REPAIR/MAINTENANCE / REPLACEMENT OF BOLLARD LIGHT OF HLD , STREET LIGHT, GARDEN LIGHT AND JUNCTION BOX OF STREET LIGHT/GARDEN LIGHT AT VSN NAGPUR

Amount

Labour only for checking the serviceability of different spares / components / parts of security light fittings LED light fittings etc, any wattage/capacity) of any description and in any position, replacement of un-serviceable/damaged/ broken part(s) either in single or in combination, re-assembling the fittings and making the light fittings serviceable, fixing the fittings in position, connecting to electric supply and its testing on installation complete all as specified and directed by Engineer-in-Charge. NOTES FOR SCH `A’ ITEM NO 1:- (i) Fixing element of the new replaced part(s) is deemed to be included in the rates quoted by the contractor for above item and new parts shall be measured and paid separately as supply only against respective items of Sch ‘A’. (ii) Necessary T&P i.e. ladder, tools etc and screws, insulating tapes, internal wiring wire and other minor items excluding the required spares parts for repairing and making the street light fittings/security light fittings in serviceable condition, will be arranged & supplied by the contractor and cost of which is deemed to be included in the rates quoted by the contractor in above respective item.

Supply only following materials suitable for various type of street light, security light for replacing against item no 1 here in above. Make of spares CG,Philips,Wipro

Copper wound Ballast suitable for 400 watt SV/MH light fitting

Lamp single end suitable for 400 watt MH light fitting

Electronic igniters suitable for 400 Watt.

Capacitor 33 mfd HPSV, MV, MH lamp fittings

LED Lamp suitable for 9 W light fittings.

Lamp holder suitable for 250/400 watt SV/MH lamp light fittings

Driver for 40 Watts LED street light luminaries complete. Make : CG S0DQL1-54-700-40W

Driver for 45 Watts LED street light luminaries complete. Make : CG S0DQL-65-700-45W

Driver for 45 Watts LED street light luminaries 70 to 90 Watt complete. Make : CG X100C070V143FNY1BO

Driver for 135/150 Watts LED flood light luminaries complete. Make :CG X150C070V210FNI1BO

Dismantling and Taking out old unserviceable Street Light fittings and Supply fixing 90W LED street light with pressure die cast aluminum housing & toughened glass with IP-66 degree of protection, Individual LED's must have peanut lenses for better throw across & along the road with luminaire efficacy of greater than 85Lumen/Watt (Minimum lumen output of luminaire should be 3800 Lumens ), color rendering (CRI) of ≥ 75 and co-related colour temperature (CCT ) of 5700K (± 500K) , The luminaire should have 5KV surge protection, PF ≥ 0.95, and total harmonic distortion of THD ≤ 10% , voltage range of 140-280V should be provided. Luminaire should have top maintainable driver compartment for easy access to driver during maintenance. The Driver used must be a constant current driver with efficiency of ≥ 85% The manufacturers LOGO must be Embossed/ Engraved in the housing of the luminaire. Make : CG LSTN-90-CDL-A or eqival,Wipro and Philips.

Supply and fix bracket for street light fittings made out GI pipe of light as required to light fitting grade 1.5 m long each bent to shape & size required & fixed to pole with and including flat iron clamps 02 Nos made out of 32 x 6 mm flat iron including GI Nuts, bolts and washers and painting of clamps and street light brackets with one coat of aluminium paint over a coat of red oxide primer and fittings bracket to street light fitting including taking down old unserviceable bracket of any shape and size all as specified and as directed.

Taking down of Monkey guard ( which are fixed to protect the Bollard light), unserviceable Bollard light for minor repair, preparing suface for painting, painting of Monkey Guard with black synthetic enameled paint two coat and refixing of Bollard light after repair and also refixing of Monkey Guard after any brazing/welding work and painting work. Also repair any damage of PCC Block where the Bollard lights have been fixed all as per directed by Engineer charge. Note :- Rates for minor spare of Bollard light/Nuts bolts, paint, cement, aggregate and sand have been included in Item rate of this item

Taking down Unserviceable Junction Box of street light for repair/replacement of wiring, connector, thimbles and copper wire 1.5 sqmm three core upto street light. Refixing of Junction Box after repair with new nut/bolts, locking arrangement and clamp with suitable size as directed by Engineer in charge Note :- Rates for minor spare of Juction box nuts/bolts, clamp, locking arrangement and wire have been included in Item rate of this item.

Taking down Junction Box of street Garden Light for repair/replacement of wiring, connector, thimbles and copper wire 1.5 sqmm three core upto street light. Refixing of Junction Box after repair with new nut/bolts, locking arrangement and clamp with suitable size as directed by Engineer in charge Note :- Rates for minor spare of Juction box nuts/bolts, clamp, locking arrangement and wire have been included in Item rate of this item.

