Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹33.0 LAccepted-AOC | L1 | Accepted-AOC BEING L1 | |
| 2 | L2₹34.4 L+₹71,996 (2.14%)Rejected-Finance CHAITALI NIWAS OPP PANCHAMOTI HOUSING SOCIETY VIJAY NAGAR DEOLALI CAMP NASHIK 422401 | NASHIK | MAHARASHTRA | 422401 | L2 | Rejected-Finance BEING NOT L1 | |
| 3 | L3₹34.8 L+₹1.1 L (3.33%)Rejected-Finance | L3 | Rejected-Finance BEING NOT L1 | |
| 4 | L4₹34.8 L+₹1.2 L (3.44%)Rejected-Finance | L4 | Rejected-Finance BEING NOT L1 | |
| 5 | L5₹35.4 L+₹1.8 L (5.31%)Rejected-Finance 154 HANUMAN MANDIR DIKSHI TAL NIPHAD DIST NASHIK 422 302 | NASHIK | MAHARASHTRA | 422302 | L5 | Rejected-Finance BEING NOT L1 |
Tender Value
₹34 L
EMD Value
₹68,000
Closing Date
22 Nov 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE AF OJHAR
GE AF OJHAR
REPAIR REPALCEMENT OF MES INSTALLATION AT VARIOUS PLACES AND WELCOME MAINTENANCE OF MD ACCN AT AF STATION DEOLALI
2022_MES_554931_2
8917/E8
Open Tender
Civil Works
Item Rate
335 days
DEOLALI
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE AF OJHAR
₹68,000
Yes
10 Dec 2022
15 Nov 2022
24 Nov 2022
16 Nov 2022
22 Nov 2022
17 Nov 2022
Amount
M&L for preperation of old decorated or unplastered surfaces by brooming down and steel wire brushing , scapping , down smoke soot, moulds , moss and efflorescent salts and grasy spot etc, and applying one coat of white wash on walls including all cornices etc.
All as per item No 01 here - in - before but on ceiling
M&L for preparation of old decorated plastered surfaces of walls by washing, rubbing down and stopping of distempered and painted surfaces and applying one coat of distemper oil emulsion (White or tinted) including all conices etc complete all as specified and directed by the Engr in Charge..
M&L for complete removal of existing treatment, filling up undulation and applying one layers readymixed wall putty (Birla, Asian & equilevent) on entire surface of wall/ceiling etc cutting and finishing with appropriate sand paper and applying two coat of oil bound distemper (White or tinted) over a one caot of primer after smoothening of surfaces complete of wall and ceilling.
M&L for preparation of old painted wooden surface or wood based materials of any description, not otherwise described, over 10 cms widths or girth and applying one coat of synthetic enamel paint complete all as specified.
M&L for preparation of old painted wooden surface of any description not exc 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified.
M&L for preparation of old painted steel surface of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified.
Taking down cement plaster of any description, on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc complete.
M & L 15 mm thick rendering in cement mortar 1:6 on fair faces of brick or concrete surfaces, finished even and fair complete.
M & L 15 mm thick rendering in cement mortar 1:4 on fair faces of brick or concrete surfaces, finished even and fair complete.
M & L for prepariation of New plastered surfaces and applying two coats of distemper oil emulsion including chalk whitening preparatory to distempering on surfaces of walls.
M & L for prepariation of new plastered surfaces and applying two coats of cement base paint over a coat of alkali resitant primer on surfaces of walls.
Dismantling of stone slab of any description including cement mortar bedding but not backing.
Demolition of reinforced cement concrete (Reinforcement cut as required to facililate demolition)) in ground floors (below or above ground level ) not exceeding 15 cm thickness
Mild steel TMT 10 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips.
M & L for reinforced cement concrete type B-1, 1:2:4 (using 20 mm graded granite stone aggregate) in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like.
M&L for fair finished flat form work to soffits of suspended slabs such as roof slabs, floor slabs, cooking plateform and similar work not exc. 200 mm thick.
