REPLACEMENT OF ASBESTOS SHEET WITH PRE PAINTED GALVALUME SHEET AND MISC B/R AND E/M WORKS OF BLDG NO T-13 COOK HOUSE AND P-13 DINING HALL SUB AREA DANAPUR CANTT

Dismantling timber scantlings 40 sqcm and over in section, in any position of framed work.

Dismantaling of Asbestos cement/GI (corrugated/semicorrugated, etc.) sheets in roof coverings complete all as specified and directed.

Dismantling structural steel work including doors, gates but excluding framed truss etc complete all as specified and directed.

S&F rolled mild steel Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. Fe 410W Grade E 250 complete all as specified and directed.

S&F Trapezoidal corrugated roof Polyurethane foam panel with upper skin of pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.40mm thick of coloured sheet,30mm deep profile and lower skin by plain GI sheet with center core of Polyurethane foam (PUF) of core thickness >25mm and overall thickness of panel 60mm for some degree of thermal and sound insulation as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

M & L for Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof Ridge, fixed with self tapping screws complete all as specified and directed.

M & L for Pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof Ridgel, fixed with self tapping screws complete all as specified and directed.

Fixing only Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof Ridge, fixed with self tapping screws complete all as specified and directed. Note-Sheet for fixing obtained from item -02.

Dismantling wall and ceiling board (fiber, pulp, PVC, insulation etc) or insulation boards / slabs / blankets, any thickness including cover fillets complete all as specified and directed.

S & F for GI frame work for seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/intermediate channel 0.9mm thick having equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel at 457mm centre to centre, size of grid 605mm x 605mm complete all as specified and directed

M & L for 6 mm thick Non asbestos fibre cement building boards fixed or laid / inserted to timber / GI / Aluminium framework with screws complete all as specified and directed. Make- Armstrong, Hunterdouglas etc

M&L for Providing and fixing 10mm thick plaster of paris ceiling (Gypsum anhydrous) to flat surface with sunk or raised mouldings over metal frame work complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and paving n exc 15 cm thickness (below or above ground level) all as specified and directed

Dismantling of floor, walls, roof tiles including bedding but not backing and rubbish off permises all as specified.

M&L for 10mm thick Light shade vitrified ceramic tiles in floors, exceeding 0.36 sqm n exc 0.42 sqm over and including 15mm thick screed bed in cement mortor 1:6 set & jointed in neat cement slurry and pointed in white cement mixed with pigments to match the shade of tiles complete all as specified & directed.

M&L for 10mm thick Light shade vitrified ceramic tiles, exceeding 0.36 sqm n exc 0.42 sqm as on vertical surface skirtings, dados etc, over and including 10 mm thick rendering in CM 1:4 set and jointed in neat cement slurry and pointed in white cement mixed with pigments to match the shade of tiles complete all as specified & directed.

M&L for 10mm thick Dark shade vitrified ceramic tiles in floors, exceeding 0.42 sqm n exc 1.00 Sqm set & jointed in neat cement slurry & pointed in white cement mixed with pigments to match the shade of tiles over and including screed bed or bedding layer 15mm thick in CM 1:6, complete all as specified & directed.

M&L for 10mm thick Dark shade vitrified ceramic tiles exceeding 0.42 sqm n exc 1.00 Sqm on vertical surface such as skirtings, dados etc, over & including 10mm thick rendering in cement mortar (1:4) set and jointed in neat cement slurry and pointed in white cement mixed with pigments to match the shade of tiles complete all as specified & directed.

Dismantling of tiles/stone slabs of any description or thickness, laid dry or laid dry and pointed in floors, aprons etc

M&L hard core of broken Bricks of gauge n exc 63mm deposited, spread and levelled in layers n exc 15 cm thick watered and rammed to a true surface all as specified and directed.

M&L for glazed ceramics coloured tiles of size 450x300x7mm thick on vertical surfaces such as skirting/dados/wall, etc over and including 10mm thick rendering in cmeent mortar (1:4) set and jointed in neat cement slurry and pointed in white cement mixed with pigments to match the shade of tiles complete all as specified & directed.

