Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹32.8 LAccepted-AOC | L1 | Accepted-AOC ACCEPTED BEING LOWEST BIDDER | |
| 2 | L2₹38.4 L+₹5.6 L (17.0%)Rejected-Finance | L2 | Rejected-Finance REJECTED BEING NOT LOWEST BIDDER |
Tender Value
₹42.8 L
EMD Value
₹85,540
Closing Date
30 Dec 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE KHADKI
Headquarters CWE Khadki, Military Engineer Services, Range Hills Road, Khadki, Pune-411003
PROVISION OF SECURITY GATES GUARD ROOM AND TOILET ALONGWITH ALLIED SERVICES AT NANDA ROAD GATE OF BEG AND CENTRE KHADKI UNDER GE CENTRAL KHADKI
2023_MES_630517_1
CWE/KKE/TOKEN-70 OF 2023-24
Open Tender
Civil Works
Item Rate
180 days
BEG AND CENTRE area
AS PER TENDER
6 documents required · 6 mandatory
₹500
GE CENTRAL KHADKI
₹85,540
Yes
15 Mar 2024
30 Nov 2023
6 Jan 2024
30 Nov 2023
30 Dec 2023
16 Dec 2023
1 Dec 2023 - 8 Dec 2023
Amount
Surface excavation n.exc 30 cm deep and avg 15 cm deep and getting out soft and loose soil complete all as specified and as directed by the Engineer-in-Charge.
Surface excavation n.exc 30 cm deep and avg 15cm deep & getting out in hard / dense soil complete all as specified and as directed by the Engineer-in-Charge.
Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth, for foundation, laying of pipes, cables etc or for shafts, wells, cessfills, manhole etc 10 Sqm on plan and getting out in soft / loose soil complete all as specified and as directed by the Engineer-in-Charge.
Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth, for foundation, laying of pipes, cables etc or for shafts, wells, cessfills, manhole etc 10 Sqm on plan and getting out in hard / dense soil complete all as specified and as directed by the Engineer-in-Charge.
Returning, filling in, including spreading, levelling, waterting and wall ramming in layers not exc 25cm complete all as specified and as directed by the Engineer-in-Charge.
Removing excavated material n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and as directed by the Engineer-in-Charge.
M & L for plain cement concrete type D- 2, 1:4:8 (40mm graded aggregate) as in foundation, filling & mass concrete complete all as specified and as directed by the Engineer-in-Charge.
M & L for RCC Design mix M-25 (using 20mm graded stone aggregate) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, coping beam, band etc; basement slabs, under-reamed piles and mass concrete and finishing complete all as specified and as directed by Eng-In-Charge.
M&L for RCC M-25 (design mix) using 20mm graded crushed stone aggregate in Columns, pillars, piers, posts and struts complete all as specified and as directed by the Engineer-in-Charge.
M&L for RCC M-25 using 20mm graded stone aggregate, design mix in roof slabs, supported on walls, beams and columns complete all as specified and directed.
M&L for RCC M-25 (design mix) using 20mm graded crushed stone aggregate as in chajjas complete all as specified and as directed by the Engineer-in-Charge.
M&L for RCC M-25 (design mix) using 20mm graded crushed stone aggregate in lintels / lintels bands complete all as specified and as directed by the Engineer-in-Charge.
M&L for RCC 1:3:6 type C1 as in lintel n.exc 1.5m, hold fasts, bed blocks etc. complete all as specified and as directed by the Engineer-in-Charge.
M&L for brick work with flyash brick, stright or curved on plan exc 6m mean radious, built in cement mortar 1:4 complete all as specified and as directed by the Engineer-in-Charge.
M&L for form work to sides of concrete as in foundations, footings, bases of column, raft and raft beams, plinth beams and similar works complete all as specified and as directed by the Engineer-in-Charge.
Form to soffits of suspended slabs such as roof slab ,chajjas including edges not exceeding 200mm thick.
M&L for form work to sides of columns rough finished surfaces of concrete flat, rectangular or polygonal complete all as specified and as directed by the Engineer-in-Charge.
M&L for form work to sides of roof beams / lintels beams as in RCC bands and soffit of suspended slabs rough finishes of concrete flat complete all as specified and as directed by the Engineer-in-Charge.
S & F plain, framed factory made panelled door shutters approved quality second class hard wood 35mm thick (two panels) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered partical board with commercial veneering on both faces The size of rail and style as per IS 1003(part-I) kiln seasoned and chemically pressure treated, fixed with screws etc, complete all as specified and as directed by the Engineer-in-Charge.
