Repairing of Road

Amount

Earth work in embankment by power transported earth with a lead beyond 200meter and upto 1.0 km.i/c excavation,loading unloading,mannual compaction,dressing and all lifts complete excluding royalty will be applicable from time to time on Govt. orders

Brick Edging on both side of the road of M-150 bricks 7 cm. wide , 11 cm. deep , laid with mud mortar i/c labour & supply of bricks finished to the required template and in proper alignmemt and also including dressing and ramming the excavated earth as directed by the engineer - in - charge .

Construction of granular sub-base (GSB) by providing close graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compactig with vibratory roller to achieve desired density, complete as per Clause 401 close graded material.

Providing, laying, Spreading and compacting machine crushed stone ballast of approved Quarry of 63 - 45 mm size to WBM of G- 2 specification including spreading in uniform thickness, hand packing, rolling with power roller 8-10 tone in stages to proper grade and camber, applying and brooming, crushable screening material i,e stone dust to fill-up the interstices of coarse aggregate, watering, and compacting to the required density i/c cost of all materials,T&P as per MORD Specification Clause 404 (ByManual Means)

Providing, laying, Spreading and compacting machine crushed stone ballast of approved Quarry of 53-22.4 mm size to WBM of G-3 specification including spreading in uniform thickness, hand packing, rolling with power roller 8-10 tone in stages to proper grade and camber, applying and brooming, crushable screening material i,e stone dust to fill-up the interstices of coarse aggregate, watering, and compacting to the required density i/c cost of all materials,T&P as per MORD Specification Clause 404 (ByManual Means)

Providing & applying primer coat with bitumen emulsion on prepared surface of granular base including cleaning of road surface spraying primer @ 0.60 kg/sqm. Using mechanical means as per MORD technical specification Clause - 502

Providing & applying tack coat with Bitmen emulsion V.G-10 using emulsion pressure distributor at the rate of 0.20 kg per sqm on the prepared granular surface cleaned with Machenical Broom as per MORD technical specification Clause-503

Providing laying & rolling of open graded premix carpet of 20mm thickness composesdof 13.2 mm to 5.6 mm Aggregate using VG-10 grade Bitumen to required line, grade & level to serve as wearing coarse on a previously base as per MORD Specification no.- 508

Providing and laying seal coat by manual means with VG - 10 bitumen sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using type C as per Technical specification Clause-510

M/S RAJ CONSTRUCTION CO.

Raja contractors & engineers

Santosh Kumar Sharma

M/S FAROOQ KHAN

M/S Rakesh Kumar Contractor