COMPREHENSIVE MAINT FOR NO 1 INF BN (31 RAJPUT) UNIT AREA AT MIL STN UDAIPUR

Amount

Supply and fixing in repair 0.56 mm dia MS galvanised wire cloth with average width of aperature 1.18 mm and fixed with tinned tacks or galvanised wire staples, beads or in steel windows/doors complete all as specified and directed.

Supply and fixing in repair 3 mm thick sheet glass ordinary quality and glazing with oil putty in squares not exceeding 0.50 Sqm in each pane as including in repair complete all as specified and directed.

Supply and fixing for figured glass, 3mm thick, pin head type and glazing with oil putty or beads in squares not exc. 0.50 Sqm in each pane as in repairs complete all as specified and directed.

Supply and fixing 10 mm thick toughned glass as in hinged doors, partitions automatic door sand similar work including cutting to shape, drilling holes required including taking out old broken/ unservicable glass complete all as specified and as directed

Supply and fixing for figured glass, 4.8mm thick, pin head type and glazing with oil putty or beads in squares not exc. 0.50 Sqm in each pane as in repairs complete all as specified and directed.

Supply and fixing in repair 300 mm, mild steel ordinary rat tail rod pattern spring including roller and roller plate complete all as directed.

Supply and fixing in repair 40mm dia cupboard knobs fixed with nuts screws and washers of brass polished

Supply and fixing in repair brass ,4 lever Locks, cupboard, grade I, size 50 mm fixed with shutter with necessary cutting and fixing complete.

Supply and fixing in repair 16 mm thick prelaminated particle board exterior grade,prelaminated side with decorative choice lamination& side balancing white lamination fixed with screws to timber frame work complete all as specified and as directed

Supply & fixing in repair Continuous (piano) hinges, mild steel, bright finish or electrogalvanised of width of flaps (when open) in 30mm

Supply & Fixing in repair magnetic ball catches with 8mm dia steel ball brass body and striking plate including letting in and fixed, overall length of cover plate 140mm long complete all as specified

Supply & Fixing in repair self closing/auto Casement type hinges 90/180 degree. (Make: Haffle/ Dorma/Hettich)

Supply & Fixing in repair Telescopic steel channel ball bearing drawer channel silver/chrome plated size 250/300 mm etc ( Make : Hettich/Haffle/KEA)

Supply & Fixing in repair Glass shelf size 500 X 125 mm radius with and including bracket and glass complete set etc.

Supply & Fixing in repair stainless steel Towel Rack with lower hanger size 24'' (600 mm) fixed to walls with hook etc. (Make- Jaquar Cat No-AHS-1581H)

S&F in repairs HDPE PVC lid (tank cover) with locking arrangement for 500/1000 Ltrs capacity PVC tank complete all as specified.

S&F Tubular towel rail aluminium anodised 20 mm dia D-type 60 cm long between flanges, including brackets and fixed to walls, complete.

Material & labour for fabrication of pressed steel cupboard shutter using 1mm thick MS plain sheet with frame 1.25mm thick bent to shape including two coat of synthetic enamel paint on internal surfaces & two coat of hammer tone finish on external surface alongwith locking arrangement mortice lock ,handle etc complete all as specified as per drg No CEBZ/TD/12/2008 sheet 1/3 to 3/3.

Supply & fixed in repairs stainless steel sink with drainage board , made out of 1.00mm thick sheet for kitchen oe laboratory with plug,washers, waste pipe, cast irn cantilever bracket of overall size 915x460mm bowl size 410x330x160mm complete all as specified.

Repairs existing aluminium door/ window shutter including frame with completely/partially taking down door shutter and tightening of all screws, replacing including provision of unservicable hinge, handle, directed by Engineer-in-Charge.(Replacement of Connected or unservicable items paid separately).

Material and labour for anodised aluminium powder coated frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified Note minimum thickness of powder coating 50 micron.

Supply and fixing anodised aluminium powder coated door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified Note minimum thickness of powder coating 50 micron.

Supply and fixing anodised aluminium window and ventilator shutters,powder coated side hung / sliding type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified

Supply & Fixing 4.80 mm thick sheet glass, ordinary quality plain or tinted and glazing with rubber gasket in square exceeding 0.5 Sqm in each pane, complete all as specified and directed.

Supply and fixing galvanized mild steel wire-cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples complete .

Supply and fix in repair Butt hinges, 100 mm long medium weight, cold rolled mild steel, ISI marked complete.

