REWIRING REWINDING OF CEILING FAN SUMMER AND WINTER APPLIANCES AT HMS EBS BHOJRAJ AND CHANNIBARI UNDER GE W HISAR

Amount

Taking out window type AC 1.5/2 ton and reinstallation including window opening cutting and provision of packing material as per site requirement including closing of old opening and making new opening all as specified and directed at site.

S&F in replacement compressor of window type air conditioner 1.5/2 Ton capacity of existing make and providing new sealed compressor unit of same size and make, connecting up suction and discharge pipe with gas welding, pressure testing, leakage rectification vaccumising and including initial charging of Refrigerant gas R-22, compressor oil, testing commissioning including taking down old U/s compressor, complete all as specified and directed .

S&F in replacement of thermostat switch for any capacity window/split type air conditioner complete all as specified and directed.

S&F in replacement of PVC air filter suitable for 1.5/2 ton window type air conditioner of any make complete all as specified and directed.

S&F in replacement of over load protector for any type AC 1.5/2 Ton capacity complete all as specified and directed.

S&F in replacement of condenser fan blade suitable for 1.5/2 ton window type air conditioner of any make complete all as specified and directed.

S&F in replacement of condenser fan motor 1/5 HP 230 volt AC Cooper winding single phase double shaft suitable for 1.5 ton window type AC complete all as specified and directed.

S&F in replacement of front grill suitable for window type air conditioner capacity 1.5 Ton as per existing complete all as specified and directed.

S&F in replacement Single pole and neutral, Sheet Metal enclosure with Socket plug Top and MCBs. and two pin and earth plug and socket with one single pole MCB 25 Amps complete all as specified and directed.

M&L for taking down window/split type air conditioner of 1/1.5/2 Ton capacity / make / size at site, opening top and side covers disconnecting all electrical controls components and cleaning the complete units with electric blower and spraying clean water, descaling with coil shine solution in both side of cooling coil and condenser, brush cleaning with nylon brush and washing with clean water, refixing the covers and making electrical connection of all the controls and components, installing back the same on site testing, commissioning incl black painting to bottom complete all as specified and directed.

M&L for Gas recharging in window/split type AC 1.5 Ton/ 2 Ton capacity of any make including pressure testing, leakage rectification, vaccumising and testing commissioning complete all as specified and directed.

S&F in replacement of PCB board suitable for 1.5/2 Ton window/split AC/DC including display & remote of existing make complete all as specified and directed.

S&F in replacement of starting capacitor 45 MFD complete all as specified and directed.

S&F in replacement of starting relay for 1.5/2 ton capacity complete all as specified and directed.

S&F in replacement of electric wiring kit suitable for 1.5/2 Ton window/split AC of any make complete all as specified and directed.

S&F in replacement condensing unit of window/Split type AC of capacity 1.5 TR capacity with anti Corrosive paint. fins, condensing coil, coil frame, wiring kit starting and running capacitor, relay condensing motor, with blade complete all as specified and directed.

S&F in replacement indoor unit of window/Split type AC of capacity 1.5 TR capacity with anti Corrosive paint. fins, evaporative coil, air filter, wiring kit starting and running capacitor, fan motor, with blade complete all as specified and directed.

Supply & fixing in replacement Voltage Stabilizer of capacity 5 KVA for automatic operation, Single Phase, naturally air cooled, indoor type, designed for input variation between 170 Volt to 270 Volt and with output voltage stabilized at 230 Volt with accuracy of ± 2.5% and connecting up all as per manufacturer’s instructions & as directed.

S&F in replacement new remote assembly for split/window type AC 1.5/2 ton of any make & existing model complete all as specified and directed. .

Taking down old sealed unit of refrigerator 165-310 ltrs capacity of any make and providing new sealed compressor of same size, make and capacity connecting up suction and discharge pipe with gas welding, pressure testing, flushing the complete system, leakage rectification vaccumising and including initial charging of refrigerant gas, testing commissioning complete all as specified and directed.