M&L for vitrified heavy duty (dura stone) tiles 300x300x7 to 8 mm thick in floor, set and jointed in neat cement slurry and pointed in white cement mixed with pigments to match the shade of tiles over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exc 0.06 sqm and not exceeding 0.11 sqm in floors etc over and including 15mm thick screed bed in CM 1:6 set & jointed in neat cement slurry and pointed with white cement mixed with pigments to match the shade of tiles complete all as specified & directed.

M&L 25 mm thick plain cement concrete (1:2:4), type B-0, using 12.50 mm graded stone aggregate as in floors including finishing the surface rough & even for receiving kota/tiles complete.

M&L Machine cut Kota stone slab flooring 20-25mm thick as in riser, steps & skirting, over cement mortar laid and jointed with gray cement slurry mixed with pigment to match the shade of the slab incl rubbing, polishing & rounding to edges complete incl 15mm thick rendering in CM 1:4 complete all as specified.

M&L for Mirror polishing on marble/ granite/ Kota stone/ stone work where ever required to give high gloss finish complete.

Demolition of brick work built in cement mortar including all quions, arches, pillars, etc complete.

M&L Brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in CM (1:6) all as specified

M&L Brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:4 in half brick thick wall.

M&L PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) in fdn, sub base, mass concrete & cinder concrete etc. complete.

Taking down cement plaster on wall/ceiling/roof etc including raking out joints, hacking for key scrubbing down with water etc complete all as specified and directed.

M&L 15 mm thick rendering on fair faces of brick /concrete surfaces in CM (1:6), finished even and smooth (without using extra cement ) complete.

M&L for rendering 15 mm thick in cement mortar 1:4, in two layers (1st layer 10 mm thick rendering coat and 2nd layer 5 mm thick finishing coat) on brick work or concrete surfaces, second layer (finishing coat) mixed with liquid water proofing compound @ 200 ml / 50 Kg bag of cement as per manufacturer's instructions and finished the surfaces even and fair without using extra cement complete. Note : Liquid WPC will be measured and paid separately.

M&L rendering 5 mm thick in cement mortar 1:3 on concrete surfaces of ceiling and finishing the surfaces even and smooth complete.

Supply only water proofing compound (liquid), ISI marked.

Taking down chowkats or frame with shutters of any description (without taking off shutters from the frames) n. exc 1.5 Sqm each complete all as specified and directed.

Same as item No 37 above but exc 1.5 Sqm and n.exc. 4 Sqm each.

S & F for powder coated aluminium door fame with shutter made out of following section complete fixed to position with hold fast all as specified & directed (a) chowkhat frame of size 83.50 x 44.45 x 1.87 mm thick weight @ 1.30Kg/RM (b) Style/Vertical member of size 47.62 x 44.45 x 1.90 mm thick weightn @ 0.911Kg/RM (c) Top and bottom rail of size 95.25 x 44.45 x 2.00 mm thick weight @ 1.511kg/RM (d) Middle rail of size 49.91x 44.45x 2.01 mm thick weight @ 1.072Kg /RM (e) Top panel with 5.00 mm thick tinted glass fixing with rubber gasket. (f) Bottom panel with 5 to 6 mm thick Alumnium composite panel thick with clips (g) 100 mm dia round handle disc type -02 nos & Alu tower bolt 200mm - 01 No, Hinges 04 Nos each shutter. (h) Aluminum and PVC beading as per requirment as in fixing for paticle board & Glass, jointing cleat including locking arrangement. etc.

S & F in repair powder coating aluminium window sliding shutter three track with following specification:- (a) chowkhat frame of size 81.25 x 38.10 x1.25 mm @ 0.781Kg/RM (b) Style/Vertical member of size 47.62 x 44.45 x 1.18 mm @ 0.667Kg/RM (c) Top and bottom rail of size 47.62 x 44.45 x 1.18 mm @ 0.667Kg/RM (d) Partialy 0.36 mm dia stainless steel wire netting mosquito proof aperature 1.40mm with fixing arrangment. (e) Partialy 5.00 mm thick tinted glass fixing with rubber gasket. (f) Aluminum beading and rubber gasket as per requirment as in fixing for paticle board & Glass, joining cleat including locking arrangement. etc

Supply and fixing factory made uPVC door framemade of uPVC. extruded sections having an overall dimension (extruded section profile) 42x50 mm(tolerance ± 1 mm), with wall thickness 2.0 mm(± 0.2 mm), corners of the door frame Jointed withgalvanized brackets and stainless steel screws, jointsmitred and Plastic welded. The hinge side vertical ofthe frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and3 nos. stainless steel hinges fixed to the frame complete all as specified by the manufacturer complete all as specifed and directed.