M&L for rough finished form work to edge of concrete slabs, breaks in floors, etc exc 5 cm but not exc. 20 cm wide
M&L granite (of any type) work ( table rubbed & polished), 18 to 20mm thick, in steps, jambs, pillars, window-cill, cooking platforms & like in cement mortar (1:4) including polishing of chamfered edges and pointing in white cement using marble dust with admixture of pigment to match with shade of granite over and including 15mm thick screed bed in CM (1:6).
M&L Machine cut cudappah stone slab 20mm to 25 thick, over and including cement screed bed in CM 1:6 laid and jointed in grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete
Chamfer, splays, or arris in facework of granite exc 15mm wide but nexc 50mm wide
M&L for drilling holes for pipes etc in granite /cadappa n exc 25mm dia
Demolition of cement concrete (unreinforced) in ground floors (below or above ground level ) not exceeding 15 cm thickness
M&L 75mm thick PCC 1:3:6 mix type C2 as in plinth protection and surface to be finished without using extra cement .
M & L cement concrete 1:2:4 type B-0 (using 12.5 mm graded stone aggregate ) as in 25 mm thick flooring finished even and rough as in sub base
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) complete all as specified and directed.
M&L mat finish ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 but not exceeding 0.18 sqm,(400x400) in floors etc over and including 15 mm thick screed bedding in CM 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface complete all as specified and directed.
M&L mat finish ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 but not exceeding 0.18 sqm,(400x150) in skirting etc over and including 10 mm thick bedding layer in CM 1:4 set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface complete all as specified and directed.
M&L for Glazed ceramic tiles in vertical surface 450x 300x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match and including 15mm thick bedding layer/ backing coat in CM 1:4 complete all as specified and directed.
M & L for coloured (light shade) vitrified ceramic tiles 10mm thick (Square/rectangular) polished, area of each tiles n. exc 0.36 Sqm in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match and the shade of the tiles including 15mm screed bed or bedding layer CM 1 : 6 .
M & L for coloured (light shade) vitrified ceramic tiles 10mm thick (Square/rectangular) polished, area of each tiles n. exc 0.36 Sqm in skirting, set and jointed in neat cement slurry and pointed in coloured cement to match the shade of the tiles including 15 mm screed bed or bedding layer CM 1 : 6 .
Dismantling wall and ceiling boards, AC building boards/ slabs/ blankets any thickness, , complete all as specified and directed by Engr- in-charge.
M & L for false ceiling work of aluminium snap grid system size 605x605mm for false ceiling with aluminium angles of size 23.5 mmx23.5,,x1.5mm fixed to wall with GI screws and aluminium tee of size 37.5x37.5x1.5mm in main and cross runners fixed 60 cm c/c including 3 mm dia hanging GI wire(upto necessary required length & 1.2 Mtr c/c) fixed to slopping roof (rafter/purlin/trusses) complete all as specified.and tied to existing roof/truss/rafters complete
M & L Non asbestos fibre cement building boards 4 mm thick (one side embosed design), fixed or laid/ inserted to Aluminium grid frame work in ceiling with clips all as specified and directed.
M & L for fixing in repairs non asbestos fibre cement building boards 4 mm thick, fixed or laid/ inserted to aluminium grid frame work in ceiling with clips complete all as specified and directed by Engr-in-Charge.
Cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes etc water tank of capacity exc 500 ltr nexc 1000 ltrs. complete all as specified and as directed
Taking up or down steel water tubing and connecting incl cleaning for refixing or removal to stores for 20mm bore. complete all as specified and as directed
Refixing 20mm dia old steel water tubing and connecting in new or old position with S&F all fitting complete all as specified and as directed
M&L GI tubes medium grade 20mm bore fixed complete to wall or laid in floor. complete all as specified and as directed.
Taking up or down steel water tubing and connecting incl cleaning for refixing or removal to stores for 15mm bore.