Supply and fix in repair aluminium handles extruded type of size 125mm, complete all as specified and directed.

Supply and fixing in repair 300 mm long aluminium alloy anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet cost or extruded sections or cost alumminium alloy

Supply and fixing in repair 150 mm long aluminium anodised barrel tower bolt of extruded section and fixed complete all as specified and directed.

Supply & fixing in repairs stainless steel type curtain rod 22 to 25mm dia as per sample

Supply & fixing of purpose made brackets trade pattern for stainless steel decorative type curtain rods suitable for holding 22 to 25mm dia as per sample as in repair.

Supply & fixing of stainless steel decorative fincals(round type with mirror optic finish) or wall to wall fincals trade pattern for decorative type curtain rods suitable for 22 to 25mm dia curtain rods as per sample as in repaie complete all as specified.

Supply and fixing in repair Door closer aluminium (extruded) hydraulically regulated designation No 1 universal type, suitable for door shutters of 851 to 1000mm in width and weight between 61 to 80 kg and fixed.

Supply and fixing in repair heavy duty double action Floor Spring Hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing poivet made of brass, other parts made of brass, other part made of mild steel heavy duty and fixed.

Supply and fixing in repair 140mm overall length of cover plate floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring with lower portion fixed with hard rubber, fixed in floor complete all as specified and directed.

Supply and fixing in repair for 75mm long Hasp and staple, aluminium anodised including bolt to hinge plate and fixed with screw as per specified.

Supply & fixing in repairs of Aluminium 2 lever ,Mortice lock, vertical type, size 100 mm complete all as specified and directed

Taking down chowkats or frames area not exceeding 1.50 Sqm (w/o taking off shutters from frames) and removing from site, including cutting holes for taking out existing hold fasts and making good in cement mortar (1:3) or PCC 1:2:4 type B1, complete all as specified and as directed. (Note – The quoted rate shall be deemed to include for fixing of hold fast in the same opening irrespective of position of hold fasts and no separate item for making good of hold fasts shall be paid).

Taking down chowkats or frames area exceeding 1.50 Sqm and not exceeding 4.00 Sqm (w/o taking off shutters from frames) and removing from site, including cutting holes for taking out existing hold fasts and making good in cement mortar (1:3) or PCC 1:2:4 type B1, complete all as specified and as directed. (Note – The qouted rate shall be deemed to include for fixing of hold fast in the same opening irrespective of position of hold fasts and no separate item for making good of hold fasts shall be paid).

Taking down shutters of any description not exceeding 1.00 Sqm each, from chowkhat complete all as specified.

Taking down shutters of any description exceeding 1.00 Sqm but not exceeding 2.00 Sqm each, from chowkhat complete all as specified.

Supply and fixing for mild steel framed work as in door chowkats/gate of angle or angle iron work as in fixing of cooler stand by drilling/cutting the stone masonry wall and fixing up to 1st floor walls, other section of grade Fe-290-Gde E-165 with gusset plate rails, braces etc welded/drilled to fixing of steel sheeting or other covering doors etc. to be prepared for sliding or hanging with and including either hooks and hinges or steel hanging door fittings (exclusive steel sheeting or other covering, running rails & guides), complete all as specified and as directed by the Engr-in-Charge.

Material & labour for PCC 1:2:4 type B-1 ( using 20mm graded mechanically crushed stone aggregate) as in bed blocks, copings, apex stones,side of interlocking tiles, embedding to cooler stands in wall, embedding hold fasts etc complete all as specified and directed.

Supply and fixing, made 100% Solid WPC (Wood Polymer Composite) Door Frames of cross section 45 mm x 70 mm (moulded) having single rebated made from Wood Polymer Composite (Single Extruded Process) material comprising of virgin PVC polymer of K-Value 57-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ruce husk/wheat husk)and non toxic additives fabricated with meter joints after applying PVC solvent cement & screwed with full body treated star headed screws having minimum frame density of 780 Kg/cbm & manufactured by "Rajshri/Echon or Eq" an ISO 9001-2015 certified company, having good screw holding capacity (Screw withdrawal strength of (Min, 990N) Minimum compressive strength of 58 N/mm2, modulus of elasticity 900N/mm2 and resistance to spread of flame of class A category with property of being termite/borer prof, water/moisture proof & fire retardant & fixed in position with and including SS Dsh Fasteners/Hold Fast of required dia and length, all as per specifications drawings as directed,. Material test certificate and authentication should be compoulsory provided by the manufacturing company.