S&F in replacement of freezer with cooling coil for 165 to 310 ltrs capacity refrigerator of existing make complete all as specified and directed.

S&F in replacement of lamp 15 watt screw / Pin type suitable for any make and capacity refrigerator complete all as specified and directed.

S&F in replacement of Over loding relay suitable for low/high speed refrigerator compressor of any capacity complete all as specified and directed.

S&F in replacement of thermostat suitable for any capacity refrigerator complete all as specified and directed.

M&L for Charging with refrigerant gas 134a after vacuuming /pressure testing and leakage testing including flushing the system in the refrigerator of any make of 165 to 310 ltrs capacity complete. all as specified and directed.

S&F in replacement of fan moter of Capacity 165 to 330 ltr suitable for refrigerator of any make and capacity complete. All as specified and directed by Engr in charge.

S&F in replacement of PCB board suitable for refrigerator of existing make and capacity 165 ltr to 300ltr complete all as specified and directed.

M&L for taking down sealed unit of deep freezer upto 320 ltrs capacity of any make and providing in replacement new sealed compressor of same size, make and capacity connecting up suction and discharge pipe with gas welding, pressure testing, flushing the complete system, leakage rectification vaccumising and including initial charging of refrigerant gas, testing commissioning complete all as specified and directed.

S&F in replacement of Over loading relay suitable for deep freezer upto 320 Ltrs capacity complete all as specified and directed.

S&F in replacement of thermostat suitable for deep freezer upto 320 Ltrs capacity complete all as specified and directed.

S&F in replacement of fan motor suitable for deep freezer any type complete all as specified and directed.

M&L for taking down old unserviceable compressor of water cooler of capacity 40/80 litres any make/size and providing new sealed compressor and connecting up suction and discharge copper pipe with gas welding, pressure testing of leakage, leakage rectification, vacumising and including initial charging of refrigerant gas R 22, testing, commissioning complete all as specified and directed.

All as per item No 32.00 but water cooler of capacity 120/150 litres.

S&F in replacement of starting/running capacitor 10 to 80 mfd suitable for water cooler of any capacitycomplete all as specified and directed.

S&F in replacement of thermostat switch for water cooler any cap complete all as specified and directed.

S&F in replacement of condenser fan motor 1/ 3.5 HP 250 Volts AC Single phase suitable for water cooler complete all as specified and directed.

S&F in replacement of starting relay kit suitable for any make & capacity water cooler complete all as specified and directed.

S&F in replacement of condenser fan blade for fan motor suitable for water cooler of any make/capacity complete all as specified and directed.

M&L for Gas charging in water cooler of any capacity and make including pressure testing, leakage rectification, vaccumising and testing commissioning complete all as specified and directed.

S&F in replacement of electric wiring kit suitable for water cooler of any make and capacity complete all as specified and directed.

S&F in replacement of PVC float valve assembly suitable for water cooler/Desert Cooler of any size/capacity non metallic body complete all as specified and directed.

S&F in replacement PVC waste pipe 32mm, dia with complete fittings suitable for water cooler of any make and capacity complete all as specified and directed.

S&F in replacement water tap in steel body suitable for any capacity of water cooler with fitting arrangement such as washer and suitable size nipple all as specified and directed by Engr-In-Charge

S&F in replacement of desert cooler submersible pump single phase complete all as specified and directed.

S&F in replacement of desert cooler fan motor duly wounded COPPER suitable for operation on 230 V single AC supply 3 speed 1400 RPM complete all as specified and directed.

S&F in replacement of wood wool pad superior quality for desert cooler of capacity 4000 Cum/hr 5000 Cum/hr having minimum weight 450 gms complete all as specified and directed.

S&F in replacement of capacitor 4 mfd suitable for desert cooler complete all as specified and directed.

S&F in replacement of PVC pipe 15 mm dia of superior quality complete all as specified and directed.

Dismantling , cutting and taking out old winding of desert cooler fan motor of any make and M&L for rewinding of the same with super enameled copper winding wire and providing shallac varnish, testing commissioning complete all as specified and directed.