Factory Made with Wood Free EPS Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site complete all as specified and as directed by the Engineer-in-Charge.
S&F for PVC door frame of size 50mm x 47mm nade out of 5mm plain colour PVC sheet refinforced with M.S. Square tube, supplying & fixing in opening complete all as specified and as directed by the Engineer-in-Charge.
S&F for sceond class hardwood glazed and skelton shutters 35mm thick open rebated and prepared to receive glass, gauze, etc, (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc; sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a), supplied and fitted to chowkats complete all as specified and as directed by the Engineer-in-Charge.
S&F for MS butt hinges, medium weight, cold rolled mild steel 100mm long complete all as specified and as directed by the Engineer-in-Charge.
S&F for MS tower bolts 200mm long, stove enamelled black, with bright bolt and fixed (black japan) complete all as specified and as directed by the Engineer-in-Charge.
S&F for mild steel sliding door bolts 250mm long, plate type, stove enammelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 blolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and as directed by the Engineer-in-Charge.
S&F for mild steel pressed handles 150mm long, oval type, stove eanameld balck concrete flat complete all as specified and as directed by the Engineer-in-Charge.
S&F for door stopper of aluminium alloy body and tongue 140mm long, anodised, with hard drawn steel spring, fixed in floor complete all as specified and as directed by the Engineer-in-Charge.
S&F for 300mm long ordinary MS rat tail rod pattern springs, including roller and roller plate complete complete all as specified and as directed by the Engineer-in-Charge.
S&F for aluminium, anodised, barrel tower bolts 150mm long of extruded section complete all as specified and as directed by the Engineer-in-Charge.
S&F for extruded aluminium alloy handles 125mm long, fabricated type, anodised complete all as specified and as directed by the Engineer-in-Charge.
S & F Pressed steel door frame of size 125 x 60mm and 1.25mm thickness for doors with double rebate incl necessary fixing lugs, hinges lock strike plate, etc complete all as specified and as directed by the Engineer-in-Charge.
S & F for factory made UPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multi chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made complete all as specified and as directed by the Engineer-in-Charge.
S & F for factory made UPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Glass shall be paid separately). Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.
S&F for Ggalvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperature 1.24mm and fixed with tinned tacks, or galvanised wire staplesconcrete flat complete all as specified and as directed by the Engineer-in-Charge.
M & L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed by the Engineer-in-Charge.
M & L for mild steel TMT bars 6mm dia to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed by the Engineer-in-Charge.
All as per item No. 38 above but 5mm dia and over upto and including 10mm dia in stirupps, spacers and binders complete all as specified and as directed by the Engineer-in-Charge.
M & L for mooram filling in floors or pavings, laid in layers n exc 15cm thick, spread, levelled and rammed including watering complete all as specified and directed.
M&L for hardcore of broken stone or boulders of gauge n.exc 63mm, deposited, spread and levelled in layers n.exc 15cm thick, watered and rammed to a true surface.
M&L for 75mm thick cement concrete type D- 2, 1:4:8 (40mm graded aggregate) as in sub base complete all as specified and directed.
M & L for 40mm thick cement concrete type B-1, 1:2:4 using 20mm graded crushed stone aggregate finishing even and smoth using extra cement complete all as specified and as directed by the Engineer-in-Charge.
M&L for glass dividing strip 38mm wide x 3mm thick complete all as specified and as directed by the Engineer-in-Charge.
M & L for 25mm thick plain cement concrete type B-0, 1:2:4 using 12.5mm graded crushed stone aggregate as in floors finished even and fair without using extra cement complete all as specified and as directed by the Engineer-in-Charge.
M & L for non skid coloured ceramic tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick cement screed in CM 1:6 complete all as specified and as directed by the Engineer-in-Charge.
M&L for Dark Shade Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick cm v
M & L for glazed ceramic tiles in vertical surface 350x 250x 7 mm / 450X 350X 7 mm thick set and jointed in neat cemen slurry and pointed in white or colour cement to match 10mm thick backing layer in CM 1:4 complete all as specified and as directed by the Engineer-in-Charge.
M&L for 10 mm thick rendering on fair faces of brick / concrete surfaces in CM 1:3 as in skirting finishing even and smooth without using extra cement complete all as specified
M & L for 15mm thick rendering in CM 1:4 finishing the surfaces even and smooth without using extra cement on fair faces of brick work with using water proofing compound as per manufacturers instructions all as specified (WPC shall be measured and paid seprately) complete all as specified and as directed by the Engineer-in-Charge.