S & F GI tubing 15 mm bore medium grade with all fittings & fixed complete to walls or laid in floors.
Refixing 15mm dia old steel water tubing and connecting in new or old position with S&F all fitting complete all as specified and as directed
Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth in brick/stone wall
S & F in repair 15 mm bore fancy type chromium plated bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule.
S & F in repairs 15 mm bore Fancy type pillar taps, cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed.
S & F in repair fancy type chromium plated 15 mm bore Stop valves, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions.
S & F in repair 20 mm dia Gun Metal, globe or Gate Valve with Iron wheel head Screwed both ends for Iron Pipe and fixed.
S & F in repairs fancy type chromium plated with long shank and cup (Concealed type) 15 mm bore Stop valves, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions.
S & F in repairs ball valves, high pressure of PTMT with epoxy coated aluminium rod & highdensity plastic ball and fly nut complete, screwed for iron pipe of 20mm dia ( Minimum weight 210 Gms)
S & F in repairs bib taps standard fancy type of PTMT any colour, high pressure screwed for iron pipe or for brass ferrule of 15mm dia (minimum weight 15mm-90gms).
S & F in repairs Chromium plated shower rose 75 mm dia with CP arms with swivel joints, including fixing to steel pipe or union.
S & F in repair vitreous china wash down water closet (Pedestal) including white PVC seat cover closed pattern with flat bottem and cover and mild steel chromium plated hinge device,connection to drain or outgoing pipe and to flushing pipe, antisyphonage pipe joint to socket or stoper etc, white (EWC).
M&L in repair plastic water closet white seat cover closed pattern with flat bottem and cover and mild steel chromium plated hinge device,
S & F in repair Vitreous China Squatting pan, Orissa pattern, size 580 x 440 mm white with `P' or `S' trap, front or back inlet and integral foot rests including connection to trap, to flushing pipe etc. complete including making good to floor.
S & F in repairs wash hand basins, vitreous china( flat back) white of size 550mm X 400mm including cutting for and pinning in ends of brackets or erecting stand including waste fitting, brass chromium plated 32 mm size with long screwed shucks and fly nuts and including PVC discharge pipe as specified.
S & F in repair high/low level PVC flushing cistern of syphonic action type 10 ltr capacity fixed to wall with bracket and screwed including PVC flush pipe complete fitting including taking out unserviceable flushing cistern and flush pipe etc.
S & F PVC connections suitable for 15 mm dia pipe with PTMT nut of length 600 mm.
S & F in repairs gratings doom 100mm dia of PTMT ( minimum wt 25gms)
S & F PVC (SWR) floor trap of 75 mm outlet plain with grating including jointing with solvent cement.
S & F 40 mm bore low density polyethylene pipes (LDPE) of pressure rating 6 Kgf/ Sq. Cm., fixed complete to walls, ceilings or in floors etc.
S & F in repair brass chromium plated tubular towel rail, 20 mm dia., D Type, 60 cm long between flanges.
S & F in repair Sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers; including waste coupling with pipe, bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe over all size 915 mm x 460mm bowl size 410mmx330mmx160mm.
S & F in repair stainless steel kitchen plate rack of 1 mm thick of size not lessthan 900 mm x 750 mm fixed with stainless steel screw all as specified and directed by Engr in charge. (Make: Bluestar, Nirali, Prayag )
S&F PVC flexible downtake waste pipe 32 mm dia for WHB / Sink
S&F waste coupling of stainless steel with brass nut suitable for stainless steel sink complete (Make: Prayag)
Resecuring or easing & adjusting without taking down of shutters of any description not exceeding 1 Sqm each.
Resecuring or easing & adjusting without taking down of shutters of any description exc 1 Sqm but nexc 2 Sqm each.
Refixing and easing in same opening shutters of any description exc 1 Sqm but not exceeding 2 Sqm each.
Taking down chowkats or frames n. exc.1.5sq m each with shutters (without taking off shutters from the frame).
