supply of various spares of Wagon tippler, Apron feeder, Crusher and Roller screen

Supply of spares to RGTPP, Khedar, Hisar

Suspension Arm for Ring Granulator with following specification:- Carbon Steel of Grade 45C8 C - 0.40 to 0.50% Mn - 0.60 to 0.90% Si - 0.15 to 0.35% P - 0.04% max. S - 0.04% max. Al - 0.02 to 0.05% Mechanical Properties Tensile Strength - 620 MPa min. Yield Strength - 320 MPa min. Percentage Elongation – 15% min. Hardness – 175 BHN min. As per IS 2004:1991 (Drawing attached) (Test as per QAP)

CS Casting Breaker Plate with following specification:- Carbon – 1.05 to 1.35% Manganese – 11.50 to 14.00% Silicon – 1% max. Phosphorous – 0.08% max. Sulphur – 0.025% max. Chromium – 1.50 to 2.5% Hardness – 188 to 229BHN As per IS 276 III Tolerance as per IS 4897 class II (Drawing attached) (Test as per QAP)

Suspension Bar for rotor assy. of Crusher Size – 57 dia x 2815lg Material – Normalized EN- 19 bar

Bearing Housing ( Close End) for roller screen Material – EN-9

Bearing Housing ( Open End) for roller screen Material – EN-9

Roller of Return Roller Assembly for Apron feeder ID – 60mm, OD – 120mm, length – 120mm Material - EN-8

Roller of Return Roller Assembly for Apron feeder 40 dia x 244lg Material - EN-8

Top stop split bushes for Wagon Tippler TP0223/3 Material of Construction:- Phosphor bronze bush, (PB2) Cu – around 87.5% Sn – around 11.5%

UNITECH ENGINEERS

ALFA ENGINEERING

Shiv Shakti Engineering Works