S&F factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N / m2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fie retardant WPC to be laminated with PVC foil of minimum 14 micron thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws, all as per direction of Engr-in-Charge. (Note : Stainless steel butt hinges and necessary SS screws shall be paid separately).

Supply & fixed 200 mm long aluminium anbodised barrel tower bolts of extruded section and fixed complete all as specified and directed.

Supply & fixed 150 mm long Extruded aluminium alloy handles, fabricated type anodised complete all as specified.

S&F 100 mm long stainless steel butt hinges with galvanised MS hinge pin etc.

S&F double legged door stopper of overall length of cover plate 150 mm of aluminium alloy body and tongue anodised with hard drawn steel spring fixed in floors and rubber all as specified and directed by Engr-in-charge.

Supply & fixed in repairs MS helical door spring 150 mm long fixed with screws to wooden chowkhats or fixed with welding to steel chowkhats.

Hacking out old broken glass (any thickness, size, quality or description) from wooden/steel frames, glazed with putty or fixed with beads.

Supply and fixing for 3.0 mm thick sheet glass, ordinary quality and glazing with oil putty in square not excc 0.5 Sqm in each pane complete all as specified and as directed by the EIC.

Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets, complete all as specified as directed.

M&L for Providing & fixing false ceiling With Semi perforated 12mm thick micro tegular edged GRG false ceiling tiles at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 595 x 595 mm of approved texture,design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Noncombustible as per BS 476 (part 4 )-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main- T runners of size 15 x 32 mm of length 3000mm,cross-T of size 15x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of size 600x 600mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1 OOOmm length and L-shape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mm to be fixed on periphery wall I partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in- complete all as per manufacturer's instructions and as directed.

Supply and fixing in repair Vitreous China squatting pan “Orissa pattern” size 580x440mm white with integral foot rest (excluding flushing cistern and flush pipe) with CI ‘P’ trap of long arm of suitable size including connection to flush pipe, anti symphonic pipes and bed concrete etc complete.(Make:Parryware/Cera/Jaquar Essco/Prayag)

Supply and fixing in repair Vitreous China wash down water closet pan (Pedestal Pattern) and trap (standard pattern) coloured as approved including connection to drain (or outgoing pipe) and to flushing pipe anti symphonize pipe etc. including plastic water closet seat, white/black, closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device and jointingcomplete with fixing bolts complete (Make:Parryware/Cera/Jaquar Essco/Prayag)

Taking down old vitreous china EWC and cistern and S&F vitreous china EWC one piece Single Piece WC with PP Soft Close Slim Seat Cover, Hinges, Dual Flush Cistern Fittings, Fixing Accessories And Accessories Set, Size: 360x660x755 mm, S Trap- 220 mm all as specified and directed. (Make -Jaquar Essco, Brand-Aspire, CAT No: AIS-WHT-101851S220SPPSM or Eq.)

Supply and fixing in repair Plastic water closet seat,any colour as available, closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device and jointing complete.(Make:Parryware/Cera/Jaquar Essco/Prayag)

Supply and fixing in repair PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets of 10ltrs capacity (Make:Parryware/Cera/Jaquar Essco/Prayag)

S&F in repair Vitreous china bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe fixed in repairs (excluding flushing cistern, flush pipe and waste pipe) all as specified. (Make:Parryware/Cera/Jaquar Essco/Prayag)

S&F in repair Vitreous China Urinal, Half stall type,white (excluding flushing cistern, flushpipe and waste pipe)fixed in repairs (excluding flushing cistern, flush pipe and waste pipe) all as specified. (Make:Parryware/Cera/Jaquar Essco/Prayag)

S&F in repair Vitreous china wash hand basin (550X400mm) white with pedestal , flat back excluding taps but including brackets & CP waste coupling 32mm, LDPE waste pipe 32mm upto floor complete all as specifed and directed. (Make:Parryware/Cera/Jaquar Essco/Prayag)

S&F in repairs PVC connection 15mm dia of length not less than 450mm with both ends, brass fly nut complete all as specified & as directed.

S&F in repair Urinal spreader of PTMT any colour for fixing with 15mm dia pipe. (Minimum weight 60gms).

S&F in repair 15mm bore Concealed stop valves cast copper alloy screwed down high pressure with crutch or butter fly handles screwed both ends for iron pipe or for union all as specified and directed by Engr-in-charge.