S&F in replacement of PVC water distributor 3 way for desert cooler of superior quality complete all as specified and directed.

S&F in replacement of PVC fan blade suitable for 18/20 inch sweep desert cooler motor complete all as specified and directed.

S&F in replacement of desert cooler body (overall mimimum size 26 inch x26 inchx39 inch) made out of 22 gauge galvanized sheet,with painting & storage tank capacity should be minimum 120 ltr,including front adjustable grill both side i.e. horizontally and vertically and suitable three side slotted shutter Including necesry fabrication, belding wks complete all as specified and directed.

S&F in replacement adjustable front grill made of GI sheet ,having with air direction control system with knob, P/T switch, indicator lamp, complete suitable for 20"/24" desert cooler. complete all as specified and directed.

S&F in replacement of indicating lamp, 230 volts complete all as specified and directed.

S&F in replacement Plug top 16A, 3 pin, 230 AC, ISI marked complete all as specified and directed.

S&F in replacement of PVC cable for lead wire pvc seathed 3 core size 40/0.0076 of multistranded copper conductors for water coolers/ AC, complete all as specified directed

S&F in replacement of plug top 5 Amps 3 pin, ISI marked complete all as specified and directed.

Taking down ceiling fan of any make and 1200mm sweep at site, cleaning dust and opening up for examination, cleaning all parts and providing fresh lubricant to bearing/bush (oil or grease reqquired) fixing the fan in position after assembling and adjustment for proper running including replacing of cable PVC copper flexible of size 23/0.0076 three core from ceiling rose to fan and other parts if required including testing for smooth running as specified. Note:- Cost of bearings, bushes, capacitors and other spares etc shall be measured and paid for separately as supply only.

All as per Ser item No 59 here-in-before but exhaust fan 450/300mm sweep.

Supply only capacitor 2.5 mfd to 3.15 mfd dry type with PVC clamp make of capacity Epcos/Unistar/Usha.

Supply only of rubber bush complete with nut bolt, fork hook and spilt pin, washer suitable for existing ceiling fan 1200mm sweep.

Dismantling carefully ceiling fans (any make) of 1200mm sweep for cutting down & removing old copper winding wire and M&L for rewinding the same with new super enameled copper wire of suitable size including providing insulation by varnishing, oiling and greasing complete all as specified and directed.(Note: If winding fan found U/S in a month contractor repair the same with out any cost.)

Taking out complete windings, bearings/bushes, papers, tapes, flexible wire, shaft, check nut, frame of exhaust fan of size 300/380/450mm AC 230volts, 50 Hz 900/1400 RPM and M&L for rewinding with insulated copper windings wire of suitable size and replacement of bushes, bearings, tubes, papers, shafts, check nuts, bolts and nuts, capacitors, twin core copper wire, greasing, varnishing assembling and testing complete all as specified and directed. Note Cost of bearings, bushes, capacitors and other spares, if provided shall be measured and paid for separately under respective item of this schedule as supply only.

S&F in replacement of shaft for ceiling fan of any sweep and fixing in position for smooth functioning of ceiling fan complete all as specified and directed.

S&F in replacement of rotor for ceiling fan of any sweep and fixing in position for smooth functioning of ceiling fan complete all as specified and directed.

S& F in Replacement of body cover for ceiling fans of any sweep and make and fixing in position complete all as specified and directed.

S& F in Replacement of PVC canopy for ceiling fans of any sweep and make and fixing in position complete all as specified and directed.

Supply only of ball bearing for exhaust fan upto 450/300 mm sweep .

Supply only of blades of ceiling fan of any sweep & make complete all as specified and directed.

Supply only of capacitor 4 to 6 mfd for exhaust fan complete all as specified and directed.

Supply only of ball bearing for ceiling fan 1200mm sweep.

S&F in replacement Wall mounting Fan 400 mm sweep, 230 volts, fixed on wall with suitable size nut, bolts and washers complete all as specified and directed.