Taking down old unserviceable G cable and Supply & Laying for XLPE insulated, screened,PVC bedded, galvanised steel strip or wire armoured, electric power cables ( heavy duty) with aluminium conductor, 1100 volts, grade cross sectional area 16 sq mm, 4 core in trenches or fixing in walls / poles or drawing through pipe including testing after laid and jointed all as specified and as directed.

Taking down old unserviceable UG cable and Supply & Laying cable XLPE insulated screened Meter PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sq mm 2 core complete all as specified and directed.

Taking down old unserviceable UG cable and Supply & Laying cable XLPE insulated screened Meter PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sq mm 4 core complete all as specified and directed.

Excavation in trenches in hard/dense soil not exceeding 1.5 meter wide and not exceeding 1.5M in depth for laying of cables and getting out of excavated material complete all as specified and directed by Engineer-in-Charge

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25cm thick each, excavated soil in trenches after the pipes have been laid and tested complete all as specified and directed by Engineer-in-Charge

Removing excavated soil to a distance not exceeding 50 meter and depositing where directed at a level not exceeding 1.50 meter above the starting point complete all as specified and directed by Engineer-in-Charge

M & L for Double wall corrugated High density polyethylene pipes (HDPE) of size 40 mm dia laid in trenches for passing of LT cable complete all as specified and directed.

M & L for PCC cable route indicator in mix of 1:2:4 type B1 of size 450x200x75mm with oval shape and writing the letter HT/LT cable with synthetic enamel paint and embedded with PCC foundation type D2 1:4:8 of size minimum 250 mm depth including necessary earth work complete all as specefied and directed.

Excavation of road cutting by manually including making good to disturbed surface after the completion of work with PCC 1:2:4 type B-2 on top not less than 150 mm thick including levelling and cambering according to existing road surface, refilling, watering, ramming etc all as specified and as directed.

M & L for galvanised iron tubing light grade of size 40 mm dia with all fitting laid under floor / road crossing or in trenches or fixed to pole /walls with clamps as required including sealing of pipe ends with approval sealing compound etc complete all as specified and directed.

M&L for providing Plain cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in coping, cable duct, cover slab and benching including all necessary form works complete all as specified and directed.

Dismantling and Taking down old unserviceable cable junction boxes and Supply and fix thermoplastic cable junction boxes IP 55/IP 65 with metric knockout for cable entry with terminal of size 210x155x92 mm on pole with MS clamps, nut bolts, washers and glands suitable for 16 sq mm 04 core cable with RYB cable terminal Block and all as specified and directed . Make Hansel Cat No DK 1600 G or equivalent in Neptune.

Dismantling and Taking out old unserviceable cable junction boxes and Supply and fixing thermoplastic cable junction boxes IP 66 "halogen free and weather proof" for outdoor Installation with metric knockout for cable entry of size130 x180x77mm fixing on pole with MS clamps, nut bolts, washers and glands suitable for 6 Sq mm 02 core cable with RYB cable terminal Block including taking down old unserviceable cable junction boxes all as specified and directed. Make : HENSEL Cat No DK-1000G or equivalent in Rittal.

Supply and fixing of Automatic street light Control Switch using infrared sensor based NATURE SWITCH for automatic switching of street light, Three phase load of 5 KW (Swadeep -02EC5kW3P) with 3 Nos Contactors, 3 Nos Incoming MCB, 3 Nos Outgoing MCB of capacity n20-32 Amps each, circuit wiring (Copper) of 10 Sqmm Nature switch operation should be based Nature light Lux level. required luminance level for switching OFF is less than 10 Lux. The sensor should also have part night operation facility of min. 4 hrs to max 12 hrs. The sensor alongwith suitable SMC encloure confirming to IP 66. The circuit should also have provision for Manual Operation i.e Sensor By-Pass Option setting features complete all as specified and directed. Model : Swadeep-66-5 kW3P

Supply and fix 2 core 2.5 sqmm PVC insulated PVC sheathed weather proof multistranded Copper conductor cable 1100 volts grade drawn through in GI conduit, pole etc with MS clamps from junction box to street light fitting all as specified and directed. Note- GI tube shall be measured and paid separately

Supply and fix 2 core 1.5 sqmm PVC insulated PVC sheathed weather proof multistranded Copper conductor cable 1100 volts grade drawn through in GI conduit, pole etc with MS clamps from junction box to street light fitting all as specified and directed. Note- GI tube shall be measured and paid separately

Supply and fix 15 mm dia GI tubes light grade with all fitting from looping box to street light fittings with clamps, nuts & bolts complete all as specified and as directed