M & L for 15mm thick rendering in CM 1:4 finishing the surfaces even and smooth without using extra cement on fair faces of brick work complete all as specified and as directed by the Engineer-in-Charge.
M&L for 10 mm thick rendering on fair faces of brick / concrete surfaces in CM 1:6 finishing even and smooth without using extra cement complete all as specified and as directed by the Engineer-in-Charge.
M&L for 5 mm thick rendering on fair faces of brick / concrete surfaces in CM 1:3 finishing even and smooth without using extra cement complete all as specified and as directed by the Engineer-in-Charge.
Supply only water proofing compound all as specified and directed.
M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and as directed by the Engineer-in-Charge.
M&L for Providing and applying plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth complete all as specified and as directed by the Engineer-in-Charge.
M & L for preparation of new plastered surfaces on wall and applying two coats of oil bound distemper complete all as specified and directed.
M & L for preparation of new plastered surfaces on ceiling and applying three coats of white washcomplete all as specified and as directed by the Engineer-in-Charge.
M & L for preparation of new plastered surfaces on ceiling and applying two coat of cement based paint over a coat of primer complete all as specified and as directed by the Engineer-in-Charge.
S&F for sheet glass plain ordinary quality 3mm thick and glazzing oil putty in square n.exc 0.5 sqm in each pane complete all as specified and as directed by the Engineer-in-Charge.
M&L for preparation of new or previously untreated wooden surfaces and applying two coats of synthetic enamel paint over one coat of pink primer of any description, not otherwise described, over 10 cm width or girth complete all as specified and as directed by the Engineer-in-Charge.
M&L for preparation of new or previously untreated steel surfaces and applying two coats of synthetic enamel paint over one coat of red oxide primer of any description, not otherwise described, over 10 cm width or girth complete all as specified and as directed by the Engineer-in-Charge.
M&L for 75mm thick PCC 1:3:6 type C2 using 40mm graded coarse aggregate in subbase and plinth protection complete all as specified and as directed by the Engineer-in-Charge.
S&F tubes 15mm bore medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floor etc complete all as specified and as directed by the Engineer-in-Charge.
S&F for low density polyethelane pipes (LDPE) of pressure rating 6 kgf/cm2 40mm bore fixed to well, celing or floor complete all as specified and as directed by the Engineer-in-Charge.
S & Fof rotational moulded polyethylene water storage tanks 1000 litres capacity (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and as directed by the Engineer-in-Charge.
S&F for bib taps cast copper alloy 15mm bore with crutch or butterfly handle, screwed for iron pipe or for brass ferrule and fixed.
S & F in repair 15 mm bore Pillar taps, cast copper alloy fancy type, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and as directed.
S&F 15mm for stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed by the Engineer-in-Charge.
S&F for gun metal globe or gate valves with iron wheel head, screwed both ends for iron pipe 15mm bore complete all as specified and as directed by the Engineer-in-Charge.
S&F for brass valves, high pressure, with ploythene float and flynut complete, screwed for iron pipe or brass ferrule 15 mm bore complete all as specified and as directed by the Engineer-in-Charge.
S&F for 32mm bore waste fitting brass CP or glazed ware WHBcomplete all as specified and as directed by the Engineer-in-Charge.
S&F for PVC conncetion 15mm size with PTMT nuts of length 450mm long.
S&F for urinal spreader brass CP, for fixing 15mm bore pipecomplete all as specified and as directed by the Engineer-in-Charge.
S&F for 110mm dia PVC (SWR) pipe single socketed in any length with rubber ring joints laid in trenches, floor and wall including taking down old unserviceable pipe any description and any type complete all as specified and as directed by the Engineer-in-Charge.
S&F for PVC (SWR) pipes single socketed in any length with rubbering joints laid in trenches or in floors wall 75mm bore including taking down old unserviceable pipe any description and any type complete all as specified and as directed by the Engineer-in-Charge.
S&F for PVC (SWR) bends 75mm dia bore any radius with access door complete all as specified and as directed by the Engineer-in-Charge.
S&F for PVC (SWR) branch piece, single 'Y' 110mm dia equal or unequal complete all as specified and as directed by the Engineer-in-Charge.
