Gopal Nagar OHT

Amount

15.53.2 Dismantling of C.I.sluice valve including stacking of useful material within a lead of 50 metres - above 150mm diameter.

15.2.1 Demolishing cement concrete manually/by mechanical means including disposal of material within 50 metres lead - nominal concrete 1:3:6 or richer mix (i/c equivalent design mix).

15.2.2 Demolishing cement concrete manually/by mechanical means including disposal of material within 50 metres lead - Nominal concrete 1:4:8 or leaner mix (including equivalent design mix)

2.10.1.2 Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolida- ting each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m - all kinds of soil - pipes, cables etc , exceeding 80mm dia but not exceeding 300 mm dia.

2.25 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.

2.27 Supplying and filling in plinth with river sand under floors, including watering, ramming consolidating and dressing complete.

4.1.10 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work upto plith level - 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40mm nominal size).

4.1.3 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work upto plith level - 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size).

31.47.4 Providing flanged joints to double flanged C.I./D.I. pipes and specials including necessary bolts, nuts, rubber insertion and testing of joints etc.,complete - 150mm diameter pipe.

31.47.5 Providing flanged joints to double flanged C.I./D.I. pipes and specials including necessary bolts, nuts, rubber insertion and testing of joints etc.,complete - 200mm diameter pipe.

31.47.6 Providing flanged joints to double flanged C.I./D.I. pipes and specials including necessary bolts, nuts, rubber insertion and testing of joints etc.,complete - 250mm diameter pipe.

31.48.8C Providing and fixing C.I. Ball type non return valve (PN1) conforming to IS 318 & IS 1363, with bolts, nuts, rubber insertion etc., complete (the tail pieces if required will be paid separately) - 150 mm dia.

31.52.2 Constructing masonry Chamber 90 x 90 x100 cm inside with 35 class designation brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm top diameter 160 mm bottom diameter and 180 mm deep (inside) with chained lid and R.C.C. top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design - with brick class designation 35.

31.53.2 Constructing masonry Chamber 120x120x100cm inside with 35 class designation brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm top diameter 160mm bottom diameter and 180mm deep (inside) with chained lid and R.C.C top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) necessary excavation foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick finished with a floating coat of neat cement complete as per standard design - with bricks class designation 35

31.128. 1C Providing and laying Cast Iron Double flanged pipe conforming to IS specification 1537&7181 and ISI marked suitable for flanged joints in good condition including transportation of C.I.pipe from production centre/company to the site at UT of Puducherry, lowering to the trenches (or fixing in over head tanks above ground level) laying to proper grade and alignment, testing of joints with required testing equipment etc., complete all as per IS 3114 and CPWD specification . (earth work and jointing of pipes with rubber insertion will be paid separately) -150mm dia.

31.128. 1D Providing and laying Cast Iron Double flanged pipe conforming to IS specification 1537&7181 and ISI marked suitable for flanged joints in good condition including transportation of C.I.pipe from production centre/company to the site at UT of Puducherry, lowering to the trenches (or fixing in over head tanks above ground level) laying to proper grade and alignment, testing of joints with required testing equipment etc., complete all as per IS 3114 and CPWD specification. (earth work and jointing of pipes with rubber insertion will be paid separately) -200mm dia.

31.130. 1A Providing and laying in position flanged C.I. specials such as tees, bends, collors, tapers, caps etc.conforming to IS specification 1538 and ISI marked - 80 to 200mm dia.

31.130. 1B Providing and laying in position flanged C.I. specials such as tees, bends, collors, tapers, caps etc.conforming to IS specification 1538 and ISI marked - 250 to 400mm dia.

31.131. 1D Providing and fixing Cast iron flanges conforming to IS specification 1538 and ISI marked. - 200 mm dia.

31.161. 1J Providing, laying and jointing UPVC pipes (Finolex / jain / Supreme / Truebore / Nandi) (0.6 Mpa) conforming to IS specification 4985 and ISI marked including transportation to the site, lowering to the trenches, laying to proper grade and alignment, testing of joints with required testing equipment, including cost of solvent cement, excluding UPVC specials such as bends,tees, threaded pieces, couplers, reducer, endcaps etc.,complete all as per IS and CPWD specification. - 200mm dia.