S&F factory made solid PVC door shutter 30 mm thick (Style) consisting of frames made out of MS tubes for top and bottom rails MS frame shall be covered with heat noulded plain colour PVC with solvent cement for tiles and plain colour PVC sheets for top rail and bottom rail panellng of plain colour PVC sheet to be fitted in the MS frame welded sealed to the stiles & rails with suitable PVC sheets beading and jointing together with solvent in the frame at site as per specification and drawing
S&F Solid PVC door frame of size 50x47mm made of 5mm plain colour PVC sheet reinforced with MS square tube suppling & fixed in opening as per specification
Hacking out old broken glass (any thickness, size, quality or description) from wooden/steel frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads
S&F 3mm thick ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane
M & L for prepariation of new or previously untreated steel and iron surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint (ordinary tint) over a coat of red oxide
M & L for prepariation of new or previously untreated steel surfaces of any description, nexc 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide.
S&F 100mm long Butt hinges, medium weight, cold rolled mild steel, and fixed
S&F 100mm long Butt hinges, extruded aluminium ally with galvanished mild steel hinge pin anodisedand fixed type B-21
S&F 75mm long Butt hinges, medium weight, cold rolled mild steel, and fixed
S & F in repairs 150 mm long Aluminium, anodised, barrel tower bolts of extruded section.
S & F in repair 100 mm long Aluminium, anodised, barrel tower bolts of extruded section.
S & F in repair 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised.
S & F in repair 100 mm long extruded aluminium alloy handles, fabricated type, anodised.
S&F in repairs 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed
M&L fixed as in repairs Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples
S & F in repair hasp and staple of size 100 mm, safety type, aluminium anodised with mild steel hinge pin including bolt to hing plate and fixed with screws.
S&F in repair mild steel 150 mm, ordinary rat tail rod pattern springs including roller and roller plate complete
S & F in repairs floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, overall length of cover plate 150 mm.
S & F second class hard wood plain fillets square, rectangular or triangular in section, wrought secured with nails, cross sectional area exceeding 3 and not exceeding 6 Sq. cm.
M & L in repair for 18/19 mm thick prelaminated particle board, interior grade prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work in cup board shutters, partitions, shelves and similar work including taking down olds shutters/shelves.
M&L in repair 12mm thick plywood, grade BWR, type BB, fixed with nails to timber frame works
M&L for external teak wood lipping, 6mm thick fixed with nails for particle board of 18/19 mm thick
S&F in repair pre coated curtain rod 25 mm dia fixed with fancy type matching pair of brackets fixed with screw (Note: Brackets for this item will inlcude center brackets, side wall mounted and end brackets)
M&L for welding hinges to door shutter etc (Butt hinhes to be paid separately)
S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doo0rs etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete confirming to Fe 410-W(Gde-E-250) quality B.
Demolition of brickwork or stone/boulder masonry built in cement mortar including all quoins, arches, pillars but excluding precast concrete articles etc all as specified & as directed by Engr-in-Charge.
M&L for brick work with old size sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 all as specified
M&L for brick work with old size sub class 'B' bricks straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 all as specified.
Dismantling water storage tank 250 ltrs & n.exc. 500 ltrs all as specified
M&L Rotational moulded polyethylene water storage tanks of 500 ltr capacity (cylinderical verticla with closed top ) hoised and fixed in position all as specified in SSR part I
Dismantling water storage tank 500 ltrs & n.exc. 1000 ltrs all as specified
M&L Rotational moulded polyethylene water storage tanks of 1000 ltr capacity (cylinderical verticla with closed top ) hoised and fixed in position all as specified in SSR part I
Taking down carefully aluminium/copper point wiring (light,fan,socket power etc) on TW batten/PVC casing capping, surface steel/PVC conduit excluding all fitting/fixtures and making good disturbed surfaces of wall/floor/ceiling etc to match the adjoining surfaces.