Supply & Fixing in repair 15mm bore tubes medium grade galvanized with all fittings such as Tee, elbows, sockets, unions, plugs, short lenghts etc. and fixed complete to walls and ceilings or laid in floors concealed or open of any length including taking down or up existing GI tubing & connections all as specified and directed by Engr-in-charge.

Supply & Fixing in repair 20 mm bore tubes medium grade galvanized with all fitting such as Tee, elbows, sockets, unions, plugs, short lenghts etc and fixed complete to walls and ceilings or laid in floors of any length including taking down or up existing GI tubing & connections all as specified and directed by Engr-in-charge.

Taking up or down steel tubing and connections, 15 mm bore fixed on walls, floors or ceiling etc complete.

Taking up or down steel tubing and connections, 20 mm bore fixed on walls, floors or ceiling etc complete.

Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings 16mm dia bore on walls/ceiling or laying in floors or fixing as in concealed to walls or in floors etc, and making good the surfaces matching to exsiting surfaces of walls/ floor to the entire satisfaction of Engineer-in-charge.

All as per item above but 20mm dia bore, complete all as specified and as directed by the EIC.

Demolition and breaking up of AC rain water pipe /UPVC pipe line 100mm/75mm dia incl all fittings, complete all as specified.

Supply & Fixed for 110mm dia UPVC, soil waste drain pipe, type ‘A’, conforming to IS 13592-1992, single socketed, in any length with rubber rings joints or jointed with solvent cement joint, laid in trenches or in floors, complete all as specified and directed.(Note- Rubber rings for pipes and fittings shall be conforming to IS 5382-1985)

Supply & Fixed for 110mm dia UPVC, soil waste drain pipe, type ‘A’ , conforming to IS 13592-1992, single socketed, in any length with rubber rings joints or jointed with solvent cement joint fixed to wall, complete all as specified and directed.(Note- Rubber rings for pipes and fittings shall be conforming to IS 5382-1985)

Supply & Fixed for 75 mm dia UPVC, soil waste drain pipe, type ‘A’ , conforming to IS 13592-1992, single socketed, in any length with rubber rings joints or jointed with solvent cement joint fixed to wall, complete all as specified and directed.(Note- Rubber rings for pipes and fittings shall be conforming to IS 5382-1985)

Supply & Fixed for 110 mm bore UPVC (SWR) bend with access door including jointing with solvent cement, complete all as specified. .(Note- UPVC bends shall be conforming to BS 4515 DIN 19531 and DIN 19534)

Supply & Fixed 110 mm bore UPVC (SWR) ( singleT) equal or unequal including jointing with solvent cement, complete all as specified.

Supply & Fixed 110 mm bore UPVC (SWR) branch piece,single (singleY) equal or unequal including jointing with solvent cement, complete all as specified. .

Supply & Fixed for 75 mm bore UPVC (SWR) bend including jointing with solvent cement, complete all as specified. .(Note- UPVC bends shall be conforming to BS 4515 DIN 19531 and DIN 19534)

S & F in repairs PVC flushing cistern valveless, syphonic action kit and washers type, 10 litres capacity with inlet, ball valve float and handle any make with exisiting fixed, supplied and fixed in repairs, complete. Make: – Commander, ISI marked /Parryware ISI marked/Cera/Jaquar, ISI marked.

Material and labour for Rotational moulded polyethylene water storage tanks of 500 Litres capacity, (cylindrical vertical tanks with closed top) hoisted and fixed in position including making necessary arrangements for fixing inlet, outlet and over flow pipe and provision of wash out pipe etc including taking down existing tank complete .

Material and labour for Rotational moulded polyethylene water storage tanks of 1000 Litres capacity, (cylindrical vertical tanks with closed top) hoisted and fixed in position including making necessary arrangements for fixing inlet, outlet and over flow pipe and provision of wash out pipe etc including taking down existing tank complete .

S & F in repair, Ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe 20 mm dia (minimum weight 210 gms) complete.

Demoletion of stone slabs including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises

M&L 75 mm thick PCC (1:4:8) Type D-2 using 40 mm graded stone aggregate as in sub sub base surface finished even & rough complete .

Demolition of cement concrete (un-reinforced) in ground floors and paving not exceeding 15 cm thickness (below or above ground level ) complete.

Material and labour for 75 mm thick PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) as in plinth protection/ hard standing, surface finished even and smooth without using extra cement, laid in panels n exc 3 mtr long and joints shall be filled with the mixture of bitumen and sand in (1:3) by weight, complete all as specified and directed.