Supply only bush gun metal to match the ceiling fan of size 1200mm sweep

S&F in replacement PVC air fresh air Fan 250 mm sweep, 230 volts, fixed on wall with suitable size nut, bolts and washers and connection complete all as specified & directed.

Machining work in body of ceiling fan by taking out worn out bush, boring hole to accommodate ball bearings complete all as specified and directed.

S&F in replacement MS down rod of 15mm (length upto 3 feet) dia suitable for fan in any length including threading , drilling holes complete all as specified and directed.

Supply only blades of exhaust fan 380/300/450 mm of any make complete all as specified and directed.

S&F in replacement of hanging hook with washer, nut bolt with rubber packing complete all as specified & directed by Engr-In-Charge.

Painting of ceiling fan 1200 MM sweep with blade high gloss white super enameld paint with help of Spray Gun and making smooth surface and marking MES no.with Black Paint all as specified and directed by Engr-In-Charge.

Painting of Exhaust fan 300/450 MM sweep with high gloss black super enameld paint with help of Spray Gun and making smooth surface and marking MES no.with white Paint all as specified and directed by Engr-In-Charge.

Dismantling carefully Wall Fan/ Industrial Fan Metal Body of any size & cutting down & removing old copper winding wire and M&L for rewinding the same with new super enameled copper wire of suitable size including providing insulation by varnishing, oiling and greasing & Refixing the same on site complete all as specified and directed.(Note: If winding fan motor found U/S in a month contractor repair the same with out any cost.)

Supply only gun metal check valve / non return valve 15 mm dia suitable for Geyser of any make/capacity complete. All as specified and directed by Enge in charge.

Supply only pressure release valve for geyser 15 mm dia. All as specified and directed by Enge in charge.

Supply only geyser heating element 2000 watt suitable for any type, size & make of geyser. All as specified and directed by Engr in charge.

Supply only geyser heating element 3000 watt suitable for solar water heater of any type, size . All as specified and directed by Engr in charge.

Supply only thermostat of geyser suitable for any type, size & make of geyser.

Supply only PVC Cable of size 40/0.060mm 3 core copper conductor round type. All as specified and directed by Engr in charge.

Supply only indicating lamp round type suitable for Geyser. All as specified and directed by Engr in charge.

Supply only S/S heating plate assembly complete with water inlet & outlet, rubber gasket, nuts and bots and washers of required size suitable for 50 Ltr Capacity Geyser of any type and make etc complete. All as specified and directed by Engr in charge.

All as per Srl item No 90 above but suitable for capacity 25/35 Ltrs Geyser. All as specified and directed by Engr in charge.

Supply only glass wool for geyser vessel of any size and capacity complete. All as specified and directed by Engr in charge.

Supply only mild steel holding/anchor bolts and nuts machine made of size 10cm to 15cm long and dia of bolt 10mm to 15mm complete. All as specified and directed by Engr in charge.

Supply only dead nut/Safety plug of brass as per sample suitable for Geyser of any capacity/make. All as specified and directed by Engr in charge.

Supply only inner tank of geyser capacity 25/35 ltr made out of 16 SWG sheet Steel suitable for Geyser of any type and make to match the existing size and shape of inner tank of Geyser installed at site. All as specified and directed by Engr in charge.

All as per Srl item No 95 above but for Geyser of capacity 50 ltrs. All as specified and directed by Engr in charge.

Supply only outer tank of geyser made out of GI sheet of existing gauge, shape including top and bottom cover plate complete suitable for inner tank 25/35 ltr capacity geyser of any make complete. All as specified and directed by Engr in charge.

All as per item No 97 but suitable for 50 ltr capacity geyser. All as specified and directed by Engr in charge.

Supply only metal plug top 20A (enclosure type) suitable for geyser. All as specified and directed by Engr in charge.

Supply only hot water PVC connection of 15mm bore heavy duty, length upto 45cm with brass nut joints and washers at both ends complete. All as specified and directed by Engr in charge.

Supply only Cold water PVC connection of 15mm bore heavy duty, length upto 45cm with brass nut joints and washers at both ends complete. All as specified and directed by Engr in charge.