S&F for PVC (SWR) branch piece, single 'Y' 75mm dia equal or unequal complete all as specified and as directed by the Engineer-in-Charge.
S&F for 75mm bore PVC (SWR) junction single (Single T) equal or unequal complete all as specified and as directed by the Engineer-in-Charge.
S&F for 110mm bore PVC (SWR) junction single (SingleT) equal or unequal
S&F for 110mm bore PVC (SWR) vent cowl complete all as specified and as directed by the Engineer-in-Charge.
S&F for 75mm bore PVC (SWR) vent cowl complete all as specified and as directed by the Engineer-in-Charge.
S&F PVC (SWR) for floor trap with grating, 75mm bore outlet incl joint to waste pipe fixed in concrete type B1 (1:2:4) complete all as specified and as directed by the Engineer-in-Charge.
S&F for salt glazed stone ware gully trap square or round mouthed,type 'P' size 150x150mm complete all as specified and as directed by the Engineer-in-Charge.
S & F in repair vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests including PVC(SWR) 'P' or 'S' trap connecting to flush pipe and to anti syphonage pipe,complete all as specified and as directed by the Engineer-in-Charge.
S&F for vitreous china bowl urinal flat back size, 465x355x265mm white with grating complete all as specified and as directed by the Engineer-in-Charge.
S&F Wash hand basin, flat back 550x400mm vitreous china (white) including PTMT waste fittings, 32mm bore size, waste pipe, PVC, 32mm bore, angle iron/cast iron brackets of required size as directed & making good disturbed surfaces to match with the existing as in repair completed all as specified and directed by Engr-in-charge.
S&F for brass CP shower rore with swivel joint 125mm dia fixed to steel pipe 15mm borecomplete all as specified and as directed by the Engineer-in-Charge.
S & F in repair Vitreous china wash basin white flat back size 580x450 mm excluding taps but including 32 mm dia CP waste fitting and PVC waste pipe 610 mm long and brackets complete all as specified and as directed by the Engineer-in-Charge.
S&F for CP grating for 75mm bore flow trap complete all as specified and as directed by the Engineer-in-Charge.
S&F for CP grating for 100mm bore Nahani trap
S&F for vitreous china urinal partition white of size 310x770mmcomplete all as specified and as directed by the Engineer-in-Charge.
M&L for pre cast cement concrete solid block mansonary with soild block of the grade C1 (1:3:6) set in CM 1:6 complete all as specified and directed complete all as specified and as directed by the Engineer-in-Charge.
M&L for PCC 1:3:6 type C2 using 40mm graded aggregate as in foundation of manholes filling and mass concrete complete all as specified.
M&L for PCC 1:3:6 type C1 using 20mm graded aggregate as in copings complete all as specified.
M&L for PCC 1:2:4 type B1 as in benching of man holes finishing even and smooth without using extra cement complete all as specified and as directed by the Engineer-in-Charge.
M&L for extra for forming fair finished to surface drain / channel 30cm inner girth complete all as specified and as directed by the Engineer-in-Charge.
M&L for precast RCC 1:2:4 type B1 using 20 mm graded crushed stone aggregates as in cover slab set in CM 1:6.
S&F for SGSW pipes 150mm internal dia laid in trenches and jointed in CM 1:2 and all as specified.
M&L for PCC 1:4:8 type D2 as in concrete bed to 150mm dia drain pipes incl packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and as directed by the Engineer-in-Charge.
M&L for septick tank for 25 users incl excavation in hard / dense soil, foundation in PCC 1:2:4, PCC precast block masonary in CM 1:4, RCC slab covers incl RCC pre-cast man hole cover haivng fibre reinforced cover with angle iron frame, vent shafts and sludge chambber etc. and all as per CEPZ TD drg No:CEPZ/88/TD/17M sheet 1/4 to 4/3 dt 01 Oct 1988 complete all as specified and as directed by the Engineer-in-Charge.
M&L for soakage well incl excavation, in hard soil, foundation in PCC 1:3:6, wells of Honey combed and soild in M-25 concrete, including intercepting chmaber, screen chamber brick work in CM precast PCC block masonary in CM , / RR masonry / Filling with 1:4, RCC cover slab in M-25 and filling with brick beds or stone boulders size of soakage well 2.4m dia x 3.m deep and all as per CEPZ TD No-CEPZ/88/TD/19M sheet 1/1 dt 01 Oct 1988 (R) 07 Jun 2003 complete all as specified and as directed by the Engineer-in-Charge.