Supply and fixing factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multichambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

S&F Toughned glass 05mm thick as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required complete all as specified and directed.

S&F Toughned glass 08 mm thick as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required complete all as specified and directed.

Supply & Fixing of 30-32mm thick engraved moulding Flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides supplied and fitted to chowkats and both face is covered with deco rative face veneer with lipping/frame to match complete all as specified and directed.

Supply & Fixing of 2nd class hardwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed

S&F Brass, sliding door bolt 300mm long with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed complete all as specified.

S&F 300 mm long Brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed as specified.

S&F floor door stopper 140 mm overall length of cover plate of brass body and tongue, anodised. With hard drawn spring, fixed in floor omplete all as specified and directed.

Taking down AC/PVC pipes (including all fittings), with spigot and socket ends and lead joints including burning out joints of 100 mm dia pipe.

S&F PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints fixed to wall/floor complete.

M/L PVC(SWR) bend of 110mm dia of any radius etc complete all as specified and directed

M/L PVC(SWR) Tee of 110mm dia etc complete all as specified and directed

S&F PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints fixed to wall/floor complete.

M/L PVC(SWR) bend of 110mm dia of any radius etc complete all as specified and directed

M/L PVC(SWR) Tee of 110mm dia etc complete all as specified and directed

S&F Mild steel framed works such as grills,gratings,etc, with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work for portions framed and hung as gates, including pintle hinges, stops, hand made sliding bolts, etc conforming to Fe 290 Gde -E-165.

S&F Mild steel works as in hold fasts, clamps, plain angle cleats for securing purlins to wood trusses or rafters, cooler stands and similar small articles conforming to Fe 410-0 or Fe 310-0

Taking up or down steel tubing and connections, including cleaning for re-fixing or removal to store of 15 mm dia.

Taking up or down steel tubing and connections, including cleaning for re-fixing or removal to store of 20 mm dia.

S&F steel Tubes, ‘medium grade’ galvanized, with all fittings and fixed complete to walls and ceilings or laid in floors of 15 mm dia complete all as specified and directed

S&F steel Tubes, ‘medium grade’ galvanized, with all fittings and fixed complete to walls and ceilings or laid in floors of 20 mm dia complete all as specified and directed

S & F in repair15 mm dia single lever Basin mixer without popup waste system including all necessary fittings as approved complete all as specified and directed.

M & L preparation of new surface and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over one coat of 3.00mm putty and including priming coat of primer applied @ 0.90 litre/ 10 sqm at all heights complete all as specfied and diretced.

M&L for prepartion of new surface & Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and directed.

M & L complete removal of existing surface and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over one coat of 3.00mm putty and including priming coat of primer applied @ 0.90 litre/ 10 sqm at all heights complete all as specfied and diretced.

M&L for complete removal of existing surface & Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and directed.

S&F PVC connection 15mm dia size and 450 mm long with 2 Nos check nuts its washers complete all as specified and directed.

S&F in repair bib tap 15 mm bore cast copper alloy fancy type chromium plated with capstan head screwed down screwed for iron pipe or for brass ferrule fixed to iron pipe etc. complete all as specified and directed.

S&F in repair brass CP steel tubular towel rail 20 mm dia "D" type 60 cm long between flange aluminium anodised complete all as specified and directed.

S&F in repair angle cock 15 mm bore fancy type chromium plated, with capstan head, high pressure, screwed down, screwed for iron pipe or for brass ferrule fixed to iron pipe complete all as specified and directed.

S&F in repair two way angle cock 15 mm bore fancy type chromium plated, screwed down, screwed for iron pipe or for brass ferrule fixed to iron pipe.