Demolition of brick and stone masnary work built in cement mortar incl all quions, arches, pillars etc. but excluding ashlar facings dressed stone work and precast concrete articles complete all as specified and directed.

M&L brick work with sub class ‘B’ modular bricks straight or curved o plan exc 6m mean radius built in cement mortar 1:4 all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises

Material and labour 25 mm thick PCC 1:2:4 type B-1, using 20 mm graded stone aggregate, including finishing surface of concrete topping even and rough as in screed bed complete.

M&L for 18-20 mm thick green marble slabs on cooking platform/shelf/flooring etc. machine cut laid over and including cement screed 15mm thick in CM 1:4 and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting polishing, half round moulding and cutting of holes for gas pipe complete.

Material and labour for machine cut Kota stone slab 20-25 mm thick (of size not less than 55 cm x 55 cm in flooring and 120 cm x 25 cm in treads) laid and jointed with grey cement slurry mixed with pigment to match shade of the slab including half round edge moulding, cutting, waste, rubbing and polishing (Granite finish) over and including cement screed bed 20 mm thick in cement mortar (1:4) base including rubbing and mirror polishing, complete all as specified.

M&L polishing of existing kota stone in flooring incl filling of joing with grey cement slurry mixed with pigment to match shade all as specified and directed.

M & L for light coloured Glazed ceramic tiles in vertical surfaces size 450 x 300 x 7 to 8 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in cement mortar 1:4 on fair faces of brick work or concrete surfaces as backing for tiles.

Material and labour Non skid coloured ceramic tiles 7 to 8 mm thick area of each tils exc.0.11 sqm but not exc 0.18 sqm in floor etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over and including 15 mm thick screed bed in Cement Mortar 1:6 complete all as specified and directed

Material & Labour for Vitrified light coloured tiles 8-9 mm thick ( square or rectangular) polished, area of each tiles not exc. 0.36 sqm, in floors etc. set and jointed with cement mortar and pointed in white or coloured cement to match over and with including 15mm thick screed bed or bedding layer with CM 1:4 all as spd and directed.

Material & Labour for Vitrified light coloured tiles 8-9 mm thick of size 600 x 100 mm on polished on vertical faces of walls set and jointed with cement mortar and pointed in white or coloured cement to match over and including 10mm thick rough finished plaster in cement mortar (1:4) all as spd and directed.

Material & labour for 20mm thick granite (of any type) work (table rubbed and polished)in steps, jambs, pillars, win dow-cills, cooking plat forms and like in cement mortar (1:4) including point ing in white cement (1:2) us ing marble dust with admix ture of pigment to matchwith shade of granite over and including 15 mm thick screed bed in Cement Mortar 1:6 complete all as specified and directed

Material and Labour for Preparation of old surfaces of walls, pillars cornices surfaces including brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts, removing nails making good holes cracks etc on plastered or unplastered surfaces and applying one coat of white wash on walls complete all as specified and directed.

Material and Labour for Preparation of old surfaces of ceiling including brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts removing nails making good holes cracks etc on plastered or unplastered surfaces and applying one coat of white wash on ceiling complete all as specified and directed.

Material and Labour for applying one coat of oil bound distemper on walls, pillars cornices etc surface incl preparation of old plastered surfaces by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and incl filling necessary where required with putty as in patches or nail holes obtain smooth finish using sand paper and matching the existing surface complete all as specified and directed.

Material and Labour for subsequent coat of distemper oil emulsion ( White/ Ivory or any colour) over one coat applied under Sl item No 103. above.

Material and Labour for applying 1 mm thick weather coat Asian/Birla/JK wall care white putty in two layers including complete removal of existing treatment of internal or exxternal walls, roof projection, fins and fascia etc. with wire brush or any manual other mechanical method by manual and reaching upto old plastered surface complete all as specified and directed.