M&L for point wiring complete with two single core, PVC insulated, unsheathed, multi stranded bright annealed copper conductor cable, 1.5 Sq.mm 1100 Volts, FRLS grade drawn through and including heavy duty PVC casing and capping not less than 25 mm width and accessories surface mounted on walls, ceilings etc. on & including PVC box and plate for mounting switches, sockets, regulators etc and one run of 1.5 Sq.mm PVC insulated, unsheathed, multistranded, copper conductor cable FR grade as earth wire and connected to common earth dully complete for One light/fan point controlled by one switch
All as per item no-105 above but One 3 pin socket out let 5 Amps on same board.
All as per item no-105 above but One 3 pin socket out let 5 Amps on independent board.
All as per item no-105 above but One bell point controlled by one bell push
All as per Sl item No 105 above but with two runs of 2.5 Sq.mm cable and one run of 1.5 Sq.mm cable as earth wire for one 3 pin socket outlet/power point 15 Amps controlled by one switch.
S & F in repair Bell electric ding dong AC 230 V single pole complete all as specified and directed. Make : Anchor/Cona/Standard
S & Fin repair Modular Bell push 6A,1way, 1module, complete all as specified and directed.Make Anchor Roma/Legrand Aretor/Crabtree
S & F in repair Modular Fan Regulator electronic rotary,0-4 steps step type 100 Watt, 240 Volt 50 Hz hum free 2 module complete all as specified and directed.Make Anchor Roma/Legrand Aretor/Crabtree
Supply and fixing in repair switch modular 6 Amps 230 Volts one way switch. Make Anchor Roma/Legrand Aretor/Crabtree
Supply and fixing in repair switch modular 6 Amps 230 Volts Two way switch. Make Anchor Roma/Legrand Aretor/Crabtree
S&F in repair Switch modular type AC 230 volts 16/20 Amps one way complete all as specified and as directed. Make Anchor Roma/Legrand Aretor/Crabtree
S&F in repair Socket modular 6 Amps AC 230 Volts 2/3 pin combined 2 module complete all as specified and as directed. Make Anchor Roma/Legrand Aretor/Crabtree
S & F in repair Socket modular 6A/16 Amps-2/3 pin combined AC 230 Volts 2/3 pin combined 2 module complete all as specified and as directed. Make Anchor Roma/Legrand Aretor/Crabtree
S&F in repairs Ceiling rose surface type, PVC/Polycarbonate isulated body size 50x28 mm two to three terminals.
S&F in repairs PVC rectangular board 100mm x 100 mmx 50mm deep. Make : Presto Teak/Modi/pressfit
S&F in repairs PVC rectangular board 175mm x 100mmx50mm deep. Make : Presto Teak./pressfit
S&F in repairs PVC rectangular board 200mmx150mmx50mm deep. Make : Presto Plast./pressfit
S&F in repairs PVC rectangular board 250mmx200mmx50mm deep. Make : Presto Teak./pressfit
S&F in repairs PVC rectangular board 350mmx300mmx50mm deep. Make : Presto Teak./pressfit
Disconnect and insulate electric supply wire and taking down carefully ceilling/ exhaust/cabim/wall fan of any make and sweep dismantlling blades, check for repairs required including replacement of flexible PVC insulated copper conducor of size 0.75 sqm and rubber bushesh ( Note : repair replacement spares shall be carried under relevent items of this schedule)
Hanging only ceiling fans of any make and sweep connecting the complete with & including provision of copper conductor cord 3 core PVC insulated and sheathed from ceiling rose to fan connector and testing as all as specified and as diected by Engr in charge.( Note: The fan shall be fitted with new set of clamps, rubber shackle split pins and top and bottom nut bolts etc.)
Hanging/fixing only exhaust/cabin/wall fan of any make or sweep connecting up complete with and including provision of copper conductor cord 3 core PVC insulated and sheathed from celing rose to fan connector & testing as directed and specified. ( Note: The fan shall be fitted with new set of washers, nuts, rubber packing etc.)