31.161. 1H Providing, laying and jointing UPVC pipes (Finolex / jain / Supreme / Truebore / Nandi) (0.6 Mpa) conforming to IS specification 4985 and ISI marked including transportation to the site, lowering to the trenches, laying to proper grade and alignment, testing of joints with required testing equipment, including cost of solvent cement, excluding UPVC specials such as bends, tees, threaded pieces, couplers, reducer, end caps etc., complete all as per IS and CPWD specification. - 160mm dia.

31.172. 1H Providing and fixing in position UPVC moulded tail piece without flange (Finolex / jain) (0.6 Mpa) conforming to IS 7834 part II and ISI marked,including labour charges for jointing, jointing materials etc, complete - 200mm dia.

31.175. 1F Providing and fixing in position UPVC fabricated coupler (Finolex / jain) (0.6 Mpa) conforming to IS 7834 part II and ISI marked,including labour charges for jointing, jointing materials etc,complete - 160 mm dia.

31.178. 1F Providing and fixing in position UPVC fabricated bend (Finolex / jain) (0.6 Mpa) conforming to IS 7834 part II and ISI marked, including labour charges for jointing, jointing materials etc, complete - 160 mm dia.

31.178. 1H Providing and fixing in position UPVC fabricated bend (Finolex / jain) (0.6 Mpa) conforming to IS 7834 part II and ISI marked, including labour charges for jointing, jointing materials etc, complete - 200 mm dia.

31.278. 1A Erection, testing and commissioning of the centrifugal motor pumpset with pipe fittings, etc. complete.- 15 HP to 25 HP motor.

31.300. 1A Supply and installation of DI D/F Gate Valves (Soft seated ) Resilient seated soft sealing gate valves (Sluice valves ) (Make VAG, AVK, Fouress) with body bonnet of ductile iron of grade GGG 40, wedge fully rubber lined EPDM of good quality W720 , replaceable spindle nut, without gland packing and with 3 O-ring protection on the shaft and seals of NBR and the valves should be vacuum tight and 100% leak proof with face to face dimensions as per BSS 163-89/ISI 4846 - 2000/DIN3202 F4. All the valves should be Electrostatic powder coated both inside outside with pocket less straight thro body passage. All the valves shall be compatible for burried application without chambers, with pressure rating PN 10/16 - dia 150mm.

31.300. 1B Supply and installation of DI D/F Gate Valves (Soft seated ) Resilient seated soft sealing gate valves (Sluice valves) (Make VAG, AVK, Fouress) with body bonnet of ductile iron of grade GGG 40, wedge fullyrubber lined EPDM of good quality W720 , replaceable spindle nut, without gland packing and with 3 O-ring protection on the shaft and seals of NBR and the valves should be vacuum tight and 100% leak proof with face to face dimen-sions as per BSS 163-89/ISI 4846 - 2000/DIN3202 F4. All the valves should be Electrostatic powder coated both inside outside with pocket less straight thro body passage. All the valves shall be compatible for burried application without chambers, with pressure rating PN 10/16 - dia 200mm.

1.1.1a(ii) Disposal of excaved earth with in a lead of 3Km radius beyond the intial of 50mm and filling in road side low lying areas and flood banks marginal banks etc. and the conveyed earth shall be neatly levelled and dressed in all kinds of soil etc complete as directed by the Engineer-in charge

9.1.2Q Providing wood work in frames of doors, windows, clerestory windows and other frames , wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately) - Vegesa/ Bandaru wood

9.5.12Q Providing and fixing panelled or panelled and glazed shutters for doors, windows, and clerestory windows, including ISI marked M.S.pressed butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately , all complete - Vegesa / Bandaru wood - 30 mm thick shutters.

9.7.1Q Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors , windows and clerestory windows (area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick -Vegesa/ Bandaru wood.

9.48.2 Providing and fixing M.S.grills of required pattern in frames of windows etc with M.S. flats , square or round bars etc. including priming coat with approved steel primer all complete -Fixed to openings/wooden frames with rawl plugs screws etc.

9.53 Providing 40 X 5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bots, nuts and wooden plugs and embeddings in cement concrete block 30 x10 x 15 cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size).

9.56.1 Providing and fixing ISI marked IS :1341 , M.S. heavy weight butt hinges with necessary screws etc. complete - 125 X 90 X 4.00 mm.

9.56.2 Providing and fixing ISI marked IS :1341 , M.S. heavy weight butt hinges with necessary screws etc. complete - 100 X 75 X 3.50 mm.

9.96.1 Providing and fixing aluminium sliding door bolts , ISI marked , anodised ( anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade , with nuts and screws etc complete - 300 X 16 mm

9.96.2 Providing and fixing aluminium sliding door bolts , ISI marked , anodised ( anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade , with nuts and screws etc complete - 250 X 16 mm.

9.97.5 Providing and fixing aluminium tower bolts, ISI marked , anodised (anodic coating not less than grade AC 10 as per IS :1868) , transparent or dyed to required colour or shade , with necessary screws etc. complete - 100 x10 mm

9.119 Providing and fixing factory made P.V.C. door frame of size 50x 47 mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 nos , of 150mm long brackets of 15 x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19 x19 mm M.S.square tube of 19 gauge , EPDM rubber gasket weather seal to be provided through out the frame . The door frame to be fixed to the wall using M.S.screws of 65 / 100 mm size, complete as per manufacturter's specification.

9.120.1 Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15 x15 mm for top & bottom rails. M.S.frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC 'C' channel of size 30mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top , bottom and lock rails shall be provided both side of the panel. 10mm (5 mm x 2) thick , 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail , panelling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded / sealed to the styles & rails with 7 mm (5 mm + 2 mm) thick x 15 mm wide PVC sheet beading on inner side , and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the 'C" Channel using PVC solvent adhesive etc. complete manufacturer's specification & drawing - 30mm thick plain PVC door shutters

14.43 Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scrarches etc.complete.

13.48.1 Finishing with deluxe multi surface paint system for interiors and exteriors using primer as per manufacture's specification - Two or more coats applied on walls @ 1.25 ltr / 10 sqm over and including one coat of special primer applied @ 0.75 ltr / 10 sqm

14.54.1 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade - One or more coats on old work.

13.48.2 Painting wood work with deluxe multi surface paint of required shade. Two or more coat applied @0.90 ltr / 10sqm over an under coat of primer applied @ 0.75 ltr / 10 sqm of approved brand and manufacture.

31.255. 1C Supplying and fixing of 7.5KVAR power capacitor (CG/ L&T/ Siemens make) for 15 HP motor complete.

31.255. 1E Supplying and fixing of 12.5KVAR power capacitor (CG/L&T/ Siemens make) for 25 HP motor complete.

31.256. 1B Supplying and fixing of fully automatic air break star-delta starter range for 10A to 23A F.A.S.D. (Bharat Culter Hammer/ L&T/ Siemens make) with suitable M.S. angle frame etc., complete.- 15HP to 17.5 HP pumpsets etc. as directed by the Engineer-in-charge.

31.257.1 Supplying and fixing of DOL starters 0.5 HP to 5 HP with relay range 0.63 A to 13 A with suitable M.S. angle frame complete.

31.256. 1C Supplying and fixing of fully automatic air break star-delta starter range for 13A to 25A F.A.S.D. (Bharat Culter Hammer/ L&T/ Siemens make) with suitable M.S. angle frame etc., complete.- 20HP to 25HP pumpsets -(ML-1.5)

31.258. 1A Supplying and fixing of 1x3x4 sqmm (single run) PVC insulated copper submersible flat flexible cable of Finolex make complete.-upto 10HP pumpset.

31.258. 1C Supplying and fixing of 1x3x10 sqmm (single run) PVC insulated copper submersible flat flexible cable of Finolex make complete.-above 20HP pumpset.

31.262.1 Supplying and fixing of teak wood aerial board with 100 Amps HRC fuse base and fuse link and suitable post clamp to hold the G.I. Pipe with electric post including bolts and nuts etc., complete.

