CERTAIN MISC REPAIR TO BIRD PROOFING NET OF T-7 AND HANGER/BLDG CLADING SHEETS TO T-7, T-8 AND ADJOINING HANGER INCLUDING HANGER PAINTING UNDER GE (AF) TECH AREA, AGRA.

Amount

S&F in repair of galvanized mild steel wire cloth 0.56mm nominal dia of wire and average width of operture 1.18mm and fixed with tinned tacks or galvanished wire stapple/ aluminium fillet, at height upto 20.0 mtr complete all as specified and directed.

S&F anodised aluminium fillets / frame work of any size and any thickness (wt not less than 200 gm / RM), for fixing of wire mesh , at height upto 20 mtr, jointing cleats, screws dash fasteners, plugs for fixing with walls / ceilling etc. complete all as specified and as directed.

Dismantling of Asbestos cement sheeting (corrugated /semi corrugated)/Galvalume sheet in roof covering including ridge. complete all as specified and directed.

S&F Prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,fixed with self taping screws complete all as specified and directed.

S&F Prepainted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in ridge of roof covering/cladding to wall,fixed with self taping screws complete all as specified and directed.

Dismantling of plain or corrugated steel sheeting,any gauge, thickness, including Nainital or similr pattern in roof coverings including ridge complete all as specified and directed.

S&F Galvanised,corrugated/semi corrugated mild steel sheeting 0.63mm thick with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc. with grade of zinc coating 275 complete all as specified and directed.

S&F Plain, galvanised, mild steel sheeting 0.63mm in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified and directed.

Dismantling of wrought iron or mild steel of any description at any position complete all as specified and directed.

S&F rolled mild steel framed work as in doors or gates of angle or other section with gusset plate,rails, braces, etc.,complete, drilling for fixing of steel sheets or other covering, incl distance pieces work confirming to Fe-410-W (Gde-E-250) quality A complete all as specified and directed.

S&F plates (plain or chequrred) , channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and as directed.

M&L for mild steel work in roof trusses,purlins,rafters,wind ties,crane gantries,rails and fastenings and heavy bracket framing (Beam,Tee,Angle,Channel or Flat sections) including distance pieces,cleats etc complete all as specified and directed.

M&L for preparation of new steel surfaces of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified & directed.

M&L for preparation of new steel/zinc/ galvanised surface to receive painting , by coating with mordant solution including washing and cleaning, etc. of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer upto any working height in hangers all as specified and directed.

M&L for preparation of old painted steel/ zinc / galvanised surfaces of any description over 10cm width or girth not otherwise described and applying one coat of Aluminium paint upto any working height in hangers complete all as specified and as directed.

Tightening of screw bolts of any shape and size and in any position (Vertical / Horizontal ) in hangers upto any working height ,including washers etc complete all as specified and as directed. Note:- Nut and bolt will be paid saperately under respected item.

S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other to be fitted with washers and one hexagonal or square nuts, of any size complete all as specified and directed.

S&F in repair PVC (SWR) drain pipes 150 mm dia single socketed in any length with rubber ring joints including fixing/clamping to walls upto any reqd height in hangers complete all as specified and directed.

S&F PVC (SWR) plain bend 150 mm dia, of any radius with rubber ring joints, complete all as specified and as directed

Taking down cement plaster on brick or stone walls, etc. including racking out joints, hacking for key, scrubbing down with water complete all as specified and as directed

M&L for rendering 10 mm thick on brick or concrete surface of walls in cement mortar 1:6 finished even & smooth without extra cement on internal wall surface complete all as specified and directed.

M&L for rendering 15 mm thick on brick or concrete surface of walls in cement mortar 1:4 finished even & smooth without extra cement including mixing only water proofing compound as per manufacturer instruction on external wall complete all as specified and directed. Note:- WPC will be measured & Paid separately

Supply only integral water proofing compound ISI Marked complete all as specified and directed.

M&L for rendering 5 mm thick in cement mortar 1:3 on brick or concrete surfaces on ceiling finished even & smooth without extra cement complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall and applying two coat of oil bound distemper over a coat of primer complete all as specified and directed

M&L for preparation of newly plastered surfaces of wall and applying two coats of exterior emulsion over a coat of primer complete all as specified and directed.

M&L for preparation of newly plastered surfaces of ceiling and applying two coats of whitewash complete all as specified and directed.

M&L for preparation of old decorated surfaces by complete removal of existing treatment of plastered or un-plastered surfaces of walls and applying two coat of distemper oil emulsion white or tinted over a coat of primer complete all as specified and directed.

M&L for preparation of old decorated surfaces by complete removal of existing treatment of plastered or un-plastered surfaces of walls and applying two coats of exterior emulsion over a coat of primer complete all as specified and directed.

M&L for preparation of old decorated surfaces by complete removal of existing treatment of plastered or un-plastered surfaces of ceiling and applying two coats of white wash complete all as specified and directed.

Demolition of cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

Dismantling floor,hearth or wall tiling including cement mortar bedding/backing,removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for 25 mm thick plain cement concrete 1:2:4, type B0 (using 12.5 mm graded stone aggregate) as in flooring levelling course complete all as specified and directed.

M&L for Vitrified ceramic tiles 9 to10 mm thick (Square / rectangular) light shade polished area of each tiles not exceeding 0.36 sqm as in floors etc laid over with and including 15 mm thick screed bed or bedding layer in cement mortar 1:6, set and jointed in neat cement slurry and pointed with coloured cement to match the tiles complete all as specified and directed.

M&L for Vitrified ceramic tiles 9 to10 mm thick (Square / rectangular) light shade polished area of each tile not exceeding 0.36 sqm as in skirting etc laid over with and including backing coat or bedding layer of 10mm thick 1:4 cement mortar for laying wall/vertical finish, jointed in neat cement slurry and pointed with coloured cement to match the tiles complete all as specified and directed.

M&L for Non skid, joint free (edgecut) coloured ceremic tiles 7 to 8 mm thick (Square / rectanguler) polished area of each tile not exeeding 0.09 sqm as in floors etc laid over with and including 15 mm thick screed bed or bedding layer in cement mortar 1:6, set and jointed in neat cement slurry and pointed with coloured cement to match the tiles complete all as specified and directed.

M&L for glazed ceramic coloured tiles 200x300mmx7mm thick on wall/vertical surfaces such as skirting, dados and riser to steps etc laid over with and including10mm thick 1:4 cement mortar for laying wall/vertical finish set and jointed in neat cement slurry and pointed in white or coloured cement to match all complete all as specified and directed.

M&L for 50 mm thick plan cement concrete 1:2:4, type B1 (using 20 mm graded stone aggregate) as in Plinth protection,pathway,steps, flooring surface etc complete all as specified and directed.

GIRENDRA SINGH AND CO

deva engineers

garg construction company

JEE JEE BUILDERS