S & F in repairs and connecting up LED light fittings 1x9/10 watt 2 feet long complete with LED rode 9/10 watt, spring loaded rotary holder, connector etc. complete and connecting up with and including 23/00.0076 size 3 core copper flexible wire from connector to ceiling rose/adoptor including all necessary fixing arrangements complete. Crompton fitting DMLN1LT8-8, 1X9/10W and LED rode LT8-8-865-2 or equivalent in Philips/Bajaj/Havells/Wipro ).
S & F in repairs and connecting up LED light fittings 1x18/20 watt 4 feet long complete with LED rode 18/20 watt, spring loaded rotary holder, connector etc. complete and connecting up with and including 23/00.0076 size 3 core copper flexible wire from connector to ceiling rose/adoptor including all necessary fixing arrangements complete. Crompton fitting DMLN1LT8-16, 1X18/20W and LED rode LT8-20-865-2 or equivalent in Philips/Bajaj/Havells/Wipro ).
S&F in repairs Sub main wiring with PVC insulated un armoured heavy duty copper conductor 1100 Volts FR grade 2 single core 6 Sq.mm cable and one run of 4 Sqmm copper earth wire for continuous earth fixed on wall/ceiling/floor etc. drawn in PVC casing capping / PVC non metallic conduit complete all as directed.
S&F in repairs Sub main wiring with PVC insulated un armoured heavy duty copper conductor 1100 Volts FR grade 2 single core 4 Sq.mm cable and one run of 2.5 Sqmm copper earth wire for continuous earth fixed on wall/ceiling/floor etc. drawn in PVC casing capping / PVC non metallic conduit complete all as directed.
Sheet metal enclosure for DB’s with bus bar , MCB SPN 8 way ,240 volts double door with detachable gland plate.
Sheet metal enclosure for DB’s with bus bar ,MCB SPN 12 way ,240 volts double door with detachable gland plate.
Material and labour for MCB SP 5 to 30 Amps 240 volts. B seires 10 KA
Material and labour for MCB SPN 40 to 63 Amps 240 volts. B seires 10 KA
Demolition of any description, in any position and any thickness not otherwise specifically provided all as specified and directed.
M & L for hardcore (Broken stone or boulders-granite/basalt ) of gauge n.exc 63mm, deposited, spread and levelled in layers n.exc 15cm thick, watered and rammed to a true surface all as specifed and directed.
M&L for 100 mm thick cement concrete type B-2, 1:2:4 (using 40mm graded aggregates) as in path/PCC road/hardstanding and PCC should be laid in alternate ways and the area of one panel should not be exc 10 Sqm/each all as specified and directed by Engineer-in-charge.
M & L for finishing the surface of concrete roads/paths/hardstanding by brooming all as specified and directed by Engineer-in-Charge.
M&L for Providing, 75mm thick PCC 1:2:4 type B-2 (using 20 mm graded stone aggregate) as in footpath all as specified and directed by Engineer-in-Charge..
M &L for Forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound Grade 'A'.
M & L for 12mm thick expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound grade 'A'.
M & L 75 mm thick cement concrete 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in sub base flooring under floor all as specified and directed by Engineer-in-Charge.
M & L for machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size confirming to IS-15658-2006 of 60 mm thickness, M-35 grade all as specified and directed by Engineer-in-Charge.
M & L for sand filling under floors or in foundations including watering and consolidation as in levelling coarse for fixing of interlocking tiles all as specified and directed by Engineer-in-Charge.
S&F 30 mm Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides with two faces covered with decorative face veneer with lipping/frame to match.
S&F in repairs 15 mm dia CP brass Bib taps suitable for washing machine inlets screwed down to existing line all as specified and as directed.
M&L Chequered cement concrete tiles rubber moulded 25cm x 25cm x 25mm thick set, jointed and pointed in near cement slurry in floors, with grey cement and pigments over and including 15 mm thick screed bedding in CM 1:6 all as specified and dirtected.
