A/R and M/O various residential qtr at Brock Hurst Shimla (SH Renovation of toilet and other minor repair in house No.2 FF Brock Hurst Shimla).

Amount

Steel work welded in built up sections, trusses and framed work including Hollow section cutting hoisting fixing in position and applying a priming coat of red lead paint including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. a) In beams joists channels, angles, tee, flats with connecting plates or angle cleats as in main and cross beams, hip and jack rafters, purlins connected to common rafters and the like.

Dismantling dhajji walling including stacking of serviceable materials and disposal of un-serviceable materials within all leads and lifts (serviceable materials to be stacked properly handed over to the department free of cost) including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Taking out and Refixing doors, windows and clerestory windows shutters (steel or wood) including stacking within 20 metres (twenty metres)lead including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (a)Exceeding 3 sqm in area.

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50(Fifty) metres lead including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.

Half brick masonry with non modular fly ash bricks of class designation 10, conformingio IS :12894, in super structure above plinth and upto floor V level. (i) Cement mortar 1 : 4 (One cement : four coarse sand) including carriage of materials in all leads and lifts as per directions of the Engineer-in-charge.

Tile work in skirting, risers of steps and dado up to 2 m (two metre) height over 12 mm(twelve milimetre) thick bed of cement mortar 1:3 (One cement :three coarse sand) and jointed with grey cement slurry @ 3.3 kg/sqm, including pointing in white cement mixed with pigment of matching shade complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-charge. (i) 8 mm(eight milimetre) thick

Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm(three hundred into three hundred milimetre) or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm (twenty milimetre)thick cement mortar 1:4 (one Cement: four Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Providing and fixing to wall ceiling and floor galvanised mild steel tubes (medium grade) tube fittings and clamps including making good the wall ceiling and floor including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (a) 15mm(fifteen milimetre) nominal bore.

Centering and shuttering including strutting, propping etc. and removal of form for : including carriage of materials in all leads and lifts as per directions of the Engineer-in-charge.(i)Shelves (Cast in situ)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level including carriage of materials in all leads and lifts as per directions of the Engineer-in-charge. (i) Mild steel and Medium Tensile steel bars

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (One cement : One point five coarse sand) : three raded stone aggregate 20 mm (twenty milimetre) nominal size) including carriage of materials in all leads and lifts as per directions of the Engineer-in-charge.

Providing wood work in frames of doors,windows,clerestory,windows and other frames wrought,framed and fixed in position including carriage of materials upto all leads and lifts and as per the direction of Engineer-in-Charge. (i) 2nd class deodar wood.

Providing and fixing paneled glazed or paneled and glazed shutters for doors windows and clerestory windows including black enameled iron butt hinges with necessary screws including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. a)40mm thick i)2nd Class Deodar Wood.

Providing and fixing wire gauge shutters using galvanised M.S. wire gauge of I.S. gauge designation 85 G. with wire of dia 0.56 mm for doors windows and clerestorey windows including bright finished black enamelled iron hinges with necessary screws including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) 40mm thick 2nd class deodar wood

Applying priming coat over new wood and wood based surfaces after and including prepering the surface by thoroughly cleaning oil,grease,dirt and other foreign matter) sand papering and knotting including carriage of materials in all leads as per directions of the Engineer-in-Charge.

Painting two coats(excluding coat) on new wood and wood based surface with enamel paint to give an even shade including cleaning the surface of dirt,dust and other foreign matter,sand papering & stoping including carriage of materials in all leads as per directions of the Engineer-in-Charge.(i) With white enemal paint.

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) 125mm (One hundred twenty five milimetre)

Providing and fixing anodized aluminum sliding door bolts anodized colour and shade with bolts and nuts screws etc. complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (a) 250x16mm (two hundred fifty into sixteen milimetre)

Providing and fixing aluminum tower bolts(barrel type)anodized transparent or dyed to required shade and colour with screws etc. complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. ( a) 200x10mm (two hundred into 10 milimetre).

Providing and fixing PVC floor trap of self cleaning designwith sand cast iron screwed down or hinged gratting without vent arm complete including cost of cutting and making goods the wall and floors including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.( i) 75mm (Seventy five milimetre)nominal diameter.

Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete including carriage of mateirals in all leads and lifts as per directions of the Engineer-in-Charge. (a)110 mm (One hundred ten milimetre) dia.

Providing and fixing PVC plain bend ISI marked including fixing with approved adhesive etc. complete including carriage of mateirals in all leads and lifts as per directions of the Engineer-in-Charge.(a)110 mm (One hundred ten milimetre)dia

Providing and fixing PVC collars ISI marked including fixing with approved adhesive etc. complete including carriage of mateirals in all leads and lifts as per directions of the Engineer-in-Charge.(a)110mm (One hundred ten milimetre)dia

Providing and laying granite work (Table rubbed and polished) in flooring 20mm thick base in cement mortar 1:3(1cement:3sand) including jointing with cement mortar 1:2(One white cement: two marble dust) with an admixture of pigment to match the shade of the marble. 20mm(twenty milimetre) thick white makrana marble including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) Green Marble.

Providing and fixing vitreous china wash down water closet (European type W.C. pan) with integral P or S strap including jointing the trap with soil pipe in cement mortar 1:1 (One cement:one sand) (seat and cover to be measured and paid for separately) including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) One piece OPC Elba single piece-WC 2205 with seat cover and all acessories. Hindware.