S & F in reapir chromium plated corner glass shelf with brackets complete all as specified and directed.

S&F in repair Stainless steel soap dish of size 300 x 150 mm etc fixed to wall with screw complete all as specified and directed.

S&F glass shelf 600mm (with brass brackets) including fixing arrangements complete. Make- Jaquar Cat part No CPA-1171or equivalent as approved by GE.

S&F of stainless steel Soap Dispenser with Glass Bottle of standard size and shape complete. Make- Jaquar Cat part No CPA-1135 or equivalent as approved by GE.

S&F toilet Paper Holder with Flap Recessed Type (Stainless Steel) complete all as specified and directed. Make- Jaquar Cat part No AHS-1553 or equivalent as approved by GE.

S & F in repair Vitreous china wash down water closet pan ( pedestal pattern ) Rimless Single Piece WC with UF Soft Close Slim Seat Cover, Hinges, Dual Flush Cistern Fitting, Fixing Accessories And Accessories Set, Size: 385x720x710 mm, S Trap- 300 mm complete all as specified and directed Make : Jaquar Cat part No ONS-WHT-10853S300UFSM or equivalent as approved by GE.

S&F vitreous china Counter Top Basin of Size: 500x435x180 mm including waste pipe and waste coupling complete. Make Jaquar Cat Part No KUS-WHT-35601 or equivalent as approved by GE.

Taking down copper/ aluminium point wiring (light, fan, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc. removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls, floors etc. to match the existing complete all as specified and directed.

Taking down carefully main switches DB's/ MCB DB's with MCB and making good the disturbed surfaces of walls as directed.

M&L for point wiring complete with PVC insulated unsheathed, 1100 volts grade cable 1.5 Sqmm (nominal area) FRLS type multi stranded copper conductor, single core drawn in and including not less than 20 mm dia rigid PVC conduit 'medium grade' ISI marked including all conduit accessories for concealed wiring for one light/fan/bell/buzzer / exhaust fan point controlled by one, one way switch, including concealed pressed steel terminal box of required size not less than 1.0 mm thick factory made duly painted inside & outside with two coats of black bituminous paint over & including a coat of red oxide primer, with 2.8 mm thick top cover of plastic laminated sheet of required colour for mounting switch, sockets, fan regulator etc including 1.5 Sqmm FRLS type PVC insulated unsheathed cable multi-stranded copper conductor as continuous earth wire and connected to earth dolly as required at site& including chases cutting & making good disturbed surface & applying finishes to match existing surface complete all as specified and directed.

Ditto- all as item No. 85 here-in-before but one 3 pin, 5amp socket out let on independent board.

Ditto -all as item No.85 here-in before but 3pin ,5amp socket out let on the same board with other switch.

All as per item no 85 above but for one 6 pin 15/16 amps socket outlet point on an independent board with cables of size 2.50sqmm.

M&L for point wiring complete with PVC insulated unsheathed, 1100 volts grade cable 4.0 Sqmm (nominal area) FRLS type multi stranded copper conductor, single core drawn in and including not less than 20 mm dia rigid PVC conduit 'medium grade' ISI marked including all conduit accessories for concealed wiring including concealed pressed steel terminal box of required size not less than 1.0 mm thick factory made duly painted inside & outside with two coats of black bituminous paint over & including a coat of red oxide primer, with 2.8 mm thick top cover of plastic laminated sheet of required colour for mounting switch, sockets, fan regulator etc including 4 Sqmm FR type PVC insulated unsheathed cable multi-stranded copper conductor as continuous earth wire and connected to earth dolly as required at site& including chases cutting & making good disturbed surface & applying finishes to match existing surface complete all as specified and directed.

supply .laying ,and fixing for alluminium unarmoured cable 1100V grade 16 sqmm 4 core in casing caping/ through saddle on wall complete all as specified and directed. .

S & F Modular metal flush box 1/2 module

S & F Modular metal flush box 3 module

S & F Modular metal flush box 4 module

S & F Modular metal flush box 6 module

S & F Modular metal flush box 8 modules(Horizontal)

S & F Modular metal flush box 12 (3 row x4) modules

S & F modular white cover plate 1 module

S & F modular white cover plate 2 module

S & F modular white cover plate 3 module

S & F modular white cover plate 4 module

S & F modular white cover plate 6 module

S & F modular white cover plate 8 (Horizontal) modules

S & F modular white cover plate 12 (2 x 6) modules

Supply & fixing switch modular flush type 6 amps, single pole, one way complete all as specified and directed.

Supply & fixing socket modular flush type suitable for 6 amp, 2/3 module combined 2 module complete all as specified and directed.

Supply & fixing switch modular flush type 16 amps, single pole, one way complete all as specified and directed.

Supply & fixing socket modular flush type suitable for 6/16 A, 2/3 pin combined 2 module complete all as specified and directed.

S&F modular bell push, flush type, single pole, one way 5/6 Amp 230 volts complete all as specified and directed.

S&F electric bell ding dong type AC 230 Volts, 50 Hz single pole complete all as specified and directed.

S&F ceiling rose single phase , PVC poly carbonate,insulated body three terminals ISI marked complete all as specified and directed.

S&F sheet metal enclosure for 4 way TPN DB double door 415 Volt with 200 amp rated bus bar complete with suitable for 1 x 63Amp TPN as incomer and MCB SPN as outgoing connection through proper size of lugs and cable glands including taking down existing MCB DBs and connecting up with existing cable complete all as specified and directed.

Supply and fixing 415V 10KA 'C' curve miniature circuit breaker (MCB) of 4 poles and current carrying capacity 100 Amp in the DB complete with connection testing and commissioning complete all as specified and directed.

S& F for sheet metal enclousre factory made for MCB DB's SPN, 8 way, double door, 240 Volts with 200 Amp rated bus bars including taking down existing unserviceable MCB DB complete make -Havells all as specified and directed.

S&F MCB SP 240 Volt 6 TO 40 Amp ISI marked conforming to 'B" curve, breaking capacity 10 KA complete all as specified and directed.

S&F MCB SPN 40-63 amp 30mA for earth leakage. Over load and short circuit protection ISI marked complete all as specified and directed.

M&L for earthing complete with galvanised steel earth plate electrode 600x600x6 mm thick buried directly in ground (earth pit not less than 2.25m deep below GL with top edge of plate not less than 1.50 m below normal ground level) connected to galavanised earth lead wire 4.0 mm dia (7.5m) as means of bolts, nuts, check nuts and washer besides brazing at all joints as shown on drawings and including excavation, earth work, GI pipe (ISImark) light grade 15 mm bore for protection of GI wire from earth electrode to and including the earth test point, supplying and laying charcoal dust, common salt, PCC 1:3:6, type C-1(using 20 mm graded crushed stone aggregate ) chamber and mild steel angle iron frame 40 x 40 x 3 mm and 40 mm thick pre-cast RCC cover 1:2:4 , type B-1(using 20 mm graded crushed stone aggregate ) reinforced with 8 mm dia TMT bars @ 75 mm C/C both ways with mild steel handle 12 mm dia, PGI funnel and wire mesh, 20 mm dia GI pipe light grade(ISI marked) for watering all as shown in electrical plate No 3 of SSR Part-I and connected to earth test point including testing of earthing & dismantling /taking down existing old / unserveciable earthing complete all as specified and directed. (Note:- The rates quoted shall also deemed to include the cost of Earth test point and earth wire and protection pipe upto 7.5 meter beyond the earth plates electrode.)

Supply & fixing fan regulator, modular type, socket type compatible for BLDC fans ,single phase complete all as specified and directed.

S & f single pole and neutral encl 240 V with two pin and earth plug and socket complete with one single pole MCB 20 Amp complete all as specified and directed.

Supply and fixing LED lights fitting 1x 20W, 220V,AC decorative box type (enhances safety) with high quality polycarbonate diffuser , 4 ft,2000lm,voltage protection range 140V -270 V,NW 4000K ,connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.Make : Philips /bajaj or eqivalent.

Supply and fixing LED luminaire 600 mm x 600 mm,35/36 watt, 220 V AC recessed type with high efficiency warm type PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete.

Please Enable Macros to View BoQ information