Material and Labour for applying one coat of cement base paint on walls, pillars cornices etc surface including Preparation of old treated surfaces (plastered or unplastered) by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorecent salts and trading oil and greasy spots including filling necessary where required with putty as in patches or nail holes obtain smooth finish using sand paper and matching the existing surface complete all as specified and directed. (Make :-Snowcem / Berger paint (Duracem)/ Nerolac paint /Asian Paints/Indigo Paints )

Material and Labour for applying two coat of cement base paint on walls, pillars cornices etc surface including Preparation of old treated surfaces (plastered or unplastered) by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorecent salts and trading oil and greasy spots including filling necessary where required with putty as in patches or nail holes obtain smooth finish using sand paper and matching the existing surface complete all as specified and directed. (Make :-Snowcem / Berger paint (Duracem)/ Nerolac paint /Asian Paints/Indigo Paints )

Material and Labour one coat of exterior emulsion paint white or tinted on old treated walls or fascia of roof or chajjas on prepared putty surfaces of bldg upto tripple storeys bldgs complete all as specified & directed. Note : Make :-Asian Paints (Brand-Ace)/ Berger paint (Brand -Walmasta) / Nerolac paint (Suraksha plus)

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified & directed. Note : Make :-Asian Paints (Brand-Ace)/ Berger paint (Brand -Walmasta) / Nerolac paint (Suraksha plus)

Material and Labour for applying one coat of synthetic enamel paint on wooden surfaces or wood based surfaces of any description, over 10cm in width or girth including preparation of old surfaces complete all as specified and directed. (Make: Asian Paint, Brands-Premium gloss enamel/Berger- Luxol High Gloss/Nerolac-Synthetic Hi- Gloss)

Material and Labour for applying one coat of synthetic enamel paint on steel surfaces of any description, over 10cm in width or girth including preparation of old surfaces complete all as specified and directed. (Make: Asian Paint, Brands-Premium gloss enamel/Berger- Luxol High Gloss/Nerolac-Synthetic Hi- Gloss)

Material and Labour for 15mm thick plaster in cement mortar 1:4 on fair faces of brick work or concrete surface, kerb stone and finishing the surface even and smooth (without using extra cement ) including taking down plaster of walls scrubbing down with water and dispose of dibries where directed by EIC, complete all as specified and directed incl WPC @ 200 ML per 50 kg cement bag or as per manufacture instructions Note : (i) WPC shall be measured and paid separately. (ii) Rendering upto 9 mtr ht shall be included in the quoted rate).

Material and Labour for 15mm thick plaster in cement mortar 1:6 on fair faces of brick or concrete surface and finishing the surface even and smooth (without using extra cement ) including taking down plaster of walls scrubbing down with water and dispose of dibries where directed by EIC, complete all as specified and directed.

Material and Labour for 10mm thick plaster in cement mortar 1:3 on concrete surfaces of ceiling and finishing the surface even and smooth (without using extra cement ) including taking down plaster of walls scrubbing down with water and dispose of dibries where directed by EIC, complete all as specified and directed.

Supply only liquid water proofing compound, ISI marked complete all as specified and directed.

Material and labour for preparation of newly plastered surface of wall and applying two coats of cement base paint complete all as specified. (Make :-Snowcem / Berger paint (Duracem)/ Nerolac paint /Asian Paints)

Material and Labour for applying two coat of oil bound distemper incl preparation of newly plastered surfaces of walls, pillars cornices etc complete all as specified and directed.

Material and Labour for applying three coat of white wash on ceiling surfaces incl preparation of newly plastered ceiling surfaces complete all as specified and directed.

Material and Labour for repairing of RCC projection, Chajjas, Facia,Bands, Shelves, Beam, RCC railing, Balcony and similar works by dismantling of loose / disuntegrated portion of RCC at any height and in any situation floor including provn of support with chicken wire mesh and dubbing/filling with PCC (1:2:4) type B-0 using 12.5 mm graded aggregate 15 to 25 mm thick after applying cement slurry @ 3 kg/sqm finished even and smooth to desired shape and applying two coats of finished to match with existing surfaces complete all as specified and directed.

Material and labour for writing letters or figures (block, Roman, Italic or Indian exc 100mm and n.exc 300mm high for writing bldg Nos with synthetic enamel paint complete all as spd and directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.

M&L for point wiring with 1.5 Sqmm multistranded,1100 volt grade copper conductor cable of PVC insulated, FRLS and unsheathed type alongwith 1.5 Sqmm PVC insulated stranded copper conductor cable for continous earthing in & including PVC rigid conduit concealed on stone/brick masonrty wall surface with accessories having ISI mark fixed on wall surfaces / ceiling including provision of PVC box of appropriate size for fixing switches sockets etc. all as specified for One light point / Fan/ bell point controlled by one switch.

(a) One light point point controlled by one switch with cables 1.5 sq. mm size

(b) One fan/exhaust fan point controlled by one switch with cables 1.5 sq. mm size

(c) One 3 pin socket outlet, 5 Amps on the same board with other switches, with cables 1.5 sq. mm size.