Material and labour for replacement of service cable of PVC insulated, unsheathed aluminium multistranded conductor twin core 4 Sqmm size including dismantling of existing unserviceable cable complete all as directed

Material and labour for replacement of service cable of PVC insulated, unsheathed aluminium multistranded conductor twin core 6 Sqmm size including dismantling of existing unserviceable cable complete all as directed

Material and labour for replacement of service cable of PVC insulated, unsheathed aluminium multistranded conductor twin core 10 Sqmm size including dismantling of existing unserviceable cable complete all as directed

Dismantling and taking out old unserviceable time switch and Supply and fix astro time switch for control street light 3P module,24 hours program,with battery back up of 100 hours complete all as specified and as directed. Make : Legrand,L&T Cat No Cat No AUTS02AST00

Dismantling and Taking out old unserviceable time switch and Supply and fix analog time switch for control street light 3P module,24 hours program,with battery back up of 100 hours complete all as specified and as directed. Make : Legrand ,L&T AUTS03ANA00

Dismantling and Taking out old unserviceable contactor and Supply and fix power contactor 4 pole 415 Volts,40 Amps , MCX 04 coil voltage of rating 240 Volts including taking down old unserviceable power contactor all as specified and as directed by Engr-In-Charge Make;-Legrand ,L&T Cat NoCS97012, GE

Dismantling and Taking out old unserviceable contactor and Supply and fix power contactor 2 pole 240 Volts,40 Amps , MCX 04 coil voltage of rating 240 Volts including taking down old unserviceable power contactor all as specified and as directed by Engr-In-Charge Make;-Legrand ,L&T Cat NoCS90242, GE

Supply & fixing MCB TPN 32 amps of 10 KA in existing panel with incoming and outgoing connection complete all as directed Make : Legrand 4086 58 or equivalant

M&L for preparing surfaces of LT/HT electric poles of any type size including street light brackets, bracket clamps, cable protection pipe, terminal box, stay etc of any sizes and shape & dusting, cleaning the surface complete and applying one coat of aluminium paint completely including painting strips on poles with one coats of sky blue and white synthetic enamel paint complete all as specified and as directed by Engineer-in-Charge.

M&L for stickering of pole No. with letters of size 25 mm height on pole/ plate complete all as specified and as directed by engineer in charge.

Dismantling and Taking out old unserviceable Garden/Pathway Light fittings and Supply, Installation, Testing and Commissioning of Integral LED Ground mounted Bollard Inverted pyramid tripod led bollard with soft 360 degree light with a system lumen output of 300 lumens and a minimum system efficency of 35 lm/W. The luminaire shall have a rated system lifetime of 25,000 buring hours at L70. The luminare should have a color temperature of 3000K and CRI>75. The luminaire shall meet IP65 & IK10 rating with THD < 20% and PF > 0.9. The luminaire housing should made of pressure die cast aluminium with polycarbonate diffuser. The power consumption should not exceed 8W/9W (including driver) complete all as specified and directed. Make:- CG Cat No.LBLSN-10-CDL or equivalant in Philips, GE

Dismantling and Taking out old unserviceable Garden/Pathway Light fittings and Supply, Installation, Testing and Commissioning of Integral LED Ground mounted Bollard Inverted led bollard with soft 360 degree light with a system lumen output of 300 lumens and a minimum system efficency of 35 lm/W. The luminaire shall have a rated system lifetime of 25,000 buring hours at L70. The luminare should have a color temperature of 3000K and CRI>75. The luminaire shall meet IP65 & IK10 rating with THD < 20% and PF > 0.9. The luminaire housing should made of pressure die cast aluminium with polycarbonate diffuser. The power consumption should not exceed 8W/9W (including driver) complete all as specified and directed. Make:- CG Cat No.LBLA3-10-CDL or equivalant in Philips, GE

Dismantling and Taking out old unserviceable street Light fittings and Supply, Installation, Testing and Commissioning of Integral LED street light luminarie 45 Watt die cast aluminium housing designed to act as heat sink for efficient dissipation of heat. Elecrochemically brightened and anodized aluminium reflector. Heat resistant toughened glass is provided with die cast aluminium frame. (IK 08) luminarie provided with a mounting bracket for aiming adjustment. Driver is provided with input voltage surge (10kV), open and short circuit protection. system wattage 45 W and power factor 0.90 complete all as specified and directed. Make CG CRP-409-45-57-SL-GL-NSG or equivalant in Philips, GE