M & L for brick work with old size fly ash bricks straight or curved on plan exceeding 6 m meán radius and built in CM (1:6) complete all as specified and directed.
M&L Framed work such as grills, frame works in gates, etc ,with ends of bars shouldered and/or reveted ,or forged into spikes;framed guard bars ;barred iron doors;ladders;framed balusters;walk ways;railings,frame work of water tanks;and similar works conforming to F.290.Gde-E-165. complete all as specified and as directed by the Engineer-in-Charge.
M&L for cast iron work grade FE-150 machined, in pulleys, arrows, flowers and similar articles n.exc 5Kg each all specified and directed.
S&F mild steel work as in hold fasts and similar work confirming to Fe-290 Gde E-165 complete all as specified and as directed by the Engineer-in-Charge.
S & F and laying in trenches/fixed to wall galvanised steel water tubing 50 mm bore, medium grade with and including all medium grade fitting complete all as specified and directed.
S&F for GI tubing light grade 40mm bore,on pole /wall with necessary clamps,nuts,bolts and washers/under road cross ISI marked, for cable protection complete all as specified and as directed by the Engineer-in-Charge.
S & F and laying in trenches/fixed to wall galvanised steel water tubing 25 mm bore, medium grade with and including all medium grade fitting complete all as specified and directed.
S & F gun metal gate valve with iron wheel head, screwed both ends for iron pipes 50 mm bore complete all as specified and directed.
S & F gun metal gate valve with iron wheel head, screwed both ends for iron pipes 25 mm bore complete all as specified and directed.
M&L for cutting and welding of exisiting CI/GI pipe in trenches for fixing/inserting of valve, bends,double socket, Tee pieces, single branch, Y junction etc upto 100 mm size of pipe complete by using necessary cutting material such as gas cutter etc comple all as directed by Engr-in-Charge.
EM PORTION M & L for concealed point wiring with two single core PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 1.5 sqmm (Nominal area) drawn in and including PVC conduit of medium grade of required size with all fittings and accessories alongwith one single core green colour PVC insulated 1100 volt grade multi stranded FRLSH Copper conductor cable of size 1.5 sqmm as earth lead and connected to earth dolly for one light point or one fan point or one call bell point controlled by one, one way switch including 3mm thick hylam sheet screwed with 04 nos cadmium coated screws & cup washer with MS concealled box for mounting of switch, regulators or bell push and casing caping terminal box for mounting ceiling rose/ holders etc all as specified and directed.
M & L for concealed point wiring with two single core PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 1.5 sqmm (Nominal area) drawn in and including PVC conduit of medium grade of required size with all fittings and accessories alongwith one single core green colour PVC insulated 1100 volt grade multi stranded FRLSH Copper conductor cable of size 1.5 sqmm as earth lead and connected to earth dolly for same board controlled by one, one way switch including 3mm thick hylam sheet screwed with 04 nos cadmium coated screws & cup washer with MS concealled box for mounting of switch, regulators or bell push and casing caping terminal box for mounting ceiling rose/ holders etc all as specified and directed.
M & L for concealed point wiring with two single core PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 1.5 sqmm (Nominal area) drawn in and including PVC conduit of medium grade of required size with all fittings and accessories alongwith one single core green colour PVC insulated 1100 volt grade multi stranded FRLSH Copper conductor cable of size 1.5 sqmm as earth lead and connected to earth dolly for one 6 amps socket point independent including 3mm thick hylam sheet screwed with 04 nos cadmium coated screws & cup washer with MS concealled box for mounting of switch, regulators or bell push and casing caping terminal box for mounting ceiling rose/ holders etc all as specified and directed.
M & L for concealed point wiring with two single core PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 1.5 sqmm (Nominal area) drawn in and including PVC conduit of medium grade of required size with all fittings and accessories alongwith one single core green colour PVC insulated 1100 volt grade multi stranded FRLSH Copper conductor cable of size 1.5 sqmm as earth lead and connected to earth dolly for one 16 amps socket (Power) point independent including 3mm thick hylam sheet screwed with 04 nos cadmium coated screws & cup washer with MS concealled box for mounting of switch, regulators or bell push and casing caping terminal box for mounting ceiling rose/ holders etc all as specified and directed.