(d) One 3 pin socket outlet, 5 Amps, independent, with cables 1.5 sq. mm size.

(e) One bell/ buzzer point controlled by one push button on the same board with other switches or independent with cables1.5 sq.mm. size.

(f) One light point controlled by two 2-way switches, with cables 1.5 sq. mm size.

(g) One power point with 2.5 sqmm copper conductor including 2.5 sqmm unsheathed copper continuity conductor connected to common earth dolly and controlled by one 15 Amp switch

All as per items No 122 above for one point for (AC/geyser point ) with PVC insulated unsheathed FR cable, 1100 volt grade multy stranded copper conductor of size 4.00 sqmm (Nominal area ) including earth wire PVC insulated unsheathed 1100 volt grade cable with stranded copper conductor of size 4.0 sqmm (Nominal area ) cable common connected to earth dolly controlled by one switch complete all as specified and as directed by Engr-in-Charge.

Supply & Fixing Switch piano, flush type single pole, one way 6 Amp all as specified and directed.

S&F switch piano flush type single pole 16 Amp 2 Way .

Supply & Fixing bell push flush type single pole, 5 amps complete all as specified and directed.

Supply & Fixing Buzzer, Ding Dong AC. 230 volts, single pole.

Supply & Fixing switch piano flush type, single pole, one way 16 Amps complete all as specified and directed.

M&L socket outlet 2 in 1, 3 pin, 6A flush type complete all as specified and directed.

M&L socket outlet 2 in 1 ,3 pin, 5 Amps and 15 Amps flush type complete all as specified and directed.

Supply & Fixingixing inreplacement of Ceiling rose, 3 phase/PVC/polycarbonate, isolated body for complete all as specified and directed.

Supply & Fixing inreplacement of Lamp holder, PVC/Polycarbonate type with cord grip cap suitable for pendant fittings

Supply & Fixing inreplacement of stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. as reqd. complete all as specified and directed.

Disconnecting electric connections and taking down old unserviceable main switches/ DB’s sheet metal enclorsures 02 ways, 4 ways, 8 ways/ duly fitted with MCB’s/ cutouts 32 amps capacity including unserviceable wooden boards and making good the disturbed surface of the wall/ceiling.

Supply & Fixing MCB distribution box single door powder coated sheet metal encloser 240 volts SPN including 200 amps rated bus bar of the following type.

(a) 12 ways

(b) 08 ways

(c) 04 ways

Supply and fixing 415V 10KA 'B' curve miniature circuit breaker (MCB) of foour poles (TPN) and current carrying capacity 40 Amp to 100 Amp in the DB complete with connection testing and commissioning.

Supply and fixing SPN 40 TO 63 amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning.

Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 6 to 32 AMP, in the MCB DB Complete with connection testing and commissioning.

Disconnecting of unserviceable sub main wiring/Service connection of any size and including steel conduit and accessories & removing from site and making good the disturbed surfaces complete all as specified and directed.

M & L for wiring for circuit/submain wiring in PVC conduit alongwith earth wire with the following sizes of 2x2.5 sq.mm + 1x2.5 sq.mm earth wire FR is PVC insulated copper conductor, single core cable in surface/recessed as required. Note : Two run of 2.5 sqmm cable with combined of R,Y & B and one run of 2.5 sqmm of Green colour in PVC conduit alongwith necessary clamp will be measured as one RM.

M & L for wiring for circuit/submain wiring in PVC conduit alongwith earth wire with the following sizes of 2x4 sq.mm + 1x4 sq.mm earth wire FR is PVC insulated copper conductor, single core cable in surface/recessed as required. Note : Two run of 4 sqmm cable with combined of R,Y & B and one run of 4 sqmm of Green colour in PVC conduit alongwith necessary clamp will be measured as one RM.

Taking down U/S earth plug and Supply & fix new metal clad 20 Amp 230 volts single pole and earth enclosure with two pin and earth plug with socket complete with one single pole MCB of 20 Amp 10 KA all as directed by Engineer-in-charge.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as per directed by Engr-in-Charge.

Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of uitable size from ceiling rose complete all as per directed by Engr-in-Charge.

Taking down old U/S exhaust fan and supply and fixing metal/PVC frame exhaust fan of size 200mm sweep 1280 RPM, air delivery 520 CMH, power input 28 W single phase 240 Volts connected complete all as directed.