M & L for plain/reinforced cement concrete Type B-1, 1:2:4 (using 25 mm graded granite stone aggregate) cast in situ in copings, bed plates and the like including weathering, slightly rounded or chamfered angles & throating and including use of form work all as specified and directed by Engineer-in-Charge..
M&L for rendering 5mm thick plaster on fair faces of brick work or concrete surfaces in CM 1:3 finished even and smooth on ceiling as specified and directed.
M & L for prepariation of newly plastered surface and applying three coats white wash in ceiling all as specified and directed by Engineer-in-Charge.
Complete removal of existing treatment of walls by steel wire brushing, prepariation of surfaces and applying two coats of distemper oil emulsion after chalk whiting or JK wall care putty 2mm thick over the walls all as specified and directed by Engineer-in-Charge.
Complete removal of existing treatment of walls by steel wire brushing, prepariation and applying two coats of cement base paint over one coat of alkali resistant priming paints or JK wall Care Putty of 2mm thick suitable for external surfaces all as specified and directed by Engineer-in-Charge.
M & L for prepariation of old surfaces of walls and applying one coat of cement base paint all as specified and directed by Engineer-in-Charge..
Complete removal of existing treatment of ceiling by steel wire brushing, prepariation of surfaces and applying three coats of white wash on ceiling all as specified and directed by Engineer-in-Charge.
M&L for complete removal of existing treatment by steel wire brushing and applying two coat of weather coat paint APEX over one coat of alkali resistant priming paints or JK wall Care Putty of 2mm thick suitable for external surface all as specified and directed by Engineer-in-Charge.
S & F in repairs 2mm thick PVC tiles/sheets, laminated plain coloured, marbled mosaic or mottled finish, laid with approved rubber based adhesive in floors all as specified and directed by Engineer-in-Charge. Note : Rates include for all cutting and waste and work in all positions as well as in narrow widths.
All as item 98 herein before but except bricks.
M & L Cement concrete 1 : 3 : 6 type C2 (using 40 mm graded stone aggregate) as foundation filling mass concrete.
M & L Cement concrete 1 : 2 : 4 type B1 (using 20 mm graded stone aggregate) as surface channel and drains.
Dismantling of CGI/PGI sheet as in roof covering including ridge .
S&F pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5 mm thick of an colour having tensile strength of 550 Mpa as in roof covering to wall fixed with self tapping screws as specified.
Dismantling wrought iron or mild steel work in any description not otherwise provided for.
S & F rolled mild steel angle/tubular/square/rectangular roof trusses (framed), trussed purlins, rails and fastenings and heavy bracket framing, confirming to Fe 410 - W including distance pieces, cleats, etc., complete.
S&F in repairs Vitreous China urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe)
S&F Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms)
S&F in repairs 15 mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed
S&F Low density polyethylene pipes (LDPE) 50 mm of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc.
M&L for cutting holes into brick/stone walls built in cement mortar 1:3 or cement lime mortar and walls of cement concrete.
Taking down chowkhats without taking down shutters area exc 1.50 sqm n exc 4.0 sqm and removing to stores
Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories)
S&F 110 mm bore PVC (SWR) soil, waste and vent pipespipes single socketed in any length with rubber ring joints fixed to walls or in floors
S&F 75 mm bore PVC (SWR) soil, waste and vent pipespipes single socketed in any length with rubber ring joints fixed to walls or in floors
S&F 110 mm bends PVC (SWR) with access door
S&F 75 mm bends PVC (SWR) with access door
S&F 110 mm bends PVC (SWR)
S&F 75 mm bends PVC (SWR)
S&F 110 mm cowl PVC (SWR)
S&F 75 mm cowl PVC (SWR)
M/S KANNANS
SHREE SAMARTH SERVICES
shubham Enterprises
MAHIMA CONSTRUCTION
M/s Lakhanpal construction company
SIDDHIVINAYAK ENTERPRISES
N.U. MIRZA
Vinod Enterprises
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .