Construction of rest room and other allied works for the TRB shed at Arasur 230 KVSS

Amount

Earth work excavation for road concrete and Platform concrete in HGS and and depositing on bank with initial lead of 10 m and initial lift of 2 m in Hard stiff clay Stiff black cotton soil, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small size boulders as per standard Specification as directed by the Engineer at site.

Earth work excavation for foundation in HGS and and depositing on bank with initial lead of 10 m and initial lift of 2 m in Hard stiff clay Stiff black cotton soil, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small size boulders as per standard Specification as directed by the Engineer at site.

providing and laying, spreading and compacting graded stone aggregates to wet mix macadam specification including premixing the materials with water at OMC in mechnanical mix plant carriage of mixed material by tipper to site iayying in uniform layers with pavers in sub base / base course on well prepared surface and compacting with vibratory roller too achieve the desired density including cost of materials, labour charges, rentals for machinery, fule and all other incidental charges ect., complete as per clause 406 of MORTH rev-5 --1m3

Plain cement concrete in CC 1:3 :6 using 20 mm HBG metal, including cost of cement, all materials, labour charges including consolidation, curing, all leads, lifts, as per standard specification etc., complete.

Plain cement concrete in CC 1:2 :4 using 20mm HBG metal with out form work, including cost of cement, all materials, labour charges including consolidation, curing, all leads, lifts, as per standard specification etc., complete.

Supplying and erecting centering for sides and soffits including necessary supports and strutting upto 3.29 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at abote 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc. complete complying with the standard specificaiton. (Payment for centering shall be given after the concrete is laid)

Brick work in CM 1:3 using II class chamber burnt bricks for partition wall, including cost of all materials, all labour charges, lead, lift, etc. complete.

Brick work in CM 1:5 using II class chamber burnt bricks for partition wall, including cost of all materials, all labour charges, lead, lift, etc. complete.

RCC 1:1.5:3 using 12 to 20mm HBG metal for matt concrete including cost of cement, all materials, labour, lead, lift, steel shuttering, vibration etc., complete (but excluding cost of steel reinforcement)

RCC 1:1.5:3 using 12 to 20mm HBG metal for Colums below groud level including cost of cement, all materials, steel shuttering arrangements ,curing, vibration, labour, lead, lift etc., complete (but excluding cost of steel reinforcement)

RCC 1:1.5:3 using 12 to 20mm HBG metal for grade beam and plinth beam including cost of cement, all materials, steel shuttering, curing, vibration including cost of all materials, labour, lead, lift etc., complete (but excluding cost of steel reinforcement)

RCC 1:1.5:3 using 12 to 20mm HBG metal for lintel including cost of cement, all materials, curing, vibration, steel shuttering, labour, lead, lift etc., complete (but excluding cost of steel reinforcement)

RCC 1:1.5:3 using 12 to 20mm HBG metal for sunshade 600mm width 80mm thick at wall end, 50mm thick at free end including cost of cement, all materials, curing, vibration, steel shuttering , labour, lead, lift etc., complete (but excluding cost of steel reinforcement)

RCC 1:1.5:3 using 12 to 20mm HBG metal for 130mm thick roof slab including cost of cement, all materials, curing, vibration, steel shuttering, labour, lead, lift etc., complete (but excluding cost of steel reinforcement)

RCC 1:1.5:3 using 12 to 20mm HBG metal for precast slab including cost of cement, all materials, curing, vibration, steel shuttering, labour, lead, lift etc., complete (but excluding cost of steel reinforcement)

Providing steel reinforcement MS/RTS rods up to 16 mm dia for reinforced concrete works, including cost of steel MS/RTS rods, binding wire, labour charges for cutting, straightening bending as per type design drawing, placing aligning, and tying properly with all leads and lift as per standard specification, etc., complete

Plastering with cm 1:3, 12mm thick for wall and slab including cost of cement, all materials,curing, labour, lead and lift etc., complete.

Plastering with CM 1:5 12 mm thick for Wall surface including cost of cement, all materials, labour, curing, leads and lifts etc., complete.

Colour washing with two coats using Interior emulsion over one coat of primer including through scrapping, clan removal of dirt, cost of all materials, labour, Lead, Lift etc., complete

Painting two coats of newly plastered wall surface with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification.For Exterier

White washing two coat (priming coat) shell based white cement of approved quality and of reputed make (Kottaiyam, Birla.Jk, and the like over cement plastered wall surfaces and ceiling including preparing surface curing etc., complete-10M2

Dadooding walls with approved quality of glazed tiles, size and design (johnson or equivalent make) laid in cement mortar 1:2 -10mm thick including pointing with same coloured cement using 0.4kg/sqm, finishing the jointsand pointing flush with the surface , including cost of all materials, labour, lead, lift, etc. complete.

Supplying and laying of non-slippery tiles glazed tiles, size and design (johnson or equivalent make) laid in cement mortar 1:2 -10mm thick including pointing with same coloured cement using 0.4kg/sqm, finishing the jointsand pointing flush with the surface , including cost of all materials, labour, lead, lift, etc. complete.

Supplying and fixing white Indian type Water Closet Parry ware or equivalent type with "P" or "S" type Trap with double flapped seat cover with Brass Hinges and 12.5 Ltr capacity porcalin low level flushing tank with all internal fittings 20" with brick jelly concrete 32:12:5 using 20mm hard broken brick jelly finishing the top to required shape etc., including cost of all materials labour, lead ,lift, etc., complete, as per standard specification ,.

Supplying and fixing of cast iron man hole cover size 60x60cm cover of heay duty including cost of all materials labour, lead ,lift, etc., complete, as per standard specification ,.

Providing sewage line with 110mm Dia PVC pipe 6 Kg/CM2 including all specials including cost of all materials labour, lead ,lift, etc., complete, as per standard specification ,.

Providing and laying 25 mm dia PVC high density 10 ksc pipe including cost of all materials, labour, etc., complete.

Supplying and fixing in position of 25mm dia gun metal gate valve leader make of best quality including cost of materials lead lift labour etc complete.as directed by department Engineer at site

Providing fixing of Brass Chromium palted 15/12mm screw down bib cock (Heavy Duty) water supply tap including cost of pipe and labour fixing charges lead, lift, etc., complete, as per standard specification.

Providing Expansion joints with Bitumen Pad with100 mm depth and 6 mm thick including labour,materials ,lead ,lift, etc,complete.

Supplying and fixing of CI Nahini Trap 100 x 75mm with stainless steel gratingsincluding all specials including cost of all materials labour, lead ,lift, etc., complete, as per standard specification ,.

Supply and fixing of wash basin of size 560x410mm white and of approved quality and make[Parryware or equivalent] with 12/15mm dia PVC pillar tap [water tec], 32mm PVC waste pipe, 12/15mm PVC angle cock [Water tec], 15mm PVC nipple, 15mm nylon connection tube [Watertec /Kohinoor] etc. fixing the basin in the wall with GI/Alu. brackets and rag bolt and nut, giving necessary water connection etc., and mirror with beveled edge fixed with suitable CP brass screws etc., complete.

Supplying and fixing in position White glazed Flat back urinal - Size 455 x 350mm of approved make and quality [Parryware -Aquaseal urinal or equivalent] and with PVC pipe connection [Kohinoor], 32mm PVC waste pipe [Kohinoor], 12/15mm PVC Angle valve ISI, fixing the urinal to the valve with necessary TW plugs, brass screws etc, connecting to the water main as directed at site including the cost of all materials abour, lead, lift, T&P etc. complete.

Supply and fixing of UPVC ( Un-Plasticized polyvinyl chloride) louvered Ventilator of 0.75 x0.45m, with the outer frame profile of size 60 mm x 58 mm and shutter profile size of 60 x 78 mm are reinforced with GI / 1 mm 125 GSM and 100% corrosion free the profile are multi chambered sections with wall thickness of 2 mm, the EPDM rubber (Black colour) covered with all over the edges of frame and shutter. the corners and joints should be welded and cleaned radiations pin headed glass 4 mm thick should be provided in the louvers. the window should bne fixed to the wall 100% packing with screws and silicon packing all round the frames, the ventilator should be got approved from the executive engineer before use on work. including cost of all materials lead lifts labour etc complete.

Supply and fixing of Solid PVC door shutters using 19 gauge 19mm MS square tubes and outer frames. 15 mm square tubes for top, lock and bottom rails. The steel tubes shall be covered with 5mm solid thick sheet. The shutters using 5mm thick solid PVC sheets for panelling including necessary furniture and fittings including cost of all materials lead lift etc., complete.

Fabrication, supplying and fixing of MS framed single leaf with GI sheet 18 gauge Door using MS angle 40x40x6mm for door frame and MS angle 35x35x5mm for shutter frame with necessary stiffeners using MS flats of size 19x5mm including painting with two coats of enamal paint over one coat of red oxide paint including cost of all materilas, labour, lead, lift etc, complete.

Wiring with 2 x 1.50 sq mm PVC unsheathed multistrand copper cable of 1100 V grade …. for PVC concealed light and fan point. etc. complete, as per standard specification ,

Supplying and fixing of 4ft 1x20W single box type slim LED light fittings-Philipps complete with ISI mark,etc. complete, as per standard specification ,

Supply and fixing of W.T bulk head fitting (Philips / Bajaj / K.Lite / Crompton Greaves) suitable for LED lamp with guard and 1No 20 W LED bulb.

Supplying and laying of 4 core 16 Sqmm copper PVC armoured LTUG cable including cost of cable, lead, lift, labour charge, etc., complete.

Providing low back Executive Revolving chair for EE office at TRB including cost of , lead, lift, labour charge, etc., complete.Arasur

Providing Dispersion trench including cost of earth work ,filling 40mm metal,all leads lift etc complete of size 2.00 x 1.50 x 2.50 m

SGST to be quoted in Percentage (value alone)Ex. 9%, it should be entered as 9 only

CGST to be quoted in Percentage (value alone)Ex. 9%, it should be entered as 9 only

Inter-state GST @18% for other than Tamil Nadu supplier. If the contractor is within Tamil Nadu may be quoted as "0" only