Taking down unserviceable geysers 25/35/50 litre capacity of any make opening up for inspection, inlet, outlet and thermostat pipe, washing the inner tank with anti corrosion solution , the inlet & outlet valves, safety valve, dead weight and refixing the geysers in position and testing for proper functioning including soldering/welding where required to stop the leakage and other jobs connected with plumber and mason which would be required in connection with making the geyser functional complete.

Supply only bottom cover plates of 25/50 ltr geyser all as specified and directed by Engineer-in-charge. All as specified and directed by Enge in charge.

Taking down copper/aluminium point wiring(light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc.removing materials to store for keeping in safe custodyor for taking credit (credit for above items should bemade as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete

Point wiring with 1.5 sqmm(22/.3mm) PVC insulated and unsheathed FRLS single core multistranded copper conductor for one light/fan/bell point in existing PVC rigid non metallic concealed conduit 19/20 mm dia, medium duty, ISI Marked to be terminated in pressed steel terminal boxes with 3 mm thick bakelite sheet top cover including 1.5 sqmm (22/.3 mm ) PVC insulated and unsheathed FRLS single core multistranded copper earth continuity conductor controlled by one switch and/or one regulator complete including repairing the surfaces in CM 1:3 and finishing the surface as per existing treatment all as specified.

All as per Sl item No 105 above herein before but one socket out let 5 pins 5 Amp on the independent board complete all as specified and directed.

All as per Sl item No 105 above herein before but one socket out let 5 pins 5 Amp on the same board but with other switches complete all as specified and directed.

All as per item No.105 herein before but 2.5 Sqmm PVC insulated and unsheathed FRLS single core multistranded copper conductor incl 2.5 Sqmm PVC insulated and unsheathed FRLS copper earth wire for switch socket combination 3 pin 15 amps on independent board Complete.

S&F Socket out let flush type 3/6 pin suitable for 15 Amp plug top Multipurpose 230 V all as specified & directed.

Switch Piano flush type 15 amp single Pole one way 230 V all as specified & directed.

S&F Socket out let flush type 5 pin suitable for 5 Amp plug top 230 V all as specified & directed.

S&F Switch Piano flush type 5 amp single Pole one way 230 V all as specified & directed.

S&F Lamp holder insulated body with back plate batten/angle type for batten fittings complete all as specified and directed.

S & F LED 9W Lamp,6500 K Colour Temp complete as specified and directed.

S&F Ceiling rose surface bakelite surface 65 x 50mm, 3 terminals all as specified & directed.

S & F electronic ceiling fan regulator stepped type heavy duty suitable to work on 230 volts complete all as specified.

S & F sheet metal enclosure MCB DB SPN 8 way with 200 amps rated bus bar 240 volts single door with isolated Neutral Bar & Shrouded bus bar IP protection 43 having door earthing complete all as specified and directed.

Supply and fixing 240V, 10 KA 'B' curve MCB SPN 32 AMP, in the MCBDB complete all as specified and directed.

Supply and fixing 240V, 10 KA 'B' curve MCB SP and 5 to 32 AMP, in the MCBDB complete all as specified and directed.

S & F sheet metal enclosure MCB DB TPN 4 way with 200 amps rated bus bar 415 volts Double door with isolated Neutral Bar & Shrouded bus bar IP protection 43 having door earthing complete all as specified and directed.

Supply And fixing MCB TPN 63 Amps, 415 V, 10 KA complete all as specified and directed.

M & L in replacement of UNSV sub main wiring with 2 single core PVC insulated unsheathed cable, 1100v grade with FRLS PVC 4 sq mm copper cable multi stranded conductor drawn through and including ISI marked PVC conduit 20 mm dia complete, fixed on walls/ceilings with PVC saddles as per IS including of 4 sqmm dia FRLS PVC Copper cable green colour as earth wire connected to earth all as specified and directed by Engineer-in-Charge.

