with powder coated die cast aluminium housing with glass/ non yellowing polycarbonate cover, IP65 Protection, System level efficacy of the Luminary is > 100 lm/W with a life class of 50,000 burning hours at L70 criteria, Power Factor >0.95, driver with Voltage range 150-270V, Temperature range 0 to 50 Deg, Driver efficiency >85%, THD<20%, CRI>80, Color Temperature-6500K, Surge protection of 4.0 KV, including connecting up with necessary PVC sheathed 3 core 0.75 Sqmm copper conductor flexible wire fixed complete all as specified and directed.
Supply and fix 45 W High efficient LED Street light fitting with pressure die cast LM6 Aluminum housing and has lenses specially designed for Street Lighting with polycarbonate cover. System level efficacy of the Luminarie is 100lm/W with a life class of 50,000 burning hours at L70. The color temperature is around 6500 K with a color rendering index of 70. The luminaire is IP:66 protected with IK05 impact resistance. It has an electronic driver complaint to IEC safety standards with a power factor>.0.9, voltage variation range 120-270V, THD<20%, High and low protection along with a surge protection of 4 KV including provision of 40mm dia GI light grade pipe1.5 meter length bend to shape and necessary clamps etc for fixing the light fittings on pole fixed complete.
Supply and fix in repairs LED 2 X 2 ft backlite surface mounted fitting 36/40 Watts including connecting up with necessary PVC sheathed 3 core 1.5 Sqmm copper conductor flexible wire fixed complete.
Supply and Fix 100 W High efficient LED Flood light fitting with pressure die cast LM6 Aluminum housing and has lenses specially designed for Street Lighting with polycarbonate cover. System level efficacy of the Luminarie is 100lm/W with a life class of 50,000 burning hours at L70. The color temperature is around 6500 K with a color rendering index of 70. The luminaire is IP:66 protected with IK05 impact resistance. It has an electronic driver complaint to IEC safety standards with a power factor>.0.9, voltage variation range 120-270V, THD<20%, High and low protection along with a surge protection of 4 KV for fixing the light fittings on Wall fixed complete as specified and directed.
Supply & fix in repair factory made epoxy powder coated Distribution Board TPN-4 ways with metal door (IP-43 protection) fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amp copper bus bar, neutral bar, standard DIN rail, Earth bar and cable ties for cable management, top and bottom removeable gland plates with knockouts and suitable for one TPN- MCCB 125/160 Amp as incomer and 40 to 63 Amp SP MCBs outgoing complete all as specified and conforming to IS : 8623.
M&L in replacement MCCB 125 Amps, 16 KA , 4P, 415 Volts, 50Hz , with thermal magnetic setting.
Supply and fixing ceiling fans against BER three blade, Robust and reliable inverter motor (brush less DC Motor) powered by ECM technology, BEE 5 star rating for energy saving, rated Air delivery >220 cum/min, AC single phase 230/240 V of size 1200 mm sweep including making connection with three core flexible, copper cable pvc insulated of suitable length, complete all as directed. Note BLDC Fan should work on existing electronic fan regulator.
Taking down carefully the existing ceiling fan of 1200/1400mm from its position after disconnecting electric connection and making good surface deposits to MES store all as specified and directed.
M&L for submain wiring with two single core PVC insulated FRLS 1100 Volts unseathed stranded copper conductor cable 4 Sqmm in and including new PVC conduit medium grade not less than 20 mm dia, for submain wiring and connection complete FRLS 1100 volts unsheathed stranded copper conuctor cable of 4 Sqmm size stranded conductor as earthwire.
Provn of S &F Wall fan 400 mm 3 blade in replacement sweep metal type including provision of 3 core PVC insulated sheathed 1100 volts grade flexible cable with stranded copper conductor, length as per requirement at site complete all as specified and directed by Engineer-in-Charge.
S&f fresh air fan PVC body air delivery > 800 CMH , 5 number of blades, AC single phase 230/240 V of size 250 mm sweep with louvre fixed complete with suitable size ply by cutting into suitable size as required complete all as specified and directed by Engr-in-Charge.
M&L for breaking the old existing wall and making provn of a round hole for fixing of 300 mm sweep exhaust fan including making good to the disturbed wall/ portion and matching with existing colour.all as specified and directed.
S&F in repair sheet metal enclosure single pole and Neutral with a two pin earth plug and socket complete with a MCB SP 20 Amp 220 volts, 50 Hz, 10KA breaking capacity, including fixing completly in wall with sutable sand and cement, complete all as specified and directed.
S&F for 100mm size butt hinges medium weight cold rolled mild steel complete all as specified and directed
Schedule of Credit
M/S MSD & Associate
m/s VK construction company
R S CONSTRUCTION CO.
ANSH VANSH CONSTRUCTION COMPANY
SHREE RAM BUILD TECH
imran construction company
JYOTI ENTERPRISES
THE LOTUS BUILDTECH
POONAM ENTERPRISES
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .