Painting Work

Amount

Following works are to be carried out and completed at Various Substations under ETD-I, Lucknow.

Spray/Brush Painting work of various equipments will be done after removing all foreign material from the surface. The surface to be painted is to be cleaned again and again by dry cotton and steel wire brushes. After proper cleaning red oxide primer is to be applied on the surface to be painted and left to be dried for 24-48 hrs.After drying of red oxide primer the surfae is to be painted by smoke grey paint of best quality in two coats on the follwing equipments.(Note. The second coat shall be applied when 1st coat of Paint Is done and checked by SDO (M) / J.E (M) concerned)

AT 132KV S/S Martinpurwa

132 KV CBs

132 KV CT/PT/CVT

132 KV CT/PT/CVT Junction Box

33 KV CT/PT

33 KV Isolator, Junction Box/SW Yard Lighting Box

ACDB outdoor (Bay Marschling cubicle in SW Yard )

AT 132KV S/S SGPGI

132 KV CBs

132 KV CT/PT/CVT

132 KV CT/PT/CVT Junction Box

33 KV CT/PT

33 KV Isolator, Junction Box/SW Yard Lighting Box

ACDB outdoor (Bay Marschling cubicle in SW Yard )

33/0.4 KV Station Transformer

Brush painting of complete surface of the cage fencing height approx 1.6 meter including its runner frame etc. around the switchyard area of capacitor bank after due cleaning and finally applying one coat of red oxide primer and two coats of black colour 1st quality synthetic enaemel paint(i.e Asian,Berger etc).

AT 132KV S/S Martinpurwa

AT 132KV S/S SGPGI

Servicing, greasing and overhauling of shutter for smoth working without any noise and jerk. Scrubbing, Rubbing and painting of shutters with good quality of standard make paint like Berger/ Asian Paints after proper use of the primer.

AT 132KV S/S SGPGI

Store Room (3.3x3.2m)

Store Room (2.3x1.98)

AT 132KV S/S Martinpurwa

Store Room (2.3x1.98)

Powertech Engineers (BID ID -5756879)

Hi-tech power transmission (BID ID -5756475)