M&L for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6.0 mm thick burried directly in ground not less than 2.25 mtrs deep below normal ground level) with top edge of the plate not less than 1.5 mtrs below normal ground level, surrounded from all sides with mixture of charcoal and common salt and electrode to galvanised earth lead wire 4.00 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel protected by galvanised iron light grade 15 mm dia pipe and GI Pipe 20 mm light grade for water filling including 15x20 mm reducer socket funnel wire mesh, RCC cover PCC chamber pit with PCC (1:3:6) type C-2 excavation and earth work, disposal of surplus spoil, to a distance not exceeding 50 mtrs all as specified and shown on electrical plate No. 5 of 1991 (Part-I) including taking out old existing earthing complete all as directed.

Attending of complaints pertaining to faulty/Non-functional/working state of all accessories pertain to internal Electrification / through telephone or in person round the clock on detailment by MES Service centre deploying electrician and locating and rectifying the fault from Elect Meter/DB onwards in respect of Sub Main /Point wiring including fixtures for power and light, socket, fan, bell point including security light fitted in bldgs etc complete and carrying out repairs to the extent of disconnection and dismantling of faulty wires, battens, conduits, boxes, Main switches, MCB, DBs, and other E/M faults pertaining to particulars equipment including providing wire upto 1.00 mtr and insulatiion tape required for the rectification of defect and refixing of existing dismantling serviceable articles. all as directed .(At EBS & BHOJRAJ) Note:-(i) Contractor shall provide the complain slip and containing 100 pages in triplicate properly binded complete all as specified and directed.

Supply only Rigid non-metallic PVC conduit/Casing caping exclusive of boxes (junction/terminal) but inclusive of all tees, bends,elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc. complete all as specified and directed.

Supply only socket out let 15A, 5 pin, multipurpose type complete all as specified and directed.

Supply only piano type switch 15 Amps, S.P. one way flush typecomplete all as specified and directed.

Supply only piano type switch 5 Amps, S.P. one way flush type complete all as specified and directed.

Supply only socket outlet 3 Pin 5 Amps Multi purpose Piano type, flush type complete all as specified and directed. .

Supply only bell push flush type 5 amps complete all as specified and directed.

Supply only MCB TPN 63 Amps, 415 V, 10 KA complete all as specified and directed..

Supply only MCB SPN 20 -32 Amps, 415 V, 10 KA ( B series ) complete all as specified and directed..

Supplyonly MCB SP 06 - 32 Amps, 415 V, 10 KA ( B series ) complete all as specified and directed..

Supply only sheet laminated 3 mm thick including cutting required size drilling holes for incorporating switch, socket, regulators etc. complete all as specified and directed..

Supply only lamp holder insulated body with back plate suitable for batten fittings complete all as specified and directed. .

Supply only ceiling rose surface bakelite three terminals size 65 x 50 mm complete all as specified and directed.

Supply and laying / fixing / passing through pipe,1100 volts grade heavy duty cable with PVC insulated aluminium solid/stranded conductor served with an inner sheathing of PVC tape armoured ,overall PVC sheathed 10 sqmm 2 core nominal cross section complete all as specified and directed

Supply and fixing LED lights fitting 1x 18/20W, 220V,AC Decorative ultra slim square profile box type LED lighting fixture with extruded polycarbonate,environmental freindly,energy efficient connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.

Supply and fixing LED Building light fitting 25 Watt 230 V AC outdoor type with high pressure diecast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermalmanagement in multiple optics complete with IP 65/66 protection complete.

S&F in Replacement of GI Bracket 25 mm light grade dia pipe for Building Light including clamp & nut bolts all as specified and directed.

Supply and fixing LED light fitting 1 feet 5 watt including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Supply and fixing post top lantern LED type 25 watt 230 watt volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete.with suitable GI tubing including all accessories all as specified and directed.

P.K. ENTERPRISES (BID ID -3508606)

M/s Devendera construction (BID ID -3508624)

YASHU CONTRACTORS (BID ID -3509368)

FOUJI ELECTRIC WORKS (BID ID -3514154)

virendra constructions (BID ID -3514979)