31.263.1 Making earth pit of G.I. pipe for earthing in earth pit with 40mm dia. G.I. pipe medium class of length 3.05m perforated with 46 Nos of 12mm dia. holes, pipe lowered in bore holes of 150mm dia. and filled in with charcoal and salt in alternative layer of 300mm, the top of G.I. pipe shall be clamped. Earth pit shall be provided with 60cm dia precast ring with 60cm depth alround, covered with R.C.C. precast slab etc. as per I.E. standards.

31.276. 1B Supplying of electricallly operated horizontal split casing pump and motor (JYOTHI/ KIRLOSKAR/ BEACON) make AC 3 phase, 415 volts,50 HZ,1500 PM,squirrel cage motor.The pump shall have bronze impeller, high grade steel shaft, flexible coupling set,including the cost of common, M.S. Base plate, foundation bolts,etc. complete with suitable suction and delivery sizes.(20 HP centrifugal motor and pumpset).

31.277. 1B Supplying and fixing of 25 X 25 mm size vaccum pump (KIRLOSKAR/MAXWELL/ EKKAR) make 3 phase monoblock motor and pumpset complete.-2.2KW/ 3 HP.

2.2.1 Providing and fixing following rating and breaking capacity per MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel baorad including drilling holes in cubicls panels , making connections , etc. as required - 100 A . 16 kA.

Basic Code Sl.No. E125 Supplying and fixing of 200A four pole change over switch etc. as directed by the Engineer-in-charge.

Basic Code Sl.No. E381 Supplying and fixing of 100A porcelain fuse etc. as directed by the Engineer-in-charge.

Basic Code Sl.No. E388 Supplying and fixing of 125A HRC fuselink etc. as directed by the Engineer-in-charge

Basic Code Sl.No. E403 Supplying and fixing of 32/63/100/200A HRC fuse base etc. as directed by the Engineer-in-charge.

Basic Code Sl.No. E577 Supplying and fixing of Toggle switch etc. as directed by the Engineer-in-charge.

Basic Code Sl.No. 7744 Supplying and fixing of M.S.pipe 200mm dia casing pipe etc. as directed by the Engineer-in-charge.

Basic Code No. 1101 Supplying and fixing of 1.5sq.mm ISI maked,FRLS PVC insulated, single core copper conductor cable (multistrand) etc. as directed by the Engineer-in-charge.

Basic Code No. 1102 Supplying and fixing of 2.5sq.mm ISI maked, FRLS PVC insulated, single core copper conductor cable (multistrand) etc. as directed by the Engineer-in-charge.

Basic Code No. 1105 Supplying and fixing of 10 sq.mm ISI maked,FRLS PVC insulated, single core copper conductor cable (multistrand) etc. as directed by the Engineer-in-charge

Basic Code Sl.No 1211 Supplying and fixing of 60W LED Street Light Fitting(Orbit) etc. as directed by the Engineer-in-charge.

Basic Code Sl.No. 1215 Supplying and fixing of 40 Watts Fluorescent Tube (Philips / Crompton / Wipro) etc complete as directed by the Engineer-in-charge.

Basic Code No. 1708 Supplying and fixing of 6 A to 32 A ratings , DP MCB , "C" curve , 10kA breaking capacity etc. as directed by the Engineer-in-charge.

Basic Code Sl.No. 1716 Supplying and fixing of 100 A , 4 pole isolator etc. as directed by the Engineer-in-charge.

Basic Code No. 3051-O Supplying and fixing of 1 x 40W box type single tube light fitting with copper choke & starter without tube. Make: Philips/ Bajaj etc. as directed by the Engineer-in-charge.

Basic Code No. 3127-O Supplying and fixing of 1200mm sweep double ball bearing ceiling fan Make:Almonard/Usha etc. complete as directed by the Engineer-in-charge.

Basic Code No. 3309B Supplying and fixing of 40A power contactors Make: Siemens / L&T etc. as directed by the Engineer-in-charge

Basic Code No. 3328 Supplying and fixing of Timer switch (daily)/ digital time switches daily programme with standby battery (3yeas) 1channel. Make:L&T-Hagger/ Legrand-Lexic etc. as directed by the Engineer-in-charge

LUCKY INFRA

M.S.B.VENKATESWAR