S&F inreplacement of PVC rectangular block to be fixed on wall surface wiith required drilling, inserting screw/gutties for mounting, switches, sockets, fan regulator etc. with 3 mm thick plastic laminated sheet cover of size 100 mm x 100 mm and 50 mm deep

S&F inreplacement of PVC rectangular block to be fixed on wall surface wiith required drilling, inserting screw/gutties for mounting, switches, sockets, fan regulator etc. with 3 mm thick plastic laminated sheet cover of size 175 x 100 x 50 mm deep

S&F inreplacement of PVC rectangular block to be fixed on wall surface wiith required drilling, inserting screw/gutties for mounting, switches, sockets, fan regulator etc. with 3 mm thick plastic laminated sheet cover of size 200 x 150 x 50 mm deep

S&F inreplacement of PVC rectangular block to be fixed on wall surface wiith required drilling, inserting screw/gutties for mounting, switches, sockets, fan regulator etc. with 3 mm thick plastic laminated sheet cover of size 250 mm x 200 mm x 50 mm deep

Supply & replacement of hanging clamp, nuts and bolts including Rubber Reel of Ceiling Fan (any type, sweep and make) complete all as specified and directed by Engr-in-Charge.

Supply & fixing in replacement of PVC canopy for ceiling fan 1200/1400 mm sweep.

Supply & fixing in replacement of capacitor holder for ceiling fan 1200/1400 mm sweep.

Supply & fixed in replacement of capacitor of 2.5 MFD all as specified.

Taking down old unserviceable GI pipe and supply and laying new GI pipe 20 mm dia medium grade incl all GI pipe fittings, for solar water heating system/Geyser of size ltrs/50 ltrs etc. complete all as specified.

Taking down old unserviceable GI pipe and supply and laying new GI pipe 25 mm dia medium grade incl all GI pipe fittings, for solar water heating system/Geyser of size 25 ltrs/50 ltrs etc. complete all as specified.

Supply and replace Ball valves of size 20 mm high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 20 mm - 210 gms) (Make : Prayag/Polytuff/Pearl)

Taking down & Fixing geyser of cap 25 ltrs/50 ltrs incl grouting of bolts 10mmx150mm long with cement including making good and matching existing surgace and finish all as directed.

Material & Labour for repair to inner tank of geyser cap 25/50 ltr complete taking down the geyser opening outer cover and taking out inner tank soldering/ welding/breezing the tank, testing with filling water, reassembling the geyser complete and fixed on position all as directed

Material & Labour for supply and replacement of glasswool for geyser cap 25/50 Ltr complete opening the geyser taking out old U/S glass wool and replace with new glasswool reassembling and fixed on position all as directed

Material & Labour for replacement in repairs stop valves cast copper alloy screwed down high pressure with fancy type cromium plated 15mm dia bore both ends screwed.

Supply and replace Heavy duty PVC connection with SS nuts and washer suitable for hot water, complete of size15mm dia x 45cms long all as directed

ditto as per item No 161 but 600mm long

Supply and replace heating element ISI marked of suitable type as per existing including rubber ring clamping screws etc complete of 1.5/2.0 KW

Supply and replace heating element suitable for surya geysers round type including rubber ring clamping screws etc complete of 1.5/2.0 KW.

Supply and replace themostatic switch ISI marked for geyser as per existing of range 15-65 degree temparature

Supply and replace syphonic assembly for geyser as per existing size and suitable for surya geysrs 25 ltrs capacity

S&F in replacement of unsevicebale indicating lamps for geysers of Bajaj/Veenus/Ditz/Sphare hot/Sidhson or any other make complete all as specified and directed by engineer-in-Charge.

Supply and replace vacuum release valve on inlet side of geyser

Supply and replace brass chromium plated horizontal/vertical non return valve of size 15mm dia bore ISI marked on inlet side of geyser.

Supply and replace pressure release valve complete

Supply & Replace 3 Pin Plug top 15 Amp

SNEH CORPORATION (BID ID -3433808)

M/s Ajay kumar Garge (BID ID -3432582)

L AND J CONSTRUCTION CO. (BID ID -3433051)

naveen enterprises (BID ID -3433204)

SAPPERS CONSTRUCTION (BID ID -3431726)

THE SHIVAM ENTERPRISES (BID ID -3432772)

Haritwal traders (BID ID -3431887)

CHOPRA ENTERPRISES (BID ID -3431729)