Providing and fixing Health faucet with pipe and hooke including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. Make essess cat No.C-232 Y Pura lite HF .

Providing and fixing C.P. Brass towel rail complete with C.P. Brass brackets fixed to wooden plugs with C.P. brass screws including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. Make essess cat No.AC 701.

Providing and fixing angular stop cock 15mm(fifteen milimetre) without wall flange including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. Make essess cat No.DE-04

Providing and fixing Bib cock )Foam Flow) with wall flange including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. Make essess cat No. DE02.

Providing and fixing single lever basin mixer without pop-up waste system with 450mm(four hundred fifty milimetre) long flexible house DE-21 including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Providing and fixing over head shower including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. Make Essess cat No.OH-107A.

Providing and fixing C.P. brass towel bracket complete fixed to wooden plugs with C.P. brass screws including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. Make essess cat No.AC-708 (61 cm)

Providing and fixing Viking Glass corner complete fixed to wooden plugs with C.P. brass including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.Make Viking.

Providing and fixing Viking Glass shelf complete fixed to wooden plugs with C.P. brass screws including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. Make Viking.

Providing and fixing C.P. brass towel ring complete fixed to wooden plugs with C.P. brass screws including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. Make Essess cat No.AC-702

Providing and fixing Tumbler holder complete fixed to wooden plugs with C.P. brass screws including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. Make essess cat No.AC-704

Providing and fixing Robe Hook complete fixed to wooden plugs with C.P. brass screws including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. Make essess Cat No.PE-5

Providing and fixing wall mixer with telephonic shower arrangement including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. Make essess cat No.DE-08

Providing and fixing angular stop cock 2 in 1 15mm(fifteen milimetre) without wall flange including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.Make essess cat No.DE-04B

Providing and fixing toilet paper holder including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.Make essess cat No.AC 706

Providing and fixing vetrious China Hind ware IS marked IS No.2556 or equivalentg wash basin with single hole for pillar tap with C.I. or M.S. brackets painted white including cutting holes and making good the same but excluding fitting complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Removing dry or oil bound distemper by washing and scraping and sand papering the wall surface smooth including necessary repairs to scratches complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) Old work (one or more coats)

Painting one coat (excluding priming coat) on previously painted wood and wood based surfaces with enamel paint to given and even shade including cleaning of all dirt, dust and other foreign matter sand papering and stopping including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.(a)With white enamel paint.

b) With enamel paint other than white

Extra over item for every subsequent coat of paint on wood including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (a) With white enamel paint.

(b) With enamel paint other than white

Painting one coat (excluding priming coat) on previously painted steel and othermetal surfaces with enamel paint brushing to give an even shade including cleaning the surface of all dirt,dust and other foreign matter including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i)With white enamel paint.

Extra over item No.48 for every subsequent coat of paint including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i)With white enamel paint.

Finishing wall with weather proof exterior grade emulsion of approved design (Apexultima) or its equarlied on undecorated wall surfaces (two coats) to give an even shade and final finish after thoroughly cleaning the surface to remove all dirt, dust and other foreign matter etc including sand paper smooth complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Providing and fixing 0.60mm (Zero point sixty milimetre) thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron Jor L hooks, bolts and nuts 6mm dia metre with prepainted limpet and rubber washers mplete with all accesoriees as required as per the direction of Engineer-in-charge.

Providing ridges or hips 60 cm over all in plain G.I.sheet with galvanised iron J or L hooks bolts and nuts 8mm dia G.I. Limpet and bitumen washers copmlete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. i)0.63 mm thick sheet

Providing and work in frames of false ceiling,partitions etc. sawn and fixed in position with necessary stainless steel screws etc.including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) Sall wood

Providing and fixing byson board ceiling of approved quality with butt jointing and wood screws (frame work and cover fillets to be measured and paid for separately)including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) 9mm thick

Providing and fixing plain square edged cover fillets (beading) 40mm x12mm(forty milimetre into twelve milimetre) section with wood screws in ceiling and lining including mitring at junctions including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) Ist Class Indian teak wood.

Providing and fixing M.S. BP Sheet 1.66mm to 2mm (One point sixty six milimetre to two milimetre) thick in eaves board /facia /soffits /ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete (Base members of steel work shall be measured & paid separtely) including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge .

Providing and fixing 15cm wide 45cm overall semi-circular plain G.S. sheet gutter with iron brackets 40x3mm size, bolts, nuts and washers etc. including making necessary connections with rain water pipes complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Providing and fixing panelling or paneling and glazing in panelled or panelled and glazed shutters for doors,windows and clerestory windows (area of opening for panel inserts excluding portion inside grooves or rebated to be measured).Panelling for panelled and glazed shutters 25mm to 40mm(twenty five milimetre to forty milimetre) thick:Pre-laminated with decorative lamination on both side exterior Grade-I MDF Board 12mm(twelve milimetre)thick confirming to IS:14587 including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) (i)Powder coated aluminium (minimum thickness of powder coating 50 micron)

(b) For shutters of doors windows and ventilators including providing and fixing hinges/pivots and making provision for fixing of fittings whereever required including the cost of EDPM rubber/neoprene gasket required (Fittings shall be paid for separately)Powder coated aluminum (minimum thickness of powder coating 50 micron) including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

SUNIL KUMAR

Mitter Dev Sharma