M & L for concealed submain wiring with two single core PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 1.5 sqmm (Nominal area) drawn through in and including PVC casing caping/PVC conduit size with all fittings and accessories alongwith one single core green colour PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 1.5 sqmm as earth lead and connected to earth dolly and making good to disturbed surfaces all as specified and directed. NOTE: (a) Two run of cable with one run of earth wire and one run of casing capping/conduit will be measured as one length.
All as per item No 128 here-in-before but cable of size 4.0 sqmm all as specified and directed.
S & F for switch 6 amps flush type one way single pole all as specified and as directed
S & F for ceiling rose 3 terminal PVC insulated bodyall as specified and as directed
S&F socket flush type 6 amps, 5 pin, 230v all as specified and as directed
S&F switch socket combination multipurpose 2-in-1 flush type 3 pin 16 amps and 3 pin 6 amps, 230v all as specified and as directed
S&F lamp Holder insulated body with back plate all as specified and as directed
S&F flush type electronic fan regulator with 5 step type,120 W, AC 240 Volts, 50 Hz incl dismentling taking down unsv one all as specified and as directed.
S&F LED lamp 12 watt, CDL, B-22 cap, (Pin type), 230V, PF-0.95 (min) Make- CG cat part No LED12WDFWB or equivalent to Wipro/ Bajaj complete all as specified and as directed by the Engineer-in-Charge.
S&F MCB, Single Pole, 6 to 32 amps, 240 Volts, 10 KA breaking cap, ‘’C” curve all as specified and directed. MAKE- Cat Part No- 4085-87 to 4085-95 of Legrand or equivalent of Schneider/ABB complete all as specified and as directed by the Engineer-in-Charge.
S&F MCB, Double Pole, 6 to 32 amps, 415 Volts, 10 KA breaking cap, ‘’C” curve all as specified and directed. MAKE- Cat Part No- 4086-28 to 4086-36 of Legrand or equivalent of Schneider/ABB complete all as specified and as directed by the Engineer-in-Charge.
S&F MCB distribution board,Double door, metal enclosure, SPN, 230 Volts,8 way all as specified and directed. MAKE- Cat Part No- 5076 10 of Legrand or equivalent of Schneider/ABB complete all as specified and as directed by the Engineer-in-Charge.
S&F LED batten fitting, 20 watt, CDL, 230 Volts, 4 feet long , complete with all accssories internally pre wired and including connecting up to ceiling rose with 0.5 sqmm twin core copper flexible conductor cable incl LED lamp and mounting casing box 2 nos all as specified and directed. Make-CG, Cat Part No CCS-100-20-65-HL2-DP-NWH or equivalemt in Bajaj/Havells/Philips complete all as specified and as directed by the Engineer-in-Charge.
S&F LED batten fitting ' 2'long, 10 watt,CDL 230 Volts , complete with all accssories internally pre wired and including connecting up to ceiling rose with 0.5 sqmm two core copper flexible conductor cable with mounting casing box 2 nos all as specified and directed. Make-CG Cat Part No- CCS-103-10-65-HL2-DP-NWH or equivalemt in Bajaj/Philips/Havells complete all as specified and as directed by the Engineer-in-Charge.
S&F LED building security light 25 watt, 230V with lens and toughen glass top complete PF > 0.95 with all accessories and including connecting up to ceiling rose with 0.5 sqmm three core copper flexible conductor cable, One GI medium grade 20/25 mm dia bracket of total length 50 cm and fixed to wall with 2 Nos MS Clamp and fastener all as specified and directed. Make- CG Cat Part No LSTS--25-CDL-M or equivalent in /Wipro/Havells/Bajaj complete all as specified and as directed by the Engineer-in-Charge.
S&F of LED post top lantern 20 watt complete with 40/50 mm GI Pipe Light grade,clamps,nut,bolt and washers, incl 1.5 sqmm two core copper flexible conductor cable all as specified and directed. Make: Crompton Cat part No LPTH-20-WW or equivalent Philips, Wipro complete all as specified and as directed by the Engineer-in-Charge.
S&F of LED bush light 12 watt with die cat aluminium housing with touhgened glass IP 66 incl 1.5 sqmm two core copper flexible conductor cable incl all as specified and directed. Make: Helonix Cat Part No HLOBUL-27-12CW
S&F of LED Spike light with ie cast aluminium housing with to 2 watt with die cat aluminium housing with touhgened glass IP 66 incl 1.5 sqmm two core copper flexible conductor cable incl all as specified and directed. Make: Helonix Cat Part No HLOSPL-27-12-CW
Supply and fixing Exhaust fan 200 mm in sweep (Steel body) 230/240 volt AC complete with all acessories including making connection by using flexible wire of size 0.50 sqmm 3 core and making holes, grouting nut bolts in wall for exhaust fan complete all as directed.