Dismantling and Taking out old unserviceable flood Light fittings and Supply, Installation, Testing and Commissioning of Integral LED flood light luminarie 135 Watt die cast aluminium housing designed to act as heat sink for efficient dissipation of heat. Elecrochemically brightened and anodized aluminium reflector. Heat resistant toughened glass is provided with die cast aluminium frame. (IK 08) luminarie provided with a mounting bracket for aiming adjustment. Driver is provided with input voltage surge (10kV), open and short circuit protection. system wattage 135 W and power factor 0.90 complete all as specified and directed. Make CG CFS-501-150-57-60D-SL-GL-NGG or equivalant in Philips, GE

Dismantling and Taking out old unserviceable flood Light fittings and Supply, Installation, Testing and Commissioning of Integral LED flood light luminarie 50 Watt die cast aluminium housing designed to act as heat sink for efficient dissipation of heat. Elecrochemically brightened and anodized aluminium reflector. Heat resistant toughened glass is provided with die cast aluminium frame. (IK 08) luminarie provided with a mounting bracket for aiming adjustment. Driver is provided with input voltage surge (10kV), open and short circuit protection. system wattage 60 W and power factor 0.90 complete all as specified and directed. Make CG CFS-504-50-57-60D-SL-GL-NSG or equivalant in Philips, GE

Dismantling and Taking out old unserviceable Post Top Light fittings and Supply and fixing in replacement for Post Top latern fitting with LED Decorative indirect posttop for garden,Gate,landscape lighting. IP 65 protection.Resistant to impact and corrosion. Glare-free and better uniformilty and complete all as directed by Engineer-in-Charge Make : CG Cat No LPTO-40-CDL -M or equivalent Philips, GE

Dismantling/Taking down and Re-fixing/erecting of Old steel tubular swaged poles any type with accessories/fittings at other location as directed including necessary excavation, removal of soil, refilling of soil, PCC (1:3:6) type C-2 using 40 mm graded stone aggregate for foundation of pole and coping with PCC (1:2:4) type B-1 using 20 mm graded stone aggregate complete all as specified and directed.

Taking down old unserviceable Post Top lantern fitting Supply and fixing Post Top lantern fitting with LED lamp 9 Watts opal acrylic diffuser and accessories including nut, bolt, washers all as specified and directed.

Supply & fixing of Spike Garde LED light 12 Watt (Green Colour) die cast aluminium housing black colouree floor mounted outdoor use, colour green, Input Voltage-AC 140V-265V, PF-> 0.9, Power consumption 12 + 10% Rated Frequency- 50Hz, luminus flux - > 1200 Lm, LED light source - SMD,Color Rendering Index (CRI) > 80, Colour Temperature - 3000K(WW), 6000 K(WH) Working Temperature - 0oc to 500c , Rated life > 40,000 hrs, IP rating-IP65, Surge Protectio Upto 3KV including taking down complete all as specified and directed. Make : Luker (Product Code- LSSPK12W\ ) /CG / Philips/ GE

Supply & fixing pathway LED light 6 Watt die cast aluminium housing silver gray floor/Wall recess mounted outdoor use, colour warm white, Input Voltage-AC 140V-265V, PF-> 0.9, Power consumption 6W + 5% Rated Frequency- 50Hz, luminus flux - > 400 Lm, LED light source - SMD, Beam Angle-60 deg, Color Rendering Index (CRI) > 80, Colour Temperature - 3000K(WW), Working Temperature - 0oc to 500c , Rated life > 50,000 hrs, IP rating-IP65, Surge Protectio Upto 3KV including taking down complete all as specified and directed. Make : Luker (Product Code-LOUR6)/CG/ Technolite

Supply & fixing of outdoor garden light 20W die cast aluminium housing dark gray surface mounted Flood light outdoor use, colour warm white, Input Voltage-AC 100V-265V, PF-> 0.9, Power consumption 20W + 10% Rated Frequency- 50Hz, luminus flux - > 2000 Lm, LED light source - COB,Color Rendering Index (CRI) > 80, Colour Temperature - 3000K(WW), Working Temperature - 0oc to 500c , Rated life > 50,000 hrs, IP rating-IP65, Surge Protectio Upto 3KV complete all as specified and directed. Make Luke (Product Code-LODSP20)/CG/ Philips/ GE

Supply & fixing of outdoor Wall light 2 x 3W die cast aluminium housing dark gray wall mounted outdoor use, colour warm white 3000K, Input Voltage-AC 140V-265V, PF-> 0.9, Power consumption 6W + 10% Rated Frequency- 50Hz, luminus flux - > 600 Lm, LED light source - COB,Color Rendering Index (CRI) > 80, Colour Temperature - 3000K(WW), Working Temperature - 0oc to 500c , Rated life > 50,000 hrs, IP rating-IP65, Surge Protectio Upto 3KV complete all as specified and directed. Make Luke (Product Code-LODSQUPD10D)/CG/ Philips/ GE

Chinmaya Enteprises

M/s Vinod Yadav