S&F LED flood light fitting 100 watt complete with all fittings incl 1.5 sqmm thre core copper flexible conductor cable all as specified and directed. Make: Crompton Cat part No CFS-504-100-30-60D-SL-GL-NSG or equivalent in Philips & Wipro
S & F of ceiling fan star rating with hook 1200 mm (48") sweep and connecitng up complete with and including three core copper conductor flexible cord of 0.5 sqmm cross sectional area of required length from ceiling rose to porcelain connector block of fan suitable on working AC, SP 230 V electric supply including electronic fan regulator stepped, flush type including all connection all as specified and directed.
M & L for Earthing complete with galvanised steel pipe electrode, 40mm bore, medium grade, 2.5 mtr long buried directly and vertically in ground with top edge at ground level after making bore hole of size not less than 150 mm dia and 2.50 Mtr long using suitable mechanical drilling rig (for drilling near the specified location), connected with galvanised steel earthing lead of 04 mm all as shown in Plate No-2, connected to the earthing test point, concrete pit in PCC 1:3:6 type C-2 with pit cover, funnel, wiremesh, 32 mm dia light grade GI tubing for protection of GI lead 04mm, charcoal and salt in alternate 150mm thick layers around GI earth pipe, including necessary returning filling in & removal all as specified or indicated in SSR Part-I, including testing to achieve earth resistance value as per IS specification on completion.
Supply and lay LT UG cable 2 core 10 sqmm XLPE insulated armoured 1100 Volts grade heavy duty cable with PVC insulated stranded aluminium conductor laid in trenches all as specified and directed.
All as per item No. 150 here-in-before but 10 sqmm 4 core complete all as specified and directed
All as per item No. 150 here-in-before but 35sqmm 3,5 core complete all as specified and directed
Supply only HDPE Double wall corrugated pipe (DWC) confirming to IS-14930 (Part-II) of size 63mm including snap fit coupler as required for cable protection.
S & F of outdoor feeder pillar box fabricated from factory of overall size 950 mm (L) x 400 mm (b) x950 mm (H) made with 3 mm thick CRCA sheet with hinged door front and rear locking arragements for each cabinet, including painting with super enmaled paint of two coat over a coat of red oxide primer and black at bottom after antirust treatment of CRCA sheet top cabinet with incoming 3 phase & neutral and bus bar rating current 1.5 times with IP 65 protection. The feeder pillar shall be provided with two Nos of earth terminal hinged door, front and rear door with locking arrgagement suitable for 1100 Volts grade, 3 Phase, 415 Volts, 50 Cycles, AC suppply, LT danger notice plate front and rear, The panel shall be rest on iron angle frame size 50x50x5 mm and embedded 300 mm below ground level in PCC 1:2:4 Type B-1 using 20 mm grade stone aggregate, 500 mm above ground level complete all as directed by Engr-in- Charge with follwoings :-
Incomer
MCCB FP 100 Amp -01 , 25 KA
Outgoing
(a) MCCB 3 pole 63 Amp -01 , 25 KA
b) MCB FP 32 Amp, 10 KA - 02 No
(c) MCB DP 32 Amp, 10 KA - 04 No
(e) LED type indicator lamp - 03 Nos
(f) Internal wiring with suitable size
(h) Ameter 0-200 Amps -01 No
(i)) Voltmeter 0-500 Volts - 01 No
M & L for Earthing complete with galvanised steel pipe electrode, 40mm bore, medium grade, 2.5 mtr long buried directly and vertically in ground with top edge at ground level after making bore hole of size not less than 150 mm dia and 2.5 Mtr long using suitable mechanical drilling rig (for drilling near the specified location), connected with galvanised steel earthing lead of 25x4 mm all as shown in Plate No-2, connected to the earthing test point, concrete pit in PCC 1:3:6 type C-2 with pit cover, funnel, wiremesh, 32 mm dia light grade GI tubing for protection of GI strip 32x6mm, charcoal and salt in alternate 150mm thick layers around GI earth pipe, including necessary returning filling in & removal all as specified or indicated in SSR Part-I, including testing to achieve earth resistance value as per IS specification on completion.
M/S JAYCONSTRUCTION CO
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .